- 20 Feb, 2016 7 commits
-
-
Laurent Pinchart authored
The R8A7790 DU can source frames directly from the VSP1 devices VSPD0 and VSPD1. VSPD0 feeds DU0/1 plane 0, and VSPD1 feeds either DU2 plane 0 or DU0/1 plane 1. Allocate the correct fixed plane when sourcing frames from VSPD0 or VSPD1, and allocate planes in reverse index order otherwise to ensure maximum availability of planes 0 and 1. Signed-off-by:Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Laurent Pinchart authored
Rename plane setup functions using more explicit names, and use local variables to store intermediate values to increase readability. This also prepares for VSP compositor support. Signed-off-by: -
Laurent Pinchart authored
There's no need for a read-modify-write pattern, all register bits can be set explicitly. Signed-off-by: -
Laurent Pinchart authored
A disabled CRTC can't display planes, the driver shouldn't try to configure it when updating planes. The DRM core will store the plane state for us, and the plane will be configured appropriately the next time the CRTC is enabled. Signed-off-by: -
Laurent Pinchart authored
The atomic framework guarantees that the CRTC enable and disable functions will only be called when needed, there's no need to duplicate the CRTC state check. By replacing the local CRTC enabled state check at resume time with the CRTC active state we can remove the local CRTC enabled state altogether. Signed-off-by: -
Laurent Pinchart authored
The drm driver .load() operation is prone to race conditions as it initializes the driver after registering the device nodes. Its usage is deprecated, inline it in the probe function and call drm_dev_alloc() and drm_dev_register() explicitly. For consistency inline the .unload() handler in the remove function as well. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Laurent Pinchart authored
-
- 19 Feb, 2016 33 commits
-
-
Mauro Carvalho Chehab authored
drivers/media/platform/vsp1/vsp1_drm.c:47:5: warning: no previous prototype for 'vsp1_du_init' [-Wmissing-prototypes] int vsp1_du_init(struct device *dev) ^ drivers/media/platform/vsp1/vsp1_drm.c:76:5: warning: no previous prototype for 'vsp1_du_setup_lif' [-Wmissing-prototypes] int vsp1_du_setup_lif(struct device *dev, unsigned int width, ^ drivers/media/platform/vsp1/vsp1_drm.c:221:6: warning: no previous prototype for 'vsp1_du_atomic_begin' [-Wmissing-prototypes] void vsp1_du_atomic_begin(struct device *dev) ^ drivers/media/platform/vsp1/vsp1_drm.c:273:5: warning: no previous prototype for 'vsp1_du_atomic_update' [-Wmissing-prototypes] int vsp1_du_atomic_update(struct device *dev, unsigned int rpf_index, ^ drivers/media/platform/vsp1/vsp1_drm.c:451:6: warning: no previous prototype for 'vsp1_du_atomic_flush' [-Wmissing-prototypes] void vsp1_du_atomic_flush(struct device *dev) ^ Signed-off-by:Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
The IP version number carries enough information to identify the exact device instance features. Drop the related DT properties and use the IP version instead. Signed-off-by:
-
Takashi Saito authored
Display lists contain lists of registers and associated values to be applied atomically by the hardware. They lower the pressure on interrupt processing delays when reprogramming the device as settings can be prepared well in advance and queued to the hardware without waiting for the end of the current frame. Display list support is currently limited to the DRM pipeline. Signed-off-by:
Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Add DT compatible strings for the VSP2 instances found in the R-Car Gen3 SoCs and support them in the vsp1 driver. Signed-off-by:
-
Laurent Pinchart authored
Add two API functions named vsp1_du_atomic_begin() and vsp1_du_atomic_flush() to signal the start and end of an atomic update. The vsp1_du_setup_rpf() function is renamed to vsp1_du_atomic_update() for consistency. With this new API, the driver will reprogram all modified inputs atomically before restarting the video stream. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Implement internal control of the VSP pipeline to be used by the DU DRM/KMS driver when using the VSP as an internal composer handled through DRM/KMS only. Signed-off-by:
-
Laurent Pinchart authored
As the pipeline is configured internally by the driver when the userspace API is disabled its configuration can be trusted and link validation isn't needed. Signed-off-by:
-
Laurent Pinchart authored
The RPF and WPF alpha values are set through V4L2 controls and applied when starting the video stream by a call to v4l2_ctrl_handler_setup(). As that function uses the control handler mutex it can't be called in interrupt context, where the VSP+DU pipeline handler might need to reconfigure the pipeline. Set the alpha value manually in the RPF and WPF s_stream handler to ensure that the hardware is properly configured even when controlled without the userspace API. If the userspace API is enabled protect that with the control lock to avoid race conditions with userspace. Signed-off-by:
-
Laurent Pinchart authored
The pipeline inputs array stores pointers to all RPFs contained in the pipeline. It's currently indexed contiguously by adding RPFs in the order they are found during graph walk. This can't easily support dynamic addition and removal of RPFs while streaming, which will be required for combined VSP+DU support. Make the array indexed by RPF index instead and skip NULL elements when iterating over RPFs. Signed-off-by:
-
Laurent Pinchart authored
The R-Car Gen3 SoCs include VSP instances dedicated to the DU that will be controlled entirely by the rcar-du-drm driver through the KMS API. To support that use case make the userspace V4L2 API optional. Signed-off-by:
-
Laurent Pinchart authored
Format information and the related helper function are not specific to the V4L2 API, move them from vsp1_video.c to vsp1_pipe.c. Signed-off-by:
-
Laurent Pinchart authored
Not all VSP instances have a BRU on R-Car Gen3, make it optional. Set the feature unconditionally for now, this will be fixed when adding Gen3 support. Signed-off-by:
-
Laurent Pinchart authored
The R-Car Gen3 family has 5-inputs BRUs, support them by making the number of BRU inputs configurable. As the driver assumes that the number of BRU inputs is equal to the number of RPFs, replace the BRU_MAX_INPUTS macro with VSP1_MAX_RPF to make the assumption apparent. Signed-off-by:
-
Laurent Pinchart authored
The function will be used by the DU code, move it out of vsp1_video.c. Signed-off-by:
-
Laurent Pinchart authored
Several module read functions are not used, remove them. Signed-off-by:
-
Laurent Pinchart authored
Commit 58f896d8 ("[media] v4l: vsp1: sru: Make the intensity controllable during streaming") refactored the stream start code and removed the SRU CTRL0 register write by mistake. Add it back. Fixes: 58f896d8 ("[media] v4l: vsp1: sru: Make the intensity controllable during streaming") Signed-off-by:
-
Laurent Pinchart authored
Rename the VI6_DISP_IRQ_STA_DSE register bit to VI6_DISP_IRQ_STA_DST to fix a typo and match the datasheet. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Link creation will be handled differently for the DU pipeline. Signed-off-by:
-
Laurent Pinchart authored
No need to waste CPU cycles when the value we need is already available. Signed-off-by:
-
Laurent Pinchart authored
The code will be reused outside of vsp1_video.c. Signed-off-by:
-
Laurent Pinchart authored
Those functions are specific to video nodes, rename them for consistency. Signed-off-by:
-
Laurent Pinchart authored
The code will be used to control the vsp1 driver from the DU driver without using video nodes. Signed-off-by:
-
Laurent Pinchart authored
To make the pipeline structure and operations usable without video devices the frame end processing must be decoupled from struct vsp1_video. Implement this by calling the video frame end function indirectly through a function pointer in struct vsp1_pipeline. Signed-off-by:
-
Laurent Pinchart authored
The field is always equal to the num_inputs field plus one, remove the duplicate. Signed-off-by:
-
Laurent Pinchart authored
Only RPFs and WPFs can be associated with video nodes, don't waste memory by storing the video pointer in all entities. Signed-off-by:
-
Laurent Pinchart authored
Not all VSP1 instances include a UDS. Make the renesas,#uds DT property optional and accept a number of UDS equal to 0 as valid. Signed-off-by:
-
Laurent Pinchart authored
The rwpf queue operation doesn't queue a buffer but sets the memory address for the next run. Rename it to set_memory and pass it a new structure independent of the video buffer than only contains memory information. Signed-off-by:
-
Laurent Pinchart authored
To make the video device nodes optional we need to decouple the [rw]pf instances from the video devices. Move video devices out of struct vsp1_rwpf and instantiate them dynamically in the core driver code. Signed-off-by:
-
Laurent Pinchart authored
The structure represent a vsp1 videobuf2 buffer, name it accordingly. Signed-off-by:
-
Laurent Pinchart authored
This removes the dependency of vsp1_rpf and vsp1_wpf on vsp1_video, making it possible to reuse the operations without a V4L2 video device node. Signed-off-by:
-
Laurent Pinchart authored
Move the format from struct vsp1_video to struct vsp1_rwpf to prepare for VSPD KMS support that will not instantiate V4L2 video device nodes. Signed-off-by:
-
