- 31 May, 2016 22 commits
-
-
Masahiro Yamada authored
Upcoming new pinctrl drivers for PH1-LD11 and PH-LD20 support input signal gating for each pin. (While, existing ones only support it per pin-group.) This commit updates the core part for that. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Masahiro Yamada authored
The core part of the UniPhier pinctrl driver needs to support a new capability for upcoming UniPhier ARMv8 SoCs. This sometimes happens because pinctrl drivers include really SoC-specific stuff. This commit intends to tidy up SoC-specific parameters of the existing drivers before adding the new one. Having just one flag would be better than adding a new struct member every time a new SoC-specific capability comes up. At this time, there is one flag, UNIPHIER_PINCTRL_CAPS_DBGMUX_SEPARATE. This capability (I'd say rather quirk) was added for PH1-Pro4 and PH1-Pro5 as requirement from a customer. For those SoCs, one pin-mux setting is controlled by the combination of two separate registers; the LSB bits at register offset (8 * N) and the MSB bits at (8 * N + 4). Because it is impossible to update two separate registers atomically, the LOAD_PINCTRL register should be set in order to make the pin-mux settings really effective. Signed-off-by:
-
Masahiro Yamada authored
Unfortunately, the pin number of the new SoC, PH1-LD11, is not contiguous. The base frame work must be adjusted to support the new SoC pinctrl driver. The pin_desc_get() exploits radix-tree for pin look-up, so it works more efficiently with sparse pin space. Signed-off-by:
-
Masahiro Yamada authored
The new ARMv8 SoC, PH1-LD20, supports more fine-grained drive strength control. Drive strength of some pins are controlled by 3-bit width registers (8-level granularity). Signed-off-by:
-
Masahiro Yamada authored
The new ARMv8 SoC, PH1-LD20, supports more fine-grained drive strength control. Some of the configuration registers on it have 3-bit width. The feature will be supported in the next commit, but a problem is that macro names are getting longer and longer in the current naming scheme. Before moving forward, this commit renames macros as follows: UNIPHIER_PIN_DRV_4_8 -> UNIPHIER_PIN_DRV_1BIT UNIPHIER_PIN_DRV_8_12_16_20 -> UNIPHIER_PIN_DRV_2BIT UNIPHIER_PIN_DRV_FIXED_4 -> UNIPHIER_PIN_DRV_FIXED4 UNIPHIER_PIN_DRV_FIXED_5 -> UNIPHIER_PIN_DRV_FIXED5 UNIPHIER_PIN_DRV_FIXED_8 -> UNIPHIER_PIN_DRV_FIXED8 Signed-off-by:
-
Masahiro Yamada authored
Currently, every SoC driver defines struct pinctrl_desc statically, i.e. it consumes memory footprint even if it is not probed. In multi-platform, many pinctrl drivers are linked (generally as built-in objects), although only one of them is actually used. So, it is reasonable to allocate memory dynamically where possible. Signed-off-by:
-
Masahiro Yamada authored
Every SoC driver sets the same name for struct pinctrl_desc and platform_driver. The common probe function can set desc->name instead of duplicating strings in each SoC driver. Signed-off-by:
-
Masahiro Yamada authored
The owner of the struct pinctrl_desc matches that of platform_driver. Set it in the common probe function. Signed-off-by:
-
Masahiro Yamada authored
These pin tables were generated by parsing hardware documents with a script, but the script had a bug. Fix the register offsets. Signed-off-by:
-
Masahiro Yamada authored
Make function/variable names match the file names for consistency. Signed-off-by:
-
Masahiro Yamada authored
Without this, reading the "pins" in the debugfs causes kernel BUG. Fixes: 6e908892 ("pinctrl: UniPhier: add UniPhier pinctrl core support") Signed-off-by:
-
Peng Fan authored
To i.MX7D, there are two iomux controllers, iomuxc and iomuxc_lpsr. They should not share one pin controller descriptor, otherwise the value filled into imx_pinctrl_desc when probing the first iomux controller will be overridden when probing the second one. In this patch, discard the static allcoated imx_pinctrl_desc and switch to dynamically allcate pin controller descriptor for each iomux controller. Signed-off-by:
Peng Fan <van.freenix@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Stefan Agner <stefan@agner.ch> Cc: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Kevin Hilman authored
Add EE domain pins for ethernet interface. Acked-by:
Carlo Caione <carlo@endlessm.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Kevin Hilman authored
Add EE domain pins for UART A, B & C. Acked-by:
-
Kevin Hilman authored
Add EE domain pins for eMMC and SD card. Acked-by:
-
Kevin Hilman authored
Add pins for some more AO domain devices: UART_AO_B and I2C master & slave. Acked-by:
-
Masahiro Yamada authored
-ENOMEM is more suitable error code because kasprintf() fails in case of memory shortage. Signed-off-by:
-
Masahiro Yamada authored
gc_pinctrl_remove() calls platform_get_drvdata(), but I see neither platform_set_drvdata() nor dev_set_drvdata() anywhere in this driver. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Masahiro Yamada authored
To improve debugfs readability, use commas instead of whitespaces for separating configuration parameters. For example, the "pinconf-pins" dump on my board will change as follows: Without this commit: # head -5 pinconf-pins Pin config settings per pin Format: pin (name): configs pin 0 (ED0): input bias pull down output drive strength (8 mA) input enabled pin 1 (ED1): input bias pull down output drive strength (8 mA) input enabled pin 2 (ED2): input bias pull down output drive strength (8 mA) input enabled With this commit: # head -5 pinconf-pins Pin config settings per pin Format: pin (name): configs pin 0 (ED0): input bias pull down, output drive strength (8 mA), input enabled pin 1 (ED1): input bias pull down, output drive strength (8 mA), input enabled pin 2 (ED2): input bias pull down, output drive strength (8 mA), input enabled Signed-off-by:
-
Masahiro Yamada authored
Currently, struct pinctrl_pin_desc can have per-pin driver private data, but it is not copied to struct pin_desc. For a driver with sparse pin space, for-loop search like below would be necessary in order to get the driver-specific data for a desired pin number. for (i = 0; i < pctldev->desc->npins; i++) if (pin_number == pctldev->desc->pins[i].number) return pctldev->desc->pins[i].drv_data; This is not efficient for a driver with a large number of pins. So, copy the data to struct pin_desc when each pin is registered for the faster radix tree lookup. Signed-off-by: -
Masahiro Yamada authored
If a pin name is not specified in struct pinctrl_pin_desc, pinctrl_register_one_pin() dynamically assigns its name. So, desc->name is always a valid pointer here. Signed-off-by:
-
Patrice Chotard authored
As these 2 functions code are 95% similar, factorize them. Signed-off-by:
Patrice Chotard <patrice.chotard@st.com> Acked-by:
Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by:
-
- 30 May, 2016 8 commits
-
-
Krzysztof Kozlowski authored
Although unbinding a pinctrl driver requires root privileges but it still might be used theoretically in certain attacks (by triggering NULL pointer exception or memory corruption). Samsung pincontrol drivers are essential for system operation so their removal is not expected. They do not implement remove() driver callback and they are not buildable as modules. Suppression of the unbinding will prevent triggering NULL pointer exception like this (Odroid XU3): $ echo 13400000.pinctrl > /sys/bus/platform/drivers/samsung-pinctrl/unbind $ cat /sys/kernel/debug/gpio Unable to handle kernel NULL pointer dereference at virtual address 00000c44 pgd = ec41c000 [00000c44] *pgd=6d448835, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM (samsung_gpio_get) from [<c034f9a0>] (gpiolib_seq_show+0x1b0/0x26c) (gpiolib_seq_show) from [<c01fb8c0>] (seq_read+0x304/0x4b8) (seq_read) from [<c02dbc78>] (full_proxy_read+0x4c/0x64) (full_proxy_read) from [<c01d9fb0>] (__vfs_read+0x2c/0x110) (__vfs_read) from [<c01db400>] (vfs_read+0x8c/0x110) (vfs_read) from [<c01db4c4>] (SyS_read+0x40/0x8c) (SyS_read) from [<c01078c0>] (ret_fast_syscall+0x0/0x3c) Suggested-by:Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Neil Armstrong authored
Implement a get_direction callback for the OXNAS GPIO driver in order to have pin output polarity in debugfs and new userspace ABI. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Laxman Dewangan authored
MAXIM Semiconductor's PMIC, MAX77620/MAX20024 has 8 GPIO pins which also act as the special function in alternate mode. Also there is configuration like push-pull, open drain, FPS timing etc for these pins. Add pin control driver to configure these parameters through pin control APIs. Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by:
-
Laxman Dewangan authored
Maxim Semiconductor's PMIC MAX77620/MAX20024 has 8 GPIO pins which act as GPIO as well as special function mode. Add DT binding document to configure pins in function mode as well as pin configuration parameters. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Laxman Dewangan authored
Remove the use of parked_reg and use parked_bit for to know whether field is supported or not. This is fix for the patch commit 1d18a3f0 "pinctrl: tegra: avoid parked_reg and parked_bank Signed-off-by:
-
Linus Walleij authored
This reverts commit 0d535833.
-
Neil Armstrong authored
Add pinctrl and gpio DT bindings for Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by:
-
Neil Armstrong authored
Add pinctrl and gpio control support to Oxford Semiconductor OXNAS SoC Family. This version supports the ARM926EJ-S based OX810SE SoC with 34 IO pins. Signed-off-by:
-
- 29 May, 2016 3 commits
-
-
Linus Torvalds authored
-
George Spelvin authored
The self-test was updated to cover zero-length strings; the function needs to be updated, too. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
George Spelvin <linux@sciencehorizons.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
George Spelvin authored
The original name was simply hash_string(), but that conflicted with a function with that name in drivers/base/power/trace.c, and I decided that calling it "hashlen_" was better anyway. But you have to do it in two places. [ This caused build errors for architectures that don't define CONFIG_DCACHE_WORD_ACCESS - Linus ] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Fixes: fcfd2fbf ("fs/namei.c: Add hashlen_string() function") Signed-off-by:
-
- 28 May, 2016 7 commits
-
-
Mikulas Patocka authored
The HPFS filesystem used generic_show_options to produce string that is displayed in /proc/mounts. However, there is a problem that the options may disappear after remount. If we mount the filesystem with option1 and then remount it with option2, /proc/mounts should show both option1 and option2, however it only shows option2 because the whole option string is replaced with replace_mount_options in hpfs_remount_fs. To fix this bug, implement the hpfs_show_options function that prints options that are currently selected. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
Commit c8f33d0b ("affs: kstrdup() memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: c8f33d0b ("affs: kstrdup() memory handling") Signed-off-by:
-
Mikulas Patocka authored
Commit ce657611 ("hpfs: kstrdup() out of memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: ce657611 ("hpfs: kstrdup() out of memory handling") Signed-off-by:
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull more MIPS updates from Ralf Baechle: "This is the secondnd batch of MIPS patches for 4.7. Summary: CPS: - Copy EVA configuration when starting secondary VPs. EIC: - Clear Status IPL. Lasat: - Fix a few off by one bugs. lib: - Mark intrinsics notrace. Not only are the intrinsics uninteresting, it would cause infinite recursion. MAINTAINERS: - Add file patterns for MIPS BRCM device tree bindings. - Add file patterns for mips device tree bindings. MT7628: - Fix MT7628 pinmux typos. - wled_an pinmux gpio. - EPHY LEDs pinmux support. Pistachio: - Enable KASLR VDSO: - Build microMIPS VDSO for microMIPS kernels. - Fix aliasing warning by building with `-fno-strict-aliasing' for debugging but also tracing them might result in recursion. Misc: - Add missing FROZEN hotplug notifier transitions. - Fix clk binding example for varioius PIC32 devices. - Fix cpu interrupt controller node-names in the DT files. - Fix XPA CPU feature separation. - Fix write_gc0_* macros when writing zero. - Add inline asm encoding helpers. - Add missing VZ accessor microMIPS encodings. - Fix little endian microMIPS MSA encodings. - Add 64-bit HTW fields and fix its configuration. - Fix sigreturn via VDSO on microMIPS kernel. - Lots of typo fixes. - Add definitions of SegCtl registers and use them" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits) MIPS: Add missing FROZEN hotplug notifier transitions MIPS: Build microMIPS VDSO for microMIPS kernels MIPS: Fix sigreturn via VDSO on microMIPS kernel MIPS: devicetree: fix cpu interrupt controller node-names MIPS: VDSO: Build with `-fno-strict-aliasing' MIPS: Pistachio: Enable KASLR MIPS: lib: Mark intrinsics notrace MIPS: Fix 64-bit HTW configuration MIPS: Add 64-bit HTW fields MAINTAINERS: Add file patterns for mips device tree bindings MAINTAINERS: Add file patterns for mips brcm device tree bindings MIPS: Simplify DSP instruction encoding macros MIPS: Add missing tlbinvf/XPA microMIPS encodings MIPS: Fix little endian microMIPS MSA encodings MIPS: Add missing VZ accessor microMIPS encodings MIPS: Add inline asm encoding helpers MIPS: Spelling fix lets -> let's MIPS: VR41xx: Fix typo MIPS: oprofile: Fix typo MIPS: math-emu: Fix typo ... -
Guenter Roeck authored
Various builds (such as i386:allmodconfig) fail with fs/binfmt_aout.c:133:2: error: expected identifier or '(' before 'return' fs/binfmt_aout.c:134:1: error: expected identifier or '(' before '}' token [ Oops. My bad, I had stupidly thought that "allmodconfig" covered this on x86-64 too, but it obviously doesn't. Egg on my face. - Linus ] Fixes: 5d22fc25 ("mm: remove more IS_ERR_VALUE abuses") Signed-off-by: -
git://ftp.sciencehorizons.net/linuxLinus Torvalds authored
Pull string hash improvements from George Spelvin: "This series does several related things: - Makes the dcache hash (fs/namei.c) useful for general kernel use. (Thanks to Bruce for noticing the zero-length corner case) - Converts the string hashes in <linux/sunrpc/svcauth.h> to use the above. - Avoids 64-bit multiplies in hash_64() on 32-bit platforms. Two 32-bit multiplies will do well enough. - Rids the world of the bad hash multipliers in hash_32. This finishes the job started in commit 689de1d6 ("Minimal fix-up of bad hashing behavior of hash_64()") The vast majority of Linux architectures have hardware support for 32x32-bit multiply and so derive no benefit from "simplified" multipliers. The few processors that do not (68000, h8/300 and some models of Microblaze) have arch-specific implementations added. Those patches are last in the series. - Overhauls the dcache hash mixing. The patch in commit 0fed3ac8 ("namei: Improve hash mixing if CONFIG_DCACHE_WORD_ACCESS") was an off-the-cuff suggestion. Replaced with a much more careful design that's simultaneously faster and better. (My own invention, as there was noting suitable in the literature I could find. Comments welcome!) - Modify the hash_name() loop to skip the initial HASH_MIX(). This would let us salt the hash if we ever wanted to. - Sort out partial_name_hash(). The hash function is declared as using a long state, even though it's truncated to 32 bits at the end and the extra internal state contributes nothing to the result. And some callers do odd things: - fs/hfs/string.c only allocates 32 bits of state - fs/hfsplus/unicode.c uses it to hash 16-bit unicode symbols not bytes - Modify bytemask_from_count to handle inputs of 1..sizeof(long) rather than 0..sizeof(long)-1. This would simplify users other than full_name_hash" Special thanks to Bruce Fields for testing and finding bugs in v1. (I learned some humbling lessons about "obviously correct" code.) On the arch-specific front, the m68k assembly has been tested in a standalone test harness, I've been in contact with the Microblaze maintainers who mostly don't care, as the hardware multiplier is never omitted in real-world applications, and I haven't heard anything from the H8/300 world" * 'hash' of git://ftp.sciencehorizons.net/linux: h8300: Add <asm/hash.h> microblaze: Add <asm/hash.h> m68k: Add <asm/hash.h> <linux/hash.h>: Add support for architecture-specific functions fs/namei.c: Improve dcache hash function Eliminate bad hash multipliers from hash_32() and hash_64() Change hash_64() return value to 32 bits <linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string() fs/namei.c: Add hashlen_string() function Pull out string hash to <linux/stringhash.h> -
George Spelvin authored
This will improve the performance of hash_32() and hash_64(), but due to complete lack of multi-bit shift instructions on H8, performance will still be bad in surrounding code. Designing H8-specific hash algorithms to work around that is a separate project. (But if the maintainers would like to get in touch...) Signed-off-by:
-
