- 14 Jan, 2016 22 commits
-
-
Lee Jones authored
WARNING: Possible unnecessary 'out of memory' message + if (!pdata) { + dev_err(&client->dev, "Failed to allocate pdata\n"); WARNING: Possible unnecessary 'out of memory' message + if (!as3711) { + dev_err(&client->dev, "Memory allocation failed\n"); WARNING: line over 80 characters + dev_err(&client->dev, "regmap initialization failed: %d\n", ret); WARNING: line over 80 characters + /* We can reuse as3711_subdevs[], it will be copied in mfd_add_devices() */ WARNING: line over 80 characters + as3711_subdevs[AS3711_REGULATOR].platform_data = &pdata->regulator; WARNING: line over 80 characters + as3711_subdevs[AS3711_REGULATOR].pdata_size = sizeof(pdata->regulator); WARNING: line over 80 characters + as3711_subdevs[AS3711_BACKLIGHT].platform_data = &pdata->backlight; WARNING: line over 80 characters + as3711_subdevs[AS3711_BACKLIGHT].pdata_size = sizeof(pdata->backlight); total: 0 errors, 8 warnings, 236 lines checked Signed-off-by:Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
WARNING: Missing a blank line after declarations + struct arizona *arizona = dev_get_drvdata(&i2c->dev); + arizona_dev_exit(arizona); total: 0 errors, 1 warnings, 120 lines checked Cc: patches@opensource.wolfsonmicro.com Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Lee Jones authored
WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(5); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); total: 0 errors, 4 warnings, 1407 lines checked Cc: patches@opensource.wolfsonmicro.com Acked-by:
-
Lee Jones authored
WARNING: please, no space before tabs + * ^IMike Rapoport <mike@compulab.co.il>$ WARNING: please, no space before tabs + * ^IEric Miao <eric.miao@marvell.com>$ WARNING: please, no space before tabs +^I.id_table ^I= adp5520_id,$ total: 0 errors, 3 warnings, 365 lines checked Cc: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: -
Lee Jones authored
WARNING: char * array declaration might be better as static const + static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"}; WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO WARNING: quoted string split across lines + "Charger \"%s\" is connected with known battery." + " Rebooting.\n", WARNING: quoted string split across lines + "unable to set sysClkReq%dRfClkBuf: " + "%d\n", j + 1, ret); total: 0 errors, 4 warnings, 199 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: -
Lee Jones authored
WARNING: line over 80 characters +#define ADC_CH_IBAT_MIN (-6000) /* mA range measured by ADC for ib t*/ WARNING: line over 80 characters +#define ADC_CH_IBAT_MIN_V (-60) /* mV range measured by ADC for ibat*/ WARNING: suspect code indent for conditional statements (16, 20) + if (!strcmp(name, dev_name(gpadc->dev))) + return gpadc; WARNING: suspect code indent for conditional statements (0, 16) +if (ad_value < 0) { + dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", WARNING: quoted string split across lines + dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:" + " %d AD: 0x%x\n", channel, ad_value); WARNING: Missing a blank line after declarations + int raw_data; + raw_data = ab8500_gpadc_double_read_raw(gpadc, channel, WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(10); ERROR: else should follow close brace '}' + } + else WARNING: line over 80 characters + delay_max = 10000; /* large range to optimise sleep mode */ WARNING: line over 80 characters + gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain; WARNING: line over 80 characters + gpadc = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_gpadc), GFP_KERNEL); WARNING: Possible unnecessary 'out of memory' message + if (!gpadc) { + dev_err(&pdev->dev, "Error: No memory\n"); WARNING: space prohibited before semicolon + return ; WARNING: void function return statements are not generally useful + return ; +} WARNING: quoted string split across lines +MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson," + "M'boumba Cedric Madianga"); total: 1 errors, 14 warnings, 1089 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: -
Lee Jones authored
WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * not be accessed from here */ WARNING: Block comments use a trailing */ on a separate line + * the output is wanted in any case */ WARNING: Consecutive strings are generally better as a single string + " addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n", total: 0 errors, 4 warnings, 3331 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: -
Lee Jones authored
WARNING: Block comments use a trailing */ on a separate line + * */ WARNING: Block comments use a trailing */ on a separate line + * bank on higher 8 bits and reg in lower */ WARNING: Block comments use a trailing */ on a separate line + * bank on higher 8 bits and reg in lower */ WARNING: suspect code indent for conditional statements (8, 24) + if (unlikely(*offset == 17)) + *offset = 24; WARNING: suspect code indent for conditional statements (8, 24) + if (unlikely(*offset == 16)) + *offset = 25; WARNING: suspect code indent for conditional statements (8, 24) + if ((i == 3) && (*offset >= 24)) + *offset += 2; WARNING: ENOSYS means 'invalid syscall nr' and nothing else + return -ENOSYS; WARNING: static const char * array should probably be static const char * const + static const char *switch_off_status[] = { WARNING: static const char * array should probably be static const char * const + static const char *turn_on_status[] = { total: 0 errors, 9 warnings, 1867 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: -
Lee Jones authored
WARNING: Possible unnecessary 'out of memory' message + if (!otp) { + dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n"); total: 0 errors, 1 warnings, 250 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: -
Lee Jones authored
WARNING: Missing a blank line after declarations + struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); + if (!ab3100->startup_events_read) WARNING: Possible unnecessary 'out of memory' message + if (!ab3100) { + dev_err(&client->dev, "could not allocate AB3100 device\n"); WARNING: else is not generally useful after a break or return + break; + } else { total: 0 errors, 3 warnings, 996 lines checked Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: -
Lee Jones authored
WARNING: Possible unnecessary 'out of memory' message + if (!aat2870) { + dev_err(&client->dev, total: 0 errors, 1 warnings, 524 lines checked Signed-off-by: -
Lee Jones authored
Checkpatch output: WARNING: Block comments use a trailing */ on a separate line + * - turn off */ WARNING: Missing a blank line after declarations + int ret; + ret = i2c_add_driver(&pm860x_driver); total: 0 errors, 2 warnings, 1283 lines checked Signed-off-by: -
Charles Keepax authored
Specify the device tree binding for the input clocks to Arizona devices. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Geliang Tang authored
Signed-off-by:
Geliang Tang <geliangtang@163.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The mfd/s2mpa01.txt duplicates some of the information about bindings with old mfd/s2mps11.txt. Now common part exists entirely in mfd/samsung,sec-core.txt so: - add company prefix to file name (regulator/samsung,s2mpa01.txt), - remove duplicated information, - reorganize the contents to match style of regulator/samsung,s2mps11.txt. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by:
Mark Brown <broonie@kernel.org> Acked-by:
-
Krzysztof Kozlowski authored
The regulator/s5m8767-regulator.txt duplicates some of the information about bindings with old mfd/s2mps11.txt. Now common part exists entirely in mfd/samsung,sec-core.txt so: - add company prefix to file name (regulator/samsung,s5m8767.txt), - remove duplicated information, - reorganize the contents to match style of regulator/samsung,s2mps11.txt. Signed-off-by:
-
Krzysztof Kozlowski authored
Bindings for Samsung S2M and S5M family PMICs are in mess. They are spread over different files and subdirectories in a non-consistent way. The devices and respective drivers for them share a lot in common so everything could be organized in a more readable way. Reorganize the S2MPS11/13/14/15 Device Tree bindings to match the drivers for this family of devices: - move mfd/s2mps11.txt to mfd/samsung,sec-core.txt for the main MFD driver (common for entire family), - split clock block to clock/samsung,s2mps11.txt, - split regulator block to regulator/samsung,s2mps11.txt. Signed-off-by:
Michael Turquette <mturquette@baylibre.com> Acked-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Paul Parsons <lost.distance@yahoo.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by:
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. This also start to propagate the negative error code from the smbus call if there is one, as the last commit of this series will make the gpiolib core deal with that properly. Signed-off-by:
-
- 11 Jan, 2016 13 commits
-
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Charles Keepax authored
Update the device tree binding documentation to include the wlf,out-mono property that is used to specify whether each output is a mono or stereo output. Signed-off-by:
-
Charles Keepax authored
Add device tree bindings to support specifying outputs from the chip as mono outputs. Whilst we are doing it change the out_mono pdata from a bool to an int, because Sparse gets upset about using ARRAY_SIZE on bools. Signed-off-by:
-
Geert Uytterhoeven authored
Allow support for the DA9063 PMIC to be modular, cfr. DA9062, which allows to decrease size of multi-platform kernels (e.g. multi_v7_defconfig). Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by:
-
Charles Keepax authored
Currently the driver requests the boot done and control interface IRQs before it has requested its own IRQ line. This can cause problems on edge triggered IRQ systems as if an edge occurs before the parent IRQ is enabled it will be missed. Whilst we are changing the error handling remove an unused label as well. Signed-off-by:
-
Richard Fitzgerald authored
The CS47L24 and WM1831 codecs only have two GPIO lines, but are otherwise similar to the WM8280. Signed-off-by:
Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by:
-
Arnd Bergmann authored
The newly introduced as3722_i2c_suspend/resume functions are built unconditionally, but only used when power management is enabled, so we get a warning otherwise: drivers/mfd/as3722.c:427:12: warning: 'as3722_i2c_suspend' defined but not used [-Wunused-function] drivers/mfd/as3722.c:438:12: warning: 'as3722_i2c_resume' defined but not used [-Wunused-function] This marks them both as __maybe_unused, which avoids an ugly #ifdef and gives us best compile-time coverage. When they are unused, the compiler will silently drop the functions from its output. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 35deff7e ("mfd: as3722: Handle interrupts on suspend") Signed-off-by:
-
Thierry Reding authored
These new helpers simplify implementing multi-driver modules and properly handle failure to register one driver by unregistering all previously registered drivers. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Ivan T. Ivanov authored
Revision ID registers are available only on devices with Slave IDs that are even, so don't make access to unavailable registers. Signed-off-by:
Ivan T. Ivanov <ivan.ivanov@linaro.org> [sboyd@codeaurora.org: Consider all slave ids that are even] Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Rasmus Villemoes authored
wm831x_unique_id_show currently displays an interesting pattern of '0' and '3' characters which isn't very useful (figuring out why is left as an exercise for the reader). Presumably "buf[i]" should have been "id[i] & 0xff". But while there, it is much simpler to simply use %phN and do all the formatting at once. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
-
Damien Riegel authored
Currently syscon has a fixed configuration of 32 bits for register and values widths. In some cases, it would be desirable to be able to customize the value width. For example, certain boards (like the ones manufactured by Technologic Systems) have a FPGA that is memory-mapped, but its registers are only 16-bit wide. This patch adds an optional "reg-io-width" DT binding for syscon that allows to change the width for the data bus (i.e. val_bits). If this property is provided, it will also set the register stride to reg-io-width's value. If not provided, the default configuration is used. Signed-off-by:
Damien Riegel <damien.riegel@savoirfairelinux.com> Acked-by:
-
Charles Keepax authored
Signed-off-by:
-
Nicolas Boichat authored
cros_ec_cmd_xfer_spi and cros_ec_pkt_xfer_spi generally work like this: - Pull CS down (active), wait a bit, then send a command - Wait for response (multiple requests) - Wait a while, pull CS up (inactive) These operations, individually, lock the SPI bus, but there is nothing preventing the SPI framework from interleaving messages intended for other devices as the bus is unlocked in between. This is a problem as the EC expects CS to be held low for the whole duration. Solution: Lock the SPI bus during the whole transaction, to make sure that no other messages can be interleaved. Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Reviewed-by:
Gwendal Grignou <gwendal@chromium.org> Signed-off-by:
-
- 04 Dec, 2015 5 commits
-
-
Richard Fitzgerald authored
The CS47L24 source is part of the ex-Wolfson "Arizona" group of drivers. Not all cs47lxx devices are part of the Arizona driver group so the cs47l24 is explicitly listed by its full part number. Signed-off-by:
-
Richard Fitzgerald authored
This patch adds the regmap configuration tables and core MFD handling for the CS47L24 and WM1831 codecs. Note that compared to the other Arizona codecs, these devices do not have an LDO1 or micsupp regulators, extcon driver, or the DCVDD isolation control. Signed-off-by:
-
Richard Fitzgerald authored
This updates the Arizona MFD device tree bindings to add the Cirrus Logic CS47L24 and WM1831 codecs. Note that unlike all the other codecs the DCVDD-supply and MICVDD-supply are mandatory. Signed-off-by:
-
LABBE Corentin authored
of_match_device could return NULL, and so cause a NULL pointer dereference later. Signed-off-by:
LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by:
-
Linus Walleij authored
The platforms that use the AB8500 define all IRQ resources in the device tree and they are automatically populated by matching the .of_compatible string. These static resources are just surplus baggage these days. Signed-off-by:
-
