- 14 Jul, 2018 3 commits
-
-
Yuchung Cheng authored
Previously, when a data segment was sent an ACK was piggybacked on the data segment without generating a CA_EVENT_NON_DELAYED_ACK event to notify congestion control modules. So the DCTCP ca->delayed_ack_reserved flag could incorrectly stay set when in fact there were no delayed ACKs being reserved. This could result in sending a special ECN notification ACK that carries an older ACK sequence, when in fact there was no need for such an ACK. DCTCP keeps track of the delayed ACK status with its own separate state ca->delayed_ack_reserved. Previously it may accidentally cancel the delayed ACK without updating this field upon sending a special ACK that carries a older ACK sequence. This inconsistency would lead to DCTCP receiver never acknowledging the latest data until the sender times out and retry in some cases. Packetdrill script (provided by Larry Brakmo) 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < [ect0] SEW 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> 0.100 > SE. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8> 0.110 < [ect0] . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 0.200 < [ect0] . 1:1001(1000) ack 1 win 257 0.200 > [ect01] . 1:1(0) ack 1001 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 1:2(1) ack 1001 0.200 < [ect0] . 1001:2001(1000) ack 2 win 257 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 2:3(1) ack 2001 0.200 < [ect0] . 2001:3001(1000) ack 3 win 257 0.200 < [ect0] . 3001:4001(1000) ack 3 win 257 0.200 > [ect01] . 3:3(0) ack 4001 0.210 < [ce] P. 4001:4501(500) ack 3 win 257 +0.001 read(4, ..., 4500) = 4500 +0 write(4, ..., 1) = 1 +0 > [ect01] PE. 3:4(1) ack 4501 +0.010 < [ect0] W. 4501:5501(1000) ack 4 win 257 // Previously the ACK sequence below would be 4501, causing a long RTO +0.040~+0.045 > [ect01] . 4:4(0) ack 5501 // delayed ack +0.311 < [ect0] . 5501:6501(1000) ack 4 win 257 // More data +0 > [ect01] . 4:4(0) ack 6501 // now acks everything +0.500 < F. 9501:9501(0) ack 4 win 257 Reported-by:
Larry Brakmo <brakmo@fb.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We accidentally left out the error handling for kstrtoul(). Fixes: a520030e ("qlcnic: Implement flash sysfs callback for 83xx adapter") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Michael Heimpold authored
Signed-off-by:
Michael Heimpold <mhei@heimpold.de> Signed-off-by:
-
- 13 Jul, 2018 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-07-13 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix AF_XDP TX error reporting before final kernel release such that it becomes consistent between copy mode and zero-copy, from Magnus. 2) Fix three different syzkaller reported issues: oob due to ld_abs rewrite with too large offset, another oob in l3 based skb test run and a bug leaving mangled prog in subprog JITing error path, from Daniel. 3) Fix BTF handling for bitfield extraction on big endian, from Okash. 4) Fix a missing linux/errno.h include in cgroup/BPF found by kbuild bot, from Roman. 5) Fix xdp2skb_meta.sh sample by using just command names instead of absolute paths for tc and ip and allow them to be redefined, from Taeung. 6) Fix availability probing for BPF seg6 helpers before final kernel ships so they can be detected at prog load time, from Mathieu. ==================== Signed-off-by: -
Stefano Brivio authored
Commit 8b700862 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") introduced a different handling for the pfmemalloc flag in copy and clone paths. In __skb_clone(), now, the flag is set only if it was set in the original skb, but not cleared if it wasn't. This is wrong and might lead to socket buffers being flagged with pfmemalloc even if the skb data wasn't allocated from pfmemalloc reserves. Copy the flag instead of ORing it. Reported-by:
Sabrina Dubroca <sd@queasysnail.net> Fixes: 8b700862 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Tested-by:
-
Daniel Borkmann authored
Magnus Karlsson says: ==================== This patch set adjusts the AF_XDP TX error reporting so that it becomes consistent between copy mode and zero-copy. First some background: Copy-mode for TX uses the SKB path in which the action of sending the packet is performed from process context using the sendmsg syscall. Completions are usually done asynchronously from NAPI mode by using a TX interrupt. In this mode, send errors can be returned back through the syscall. In zero-copy mode both the sending of the packet and the completions are done asynchronously from NAPI mode for performance reasons. In this mode, the sendmsg syscall only makes sure that the TX NAPI loop will be run that performs both the actions of sending and completing. In this mode it is therefore not possible to return errors through the sendmsg syscall as the sending is done from the NAPI loop. Note that it is possible to implement a synchronous send with our API, but in our benchmarks that made the TX performance drop by nearly half due to synchronization requirements and cache line bouncing. But for some netdevs this might be preferable so let us leave it up to the implementation to decide. The problem is that the current code base returns some errors in copy-mode that are not possible to return in zero-copy mode. This patch set aligns them so that the two modes always return the same error code. We achieve this by removing some of the errors returned by sendmsg in copy-mode (and in one case adding an error message for zero-copy mode) and offering alternative error detection methods that are consistent between the two modes. The structure of the patch set is as follows: Patch 1: removes the ENXIO return code from copy-mode when someone has forcefully changed the number of queues on the device so that the queue bound to the socket is no longer available. Just silently stop sending anything as in zero-copy mode. Patch 2: stop returning EAGAIN in copy mode when the completion queue is full as zero-copy does not do this. Instead this situation can be detected by comparing the head and tail pointers of the completion queue in both modes. In any case, EAGAIN was not the correct error code here since no amount of calling sendmsg will solve the problem. Only consuming one or more messages on the completion queue will fix this. Patch 3: Always return ENOBUFS from sendmsg if there is no TX queue configured. This was not the case for zero-copy mode. Patch 4: stop returning EMSGSIZE when the size of the packet is larger than the MTU. Just send it to the device so that it will drop it as in zero-copy mode. Note that copy-mode can still return EAGAIN in certain circumstances, but as these conditions cannot occur in zero-copy mode it is fine for copy-mode to return them. ==================== Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
Magnus Karlsson authored
This patch stops returning EMSGSIZE from sendmsg in copy mode when the size of the packet is larger than the MTU. Just send it to the device so that it will drop it as in zero-copy mode. This makes the error reporting consistent between copy mode and zero-copy mode. Fixes: 35fcde7f ("xsk: support for Tx") Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
-
Magnus Karlsson authored
This patch makes sure ENOBUFS is always returned from sendmsg if there is no TX queue configured. This was not the case for zero-copy mode. With this patch this error reporting is consistent between copy mode and zero-copy mode. Fixes: ac98d8aa ("xsk: wire upp Tx zero-copy functions") Signed-off-by:
-
Magnus Karlsson authored
This patch stops returning EAGAIN in TX copy mode when the completion queue is full as zero-copy does not do this. Instead this situation can be detected by comparing the head and tail pointers of the completion queue in both modes. In any case, EAGAIN was not the correct error code here since no amount of calling sendmsg will solve the problem. Only consuming one or more messages on the completion queue will fix this. With this patch, the error reporting becomes consistent between copy mode and zero-copy mode. Fixes: 35fcde7f ("xsk: support for Tx") Signed-off-by:
-
Magnus Karlsson authored
This patch removes the ENXIO return code from TX copy-mode when someone has forcefully changed the number of queues on the device so that the queue bound to the socket is no longer available. Just silently stop sending anything as in zero-copy mode so the error reporting gets consistent between the two modes. Fixes: 35fcde7f ("xsk: support for Tx") Signed-off-by:
-
- 12 Jul, 2018 21 commits
-
-
Willem de Bruijn authored
The udpgso benchmark compares various configurations of UDP and TCP. Including one that is not upstream, udp zerocopy. This is a leftover from the earlier RFC patchset. The test is part of kselftests and run in continuous spinners. Remove the failing case to make the test start passing. Fixes: 3a687bef ("selftests: udp gso benchmark") Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Willem de Bruijn authored
If variable length link layer headers result in a packet shorter than dev->hard_header_len, reset the network header offset. Else skb->mac_len may exceed skb->len after skb_mac_reset_len. packet_sendmsg_spkt already has similar logic. Fixes: b84bbaf7 ("packet: in packet_snd start writing at link layer allocation") Signed-off-by:
-
Willem de Bruijn authored
When pulling the NSH header in nsh_gso_segment, set the mac length based on the encapsulated packet type. skb_reset_mac_len computes an offset to the network header, which here still points to the outer packet: > skb_reset_network_header(skb); > [...] > __skb_pull(skb, nsh_len); > skb_reset_mac_header(skb); // now mac hdr starts nsh_len == 8B after net hdr > skb_reset_mac_len(skb); // mac len = net hdr - mac hdr == (u16) -8 == 65528 > [..] > skb_mac_gso_segment(skb, ..) Link: http://lkml.kernel.org/r/CAF=yD-KeAcTSOn4AxirAxL8m7QAS8GBBe1w09eziYwvPbbUeYA@mail.gmail.com Reported-by: syzbot+7b9ed9872dab8c32305d@syzkaller.appspotmail.com Fixes: c411ed85 ("nsh: add GSO support") Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Stefano Brivio authored
The pfmemalloc flag indicates that the skb was allocated from the PFMEMALLOC reserves, and the flag is currently copied on skb copy and clone. However, an skb copied from an skb flagged with pfmemalloc wasn't necessarily allocated from PFMEMALLOC reserves, and on the other hand an skb allocated that way might be copied from an skb that wasn't. So we should not copy the flag on skb copy, and rather decide whether to allow an skb to be associated with sockets unrelated to page reclaim depending only on how it was allocated. Move the pfmemalloc flag before headers_start[0] using an existing 1-bit hole, so that __copy_skb_header() doesn't copy it. When cloning, we'll now take care of this flag explicitly, contravening to the warning comment of __skb_clone(). While at it, restore the newline usage introduced by commit b1937227 ("net: reorganize sk_buff for faster __copy_skb_header()") to visually separate bytes used in bitfields after headers_start[0], that was gone after commit a9e419dc ("netfilter: merge ctinfo into nfct pointer storage area"), and describe the pfmemalloc flag in the kernel-doc structure comment. This doesn't change the size of sk_buff or cacheline boundaries, but consolidates the 15 bits hole before tc_index into a 2 bytes hole before csum, that could now be filled more easily. Reported-by:
Patrick Talbert <ptalbert@redhat.com> Fixes: c93bdd0e ("netvm: allow skb allocation to use PFMEMALLOC reserves") Signed-off-by:
-
David S. Miller authored
Bert Kenward says: ==================== sfc: filter locking fixes Two fixes for sfc ef10 filter table locking. Initially spotted by lockdep, but one issue has also been seen in normal use. ==================== Signed-off-by: -
Bert Kenward authored
We should take and release the filter_sem consistently during the reset process, in the same manner as the mac_lock and reset_lock. For lockdep consistency we also take the filter_sem for write around other calls to efx->type->init(). Fixes: c2bebe37 ("sfc: give ef10 its own rwsem in the filter table instead of filter_lock") Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
-
Bert Kenward authored
In some situations we may end up calling down_read while already holding the semaphore for write, thus hanging. This has been seen when setting the MAC address for the interface. The hung task log in this situation includes this stack: down_read efx_ef10_filter_insert efx_ef10_filter_insert_addr_list efx_ef10_filter_vlan_sync_rx_mode efx_ef10_filter_add_vlan efx_ef10_filter_table_probe efx_ef10_set_mac_address efx_set_mac_address dev_set_mac_address In addition, lockdep rightly points out that nested calling of down_read is incorrect. Fixes: c2bebe37 ("sfc: give ef10 its own rwsem in the filter table instead of filter_lock") Tested-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Florian Fainelli authored
SYSTEMPORT Lite reversed the logic compared to SYSTEMPORT, the GIB_FCS_STRIP bit is set when the Ethernet FCS is stripped, and that bit is not set by default. Fix the logic such that we properly check whether that bit is set or not and we don't forward an extra 4 bytes to the network stack. Fixes: 44a4524c ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Stefan Baranoff authored
Under rare conditions where repair code may be used it is possible that window probes are either unnecessary or undesired. If the user knows that window probes are not wanted or needed this change allows them to skip sending them when a socket comes out of repair. Signed-off-by:
Stefan Baranoff <sbaranoff@gmail.com> Signed-off-by:
-
Stefan Baranoff authored
This patch fixes a bug where the sequence numbers of a socket created using TCP repair functionality are lower than set after connect is called. This occurs when the repair socket overlaps with a TIME-WAIT socket and triggers the re-use code. The amount lower is equal to the number of times that a particular IP/port set is re-used and then put back into TIME-WAIT. Re-using the first time the sequence number is 1 lower, closing that socket and then re-opening (with repair) a new socket with the same addresses/ports puts the sequence number 2 lower than set via setsockopt. The third time is 3 lower, etc. I have not tested what the limit of this acrewal is, if any. The fix is, if a socket is in repair mode, to respect the already set sequence number and timestamp when it would have already re-used the TIME-WAIT socket. Signed-off-by:
-
Daniel Borkmann authored
syzkaller managed to trigger the following bug through fault injection: [...] [ 141.043668] verifier bug. No program starts at insn 3 [ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613 get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline] [ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613 fixup_call_args kernel/bpf/verifier.c:5587 [inline] [ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613 bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952 [ 141.047355] CPU: 3 PID: 4072 Comm: a.out Not tainted 4.18.0-rc4+ #51 [ 141.048446] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS 1.10.2-1 04/01/2014 [ 141.049877] Call Trace: [ 141.050324] __dump_stack lib/dump_stack.c:77 [inline] [ 141.050324] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 [ 141.050950] ? dump_stack_print_info.cold.2+0x52/0x52 lib/dump_stack.c:60 [ 141.051837] panic+0x238/0x4e7 kernel/panic.c:184 [ 141.052386] ? add_taint.cold.5+0x16/0x16 kernel/panic.c:385 [ 141.053101] ? __warn.cold.8+0x148/0x1ba kernel/panic.c:537 [ 141.053814] ? __warn.cold.8+0x117/0x1ba kernel/panic.c:530 [ 141.054506] ? get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline] [ 141.054506] ? fixup_call_args kernel/bpf/verifier.c:5587 [inline] [ 141.054506] ? bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952 [ 141.055163] __warn.cold.8+0x163/0x1ba kernel/panic.c:538 [ 141.055820] ? get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline] [ 141.055820] ? fixup_call_args kernel/bpf/verifier.c:5587 [inline] [ 141.055820] ? bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952 [...] What happens in jit_subprogs() is that kcalloc() for the subprog func buffer is failing with NULL where we then bail out. Latter is a plain return -ENOMEM, and this is definitely not okay since earlier in the loop we are walking all subprogs and temporarily rewrite insn->off to remember the subprog id as well as insn->imm to temporarily point the call to __bpf_call_base + 1 for the initial JIT pass. Thus, bailing out in such state and handing this over to the interpreter is troublesome since later/subsequent e.g. find_subprog() lookups are based on wrong insn->imm. Therefore, once we hit this point, we need to jump to out_free path where we undo all changes from earlier loop, so that interpreter can work on unmodified insn->{off,imm}. Another point is that should find_subprog() fail in jit_subprogs() due to a verifier bug, then we also should not simply defer the program to the interpreter since also here we did partial modifications. Instead we should just bail out entirely and return an error to the user who is trying to load the program. Fixes: 1c2a088a ("bpf: x64: add JIT support for multi-function programs") Reported-by: syzbot+7d427828b2ea6e592804@syzkaller.appspotmail.com Signed-off-by: -
Jacob Keller authored
When fq_codel_init fails, qdisc_create_dflt will cleanup by using qdisc_destroy. This function calls the ->reset() op prior to calling the ->destroy() op. Unfortunately, during the failure flow for sch_fq_codel, the ->flows parameter is not initialized, so the fq_codel_reset function will null pointer dereference. kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 kernel: IP: fq_codel_reset+0x58/0xd0 [sch_fq_codel] kernel: PGD 0 P4D 0 kernel: Oops: 0000 [#1] SMP PTI kernel: Modules linked in: i40iw i40e(OE) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc devlink ebtable_filter ebtables ip6table_filter ip6_tables rpcrdma ib_isert iscsi_target_mod sunrpc ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate iTCO_wdt iTCO_vendor_support intel_uncore ib_core intel_rapl_perf mei_me mei joydev i2c_i801 lpc_ich ioatdma shpchp wmi sch_fq_codel xfs libcrc32c mgag200 ixgbe drm_kms_helper isci ttm firewire_ohci kernel: mdio drm igb libsas crc32c_intel firewire_core ptp pps_core scsi_transport_sas crc_itu_t dca i2c_algo_bit ipmi_si ipmi_devintf ipmi_msghandler [last unloaded: i40e] kernel: CPU: 10 PID: 4219 Comm: ip Tainted: G OE 4.16.13custom-fq-codel-test+ #3 kernel: Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.05.0004.051120151007 05/11/2015 kernel: RIP: 0010:fq_codel_reset+0x58/0xd0 [sch_fq_codel] kernel: RSP: 0018:ffffbfbf4c1fb620 EFLAGS: 00010246 kernel: RAX: 0000000000000400 RBX: 0000000000000000 RCX: 00000000000005b9 kernel: RDX: 0000000000000000 RSI: ffff9d03264a60c0 RDI: ffff9cfd17b31c00 kernel: RBP: 0000000000000001 R08: 00000000000260c0 R09: ffffffffb679c3e9 kernel: R10: fffff1dab06a0e80 R11: ffff9cfd163af800 R12: ffff9cfd17b31c00 kernel: R13: 0000000000000001 R14: ffff9cfd153de600 R15: 0000000000000001 kernel: FS: 00007fdec2f92800(0000) GS:ffff9d0326480000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000008 CR3: 0000000c1956a006 CR4: 00000000000606e0 kernel: Call Trace: kernel: qdisc_destroy+0x56/0x140 kernel: qdisc_create_dflt+0x8b/0xb0 kernel: mq_init+0xc1/0xf0 kernel: qdisc_create_dflt+0x5a/0xb0 kernel: dev_activate+0x205/0x230 kernel: __dev_open+0xf5/0x160 kernel: __dev_change_flags+0x1a3/0x210 kernel: dev_change_flags+0x21/0x60 kernel: do_setlink+0x660/0xdf0 kernel: ? down_trylock+0x25/0x30 kernel: ? xfs_buf_trylock+0x1a/0xd0 [xfs] kernel: ? rtnl_newlink+0x816/0x990 kernel: ? _xfs_buf_find+0x327/0x580 [xfs] kernel: ? _cond_resched+0x15/0x30 kernel: ? kmem_cache_alloc+0x20/0x1b0 kernel: ? rtnetlink_rcv_msg+0x200/0x2f0 kernel: ? rtnl_calcit.isra.30+0x100/0x100 kernel: ? netlink_rcv_skb+0x4c/0x120 kernel: ? netlink_unicast+0x19e/0x260 kernel: ? netlink_sendmsg+0x1ff/0x3c0 kernel: ? sock_sendmsg+0x36/0x40 kernel: ? ___sys_sendmsg+0x295/0x2f0 kernel: ? ebitmap_cmp+0x6d/0x90 kernel: ? dev_get_by_name_rcu+0x73/0x90 kernel: ? skb_dequeue+0x52/0x60 kernel: ? __inode_wait_for_writeback+0x7f/0xf0 kernel: ? bit_waitqueue+0x30/0x30 kernel: ? fsnotify_grab_connector+0x3c/0x60 kernel: ? __sys_sendmsg+0x51/0x90 kernel: ? do_syscall_64+0x74/0x180 kernel: ? entry_SYSCALL_64_after_hwframe+0x3d/0xa2 kernel: Code: 00 00 48 89 87 00 02 00 00 8b 87 a0 01 00 00 85 c0 0f 84 84 00 00 00 31 ed 48 63 dd 83 c5 01 48 c1 e3 06 49 03 9c 24 90 01 00 00 <48> 8b 73 08 48 8b 3b e8 6c 9a 4f f6 48 8d 43 10 48 c7 03 00 00 kernel: RIP: fq_codel_reset+0x58/0xd0 [sch_fq_codel] RSP: ffffbfbf4c1fb620 kernel: CR2: 0000000000000008 kernel: ---[ end trace e81a62bede66274e ]--- This is caused because flows_cnt is non-zero, but flows hasn't been initialized. fq_codel_init has left the private data in a partially initialized state. To fix this, reset flows_cnt to 0 when we fail to initialize. Additionally, to make the state more consistent, also cleanup the flows pointer when the allocation of backlogs fails. This fixes the NULL pointer dereference, since both the for-loop and memset in fq_codel_reset will be no-ops when flow_cnt is zero. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-07-12 This series contains updates to ixgbe and e100/e1000 kernel documentation. Alex fixes ixgbe to ensure that we are more explicit about the ordering of updates to the receive address register (RAR) table. Dan Carpenter fixes an issue where we were reading one element beyond the end of the array. Mauro Carvalho Chehab fixes formatting issues in the e100.rst and e1000.rst that were causing errors during 'make htmldocs'. ==================== Signed-off-by: -
Mauro Carvalho Chehab authored
Documentation/networking/e1000.rst:83: ERROR: Unexpected indentation. Documentation/networking/e1000.rst:84: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/networking/e1000.rst:173: WARNING: Definition list ends without a blank line; unexpected unindent. Documentation/networking/e1000.rst:236: WARNING: Definition list ends without a blank line; unexpected unindent. While here, fix highlights and mark a table as such. Signed-off-by:Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mauro Carvalho Chehab authored
Documentation/networking/e100.rst:57: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:68: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:75: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:84: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:93: WARNING: Inline emphasis start-string without end-string. While here, fix some highlights. Signed-off-by: -
Dan Carpenter authored
The ipsec->tx_tbl[] has IXGBE_IPSEC_MAX_SA_COUNT elements so the > needs to be changed to >= so we don't read one element beyond the end of the array. Fixes: 59259470 ("ixgbe: process the Tx ipsec offload") Signed-off-by:
Shannon Nelson <shannon.nelson@oracle.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
Alexander Duyck authored
This change makes it so that we are much more explicit about the ordering of updates to the receive address register (RAR) table. Prior to this patch I believe we may have been updating the table while entries were still active, or possibly allowing for reordering of things since we weren't explicitly flushing writes to either the lower or upper portion of the register prior to accessing the other half. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by:
-
David S. Miller authored
Merge branch 'ieee802154-for-davem-2018-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2018-07-11 An update from ieee802154 for your *net* tree. Build system fix for a missing include from Arnd Bergmann. Setting the IFLA_LINK for the lowpan parent from Lubomir Rintel. Fixes for some RX corner cases in adf7242 driver by Michael Hennerich. And some small patches to cleanup our BUG_ON vs WARN_ON usage. ==================== Signed-off-by:
-
Ewan D. Milne authored
Trivial fix to spelling mistake in qed_probe message. Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Russell King authored
It was been observed that with a particular order of initialisation, the netdev can be up, but the SFP module still has its TX_DISABLE signal asserted. This occurs when the network device brought up before the SFP kernel module has been inserted by userspace. This occurs because sfp-bus layer does not hear about the change in network device state, and so assumes that it is still down. Set netdev->sfp when the upstream is registered to work around this problem. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King authored
We fail to correctly clean up after a bus registration failure, which can lead to an incorrect assumption about the registration state of the upstream or sfp cage. Signed-off-by:
-
- 11 Jul, 2018 3 commits
-
-
Daniel Borkmann authored
sykzaller triggered several panics similar to the below: [...] [ 248.851531] BUG: KASAN: use-after-free in _copy_to_user+0x5c/0x90 [ 248.857656] Read of size 985 at addr ffff8808017ffff2 by task a.out/1425 [...] [ 248.865902] CPU: 1 PID: 1425 Comm: a.out Not tainted 4.18.0-rc4+ #13 [ 248.865903] Hardware name: Supermicro SYS-5039MS-H12TRF/X11SSE-F, BIOS 2.1a 03/08/2018 [ 248.865905] Call Trace: [ 248.865910] dump_stack+0xd6/0x185 [ 248.865911] ? show_regs_print_info+0xb/0xb [ 248.865913] ? printk+0x9c/0xc3 [ 248.865915] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 248.865919] print_address_description+0x6f/0x270 [ 248.865920] kasan_report+0x25b/0x380 [ 248.865922] ? _copy_to_user+0x5c/0x90 [ 248.865924] check_memory_region+0x137/0x190 [ 248.865925] kasan_check_read+0x11/0x20 [ 248.865927] _copy_to_user+0x5c/0x90 [ 248.865930] bpf_test_finish.isra.8+0x4f/0xc0 [ 248.865932] bpf_prog_test_run_skb+0x6a0/0xba0 [...] After scrubbing the BPF prog a bit from the noise, turns out it called bpf_skb_change_head() for the lwt_xmit prog with headroom of 2. Nothing wrong in that, however, this was run with repeat >> 0 in bpf_prog_test_run_skb() and the same skb thus keeps changing until the pskb_expand_head() called from skb_cow() keeps bailing out in atomic alloc context with -ENOMEM. So upon return we'll basically have 0 headroom left yet blindly do the __skb_push() of 14 bytes and keep copying data from there in bpf_test_finish() out of bounds. Fix to check if we have enough headroom and if pskb_expand_head() fails, bail out with error. Another bug independent of this fix (but related in triggering above) is that BPF_PROG_TEST_RUN should be reworked to reset the skb/xdp buffer to it's original state from input as otherwise repeating the same test in a loop won't work for benchmarking when underlying input buffer is getting changed by the prog each time and reused for the next run leading to unexpected results. Fixes: 1cf1cae9 ("bpf: introduce BPF_PROG_TEST_RUN command") Reported-by: syzbot+709412e651e55ed96498@syzkaller.appspotmail.com Reported-by: syzbot+54f39d6ab58f39720a55@syzkaller.appspotmail.com Signed-off-by:
-
Okash Khawaja authored
When extracting bitfield from a number, btf_int_bits_seq_show() builds a mask and accesses least significant byte of the number in a way specific to little-endian. This patch fixes that by checking endianness of the machine and then shifting left and right the unneeded bits. Thanks to Martin Lau for the help in navigating potential pitfalls when dealing with endianess and for the final solution. Fixes: b00b8dae ("bpf: btf: Add pretty print capability for data with BTF type info") Signed-off-by:
Okash Khawaja <osk@fb.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Mathieu Xhonneux authored
bpf_lwt_seg6_* helpers require CONFIG_IPV6_SEG6_BPF, and currently return -EOPNOTSUPP to indicate unavailability. This patch forces the BPF verifier to reject programs using these helpers when !CONFIG_IPV6_SEG6_BPF, allowing users to more easily probe if they are available or not. Signed-off-by:
Mathieu Xhonneux <m.xhonneux@gmail.com> Signed-off-by:
-
- 10 Jul, 2018 2 commits
-
-
Daniel Borkmann authored
Mark reported that syzkaller triggered a KASAN detected slab-out-of-bounds bug in ___bpf_prog_run() with a BPF_LD | BPF_ABS word load at offset 0x8001. After further investigation it became clear that the issue was the BPF_LDX_MEM() which takes offset as an argument whereas it cannot encode larger than S16_MAX offsets into it. For this synthetical case we need to move the full address into tmp register instead and do the LDX without immediate value. Fixes: e0cea7ce ("bpf: implement ld_abs/ld_ind in native bpf") Reported-by:
syzbot <syzkaller@googlegroups.com> Reported-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Taeung Song authored
The below path error can occur: # ./xdp2skb_meta.sh --dev eth0 --list ./xdp2skb_meta.sh: line 61: /usr/sbin/tc: No such file or directory So just use command names instead of absolute paths of tc and ip. In addition, it allow callers to redefine $TC and $IP paths Fixes: 36e04a2d ("samples/bpf: xdp2skb_meta shows transferring info from XDP to SKB") Reviewed-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Taeung Song <treeze.taeung@gmail.com> Acked-by:
-
- 09 Jul, 2018 4 commits
-
-
Taehee Yoo authored
rhashtable_free_and_destroy() cancels re-hash deferred work then walks and destroys elements. at this moment, some elements can be still in future_tbl. that elements are not destroyed. test case: nft_rhash_destroy() calls rhashtable_free_and_destroy() to destroy all elements of sets before destroying sets and chains. But rhashtable_free_and_destroy() doesn't destroy elements of future_tbl. so that splat occurred. test script: %cat test.nft table ip aa { map map1 { type ipv4_addr : verdict; elements = { 0 : jump a0, 1 : jump a0, 2 : jump a0, 3 : jump a0, 4 : jump a0, 5 : jump a0, 6 : jump a0, 7 : jump a0, 8 : jump a0, 9 : jump a0, } } chain a0 { } } flush ruleset table ip aa { map map1 { type ipv4_addr : verdict; elements = { 0 : jump a0, 1 : jump a0, 2 : jump a0, 3 : jump a0, 4 : jump a0, 5 : jump a0, 6 : jump a0, 7 : jump a0, 8 : jump a0, 9 : jump a0, } } chain a0 { } } flush ruleset %while :; do nft -f test.nft; done Splat looks like: [ 200.795603] kernel BUG at net/netfilter/nf_tables_api.c:1363! [ 200.806944] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 200.812253] CPU: 1 PID: 1582 Comm: nft Not tainted 4.17.0+ #24 [ 200.820297] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [ 200.830309] RIP: 0010:nf_tables_chain_destroy.isra.34+0x62/0x240 [nf_tables] [ 200.838317] Code: 43 50 85 c0 74 26 48 8b 45 00 48 8b 4d 08 ba 54 05 00 00 48 c7 c6 60 6d 29 c0 48 c7 c7 c0 65 29 c0 4c 8b 40 08 e8 58 e5 fd f8 <0f> 0b 48 89 da 48 b8 00 00 00 00 00 fc ff [ 200.860366] RSP: 0000:ffff880118dbf4d0 EFLAGS: 00010282 [ 200.866354] RAX: 0000000000000061 RBX: ffff88010cdeaf08 RCX: 0000000000000000 [ 200.874355] RDX: 0000000000000061 RSI: 0000000000000008 RDI: ffffed00231b7e90 [ 200.882361] RBP: ffff880118dbf4e8 R08: ffffed002373bcfb R09: ffffed002373bcfa [ 200.890354] R10: 0000000000000000 R11: ffffed002373bcfb R12: dead000000000200 [ 200.898356] R13: dead000000000100 R14: ffffffffbb62af38 R15: dffffc0000000000 [ 200.906354] FS: 00007fefc31fd700(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000 [ 200.915533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.922355] CR2: 0000557f1c8e9128 CR3: 0000000106880000 CR4: 00000000001006e0 [ 200.930353] Call Trace: [ 200.932351] ? nf_tables_commit+0x26f6/0x2c60 [nf_tables] [ 200.939525] ? nf_tables_setelem_notify.constprop.49+0x1a0/0x1a0 [nf_tables] [ 200.947525] ? nf_tables_delchain+0x6e0/0x6e0 [nf_tables] [ 200.952383] ? nft_add_set_elem+0x1700/0x1700 [nf_tables] [ 200.959532] ? nla_parse+0xab/0x230 [ 200.963529] ? nfnetlink_rcv_batch+0xd06/0x10d0 [nfnetlink] [ 200.968384] ? nfnetlink_net_init+0x130/0x130 [nfnetlink] [ 200.975525] ? debug_show_all_locks+0x290/0x290 [ 200.980363] ? debug_show_all_locks+0x290/0x290 [ 200.986356] ? sched_clock_cpu+0x132/0x170 [ 200.990352] ? find_held_lock+0x39/0x1b0 [ 200.994355] ? sched_clock_local+0x10d/0x130 [ 200.999531] ? memset+0x1f/0x40 V2: - free all tables requested by Herbert Xu Signed-off-by:Taehee Yoo <ap420073@gmail.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes. These are bug fixes in error code paths, TC Flower VLAN TCI flow checking bug fix, proper filtering of Broadcast packets if IFF_BROADCAST is not set, and a bug fix in bnxt_get_max_rings() to return 0 ring parameters when the return value is -ENOMEM. ==================== Signed-off-by: -
Vikas Gupta authored
Fix bug in the error code path when bnxt_request_irq() returns failure. bnxt_disable_napi() should not be called in this error path because NAPI has not been enabled yet. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
Calling bnxt_set_max_func_irqs() to modify the max IRQ count requested or freed by the RDMA driver is flawed. The max IRQ count is checked when re-initializing the IRQ vectors and this can happen multiple times during ifup or ethtool -L. If the max IRQ is reduced and the RDMA driver is operational, we may not initailize IRQs correctly. This problem shows up on VFs with very small number of MSIX. There is no other logic that relies on the IRQ count excluding the ones used by RDMA. So we fix it by just removing the call to subtract or add the IRQs used by RDMA. Fixes: a588e458 ("bnxt_en: Add interface to support RDMA driver.") Signed-off-by:
-
