- 16 Jul, 2010 5 commits
-
-
Peter Huewe authored
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Huewe authored
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Huewe authored
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wan ZongShun authored
This patch fixed a bug that Mac driver does not work,because I missed the clk enable. I have ever tested the driver when I submitted previous Mac driver patch, and it worked good, since my bootloader has enabled the clock in advance. But when I try to use other bootloader where clock engine was disabled,the Mac driver does not work, so I send this patch to fix this issue. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Remove near duplication of format string constants by using the newly introduced vsprintf extention %pV to reduce text by 20k or so. $ size drivers/net/mlx4/built-in.o* text data bss dec hex filename 161367 1866 48784 212017 33c31 drivers/net/mlx4/built-in.o 142621 1866 46248 190735 2e90f drivers/net/mlx4/built-in.o.new Use printk_once as appropriate. Convert printks to pr_<level>, some bare printks now use pr_cont. Remove now unused #define PFX. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 15 Jul, 2010 6 commits
-
-
Chihau Chau authored
This patch fix a code style issue, if a function is exported, the EXPORT_SYMBOL macro for it should follow immediately after the closing function brace line. Signed-off-by: Chihau Chau <chihau@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas de Pesloüan authored
The test for buffer overflow ensures we have room for 6 more bytes. sprintf, called with %s:%d, slave->dev->name, slave->queue_id may yield far more than 6 bytes. The correct test is res > (PAGE_SIZE - IFNAMSIZ - 6) . Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kulikov Vasiliy authored
Free allocated netdev if no probe is expected. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The reset_policy() does: memset(d->tcfd_defdata, 0, SIMP_MAX_DATA); strlcpy(d->tcfd_defdata, defdata, SIMP_MAX_DATA); In the original code, the size of d->tcfd_defdata wasn't fixed and if strlen(defdata) was less than 31, reset_policy() would cause memory corruption. Please Note: The original alloc_defdata() assumes defdata is 32 characters and a NUL terminator while reset_policy() assumes defdata is 31 characters and a NUL. This patch updates alloc_defdata() to match reset_policy() (ie a shorter string). I'm not very familiar with this code so please review carefully. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rajesh Borundia authored
When the crash kernel is loaded after crash, the device is in unknown state. So reset the device contexts prior to its creation in case of kdump, depending upon kernel parameter reset_devices. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kulikov Vasiliy authored
Unmap mapped IO in wd_probe1() if register_netdev() failed. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 14 Jul, 2010 12 commits
-
-
Kulikov Vasiliy authored
Use %p instead of %08x in printk(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anirban Chakraborty authored
o NPAR configuration which is programmed in fw, need to restore after fw recovery. o Update version to 5.0.7 Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sucheta Chakraborty authored
Pci error recovery support added. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
netdev notifier are not unregistered if pci_register_driver fails. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Disable tx timeout recovery, if auto_fw_reset is disable Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rajesh Borundia authored
Turning off rx pause param and autoneg param is not supported so return error in that case. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Egger authored
ETRAX_NETWORK_RED_ON_NO_CONNECTION doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Egger authored
SH_HICOSH4 doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Egger authored
CASSINI_NAPI doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Egger authored
CASSINI_MULTICAST_REG_WRITE doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Egger authored
CASSINI_QGE_DEBUG doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Egger authored
{AR,WAVE}LAN doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Jul, 2010 17 commits
-
-
David S. Miller authored
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
-
David S. Miller authored
This reverts commit b31fb868. pcim_*() managed drivers do not need explicit resource releasing like this. Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/wl12xx/wl1271_cmd.h
-
David J. Choi authored
Body of the explanation: -support 16bit and 32bit bus width. -add device reset for ks8842/8841 Micrel device. -set 100Mbps as a default for Micrel device. -set MAC address in both MAC/Switch layer with different sequence for Micrel device, as mentioned in data sheet. -use private data to set options both 16/32bit bus width and Micrel device/ Timberdale(FPGA). -update Kconfig in order to put more information about ks8842 device. Signed-off-by: David J. Choi <david.choi@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Filip Aben authored
This patch removes the driver version from the driver. This version hasn't changed since the driver's inclusion in the kernel and is a source of confusion for some customers. Signed-off-by: Filip Aben <f.aben@option.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
chas williams - CONTRACTOR authored
Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Baruch Siach authored
With the move to phylib (commit e6b043d5) I was seeing sporadic "MDIO write timeout" messages. Measure of the actual time spent showed latency times of more than 1600us. This patch uses the MII event indication of the FEC hardware to detect completion of MDIO transactions. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Avoid two extra instructions in sock_free(), to reload skb->truesize and skb->sk Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Changli Gao authored
a new boolean flag no_autobind is added to structure proto to avoid the autobind calls when the protocol is TCP. Then sock_rps_record_flow() is called int the TCP's sendmsg() and sendpage() pathes. Signed-off-by: Changli Gao <xiaosuo@gmail.com> ---- include/net/inet_common.h | 4 ++++ include/net/sock.h | 1 + include/net/tcp.h | 8 ++++---- net/ipv4/af_inet.c | 15 +++++++++------ net/ipv4/tcp.c | 11 +++++------ net/ipv4/tcp_ipv4.c | 3 +++ net/ipv6/af_inet6.c | 8 ++++---- net/ipv6/tcp_ipv6.c | 3 +++ 8 files changed, 33 insertions(+), 20 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
-
Changli Gao authored
remove useless blanks. Signed-off-by: Changli Gao <xiaosuo@gmail.com> ---- include/net/inet_common.h | 55 ++++------- include/net/tcp.h | 222 +++++++++++++++++----------------------------- include/net/udp.h | 38 +++---- 3 files changed, 123 insertions(+), 192 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
-