- 13 Dec, 2004 32 commits
-
-
Johannes Stezenbach authored
emard<at>softhome!net discovered an embarrasing bug in dvb_net.c where the NET_REMOVE_IF ioctl will cause an Oops when called with an invalid interface number. Signed-off-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Bjorn Helgaas authored
The hisax driver looks at dev_avm->irq before calling pci_enable_device(), which means it requests the wrong IRQ. This patch fixes it. Thanks to Thorsten Doil for reporting the problem and testing the fix. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Andrew Morton authored
Avoid documenting something which isn't there. Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
James Nelson authored
Add some configuration information to Documentation/rocket.txt that was included with the external driver package. Signed-off-by:
James Nelson <james4765@gmail.com> Signed-off-by:
-
Magnus Damm authored
I recently learnt that limiting RAM with by using only "mem=xxxM" is no good on machines equipped with PCI. In my case (vanilla 2.6.9) the cardbus bridge on my laptop got mapped to the unused RAM area which resulted in wierd errors due to the collision. The right solution is to use "mem=" together with "memmap=" to mark the unused RAM area reserved. Henceforth I force the kernel to use 2016MiB by passing "mem=2016M memmap=32M#2016M" instead of just "mem=2016M". Signed-off-by:
-
sundarapandian@gmail.com authored
Signed-off-by:
-
Michael Hunold authored
- av7110: fixed av7110_before_after_tune()/av7110_fe_lock_fix(): firmware >= 261d: wait for empty message queue, firmware <= 261c: wait 50ms - av7110: add __user and __iomem annotations, remove some unnecessary cast (patch by C.Y.M) - av7110: __av7110_send_fw_cmd(): added some sanity checks suggested by Werner Fin - av7110: added support for full-featured DVB-C cards: 13c2:0000 Siemens DVB-C (full-length card) VES1820/Philips CD1516 and 13c2:0003 Haupauge DVB-C 2.1 VES1820/ALPS TDBE2 - av7110: follow saa7146 changes, remove superflous casts, and other misc. minor cleanups - av7110: Fixed race condition between driver and av7110 while accessing the COMMAND register in DPRAM. See http://www.linuxtv.org/mailinglists/vdr/2004/01-2004/msg00331.html - budget: various cleanups by Adrian bunk Signed-off-by:
Michael Hunold <hunold@linuxtv.org> Signed-off-by:
-
Michael Hunold authored
- dib3000: support for dynamically i2c addresses of the demod - tda1004x: fixed firmware upload problems, forgot to include tune_settings for tda1004x, added setting to allow inversion of OCLK, set fesettings->min_delay_ms = 800 as suggested by Peter Siering - stv0297: code cleanup - mt312: added vp310 support - mt352: decrease verbosity Signed-off-by:
-
Michael Hunold authored
- dvb-core: remove unused frequency bending code, simplify internal frontend handling - dvb-net: add ULE dvb-net support according to draft-ietf-ipdvb-ule-03 Signed-off-by:
-
Michael Hunold authored
- added new usb ids for some more clones - added option to deliver the complete TS with USB2.0 devices - added support for the dib3000mc/p frontend driver Signed-off-by:
-
Michael Hunold authored
- B2C2: move generic b2c2 code a separate module, added basic b2c2-usb support - [DVB] Skystar2: add mt312/vp310 support Signed-off-by:
-
Michael Hunold authored
- saa7146: prefix IER_DISABLE and IER_ENABLE with SAA7146_, add SAA7146_ISR_CLEAR - dvb-bt8xx/dst: fix typo - cinergyT2: locking in SET_PARAMETERS and some VDR compatibility code for GET_EVENT (thanks to Stefan Lucke) Signed-off-by:
-
Matt Mackall authored
This patch fixes a problem where /dev/urandom can return duplicate values when two processors read from it at the same time. It relies on the fact that we already are taking a lock in add_entropy_words(), and atomically hashes in some freshly mixed in data into the returned randomness. Signed-off-by:
Matt Mackall <mpm@selenic.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Pavel Machek authored
This fixes types so that sparse has less stuff to complain about. Signed-off-by:
-
Pavel Machek authored
Fixes typo in header, please apply, Signed-off-by:
-
Pavel Machek authored
This fixes confusing printk. Signed-off-by:
-
Pavel Machek authored
This fixes memory leak when we are low on memory during suspend. Ouch and nr_needed_pages is only used twice, and only written :-(. I guess that can wait for 2.6.10. Signed-off-by:
-
Pavel Machek authored
This prevents oops when not enough memory is available during resume. Signed-off-by:
-
Pawel Sikora authored
Fix the below: drivers/atm/zatm.c:1608: error: invalid lvalue in assignment drivers/atm/iphase.c:623: error: invalid storage class for function 'ia_pkt_tx' drivers/cdrom/sbpcd.c: In function 'get_state_T': drivers/cdrom/sbpcd.c:1168: error: invalid storage class for function 'cmd_out_T' drivers/cdrom/sbpcd.c: In function 'cmd_out_T': drivers/cdrom/sbpcd.c:1317: error: invalid storage class for function 'cc_DriveReset' drivers/media/video/saa7134/saa7134-core.c:90: error: static declaration of 'saa7134_devcount' follows non-static declaration drivers/media/video/saa7134/saa7134.h:479: error: previous declaration of 'saa7134_devcount' was here drivers/net/acenic.c:488: error: invalid storage class for function 'ace_watchdog' Signed-off-by:
-
Tom Rini authored
As of 2.6.10-rc3, the following is needed to allow various userland packages (sysvinit, dhcp, ppp, libcap, libpcap, lilo) to compile as parts that userland needs (e.g. for ioctls) is in files with stuff userland isn't allowed to see. This adds __KERNEL__ around <linux/ata.h> and some defines (<linux/ata.h> isn't needed by userland, and is unhappy right now). sysvinit and some other packages need <linux/hdreg.h> for HDIO_DRIVE_CMD and other IOCTL things. In <linux/types.h> we were unsafely typedef'ing __le64/__be64 as __u64 only exists when __GNUC__ && !__STRICT_ANSI__ (causing libcap to fail, for example). Finally, <asm/atomic.h> provides routines userland simply cannot use on all arches, but <linux/filter.h> is needed by iputils for example. While not all arches put __KERNEL__ around their header, on MIPS including this header currently blows up the build. Signed-off-by:
Tom Rini <trini@kernel.crashing.org> Signed-off-by:
-
Bjorn Helgaas authored
Document how Linux/ia64 names serial devices and how to use them as console devices. Signed-off-by:
-
Anton Blanchard authored
It turns out there are more issues with our VPA code: 1. vpa_init doesnt report errors when it fails. This was masking a bug where the VPA spanned 2 pages and phyp failed to register it. 2. We call idle_setup before we initialise the boot cpus vpa. This means we never select the shared processor idle loop. 3. We dont call vpa_init on UP kernels. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
ppc64 has a global called "pci_probe_only" which, when set, prevents the arch PCI code from calling pci_assign_unassigned_resources(). This was cleared by pmac so far, but a bug in the definition of the variable make that ineffective until 2.6.10, and so we never called pci_assign_unassigned_resources(). With 2.6.10, that bug was fixed and so we now call it, which results in some problems. Some devices who have perfectly valid assigned addresses by firmware end up beeing moved around anyway, which is a BAD thing can can break boot on some machines since it breaks the relationship between addresses in Open Firmware device-tree and actual location of PCI devices. (Some low level things like the PIC are ioremap'ed based on their OF address, way before the PCI based ASIC hosting them has been found). This also break the "offb" default framebuffer driver since the video card ends up beeing moved around as well. For now, the fix is to set pci_probe_only on pmac, thus reverting to the old behaviour. In the long run, it would be interesting to "fix" pci_assign_unassigned_resources() so that it does what it's name claims, and only assigns things that have been left unassigned instead of moving things around gratuituously... Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Hugh Dickins authored
Sometimes /proc/<pid>/status shows VmLib: 42949..... kB. mprotect_fixup must note oldflags on entry: if vma_merge is successful, vma->vm_flags afterwards may be either the oldflags or the newflags, and the extent of the change will be less than the extent of the vma. And let's use unsigned long for these flags throughout. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Acked-by:
William Lee Irwin III <wli@holomorphy.com> Signed-off-by:
-
Hugh Dickins authored
In some cases /proc/<pid>/status shows VmLib: 42949..... kB. If READ_IMPLIES_EXEC then the break area is VM_EXEC, but omitted from exec_vm since do_brk contains no __vm_stat_account call. Later munmaps count its pages out of exec_vm, hence (exec_vm - VmExe) can go negative. do_brk is right not to call __vm_stat_account, its pages shouldn't need to be counted. What's wrong is that __vm_stat_account is counting all the VM_EXEC pages, whereas (to mimic 2.4 and earlier 2.6) it should be leaving VM_WRITE areas and non-vm_file areas out of exec_vm. VmLib may still appear larger than before - where a READ_IMPLIES_EXEC personality makes what was a readonly mapping of a file now executable e.g. /usr/lib/locale stuff. And a program which mprotects its own text as writable will appear with wrapped VmLib: sorry, but while it's worth showing ordinary programs as ordinary, it's not worth much effort to avoid showing odd ones as odd. Signed-off-by:
-
Hugh Dickins authored
Michael Kerrisk has observed that at present any process can SHM_LOCK any shm segment of size within process RLIMIT_MEMLOCK, despite having no permissions on the segment: surprising, though not obviously evil. And any process can SHM_UNLOCK any shm segment, despite no permissions on it: that is surely wrong. Unless CAP_IPC_LOCK, restrict both SHM_LOCK and SHM_UNLOCK to when the process euid matches the shm owner or creator: that seems the least surprising behaviour, which could be relaxed if a need appears later. Signed-off-by:
-
Gerd Knorr authored
ObviouslyCorrect[tm] buildfix ;) Signed-off-by:
Gerd Knorr <kraxel@bytesex.org> Signed-off-by:
-
Heiko Carstens authored
The patch below fixes an ext2/ext3 memory leak: the *_fill_super functions allocate percpu data structures but don't free them in *_put_super. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Andrew Morton authored
Use pid_alive() rather than testing for a zero value of ->pid. Is the right thing to do and addresses an oops dereferencing real_parent which one person reported. Signed-off-by:
-
David Brownell authored
When drives go offline, e.g. usb-storage disconnect, the upper layers don't behave very intelligently yet: ext3 over scsi keeps retrying reads, logging three lines for each error: 10:58:31 scsi0 (0:0): rejecting I/O to dead device 10:58:31 EXT3-fs error (device sda1): ext3_find_entry: reading directory #18089296 offset 0 10:58:31 10:59:47 EXT3-fs error (device sda1): ext3_find_entry: reading directory #18089296 offset 0 This patch shrinks that log spam by the trivial third, getting rid of those needless blank lines. It's not clear to me why the "no such device" errors don't immediately make ext3 (or is it the block layer?) give up ... maybe someone else can make Linux not retry after those errors. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Andrew Morton authored
We need to set the PF_SYNCWRITE when performing direct-io writes. Otherwise the anticipatory scheduler exhibits bad read-starves-write problems. Signed-off-by:
-
Paul Mackerras authored
Recently I tried booting a UP kernel on a 1-processor logical partition on a POWER4 system. It failed because the CPU we happened to be running on was CPU 2, but hard_smp_processor_id() is defined to 0 for !CONFIG_SMP. (Note that this code runs quite early, as part of init_IRQ, so hard_smp_processor_id() should be the physical ID of the boot cpu.) This patch does a minimal fix to make it work. I think this patch should go in 2.6.10. Ultimately I think the hard_smp_processor_id() definition should be removed from include/linux/smp.h, but that carries a risk of breaking other architectures and probably shouldn't be done pre 2.6.10. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
- 12 Dec, 2004 8 commits
-
-
Jens Axboe authored
Found a subtle bug that caused mount errors on a SATA drive with barriers on reiser and ext3, where it should have recovered and just turned off barriers. The problem is that the EOPNOTSUPP error isn't being propagated properly to the bounced bio. This patch fixes that by correctly passing error all the way down. Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Paul Mackerras authored
This patch is from Will Schmidt <willschm@us.ibm.com>, with some extra comments from me. On iSeries and on POWER5 machines, there is a data structure which is used for communication between the hypervisor and the kernel, called the `lppaca'. The kernel tells the hypervisor where it is, and the hypervisor requires that it doesn't cross a page boundary. With other changes in the last few months we have ended up with a situation where it could cross a page boundary. This patch increases the alignment requirement for the struct to make sure that it can't cross a page boundary. This is a bug fix and should go into 2.6.10. Signed-off-by:
Will Schmidt <willschm@us.ibm.com> Signed-off-by:
-
bk://cifs.bkbits.net/linux-2.5cifsLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Steve French authored
allowing buffer size to be changed Signed-off-by: Steve French (sfrench@us.ibm.com)
-
-
-
Adrian Bunk authored
The patch below by "Petri T. Koistinen" <petri.koistinen@iki.fi> in Rusty's trivial patches is IMHO a candidate for 2.6.10 . Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
-
