- 13 Jan, 2011 40 commits
-
-
Alexandre Bounine authored
Change code to use one storage location common for switches and endpoints. This eliminates unnecessary device type checks during basic access operations. Logic that assigns destid to RIO devices stays unchanged - as before, switches use an associated destid because they do not have their own. Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Namhyung Kim authored
Commit 66fa12c5 ("ieee1394: remove the old IEEE 1394 driver stack") eliminated the only user of cdev_index(). So it can be removed too. Signed-off-by:
Namhyung Kim <namhyung@gmail.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Dave Anderson authored
Commit 34aacb29 ("procfs: Use generic_file_llseek in /proc/kcore") broke seeking on /proc/kcore. This changes it back to use default_llseek in order to restore the original behavior. The problem with generic_file_llseek is that it only allows seeks up to inode->i_sb->s_maxbytes, which is 2GB-1 on procfs, where the memory file offset values in the /proc/kcore PT_LOAD segments may exceed or start beyond that offset value. A similar revert was made for /proc/vmcore. Signed-off-by:
Dave Anderson <anderson@redhat.com> Acked-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: <stable@kernel.org> Signed-off-by:
-
Alexey Dobriyan authored
Filename is supposed to match procfile name for random junk. Add __init while I'm at it. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
For the common case where a proc entry is being removed and nobody is in the process of using it, save a LOCK/UNLOCK pair. Signed-off-by:
-
Petr Holasek authored
Add a PageSlab() check before adding the _mapcount value to /kpagecount. page->_mapcount is in a union with the SLAB structure so for pages controlled by SLAB, page_mapcount() returns nonsense. Signed-off-by:
Petr Holasek <pholasek@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Jovi Zhang authored
single_open()'s third argument is for copying into seq_file->private. Use that, rather than open-coding it. Signed-off-by:
Jovi Zhang <bookjovi@gmail.com> Acked-by:
David Rientjes <rientjes@google.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Alexey Dobriyan authored
- ->low_ino is write-once field -- reading it under locks is unnecessary. - /proc/$PID stuff never reaches pde_put()/free_proc_entry() -- PROC_DYNAMIC_FIRST check never triggers. - in proc_get_inode(), inode number always matches proc dir entry, so save one parameter. Signed-off-by:
-
Alexey Dobriyan authored
For string without format specifiers, use seq_puts(). For seq_printf("\n"), use seq_putc('\n'). text data bss dec hex filename 61866 488 112 62466 f402 fs/proc/proc.o 61729 488 112 62329 f379 fs/proc/proc.o ---------------------------------------------------- -139 Signed-off-by: -
Alexey Dobriyan authored
/proc/*/statm code needlessly truncates data from unsigned long to int. One needs only 8+ TB of RAM to make truncation visible. Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
Joe Perches authored
Use temporary lr for struct latency_record for improved readability and fewer columns used. Removed trailing space from output. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Joe Perches <joe@perches.com> Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by:
-
Trevor Woerner authored
The 'ns' cgroup is considered deprecated. Change the cgroup subsystem used in the examples of the cgroup documentation from 'ns' to 'blkio'. Signed-off-by:
Trevor Woerner <twoerner@gmail.com> Acked-by:
Li Zefan <lizf@cn.fujitsu.com> Acked-by:
Paul Menage <menage@google.com> Signed-off-by:
-
Rob Landley authored
Show how to install the "toggle wordwrap" extension in thunderbird. Signed-off-by:
Rob Landley <rlandley@parallels.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Lasse Collin authored
Signed-off-by:
Lasse Collin <lasse.collin@tukaani.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Jesper Juhl authored
A call to va_start() must always be followed by a call to va_end() in the same function. In fs/reiserfs/prints.c::print_block() this is not always the case. If 'bh' is NULL we'll return without calling va_end(). One could add a call to va_end() before the 'return' statement, but it's nicer to just move the call to va_start() after the test for 'bh' being NULL. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Acked-by:
Edward Shishkin <edward.shishkin@gmail.com> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Jesper Juhl authored
'struct befs_disk_data_stream' is huge (~144 bytes) and it's being passed by value in fs/befs/endian.h::cpu_to_fsrun(). It would be better to pass a pointer. Signed-off-by:
-
Andrew Morton authored
CC drivers/telephony/ixj.o drivers/telephony/ixj.c:287: warning: \u2018ixj_pci_tbl\u2019 defined but not used Reported-by:
-
Davide Libenzi authored
Send the events the wakeup refers to, so that epoll, and even the new poll code in fs/select.c can avoid wakeups if the events do not match the requested set. Signed-off-by:
Davide Libenzi <davidel@xmailserver.org> Acked-by:
David S. Miller <davem@davemloft.net> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <gregkh@suse.de> Signed-off-by:
-
Wolfram Sang authored
Because GPIOs can have crucial functions especially in embedded systems, we are better safe than sorry regarding their configuration. For gpio_request, the documentation is simply enforced: <quote>"The return value of gpio_request() must be checked."</quote> For gpio_direction_* and gpio_request_*, we now act accordingly. Signed-off-by:
-
Tomoya MORINAGA authored
ML7213 is a companion chip for Intel Atom E6xx series. This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output Hub) which is for IVI(In-Vehicle Infotainment) use. This driver can access the IOH's GPIO device. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Marc Zyngier <maz@misterjones.org> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Randy Dunlap authored
Fix kconfig dependency warning to satisfy dependencies: warning: (GPIO_VX855 && GPIOLIB) selects MFD_VX855 which has unmet direct dependencies (MFD_SUPPORT && PCI) Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by:
-
Randy Dunlap authored
Fix kconfig dependency warning to satisfy dependencies: warning: (GPIO_RDC321X && PCI && GPIOLIB) selects MFD_RDC321X which has unmet direct dependencies (MFD_SUPPORT && PCI) Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
Lennert Buytenhek <buytenh@secretlab.ca> Cc: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
Marc Zyngier <maz@misterjones.org> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
"Hennerich, Michael" <Michael.Hennerich@analog.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Andres Salomon authored
The newer drivers/gpio/cs5535-gpio.c replaces drivers/misc/cs5535_gpio.c. The new driver has been in the tree for a little while, and has received some testing; it's time to mark the old one as deprecated. I'm thinking removal around 2.6.40 would be good, provided we're not missing critical functionality in the newer driver. Signed-off-by:
Andres Salomon <dilinger@queued.net> Cc: Daniel Drake <dsd@laptop.org> Acked-by:
Ben Gardner <bgardner@wabtec.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Andres Salomon authored
Drop the old geode_gpio crud, as well as the raw outl() calls; instead, use the Linux GPIO API where possible, and the cs5535_gpio API in other places. Note that we don't actually clean up the driver properly yet (once loaded, it always remains loaded). That'll come later.. This patch is necessary for building the driver. Signed-off-by:
-
Andres Salomon authored
This adds (well, re-adds actually) handling for events/IRQs through cs5535 GPIOs. In the wild and wooly world of CS5535, setup_event() is for assigning an IRQ to a GPIO filter/event pair, and set_irq() sets up the pair to trigger IRQs. These should really only be used in highly platform-specific drivers (such as OLPC's DCON driver). Sadly, because set_irq() uses MSRs, this causes the driver to become X86-specific. Signed-off-by:
Daniel Drake <dsd@laptop.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Axel Lin authored
Current implementation does not set driver data in max6902_probe(), thus calling platform_get_drvdata(spi) in max6902_remove() returns NULL. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Paul Gortmaker authored
People stumble across the entry for the legacy PC specific RTC driver entry in MAINTAINERS when they really want the multi-arch, multi-driver RTC subsystem. So just delete the old entry that is causing the confusion. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Paul Fox authored
rtc-cmos was setting suspend/resume hooks at the device_driver level. However, the platform bus code (drivers/base/platform.c) only looks for resume hooks at the dev_pm_ops level, or within the platform_driver. Switch rtc_cmos to use dev_pm_ops so that suspend/resume code is executed again. Paul said: : The user visible symptom in our (XO laptop) case was that rtcwake would : fail to wake the laptop. The RTC alarm would expire, but the wakeup : wasn't unmasked. : : As for severity, the impact may have been reduced because if I recall : correctly, the bug only affected platforms with CONFIG_PNP disabled. Signed-off-by:
Paul Fox <pgf@laptop.org> Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Cc: <stable@kernel.org> [2.6.37.x] Signed-off-by:
-
Axel Lin authored
request_mem_region() will call kzalloc to allocate memory for struct resource. release_resource() unregisters the resource but does not free the allocated memory, thus use release_mem_region() instead to fix the memory leak. Also add a missing iounmap() in omap_rtc_remove(). Signed-off-by:
Mark A. Greer <mgreer@mvista.com> Signed-off-by:
-
