An error occurred fetching the project authors.
- 29 Dec, 2008 4 commits
-
-
Manu Abraham authored
Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Manu Abraham authored
Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Manu Abraham authored
Use an enumeration for I/Q Swap rather than an int, easier to spot the nasty ones Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Manu Abraham authored
Add initial support for: * KNC1 DVB-S2 Plus * KNC1 DVB-S2 OEM (known as Satelco DVB-S2) Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 12 Oct, 2008 2 commits
-
-
Janne Grunau authored
adapter_nr mod option does not make sense for budget-core since it is only common code shared by all budget drivers Signed-off-by:
Janne Grunau <janne-dvb@grunau.be> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Bjorn Helgaas authored
Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format used by lspci(8). Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 20 Jul, 2008 1 commit
-
-
Antti Palosaari authored
- separate TDA10021 and TDA10023 attach - configurable Xtal settings - configurable input freq offset + baseband conversion type settings Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
- 24 Apr, 2008 3 commits
-
-
Oliver Endriss authored
Fixed some typos. Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Christoph Pfister authored
Quoting the commit introducing reinitialise_demod (3984 / by adq): "These cards [KNC1 DVBT and DVBC] need special handling for CI - reinitialising the frontend device when the CI module is reset." Apparently my 1894:0010 also needs that fix, because once you initialise CI/CAM you lose lock. Signed-off-by:
Christoph Pfister <pfister@linuxtv.org> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Christoph Pfister authored
The current ci implementation doesn't accept 0xff when reading data bytes (address == 0), thus breaks cams which report a buffer size of 0x--ff like my orion one. Remove the 0xff check altogether, because validation is really the job of a higher layer. Signed-off-by:
Christoph Pfister <pfister@linuxtv.org> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
- 18 Feb, 2008 2 commits
-
-
Kim Sandberg authored
Add support for Satelco EasyWatch PCI DVB-T, sub-id 0x1894:0x003a. Signed-off-by:
Kim Sandberg <ksan@saunalahti.fi> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Oliver Endriss authored
Add support for KNC TV Station Plus X4, sub-system id 0x1894:0x0015. Based on a patch submitted by Johannes Deisenhofer. Thanks-to: Johannes Deisenhofer <jo.deisenhofer@googlemail.com> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 Oct, 2007 1 commit
-
-
Andi Drebes authored
This patch replaces an array size calculation done using sizeof with an invocation of the ARRAY_SIZE macro. Tested by compilation on an i386 box using "allyesconfig". Diffed against Linus' git-tree. Signed-off-by:
Andi Drebes <lists-receive@programmierforen.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
- 18 Jul, 2007 4 commits
-
-
Michael Krufky authored
This patch removes all static dependencies on the dvb-pll module. All exported dvb_pll_desc's have been UNexported, and the caller will reference the individual dvb_pll_desc by it's index in the pll_list array. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Acked-by:
Oliver Endriss <o.endriss@gmx.de> Acked-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Oliver Endriss authored
Add support for Satelco EasyWatch PCI DVB-S card (subsystem 0x1894:0x001b). Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
removed philips_sd1878_tda8261_tuner_set_params, using dvb_pll_attach, instead. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Rename dvb_pll_desc.setbw() to set(), and accept struct dvb_frontend_parameters instead of passing both freq and bandwidth, so that this may be used as a generic function. In order to do this, dvb_pll_configure must also be altered in the same manner, to take struct dvb_frontend_parameters instead of freq and bandwidth. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
- 27 Apr, 2007 3 commits
-
-
Hartmut Birr authored
Make the inversion setting configurable. The KNC ONE V1.0 uses non inverted setting for the inversion and add the KNC ONE V1.0 card. Signed-off-by:
Hartmut Birr <e9hack@googlemail.com> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hartmut Birr authored
Add support for the frontend TDA10023 and add cards that need the tda10023. Signed-off-by:
Hartmut Birr <e9hack@googlemail.com> Signed-off-by:
Georg Acher <acher@in.tum.de> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hartmut Birr authored
Remove the polarity switching of the clock for the DVB-C cards in budget-av.c. This hack is no longer necessary because the saa7146 can do the job to remove the additional FEC bytes from the TS. Signed-off-by:
Hartmut Birr <e9hack@googlemail.com> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
- 21 Feb, 2007 1 commit
-
-
Marco Schluessler authored
Call saa7146_vv_release on exit. Signed-off-by:
Marco Schluessler <marco@lordzodiac.de> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 Dec, 2006 6 commits
-
-
Hartmut Birr authored
Remove bogus read during MC1 programming. A '1' bit could never be cleared using the old code. Use MASK_xx macros. Signed-off-by:
Hartmut Birr <e9hack@gmail.com> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hartmut Birr authored
Added a delay to give the frontend a little bit time for power-on. Signed-off-by:
Hartmut Birr <e9hack@googlemail.com> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Oliver Endriss authored
Use interrupt mode for I2C transfers. Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
- adhere to 80-column limit - replace some spaces with tabs Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew de Quincey authored
For some reason, some of these cards have the tda10021 configured to a different address. This adds support for such cards Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Thomas Hamm authored
Add support for Satelco EasyWatch PCI DVBC cards Signed-off-by:
Thomas Hamm <thhamm@t-online.de> Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
- 26 Sep, 2006 5 commits
-
-
Andrew de Quincey authored
Port budget-av to use the new tua6100 driver Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Christoph Pfister authored
Apparently there are two types of knc1 dvb-s plus cards with different tuners (as for the knc1 dvb-s ones). This patch adds support for those cards with subsystem id 1894:0011. Successfully tested by: Benjamin Weber <benny1990@gmail.com> Signed-off-by:
Christoph Pfister <christophpfister@gmail.com> Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew de Quincey authored
This actually needs the same configuration as the other DVBC cards; simply no one had managed to test before to find out. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew de Quincey authored
Remove buggy dvb_detach() macro and replace with unified dvb_frontend_detach() call. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew de Quincey authored
Only devices using > 1 frontend were ported; ones which did not are left using static binding. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by:
Michael Krufky <mkrufky@linuxtv.org> Acked-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
- 29 Jul, 2006 1 commit
-
-
Oliver Endriss authored
Fix bug reported by Andrew de Quincey: After cold boot the saa7146 DMA did not start if the demuxer was opened before the frontend has locked to the signal. DMA transfers will be started now if (and only if) the frontend is locked and data should be sent to the demuxer. Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
- 30 Jun, 2006 2 commits
-
-
Andrew de Quincey authored
The original driver had a restriction that if a card as an saa7113 chip, then it cannot have a CI interface. This is not the case. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew de Quincey authored
These cards do not need the tda10021 configuration change when data is streamed through a CAM module. This disables it for these ones. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
- 25 Jun, 2006 5 commits
-
-
Lothar Englisch authored
This patch adds support for Satelco EasyWatch DVB-S light card, a clone of the KNC 1, with PCI subsystem ID 1894:001e Signed-off-by:
Lothar Englisch <Lothar.Englisch@lycos.de> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Patrick Boettcher authored
V4L/DVB (4028): Change dvb_frontend_ops to be a real field instead of a pointer field inside dvb_frontend The dvb_frontend_ops is a pointer inside dvb_frontend. That's why every demod-driver is having a field of dvb_frontend_ops in its private-state-struct and using the reference for filling the pointer-field in dvb_frontend. - It saves at least two lines of code per demod-driver, - reduces object size (one less dereference per frontend_ops-access), - be coherent with dvb_tuner_ops, - makes it a little bit easier for newbies to understand how it works and - avoids stupid mistakes because you would have to copy the dvb_frontend_ops always, before you could assign the static pointer directly, which was dangerous. Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew de Quincey authored
These cards need special handling for CI - reinitialising the frontend device when the CI module is reset. Additionally the tda10021 needs to be set into a different transport stream mode when a CI module is present. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew de Quincey authored
Don't try and set the tuner ops if the demod was not detected. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Andrew de Quincey authored
Rename pll calls to appropriate tuner calls. Remove pll functions from demod structures. Hook tuner call into tuner_ops. Add pll gate control calls where appropriate. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-