From: Will Dyson <will_dyson@pobox.com>

Add documentation and comments to lib/parser.c and include/linux/parser.h

From: Alan Cox <alan@redhat.com>

Capability elevation bug in 2.6.0 IDE. Long fixed in 2.4.x, trivial to cure

From: Alan Cox <alan@redhat.com>

IDE core code had the mmio==2 (ioremap) mode supported but two small changes
had been missed for ide-dma.c.  Without this fix mmio IDE controllers bomb if
you have plenty of memory as it uses request_mem_region on an ioremap return.

From: Peter Chubb <peterc@gelato.unsw.edu.au>

If you try to disable IDE DMA from Kconfig, you'll end up with an undefined
symbol, ide_hwif_setup_dma().

The attached rather ugly patch fixes the problem by defining a dummy
function.

From: Peter Chubb <peterc@gelato.unsw.edu.au>

The PIIX5 IDE controller on I2000 IA64 boxen using the 460GX chipset will
hang on startup if an ordinary harddrive is plugged into it (it seems to
workj for the LSI120 and the CDROM drives).

This is because the 460GX chipset contains a PCI expanssion bridge that
works like the 450NX PXB, and has the same PCI ID (but a later revision).
The PIIX driver, to work around interactions between PIIX4 and the 450NX
PXB, tries to disable DMA.

Unfortunately, the way it tries to disable DMA doesn't work, and the higher
layers think that DMA is still on, and so timeout waiting for DMA, and then
hang on bootup.

A simple workaround is to tighten the check for the buggy chipset, as in
the attached patch.  However, someone with more time (and who actually
*understands* the IDE subsystem) needs to fix the real bug as well.

From: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>,
      Stuart Hayes <stuart_hayes@dell.com>

- Check drive's write protect bit, try to return appropriate
  errors when attempting to write a write-protected tape.

- Moved "idetape_read_position" call in idetape_chrdev_open
  after the "wait_ready" call.

- Added IDETAPE_MEDIUM_PRESENT flag so driver would know
  not to rewind tape after ejecting it.

- Fixed bug with ide_abort_pipeline (it was deleting stages
  from tape->next_stage to end, instead of from
  new_last_stage->next (tape->next_stage was set to NULL
  by idetape_discard_read_pipeline before calling!).

- Made improvements to idetape_wait_ready.

- Added a few comments here and there.

- Made MTOFFL unlock tape drive door before attempting to eject.

- Added fixes to get Seagate STT3401A Travan working:
  Handle drives that don't support 0-length reads/writes increased timeout
  (retension takes ~10 minutes before irq is returned).
  Fixed request mode page packet command byte 3.

Also remove code depending on NO_LONGER_REQUIRED to match 2.4.x (me).

From: Arun Sharma <arun.sharma@intel.com>

- Several instances where we were using pid_t instead of uid_t

- If the caller passed a NULL `oldact' pointer into sys_sigprocmask then
  don't try to write the old sigmask there.

From: gleb@nbase.co.il (Gleb Natapov)

There is inconsistency in fops->write() implementation in different
watchdog drivers.  Some of them return number of bytes written while others
return 1.

I think the correct implementation should always return number of bytes
written (we examine all the buffer after all) otherwise "echo V >
/dev/watchdog" doesn't work as expected (it doesn't stop watchdog).

From: Olaf Hering <olh@suse.de>

We need to update `offset' here so that the subsequent push_pad() (which
uses `offset') will do the right thing.

From: Valdis.Kletnieks@vt.edu

Nick wrote a nice as-iosched.txt file, but apparently nobody updated the
kernel-parameters.txt file...

From: Jeremy Fitzhardinge <jeremy@goop.org>

I've been getting quite a lot of people mailing me about this CPU.  It
seems Toshiba has released a machine with it.  It would be nice if this
patch gets into a kernel soonish.  It's very low-impact.

- Add missing PCI ID

- Forward-port IRQ routing workaround from 2.4.

From: corbet@lwn.net (Jonathan Corbet)

This converts all architectures' /proc/interrupts implementation over to
seq_file.  We need this for SMP machines with ridiculous numbers of CPUs and
if you convert one arch, you have to convert them all...

From: Adrian Bunk <bunk@fs.tum.de>

The legacy eicon driver in drivers/isdn/eicon is the old one and will be
removed as soon as all features went to the new driver.  Anyway this old
driver was never meant to be non-module.

From: Adrian Bunk <bunk@fs.tum.de>

the issue below is only a minor documentation fix, but it has confused
me when configuring a kernel for such a card.

From: Ingo Molnar <mingo@elte.hu>

Clarify a comment in the CPU scheduler.

From: Martin Hicks <mort@wildopensource.com>

Once NR_CPUS exceeds about 300 ext2 and ext3 will not compile, because the
percpu counters in the superblocks are so huge that they cannot be kmalloced.

Fix this by converting the percpu_counter mechanism to use alloc_percpu()
rather than an NR_CPUS-sized array.

From: Manfred Spraul <manfred@colorfullife.com>

attached is the lockless semop patch. I did another test run with 
idle=poll on an pentium III, and it remained unchanged: 99.9% direct 
fast path, 0.1% race with wakeup against writing the final result code:

http://khack.osdl.org/stp/282936/environment/proc/slabinfo

That means there is no immediate need to add the two-stage
implementation to finish_wait.

It reduces the spinlock operations on the semaphore array spinlock by 1/3.

From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>

Current writev() of pipe/fifo can be interleaved with data from other
processes doing writes even when the requests size is <= PIPE_BUF.  These
writes should in fact be atomic.

The readv() side is also supported for same behavior with read().  And it
is faster.

readv/writev version of bw_pipe in LMbench

2.6.0-test9-bk12
hirofumi@devron (i686-pc-linux-gnu)[1010]$ ./bw_pipe -m 4096 -M 5
Pipe bandwidth: 45.53 MB/sec
hirofumi@devron (i686-pc-linux-gnu)[1009]$ ./bw_pipe -m 1024 -M 5
Pipe bandwidth: 20.08 MB/sec

2.6.0-test9-bk12 + patch
hirofumi@devron (i686-pc-linux-gnu)[1001]$ ./bw_pipe -m 4096 -M 5
Pipe bandwidth: 65.98 MB/sec
hirofumi@devron (i686-pc-linux-gnu)[1002]$ ./bw_pipe -m 1024 -M 5
Pipe bandwidth: 32.19 MB/sec

From: Manfred Spraul <manfred@colorfullife.com>

The memmove implementation of i386 is not optimized: it uses movsb, which is
far slower than movsd.  The optimization is trivial: if dest is less than
source, then call memcpy().  markw tried it on a 4xXeon with dbt2, it saved
around 300 million cpu ticks in cache_flusharray():

oprofile, GLOBAL_POWER_EVENTS, count 100k
Before:
c0144ed1 <cache_flusharray>: /* cache_flusharray total:  21823  0.0165 */
     6 4.5e-06 :c0144f8e:       cmp    %esi,%ebx
    11 8.3e-06 :c0144f90:       jae    c0144f9e <cache_flusharray+0xcd>
     3 2.3e-06 :c0144f92:       mov    %ebx,%edi
  7305  0.0055 :c0144f94:       repz movsb %ds:(%esi),%es:(%edi)
   201 1.5e-04 :c0144f96:       add    $0x10,%esp

After:
c0144f1d <cache_flusharray>: /* cache_flusharray total:  17959  0.0136 */
  1270 9.6e-04 :c0144f1d:       push   %ebp
[snip]
     6 4.6e-06 :c0144fdc:       cmp    %esi,%ebx
    13 9.9e-06 :c0144fde:       jae    c0145000 <cache_flusharray+0xe3>
     2 1.5e-06 :c0144fe0:       mov    %edx,%eax
     1 7.6e-07 :c0144fe2:       mov    %ebx,%edi
    11 8.4e-06 :c0144fe4:       shr    $0x2,%eax
     1 7.6e-07 :c0144fe7:       mov    %eax,%ecx
  4129  0.0031 :c0144fe9:       repz movsl %ds:(%esi),%es:(%edi)
   261 2.0e-04 :c0144feb:       test   $0x2,%dl
    27 2.1e-05 :c0144fee:       je     c0144ff2 <cache_flusharray+0xd5>
               :c0144ff0:       movsw  %ds:(%esi),%es:(%edi)
    95 7.2e-05 :c0144ff2:       test   $0x1,%dl
    96 7.3e-05 :c0144ff5:       je     c0144ff8 <cache_flusharray+0xdb>
               :c0144ff7:       movsb  %ds:(%esi),%es:(%edi)
   121 9.2e-05 :c0144ff8:       add    $0x1c,%esp

From: jbarnes@sgi.com (Jesse Barnes)

Now that we have a proper NODES_SHIFT value, we need to use it to define
ZONE_SHIFT otherwise we'll spill over 8 bits if we have more than 85 nodes.

From: Paul Jackson <pj@sgi.com>

The patch is needed to build NR_CPUS > 256.

Without this fix, you get compile errors:
    include/linux/cpumask.h: In function `next_online_cpu':
    include/linux/cpumask.h:56: structure has no member named `val'

From: Zwane Mwaikambo <zwane@arm.linux.org.uk>

Make the test unconditional - we can always run it now we have fixmap
support.

The seq_file conversion of /proc/pid/maps caused altered behaviour with
respect to 2.4.22.  Before the conversion, spaces and tabs in filenames were
displayed verbatim.  After the conversion they are escaped as \040, etc.

Also, if the mmapped file has been unlinked the output appears as

40017000-40018000 rw-p 00000000 03:02 1425800    /home/akpm/foo\040(deleted)

instead of

40017000-40018000 rw-p 00000000 03:02 1425800    /home/akpm/foo (deleted)

This could break applications which parse /proc/pid/maps (one person has
reported this).

The patch restores the 2.4.20 behaviour.

From: "Bryan O'Sullivan" <bos@pathscale.com>

The current version of modpost breaks if invoked from outside the build
tree.  This patch fixes that, and simplifies the code a bit while it's at
it.

From: john stultz <johnstul@us.ibm.com>

The patch arranges for each timesource type to have a name, and uses that to
tell the user which timesource is in use at bootup time.

zone->refill_counter is only there to provide decent levels of work batching:
don't call refill_inactive_zone() just for a couple of pages.

But the logic in there allows it to build up to huge values and it can
overflow (go negative) which will disable refilling altogether until it wraps
positive again.

Just reset it to zero whenever we decide to do some refilling.

From: Bjorn Helgaas <bjorn.helgaas@hp.com>

uart_set_options() can dereference a null pointer.  This happens if you
specify a console that hasn't previously been setup by early_serial_setup().

For example, on ia64, the HCDP typically tells us about line 0, so we calls
early_serial_setup() for it.  If the user specifies "console=ttyS3", we
machine-check when trying to follow the uninitialized port->ops pointer.

It's not entirely clear to me whether we should return 0 or -ENODEV or
something.  The advantage of returning zero is that if the user specifies
"console=ttyS0" and we just lack the HCDP, the console doesn't work as early
as usual, but it does start working after the serial driver detects the port
(though the baud/parity/etc from the command line are lost).  Returning
-ENODEV seems to prevent it from ever working.

From: Brian Gerst <bgerst@didntduck.org>

The current code disables sysenter when first entering vm86 mode, but does
not disable it again when coming back to a vm86 task after a task switch.

From: Adrian Bunk <bunk@fs.tum.de>

Allow the kernel to be built with `-Os'.

It requires CONFIG_EMBEDDED.  This is to make it "hard to get at" because
one gcc version (3.2.x I think) from RH9 generates crashy kernels with this
option set.

From: Manfred Spraul <manfred@colorfullife.com>

Fixes a race between proc_pid_lookup and sys_exit.

- The inodes and dentries for /proc/<pid>/whatever are cached in the dentry
  cache.  d_revalidate is used to protect against stale data: d_revalidate
  returns invalid if the task exited.

  Additionally, sys_exit flushes the dentries for the task that died -
  otherwise the dentries would stay around until they arrive at the end of
  the LRU, which could take some time.  But there is one race:

  - proc_pid_lookup finds a task and prepares new dentries for it. It must 
    drop all locks for that operation.
  - the process exits, and the /proc/ dentries are flushed. Nothing
    happens, because they are not yet in the hash tables.
  - proc_pid_lookup adds the task to the dentry cache.

  Result: dentry of a dead task in the hash tables.

  The patch fixes that problem by flushing again if proc_pid_lookup notices
  that the thread exited while it created the dentry.  The patch should go
  in, but it's not critical.


- task->proc_dentry must be the dentry of /proc/<pid>.  That way sys_exit
  can flush the whole subtree at exit time.  proc_task_lookup is a direct
  copy of proc_pid_lookup and handles /proc/<>/task/<pid>.  It contains the
  lines that set task->proc_dentry.  This is bogus, and must be removed.

  This hunk is much more critical, because creates a de-facto dentry leak
  (they are recovered after flushing real dentries from the cache).

From: Russell King <rmk@arm.linux.org.uk>

This oops has been caused by the need to register the class before
registering any objects against it.  Unfortunately, the class needs
to be registered asynchronously in a separate thread to avoid driver
model deadlock with yenta with cardbus cards inserted or standard
PCMCIA cards not being detected correctly due to a race.

I think the only real solution is to remove the class_device_create_file
calls from all socket drivers.  This is just a simple commenting out of
the calls, and should be suitable for the remainder of the -test kernels.

Due to the number of cases that we're encountering with PCMCIA, I'm
beginning to wonder if the driver model could be fixed to be more kind
to PCMCIA by avoiding some of these ordering dependencies.  None of this
would be a problem if the driver model would allow PCI device drivers to
register PCI devices while their probe or remove functions were executing.

From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>

- use "select" instead of "depend"

- remove the unused SMB_NLS

- remove unneeded "default y" of CONFIG_NLS

- revert to postion of nls menu (middle of filessytem menus is strange)

- fix "#ifdef CONFIG_NLS" on UDF (should this add new one to Kconfig?)

This fixes the recently-reported "fsstress memory leak" problem.  It has been
there since November 2002.

shrink_dcache() has a heuristic to prevent the dcache (and hence icache) from
getting shrunk too far: it refuses to allow the dcache to shrink below
2*nr_used.

Problem is, _all_ non-leaf dentries (directories) count as used.  So when you
have really deep directory hierarchies (fsstress creates these), nr_used is
really high, and there is no upper bound to the amount of pinned dcache.

The patch just rips out the heuristic.  This means that dcache (and hence
icache (and hence pagecache)) will be shrunk more aggressively.  This could
be a problem, and tons of testing is needed - a new heuristic may be needed.

However I am not able to reproduce the problem which cause me to add this
heuristic in the first place:

   Simple testcase: run a huge `dd' while running a concurrent `watch -n1
   cat /proc/meminfo'.  The program text for `cat' gets loaded from disk once
   per second.

It is doing a set_fs(KERNEL_DS) for no obvious reason.

Spotted by margitsw@t-online.de (Margit Schubert-While)

Sometimes kjournald has to refile a huge number of buffers, because someone
else wrote them out beforehand - they are all clean.

This happens under a lock and scheduling latencies of 88 milliseconds on a
2.7GHx CPU were observed.

The patch forward-ports a little bit of the 2.4 low-latency patch to fix this
problem.

Worst-case on ext3 is now sub-half-millisecond, except for when the RCU
dentry reaping softirq cuts in :(

It calls __init functions anyway.

The cdrom driver does an order-4 allocation and the open will fail if that
allocation does not succeed.  This happened to me on an unstressed 900MB
machine.

So add the __GFP_REPEAT flag in there - this will cause the page allocator to
keep on freeing pages until the allocation succeeds.

It can in theory livelock but in practice I expect it is OK: the user should
just stop running dbench or whatever it is which is gobbling all the memory
and the mount/open will then succeed.

This tunable refers to the amount of free memory which the VM will attempt to
sustain.  It is mainly needed for atomic allocations (eg, networking
receive).

It is currently hardwired to 1024k, which is far too large for small machines
and too small for large machines.

Rework it to be 128k on tiny machines and 16M on huge machines.

It turns out that the int_sqrt() function in oom_kill.c gets it wrong.

But fb_sqrt() in fbmon.c gets its math right.  Move that function into
lib/int_sqrt.c, and consolidate.

(oom_kill.c fix from Thomas Schlichter <schlicht@uni-mannheim.de>)