- 04 Jul, 2017 5 commits
-
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David Windsor <dwindsor@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Reshetova, Elena authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
- 03 Jul, 2017 35 commits
-
-
Michal Kalderon authored
Fix compilation warning qed_iwarp.c:1721:5: warning: ll2_syn_handle may be used uninitialized in this function Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
-
Daniel Axtens authored
I was trying to wrap my head around meaning of mru, and realised that the second line of the comment defining it had somehow ended up after the line defining cutlen, leading to much confusion. Reorder the lines to make sense. Signed-off-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2017-07-03' of https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.13 Last minute changes to get new hardware and firmware support for iwlwifi and few other changes I was able to squeeze in. Also two patches for ieee80211.h and nl80211 as Johannes is away. Major changes: iwlwifi * some important fixes for 9000 HW * support for version 30 of the FW API for 8000 and 9000 series * a few new PCI IDs for 9000 series * reorganization of common files brcmfmac * support 4-way handshake offloading for WPA/WPA2-PSK and 802.1X ==================== Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Some overlapping changes in the mlx5 driver. A merge conflict resolution posted by Stephen Rothwell was used as a guide. Signed-off-by: -
Eric Dumazet authored
sk_ehashfn() is only used from a single file. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
We need to use refcount_set() on a newly created rule to avoid following error : [ 64.601749] ------------[ cut here ]------------ [ 64.601757] WARNING: CPU: 0 PID: 6476 at lib/refcount.c:184 refcount_sub_and_test+0x75/0xa0 [ 64.601758] Modules linked in: w1_therm wire cdc_acm ehci_pci ehci_hcd mlx4_en ib_uverbs mlx4_ib ib_core mlx4_core [ 64.601769] CPU: 0 PID: 6476 Comm: ip Tainted: G W 4.12.0-smp-DEV #274 [ 64.601771] task: ffff8837bf482040 task.stack: ffff8837bdc08000 [ 64.601773] RIP: 0010:refcount_sub_and_test+0x75/0xa0 [ 64.601774] RSP: 0018:ffff8837bdc0f5c0 EFLAGS: 00010286 [ 64.601776] RAX: 0000000000000026 RBX: 0000000000000001 RCX: 0000000000000000 [ 64.601777] RDX: 0000000000000026 RSI: 0000000000000096 RDI: ffffed06f7b81eae [ 64.601778] RBP: ffff8837bdc0f5d0 R08: 0000000000000004 R09: fffffbfff4a54c25 [ 64.601779] R10: 00000000cbc500e5 R11: ffffffffa52a6128 R12: ffff881febcf6f24 [ 64.601779] R13: ffff881fbf4eaf00 R14: ffff881febcf6f80 R15: ffff8837d7a4ed00 [ 64.601781] FS: 00007ff5a2f6b700(0000) GS:ffff881fff800000(0000) knlGS:0000000000000000 [ 64.601782] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 64.601783] CR2: 00007ffcdc70d000 CR3: 0000001f9c91e000 CR4: 00000000001406f0 [ 64.601783] Call Trace: [ 64.601786] refcount_dec_and_test+0x11/0x20 [ 64.601790] fib_nl_delrule+0xc39/0x1630 [ 64.601793] ? is_bpf_text_address+0xe/0x20 [ 64.601795] ? fib_nl_newrule+0x25e0/0x25e0 [ 64.601798] ? depot_save_stack+0x133/0x470 [ 64.601801] ? ns_capable+0x13/0x20 [ 64.601803] ? __netlink_ns_capable+0xcc/0x100 [ 64.601806] rtnetlink_rcv_msg+0x23a/0x6a0 [ 64.601808] ? rtnl_newlink+0x1630/0x1630 [ 64.601811] ? memset+0x31/0x40 [ 64.601813] netlink_rcv_skb+0x2d7/0x440 [ 64.601815] ? rtnl_newlink+0x1630/0x1630 [ 64.601816] ? netlink_ack+0xaf0/0xaf0 [ 64.601818] ? kasan_unpoison_shadow+0x35/0x50 [ 64.601820] ? __kmalloc_node_track_caller+0x4c/0x70 [ 64.601821] rtnetlink_rcv+0x28/0x30 [ 64.601823] netlink_unicast+0x422/0x610 [ 64.601824] ? netlink_attachskb+0x650/0x650 [ 64.601826] netlink_sendmsg+0x7b7/0xb60 [ 64.601828] ? netlink_unicast+0x610/0x610 [ 64.601830] ? netlink_unicast+0x610/0x610 [ 64.601832] sock_sendmsg+0xba/0xf0 [ 64.601834] ___sys_sendmsg+0x6a9/0x8c0 [ 64.601835] ? copy_msghdr_from_user+0x520/0x520 [ 64.601837] ? __alloc_pages_nodemask+0x160/0x520 [ 64.601839] ? memcg_write_event_control+0xd60/0xd60 [ 64.601841] ? __alloc_pages_slowpath+0x1d50/0x1d50 [ 64.601843] ? kasan_slab_free+0x71/0xc0 [ 64.601845] ? mem_cgroup_commit_charge+0xb2/0x11d0 [ 64.601847] ? lru_cache_add_active_or_unevictable+0x7d/0x1a0 [ 64.601849] ? __handle_mm_fault+0x1af8/0x2810 [ 64.601851] ? may_open_dev+0xc0/0xc0 [ 64.601852] ? __pmd_alloc+0x2c0/0x2c0 [ 64.601853] ? __fdget+0x13/0x20 [ 64.601855] __sys_sendmsg+0xc6/0x150 [ 64.601856] ? __sys_sendmsg+0xc6/0x150 [ 64.601857] ? SyS_shutdown+0x170/0x170 [ 64.601859] ? handle_mm_fault+0x28a/0x650 [ 64.601861] SyS_sendmsg+0x12/0x20 [ 64.601863] entry_SYSCALL_64_fastpath+0x13/0x94 Fixes: 717d1e99 ("net: convert fib_rule.refcnt from atomic_t to refcount_t") Signed-off-by:
-
Zhu Yanjun authored
The variable mlx4_log_num_mgm_entry_size is only called in main.c. CC: Joe Jin <joe.jin@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by:
Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Alban Browaeys authored
commit 9256645a ("net/core: relax BUILD_BUG_ON in netdev_stats_to_stats64") made an attempt to read beyond the size of the source a possibility. Fix to only copy src size to dest. As dest might be bigger than src. ================================================================== BUG: KASAN: slab-out-of-bounds in netdev_stats_to_stats64+0xe/0x30 at addr ffff8801be248b20 Read of size 192 by task VBoxNetAdpCtl/6734 CPU: 1 PID: 6734 Comm: VBoxNetAdpCtl Tainted: G O 4.11.4prahal+intel+ #118 Hardware name: LENOVO 20CDCTO1WW/20CDCTO1WW, BIOS GQET52WW (1.32 ) 05/04/2017 Call Trace: dump_stack+0x63/0x86 kasan_object_err+0x1c/0x70 kasan_report+0x270/0x520 ? netdev_stats_to_stats64+0xe/0x30 ? sched_clock_cpu+0x1b/0x190 ? __module_address+0x3e/0x3b0 ? unwind_next_frame+0x1ea/0xb00 check_memory_region+0x13c/0x1a0 memcpy+0x23/0x50 netdev_stats_to_stats64+0xe/0x30 dev_get_stats+0x1b9/0x230 rtnl_fill_stats+0x44/0xc00 ? nla_put+0xc6/0x130 rtnl_fill_ifinfo+0xe9e/0x3700 ? rtnl_fill_vfinfo+0xde0/0xde0 ? sched_clock+0x9/0x10 ? sched_clock+0x9/0x10 ? sched_clock_local+0x120/0x130 ? __module_address+0x3e/0x3b0 ? unwind_next_frame+0x1ea/0xb00 ? sched_clock+0x9/0x10 ? sched_clock+0x9/0x10 ? sched_clock_cpu+0x1b/0x190 ? VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp] ? depot_save_stack+0x1d8/0x4a0 ? depot_save_stack+0x34f/0x4a0 ? depot_save_stack+0x34f/0x4a0 ? save_stack+0xb1/0xd0 ? save_stack_trace+0x16/0x20 ? save_stack+0x46/0xd0 ? kasan_slab_alloc+0x12/0x20 ? __kmalloc_node_track_caller+0x10d/0x350 ? __kmalloc_reserve.isra.36+0x2c/0xc0 ? __alloc_skb+0xd0/0x560 ? rtmsg_ifinfo_build_skb+0x61/0x120 ? rtmsg_ifinfo.part.25+0x16/0xb0 ? rtmsg_ifinfo+0x47/0x70 ? register_netdev+0x15/0x30 ? vboxNetAdpOsCreate+0xc0/0x1c0 [vboxnetadp] ? vboxNetAdpCreate+0x210/0x400 [vboxnetadp] ? VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp] ? do_vfs_ioctl+0x17f/0xff0 ? SyS_ioctl+0x74/0x80 ? do_syscall_64+0x182/0x390 ? __alloc_skb+0xd0/0x560 ? __alloc_skb+0xd0/0x560 ? save_stack_trace+0x16/0x20 ? init_object+0x64/0xa0 ? ___slab_alloc+0x1ae/0x5c0 ? ___slab_alloc+0x1ae/0x5c0 ? __alloc_skb+0xd0/0x560 ? sched_clock+0x9/0x10 ? kasan_unpoison_shadow+0x35/0x50 ? kasan_kmalloc+0xad/0xe0 ? __kmalloc_node_track_caller+0x246/0x350 ? __alloc_skb+0xd0/0x560 ? kasan_unpoison_shadow+0x35/0x50 ? memset+0x31/0x40 ? __alloc_skb+0x31f/0x560 ? napi_consume_skb+0x320/0x320 ? br_get_link_af_size_filtered+0xb7/0x120 [bridge] ? if_nlmsg_size+0x440/0x630 rtmsg_ifinfo_build_skb+0x83/0x120 rtmsg_ifinfo.part.25+0x16/0xb0 rtmsg_ifinfo+0x47/0x70 register_netdevice+0xa2b/0xe50 ? __kmalloc+0x171/0x2d0 ? netdev_change_features+0x80/0x80 register_netdev+0x15/0x30 vboxNetAdpOsCreate+0xc0/0x1c0 [vboxnetadp] vboxNetAdpCreate+0x210/0x400 [vboxnetadp] ? vboxNetAdpComposeMACAddress+0x1d0/0x1d0 [vboxnetadp] ? kasan_check_write+0x14/0x20 VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp] ? VBoxNetAdpLinuxOpen+0x20/0x20 [vboxnetadp] ? lock_acquire+0x11c/0x270 ? __audit_syscall_entry+0x2fb/0x660 do_vfs_ioctl+0x17f/0xff0 ? __audit_syscall_entry+0x2fb/0x660 ? ioctl_preallocate+0x1d0/0x1d0 ? __audit_syscall_entry+0x2fb/0x660 ? kmem_cache_free+0xb2/0x250 ? syscall_trace_enter+0x537/0xd00 ? exit_to_usermode_loop+0x100/0x100 SyS_ioctl+0x74/0x80 ? do_sys_open+0x350/0x350 ? do_vfs_ioctl+0xff0/0xff0 do_syscall_64+0x182/0x390 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7f7e39a1ae07 RSP: 002b:00007ffc6f04c6d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffc6f04c730 RCX: 00007f7e39a1ae07 RDX: 00007ffc6f04c730 RSI: 00000000c0207601 RDI: 0000000000000007 RBP: 00007ffc6f04c700 R08: 00007ffc6f04c780 R09: 0000000000000008 R10: 0000000000000541 R11: 0000000000000206 R12: 0000000000000007 R13: 00000000c0207601 R14: 00007ffc6f04c730 R15: 0000000000000012 Object at ffff8801be248008, in cache kmalloc-4096 size: 4096 Allocated: PID = 6734 save_stack_trace+0x16/0x20 save_stack+0x46/0xd0 kasan_kmalloc+0xad/0xe0 __kmalloc+0x171/0x2d0 alloc_netdev_mqs+0x8a7/0xbe0 vboxNetAdpOsCreate+0x65/0x1c0 [vboxnetadp] vboxNetAdpCreate+0x210/0x400 [vboxnetadp] VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp] do_vfs_ioctl+0x17f/0xff0 SyS_ioctl+0x74/0x80 do_syscall_64+0x182/0x390 return_from_SYSCALL_64+0x0/0x6a Freed: PID = 5600 save_stack_trace+0x16/0x20 save_stack+0x46/0xd0 kasan_slab_free+0x73/0xc0 kfree+0xe4/0x220 kvfree+0x25/0x30 single_release+0x74/0xb0 __fput+0x265/0x6b0 ____fput+0x9/0x10 task_work_run+0xd5/0x150 exit_to_usermode_loop+0xe2/0x100 do_syscall_64+0x26c/0x390 return_from_SYSCALL_64+0x0/0x6a Memory state around the buggy address: ffff8801be248a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8801be248b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8801be248b80: 00 00 00 00 00 00 00 00 00 00 00 07 fc fc fc fc ^ ffff8801be248c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801be248c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Signed-off-by:
Alban Browaeys <alban.browaeys@gmail.com> Signed-off-by:
-
Christos Gkekas authored
Pointer hdr in netxen_setup_minidump() is set but never used, thus should be removed. Signed-off-by:
Christos Gkekas <chris.gekas@gmail.com> Signed-off-by:
-
David S. Miller authored
Jiri Benc says: ==================== vxlan, geneve: fix hlist corruption Fix memory corruption introduced with the support of both IPv4 and IPv6 sockets in a single device. The same bug is present in VXLAN and Geneve. ==================== Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Jiri Benc authored
It's not a good idea to add the same hlist_node to two different hash lists. This leads to various hard to debug memory corruptions. Fixes: 8ed66f0e ("geneve: implement support for IPv6-based tunnels") Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Jiri Benc authored
It's not a good idea to add the same hlist_node to two different hash lists. This leads to various hard to debug memory corruptions. Fixes: b1be00a6 ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device") Signed-off-by:
-
Or Gerlitz authored
If mlx5 is set to be built-in and mlxfw as a module, we get a link error: drivers/built-in.o: In function `mlx5_firmware_flash': (.text+0x5aed72): undefined reference to `mlxfw_firmware_flash' Since we don't want to mandate selecting mlxfw for mlx5 users, we use the IS_REACHABLE macro to make sure that a stub is exposed to the caller. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reported-by:
Jakub Kicinski <kubakici@wp.pl> Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David S. Miller authored
Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
David S. Miller authored
Reported-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== Misc BPF helper/verifier improvements Miscellanous improvements I still had in my queue, it adds a new bpf_skb_adjust_room() helper for cls_bpf, exports to fdinfo whether tail call array owner is JITed, so iproute2 error reporting can be improved on that regard, a small cleanup and extension to trace printk, two verifier patches, one to make the code around narrower ctx access a bit more straight forward and one to allow for imm += x operations, that we've seen LLVM generating and the verifier currently rejecting. We've included the patch 6 given it's rather small and we ran into it from LLVM side, it would be great if it could be queued for stable as well after the merge window. Last but not least, test cases are added also related to imm alu improvement. Thanks a lot! ==================== Signed-off-by: -
Daniel Borkmann authored
Add couple of verifier test cases for x|imm += pkt_ptr, including the imm += x extension. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
John Fastabend authored
Currently the verifier does not track imm across alu operations when the source register is of unknown type. This adds additional pattern matching to catch this and track imm. We've seen LLVM generating this pattern while working on cilium. Signed-off-by:
-
John Fastabend authored
Currently, bpf_trace_printk does not support common formatting symbol '%i' however vsprintf does and is what eventually gets called by bpf helper. If users are used to '%i' and currently make use of it, then bpf_trace_printk will just return with error without dumping anything to the trace pipe, so just add support for '%i' to the helper. Signed-off-by:
-
Daniel Borkmann authored
We do export through fdinfo already whether a prog is JITed or not, given a program load can fail in case of either prog or tail call map has JITed property, but neither both are JITed or not JITed, we can facilitate error reporting in loaders like iproute2 through exporting owner_jited of tail call map. We already do export owner_prog_type through this facility, so parser can pick up both for comparison. Signed-off-by:
-
Daniel Borkmann authored
This work tries to make the semantics and code around the narrower ctx access a bit easier to follow. Right now everything is done inside the .is_valid_access(). Offset matching is done differently for read/write types, meaning writes don't support narrower access and thus matching only on offsetof(struct foo, bar) is enough whereas for read case that supports narrower access we must check for offsetof(struct foo, bar) + offsetof(struct foo, bar) + sizeof(<bar>) - 1 for each of the cases. For read cases of individual members that don't support narrower access (like packet pointers or skb->cb[] case which has its own narrow access logic), we check as usual only offsetof(struct foo, bar) like in write case. Then, for the case where narrower access is allowed, we also need to set the aux info for the access. Meaning, ctx_field_size and converted_op_size have to be set. First is the original field size e.g. sizeof(<bar>) as in above example from the user facing ctx, and latter one is the target size after actual rewrite happened, thus for the kernel facing ctx. Also here we need the range match and we need to keep track changing convert_ctx_access() and converted_op_size from is_valid_access() as both are not at the same location. We can simplify the code a bit: check_ctx_access() becomes simpler in that we only store ctx_field_size as a meta data and later in convert_ctx_accesses() we fetch the target_size right from the location where we do convert. Should the verifier be misconfigured we do reject for BPF_WRITE cases or target_size that are not provided. For the subsystems, we always work on ranges in is_valid_access() and add small helpers for ranges and narrow access, convert_ctx_accesses() sets target_size for the relevant instruction. Signed-off-by:
-
Daniel Borkmann authored
This work adds a helper that can be used to adjust net room of an skb. The helper is generic and can be further extended in future. Main use case is for having a programmatic way to add/remove room to v4/v6 header options along with cls_bpf on egress and ingress hook of the data path. It reuses most of the infrastructure that we added for the bpf_skb_change_type() helper which can be used in nat64 translations. Similarly, the helper only takes care of adjusting the room so that related data is populated and csum adapted out of the BPF program using it. Signed-off-by:
-
Daniel Borkmann authored
Add a small skb_mac_header_len() helper similarly as the skb_network_header_len() we have and replace open coded places in BPF's bpf_skb_change_proto() helper. Will also be used in upcoming work. Signed-off-by:
-
Tore Anderson authored
The HP lt4132 LTE/HSPA+ 4G Module (03f0:a31d) is a rebranded Huawei ME906s-158 device. It, like the ME906s-158, requires the "NDP to end" quirk for correct operation. Signed-off-by:
Tore Anderson <tore@fud.no> Signed-off-by:
-
Matteo Croce authored
In the IPVLAN documentation there is an example command line where the master and slave interface names are inverted. Fix the command line and also add the optional `name' keyword to better describe what the command is doing. v2: added commit message Signed-off-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
-
Sabrina Dubroca authored
Commit a985343b ("vxlan: refactor verification and application of configuration") modified vxlan device creation, and replaced the assignment of vxlan->net to src_net with dev_net(netdev) in ->setup(). But dev_net(netdev) is not the same as src_net. At the time ->setup() is called, dev_net hasn't been set yet, so we end up creating the socket for the vxlan device in init_net. Fix this by bringing back the assignment of vxlan->net during device creation. Fixes: a985343b ("vxlan: refactor verification and application of configuration") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by:
-
David S. Miller authored
Lin Yun Sheng says: ==================== Add loopback support in phy_driver and hns ethtool fix This Patch Set add set_loopback in phy_driver and use it to setup loopback when doing ethtool phy self_test. Patch V8: Respin the Patch based on net-next Patch V7: 1. Add comment why resume the phy in hns_nic_config_phy_loopback. 2. Fix a typo error in patch description. Patch V6: Fix Or'ing error code in __lb_setup. Patch V5: Removing non loopback related code change. Patch V4: 1. Remove c45 checking 2. Add -ENOTSUPP when function pointer is null, take mutex in phy_loopback. Patch V3: Calling phy_loopback enable and disable in pair in hns mac driver. Patch V2: 1. Add phy_loopback in phy_device.c. 2. Do error checking and do the read and write once in genphy_loopback. 3. Remove gen10g_loopback in phy_device.c. Patch V1: Initial Submit ==================== Signed-off-by: -
Lin Yun Sheng authored
Use function set_loopback in phy_driver to setup phy loopback when doing ethtool self test. Signed-off-by:
Lin Yun Sheng <linyunsheng@huawei.com> Signed-off-by:
-
Lin Yun Sheng authored
This patch add set_loopback in phy_driver, which is used by MAC driver to enable or disable phy loopback. it also add a generic genphy_loopback function, which use BMCR loopback bit to enable or disable loopback. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Sabrina Dubroca authored
Currently, when the link for $DEV is down, this command succeeds but the address is removed immediately by DAD (1): ip addr add 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800 In the same situation, this will succeed and not remove the address (2): ip addr add 1111::12/64 dev $DEV ip addr change 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800 The comment in addrconf_dad_begin() when !IF_READY makes it look like this is the intended behavior, but doesn't explain why: * If the device is not ready: * - keep it tentative if it is a permanent address. * - otherwise, kill it. We clearly cannot prevent userspace from doing (2), but we can make (1) work consistently with (2). addrconf_dad_stop() is only called in two cases: if DAD failed, or to skip DAD when the link is down. In that second case, the fix is to avoid deleting the address, like we already do for permanent addresses. Fixes: 3c21edbd ("[IPV6]: Defer IPv6 device initialization until the link becomes ready.") Signed-off-by: -
Jim Baxter authored
The CDC-NCM driver can require large amounts of memory to create skb's and this can be a problem when the memory becomes fragmented. This especially affects embedded systems that have constrained resources but wish to maximise the throughput of CDC-NCM with 16KiB NTB's. The issue is after running for a while the kernel memory can become fragmented and it needs compacting. If the NTB allocation is needed before the memory has been compacted the atomic allocation can fail which can cause increased latency, large re-transmissions or disconnections depending upon the data being transmitted at the time. This situation occurs for less than a second until the kernel has compacted the memory but the failed devices can take a lot longer to recover from the failed TX packets. To ease this temporary situation I modified the CDC-NCM TX path to temporarily switch into a reduced memory mode which allocates an NTB that will fit into a USB_CDC_NCM_NTB_MIN_OUT_SIZE (default 2048 Bytes) sized memory block and only transmit NTB's with a single network frame until the memory situation is resolved. Each time this issue occurs we wait for an increasing number of reduced size allocations before requesting a full size one to not put additional pressure on a low memory system. Once the memory is compacted the CDC-NCM data can resume transmitting at the normal tx_max rate once again. Signed-off-by:
Jim Baxter <jim_baxter@mentor.com> Reviewed-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
David S. Miller authored
Michal Kalderon says: ==================== qed: Add iWARP support for QL4xxxx This patch series adds iWARP support to our QL4xxxx networking adapters. The code changes span across qed and qedr drivers, but this series contains changes to qed only. Once the series is accepted, the qedr series will be submitted to the rdma tree. There is one additional qed patch which enables the iWARP, this patch is delayed until the qedr series will be accepted. The patches were previously sent as an RFC, and these are the first 12 patches in the RFC series: https://www.spinics.net/lists/linux-rdma/msg51416.html This series was tested and built against net-next. MAINTAINERS file is not updated in this PATCH as there is a pending patch for qedr driver update https://patchwork.kernel.org/patch/9752761. ==================== Signed-off-by:
-
Kalderon, Michal authored
iWARP has different physical queue requirements than RoCE Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
Kalderon, Michal authored
When computing how much memory is required for the different hw clients iWARP protocol should be taken into account Signed-off-by:
-
