- 15 May, 2017 6 commits
-
-
Mintz, Yuval authored
Current memset is using incorrect type of variable, causing the upper-half of the strucutre to be left uninitialized and causing: ethernet/qlogic/qed/qed_init_fw_funcs.c: In function 'qed_set_rfs_mode_disable': ethernet/qlogic/qed/qed_init_fw_funcs.c:993:3: error: '*((void *)&ramline+4)' is used uninitialized in this function [-Werror=uninitialized] Fixes: d51e4af5 ("qed: aRFS infrastructure support") Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
Julia Lawall authored
Device node iterators put the previous value of the index variable, so an explicit put causes a double put. In particular, of_mdiobus_register can fail before doing anything interesting, so one could view it as a no-op from the reference count point of view. Generated by: scripts/coccinelle/iterators/device_node_continue.cocci CC: Jon Mason <jon.mason@broadcom.com> Signed-off-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Douglas Caetano dos Santos authored
When using a TX ring buffer, if an error occurs processing a control message (e.g. invalid message), the net_device reference is not released. Fixes c14ac945 ("sock: enable timestamping using control messages") Signed-off-by:
Douglas Caetano dos Santos <douglascs@taghos.com.br> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
yuval.shaia@oracle.com authored
Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Vlad Yasevich authored
Macvlan always turns on offload features that have sofware fallback (NETIF_GSO_SOFTWARE). This allows much higher guest-guest communications over macvtap. However, macvtap does not turn on these features for vlan tagged traffic. As a result, depending on the HW that mactap is configured on, the performance of guest-guest communication over a vlan is very inconsistent. If the HW supports TSO/UFO over vlans, then the performance will be fine. If not, the the performance will suffer greatly since the VM may continue using TSO/UFO, and will force the host segment the traffic and possibly overlow the macvtap queue. This patch adds the always on offloads to vlan_features. This makes sure that any vlan tagged traffic between 2 guest will not be segmented needlessly. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Niklas Cassel authored
There are two pointers in sysfs_display_ring, one that increments if using normal dma descriptors, another if using extended dma descriptors. When printing the normal dma descriptors, the wrong pointer is used, thus the printed descriptor addresses are incorrect. Signed-off-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
-
- 12 May, 2017 22 commits
-
-
Neil Horman authored
There are several paths in vmxnet3, where settings changes cause the adapter to be brought down and back up (vmxnet3_set_ringparam among them). Should part of the reset operation fail, these paths call vmxnet3_force_close, which enables all napi instances prior to calling dev_close (with the expectation that vmxnet3_close will then properly disable them again). However, vmxnet3_force_close neglects to clear VMXNET3_STATE_BIT_QUIESCED prior to calling dev_close. As a result vmxnet3_quiesce_dev (called from vmxnet3_close), returns early, and leaves all the napi instances in a enabled state while the device itself is closed. If a device in this state is activated again, napi_enable will be called on already enabled napi_instances, leading to a BUG halt. The fix is to simply enausre that the QUIESCED bit is cleared in vmxnet3_force_close to allow quesence to be completed properly on close. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Bert Kenward authored
The revision enum values (eg EFX_REV_HUNT_A0) form part of our API, and are included in ethtool. If these are inconsistent then ethtool will print garbage for a register dump (ethtool -d). Fixes: 5a6681e2 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver") Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Johan Hovold authored
Add the missing endianness conversions to a debug statement printing the USB device-descriptor idVendor and idProduct fields during probe. Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
Add missing endianness conversion when using the USB device-descriptor bcdDevice field to construct a firmware file name. Fixes: 8ef80aef ("[IRDA]: irda-usb.c: STIR421x cleanups") Cc: stable <stable@vger.kernel.org> # 2.6.18 Cc: Nick Fedchik <nfedchik@atlantic-link.com.ua> Signed-off-by:
-
Gustavo A. R. Silva authored
Add default case to switch in order to avoid any chance of using an uninitialized variable _low_, in case s->type does not match any of the listed case values. Addresses-Coverity-ID: 1398130 Suggested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Xin Long authored
Commit 0ca50d12 ("sctp: fix src address selection if using secondary addresses") has fixed a src address selection issue when using secondary addresses for ipv4. Now sctp ipv6 also has the similar issue. When using a secondary address, sctp_v6_get_dst tries to choose the saddr which has the most same bits with the daddr by sctp_v6_addr_match_len. It may make some cases not work as expected. hostA: [1] fd21:356b:459a:cf10::11 (eth1) [2] fd21:356b:459a:cf20::11 (eth2) hostB: [a] fd21:356b:459a:cf30::2 (eth1) [b] fd21:356b:459a:cf40::2 (eth2) route from hostA to hostB: fd21:356b:459a:cf30::/64 dev eth1 metric 1024 mtu 1500 The expected path should be: fd21:356b:459a:cf10::11 <-> fd21:356b:459a:cf30::2 But addr[2] matches addr[a] more bits than addr[1] does, according to sctp_v6_addr_match_len. It causes the path to be: fd21:356b:459a:cf20::11 <-> fd21:356b:459a:cf30::2 This patch is to fix it with the same way as Marcelo's fix for sctp ipv4. As no ip_dev_find for ipv6, this patch is to use ipv6_chk_addr to check if the saddr is in a dev instead. Note that for backwards compatibility, it will still do the addr_match_len check here when no optimal is found. Reported-by:
Patrick Talbert <ptalbert@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Florian Fainelli authored
The API convention makes it that a given MDIO bus reset should be able to access PHY devices in its reset() callback and perform additional MDIO accesses in order to bring the bus and PHYs in a working state. Commit 69226896 ("mdio_bus: Issue GPIO RESET to PHYs.") broke that contract by first calling bus->reset() and then release all PHYs from reset using their shared GPIO line, so restore the expected functionality here. Fixes: 69226896 ("mdio_bus: Issue GPIO RESET to PHYs.") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
We must accumulate into reg->aux_off rather than use a plain assignment. Add a test for this situation to test_align. Reported-by:
Alexei Starovoitov <ast@fb.com> Signed-off-by:
-
Jon Paul Maloy authored
The macro tipc_wait_for_cond() is embedding the macro sk_wait_event() to fulfil its task. The latter, in turn, is evaluating the stated condition outside the socket lock context. This is problematic if the condition is accessing non-trivial data structures which may be altered by incoming interrupts, as is the case with the cong_links() linked list, used by socket to keep track of the current set of congested links. We sometimes see crashes when this list is accessed by a condition function at the same time as a SOCK_WAKEUP interrupt is removing an element from the list. We fix this by expanding selected parts of sk_wait_event() into the outer macro, while ensuring that all evaluations of a given condition are performed under socket lock protection. Fixes: commit 365ad353 ("tipc: reduce risk of user starvation during link congestion") Reviewed-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Andy Gospodarek authored
Shahid Habib noticed that when xdp1 was killed from a different console the xdp program was not cleaned-up properly in the kernel and it continued to forward traffic. Most of the applications in samples/bpf cleanup properly, but only when getting SIGINT. Since kill defaults to using SIGTERM, add support to cleanup when the application receives either SIGINT or SIGTERM. Signed-off-by:
Andy Gospodarek <andy@greyhouse.net> Reported-by:
Shahid Habib <shahid.habib@broadcom.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Colin Ian King authored
The error status err is initialized as zero and then being checked several times to see if it is less than zero even when it has not been updated. It may seem that the err should be assigned to the return code of the call to the various *offload_en_set calls and then we check for failure, however, these functions are void and never actually return any status. Since these error checks are redundant we can remove these as well as err and the error exit label err_exit. Detected by CoverityScan, CID#1398313 and CID#1398306 ("Logically dead code") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Lino Sanfilippo <LinoSanfilippo@gmx.de> Acked-by:
Pavel Belous <pavel.belous@aquantia.com> Signed-off-by:
-
David S. Miller authored
Reported-by:
Alexander Alemayhu <alexander@alemayhu.com> Signed-off-by:
-
David S. Miller authored
Manish Chopra says: ==================== qlcnic: Bug fix and update version This series has one fix and bumps up driver version. Please consider applying to "net" ==================== Signed-off-by: -
Chopra, Manish authored
Bumping up the version as couple of fixes added after 5.3.65 Signed-off-by:
Manish Chopra <manish.chopra@cavium.com> Signed-off-by:
-
Chopra, Manish authored
Currently driver returns error on speed configurations for 83xx adapter's non XGBE ports, due to this link doesn't come up on the ports using 1000Base-T as a connector with autoneg disabled. This patch fixes this with initializing appropriate port type based on queried module/connector types from hardware before any speed/autoneg configuration. Signed-off-by:
-
Vitaly Kuznetsov authored
Unavoidable crashes in netfront_resume() and netback_changed() after a previous fail in talk_to_netback() (e.g. when we fail to read MAC from xenstore) were discovered. The failure path in talk_to_netback() does unregister/free for netdev but we don't reset drvdata and we try accessing it after resume. Fix the bug by removing the whole xen device completely with device_unregister(), this guarantees we won't have any calls into netfront after a failure. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Eric Dumazet authored
In commit 59cc1f61 ("net: sched: convert qdisc linked list to hashtable") we missed the opportunity to considerably speed up tc_dump_tclass_root() if a qdisc handle is provided by user. Instead of iterating all the qdiscs, use qdisc_match_from_root() to directly get the one we look for. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Yuchung Cheng authored
This patch fixes a bug in splitting an SKB during SACK processing. Specifically if an skb contains multiple packets and is only partially sacked in the higher sequences, tcp_match_sack_to_skb() splits the skb and marks the second fragment as SACKed. The current code further attempts rounding up the first fragment to MSS boundaries. But it misses a boundary condition when the rounded-up fragment size (pkt_len) is exactly skb size. Spliting such an skb is pointless and causses a kernel warning and aborts the SACK processing. This patch universally checks such over-split before calling tcp_fragment to prevent these unnecessary warnings. Fixes: adb92db8 ("tcp: Make SACK code to split only at mss boundaries") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Eric Dumazet authored
I should have known that lowering skb->truesize was dangerous :/ In case packets are not leaving the host via a standard Ethernet device, but looped back to local sockets, bad things can happen, as reported by Michael Madsen ( https://bugzilla.kernel.org/show_bug.cgi?id=195713 ) So instead of tweaking skb->truesize, lets change skb->destructor and keep a reference on the owner socket via its sk_refcnt. Fixes: f2f872f9 ("netem: Introduce skb_orphan_partial() helper") Signed-off-by:
Michael Madsen <mkm@nabto.com> Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== Two generic xdp related follow-ups Two follow-ups for the generic XDP API, would be great if both could still be considered, since the XDP API is not frozen yet. For details please see individual patches. v1 -> v2: - Implemented feedback from Jakub Kicinski (reusing attribute on dump), thanks! - Rest as is. ==================== Signed-off-by: -
Daniel Borkmann authored
While working on the iproute2 generic XDP frontend, I noticed that as of right now it's possible to have native *and* generic XDP programs loaded both at the same time for the case when a driver supports native XDP. The intended model for generic XDP from b5cdae32 ("net: Generic XDP") is, however, that only one out of the two can be present at once which is also indicated as such in the XDP netlink dump part. The main rationale for generic XDP is to ease accessibility (in case a driver does not yet have XDP support) and to generically provide a semantical model as an example for driver developers wanting to add XDP support. The generic XDP option for an XDP aware driver can still be useful for comparing and testing both implementations. However, it is not intended to have a second XDP processing stage or layer with exactly the same functionality of the first native stage. Only reason could be to have a partial fallback for future XDP features that are not supported yet in the native implementation and we probably also shouldn't strive for such fallback and instead encourage native feature support in the first place. Given there's currently no such fallback issue or use case, lets not go there yet if we don't need to. Therefore, change semantics for loading XDP and bail out if the user tries to load a generic XDP program when a native one is present and vice versa. Another alternative to bailing out would be to handle the transition from one flavor to another gracefully, but that would require to bring the device down, exchange both types of programs, and bring it up again in order to avoid a tiny window where a packet could hit both hooks. Given this complicates the logic for just a debugging feature in the native case, I went with the simpler variant. For the dump, remove IFLA_XDP_FLAGS that was added with b5cdae32 and reuse IFLA_XDP_ATTACHED for indicating the mode. Dumping all or just a subset of flags that were used for loading the XDP prog is suboptimal in the long run since not all flags are useful for dumping and if we start to reuse the same flag definitions for load and dump, then we'll waste bit space. What we really just want is to dump the mode for now. Current IFLA_XDP_ATTACHED semantics are: nothing was installed (0), a program is running at the native driver layer (1). Thus, add a mode that says that a program is running at generic XDP layer (2). Applications will handle this fine in that older binaries will just indicate that something is attached at XDP layer, effectively this is similar to IFLA_XDP_FLAGS attr that we would have had modulo the redundancy. Signed-off-by:
-
Daniel Borkmann authored
After commit b5cdae32 ("net: Generic XDP") we automatically fall back to a generic XDP variant if the driver does not support native XDP. Allow for an option where the user can specify that always the native XDP variant should be selected and in case it's not supported by a driver, just bail out. Signed-off-by:
-
- 11 May, 2017 12 commits
-
-
David S. Miller authored
We do not want to use the architecture's type.h header when building BPF programs which are always 64-bit. Signed-off-by: -
David S. Miller authored
David S. Miller says: ==================== bpf: Add alignment tracker to verifier. First we add the alignment tracking logic to the verifier. Next, we work on building up infrastructure to facilitate regression testing of this facility. Finally, we add the "test_align" test case. ==================== Signed-off-by: -
David S. Miller authored
Signed-off-by:
-
David S. Miller authored
This allows a test case to load a BPF program and unconditionally acquire the verifier log. It also allows specification of the strict alignment flag. Signed-off-by:
-
David S. Miller authored
Add a new field, "prog_flags", and an initial flag value BPF_F_STRICT_ALIGNMENT. When set, the verifier will enforce strict pointer alignment regardless of the setting of CONFIG_EFFICIENT_UNALIGNED_ACCESS. The verifier, in this mode, will also use a fixed value of "2" in place of NET_IP_ALIGN. This facilitates test cases that will exercise and validate this part of the verifier even when run on architectures where alignment doesn't matter. Signed-off-by:
-
David S. Miller authored
If log_level > 1, do a state dump every instruction and emit it in a more compact way (without a leading newline). This will facilitate more sophisticated test cases which inspect the verifier log for register state. Signed-off-by:
-
David S. Miller authored
Currently if we add only constant values to pointers we can fully validate the alignment, and properly check if we need to reject the program on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures. However, once an unknown value is introduced we only allow byte sized memory accesses which is too restrictive. Add logic to track the known minimum alignment of register values, and propagate this state into registers containing pointers. The most common paradigm that makes use of this new logic is computing the transport header using the IP header length field. For example: struct ethhdr *ep = skb->data; struct iphdr *iph = (struct iphdr *) (ep + 1); struct tcphdr *th; ... n = iph->ihl; th = ((void *)iph + (n * 4)); port = th->dest; The existing code will reject the load of th->dest because it cannot validate that the alignment is at least 2 once "n * 4" is added the the packet pointer. In the new code, the register holding "n * 4" will have a reg->min_align value of 4, because any value multiplied by 4 will be at least 4 byte aligned. (actually, the eBPF code emitted by the compiler in this case is most likely to use a shift left by 2, but the end result is identical) At the critical addition: th = ((void *)iph + (n * 4)); The register holding 'th' will start with reg->off value of 14. The pointer addition will transform that reg into something that looks like: reg->aux_off = 14 reg->aux_off_align = 4 Next, the verifier will look at the th->dest load, and it will see a load offset of 2, and first check: if (reg->aux_off_align % size) which will pass because aux_off_align is 4. reg_off will be computed: reg_off = reg->off; ... reg_off += reg->aux_off; plus we have off==2, and it will thus check: if ((NET_IP_ALIGN + reg_off + off) % size != 0) which evaluates to: if ((NET_IP_ALIGN + 14 + 2) % size != 0) On strict alignment architectures, NET_IP_ALIGN is 2, thus: if ((2 + 14 + 2) % size != 0) which passes. These pointer transformations and checks work regardless of whether the constant offset or the variable with known alignment is added first to the pointer register. Signed-off-by:
-
Daniel Borkmann authored
Shubham was recently asking on netdev why in arm64 JIT we don't multiply the index for accessing the tail call map by 8. That led me into testing out arm64 JIT wrt tail calls and it turned out I got a NULL pointer dereference on the tail call. The buggy access is at: prog = array->ptrs[index]; if (prog == NULL) goto out; [...] 00000060: d2800e0a mov x10, #0x70 // #112 00000064: f86a682a ldr x10, [x1,x10] 00000068: f862694b ldr x11, [x10,x2] 0000006c: b40000ab cbz x11, 0x00000080 [...] The code triggering the crash is f862694b. x1 at the time contains the address of the bpf array, x10 offsetof(struct bpf_array, ptrs). Meaning, above we load the pointer to the program at map slot 0 into x10. x10 can then be NULL if the slot is not occupied, which we later on try to access with a user given offset in x2 that is the map index. Fix this by emitting the following instead: [...] 00000060: d2800e0a mov x10, #0x70 // #112 00000064: 8b0a002a add x10, x1, x10 00000068: d37df04b lsl x11, x2, #3 0000006c: f86b694b ldr x11, [x10,x11] 00000070: b40000ab cbz x11, 0x00000084 [...] This basically adds the offset to ptrs to the base address of the bpf array we got and we later on access the map with an index * 8 offset relative to that. The tail call map itself is basically one large area with meta data at the head followed by the array of prog pointers. This makes tail calls working again, tested on Cavium ThunderX ARMv8. Fixes: ddb55992 ("arm64: bpf: implement bpf_tail_call() helper") Reported-by:Shubham Bansal <illusionist.neo@gmail.com> Signed-off-by:
-
Ivan Khoronzhuk authored
Fix error path while dma open channel issue. Also, no need to check output on NULL if it's never returned. Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/net fixes some qeth fixes for -net, the OSM/OSN one being the most crucial. Please also queue these up for stable. ==================== Signed-off-by: -
Ursula Braun authored
commit 5f78e29c ("qeth: optimize IP handling in rx_mode callback") added new hash tables, but missed to initialize them. Fixes: 5f78e29c ("qeth: optimize IP handling in rx_mode callback") Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Reviewed-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Access card->dev only after checking whether's its valid. Signed-off-by:
-
