The source operand of 'mov rm,sreg' is segment register, not
general-purpose register, so remove SrcReg from decoding.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

'and AL,imm8' should be mask as ByteOp, otherwise the dest operand
length will no correct and we may fill the full EAX when writeback.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Fix the comment of out instruction, using the same style as the
other instructions.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Memory reads for 'mov sreg,rm16' should be 16 bits only.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

__set_spte() will happily replace an spte with the accessed bit set with
one that has the accessed bit clear.  Add a helper update_spte() which checks
for this condition and updates the page flag if needed.
Signed-off-by: Avi Kivity <avi@redhat.com>

Currently, in the window between the check for the accessed bit, and actually
dropping the spte, a vcpu can access the page through the spte and set the bit,
which will be ignored by the mmu.

Fix by using an exchange operation to atmoically fetch the spte and drop it.
Signed-off-by: Avi Kivity <avi@redhat.com>

Since we need to make the check atomic, move it to the place that will
set the new spte.
Signed-off-by: Avi Kivity <avi@redhat.com>

When we call rmap_remove(), we (almost) always immediately follow it by
an __set_spte() to a nonpresent pte.  Since we need to perform the two
operations atomically, to avoid losing the dirty and accessed bits, introduce
a helper drop_spte() and convert all call sites.

The operation is still nonatomic at this point.
Signed-off-by: Avi Kivity <avi@redhat.com>

Commit 341d9b535b6c simplify reload logic while entry guest mode, it
can avoid unnecessary sync-root if KVM_REQ_MMU_RELOAD and
KVM_REQ_MMU_SYNC both set.

But, it cause a issue that when we handle 'KVM_REQ_TLB_FLUSH', the
root is invalid, it is triggered during my test:

Kernel BUG at ffffffffa00212b8 [verbose debug info unavailable]
......

Fixed by directly return if the root is not ready.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

For 32bit machines where the physical address width is
larger than the virtual address width the frame number types
in KVM may overflow. Fix this by changing them to u64.

[sfr: fix build on 32-bit ppc]
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

This patch converts unnecessary divide and modulo operations
in the KVM large page related code into logical operations.
This allows to convert gfn_t to u64 while not breaking 32
bit builds.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

This patch fixes the following warning.

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
include/linux/kvm_host.h:259 invoked rcu_dereference_check() without
protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
no locks held by qemu-system-x86/29679.

stack backtrace:
Pid: 29679, comm: qemu-system-x86 Not tainted 2.6.35-rc3+ #200
Call Trace:
 [<ffffffff810a224e>] lockdep_rcu_dereference+0xa8/0xb1
 [<ffffffffa018a06f>] kvm_iommu_unmap_memslots+0xc9/0xde [kvm]
 [<ffffffffa018a0c4>] kvm_iommu_unmap_guest+0x40/0x4e [kvm]
 [<ffffffffa018f772>] kvm_arch_destroy_vm+0x1a/0x186 [kvm]
 [<ffffffffa01800d0>] kvm_put_kvm+0x110/0x167 [kvm]
 [<ffffffffa0180ecc>] kvm_vcpu_release+0x18/0x1c [kvm]
 [<ffffffff81156f5d>] fput+0x22a/0x3a0
 [<ffffffff81152288>] filp_close+0xb4/0xcd
 [<ffffffff8106599f>] put_files_struct+0x1b7/0x36b
 [<ffffffff81065830>] ? put_files_struct+0x48/0x36b
 [<ffffffff8131ee59>] ? do_raw_spin_unlock+0x118/0x160
 [<ffffffff81065bc0>] exit_files+0x6d/0x75
 [<ffffffff81068348>] do_exit+0x47d/0xc60
 [<ffffffff8177e7b5>] ? _raw_spin_unlock_irq+0x30/0x36
 [<ffffffff81068bfa>] do_group_exit+0xcf/0x134
 [<ffffffff81080790>] get_signal_to_deliver+0x732/0x81d
 [<ffffffff81095996>] ? cpu_clock+0x4e/0x60
 [<ffffffff81002082>] do_notify_resume+0x117/0xc43
 [<ffffffff810a2fa3>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff81080d79>] ? sys_rt_sigtimedwait+0x2b5/0x3bf
 [<ffffffff8177d9f2>] ? trace_hardirqs_off_thunk+0x3a/0x3c
 [<ffffffff81003221>] ? sysret_signal+0x5/0x3d
 [<ffffffff8100343b>] int_signal+0x12/0x17
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

We just introduced generic functions to handle shadow pages on PPC.
This patch makes the respective backends make use of them, getting
rid of a lot of duplicate code along the way.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Currently the shadow paging code keeps an array of entries it knows about.
Whenever the guest invalidates an entry, we loop through that entry,
trying to invalidate matching parts.

While this is a really simple implementation, it is probably the most
ineffective one possible. So instead, let's keep an array of lists around
that are indexed by a hash. This way each PTE can be added by 4 list_add,
removed by 4 list_del invocations and the search only needs to loop through
entries that share the same hash.

This patch implements said lookup and exports generic functions that both
the 32-bit and 64-bit backend can use.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Cleanup this function that we are already get the direct sp's access
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

If the mapping is writable but the dirty flag is not set, we will find
the read-only direct sp and setup the mapping, then if the write #PF
occur, we will mark this mapping writable in the read-only direct sp,
now, other real read-only mapping will happily write it without #PF.

It may hurt guest's COW

Fixed by re-install the mapping when write #PF occur.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

In no-direct mapping, we mark sp is 'direct' when we mapping the
guest's larger page, but its access is encoded form upper page-struct
entire not include the last mapping, it will cause access conflict.

For example, have this mapping:
        [W]
      / PDE1 -> |---|
  P[W]          |   | LPA
      \ PDE2 -> |---|
        [R]

P have two children, PDE1 and PDE2, both PDE1 and PDE2 mapping the
same lage page(LPA). The P's access is WR, PDE1's access is WR,
PDE2's access is RO(just consider read-write permissions here)

When guest access PDE1, we will create a direct sp for LPA, the sp's
access is from P, is W, then we will mark the ptes is W in this sp.

Then, guest access PDE2, we will find LPA's shadow page, is the same as
PDE's, and mark the ptes is RO.

So, if guest access PDE1, the incorrect #PF is occured.

Fixed by encode the last mapping access into direct shadow page
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

While we sync many unsync sp at one time(in mmu_sync_children()),
we may mapping the spte writable, it's dangerous, if one unsync
sp's mapping gfn is another unsync page's gfn.

For example:

SP1.pte[0] = P
SP2.gfn's pfn = P
[SP1.pte[0] = SP2.gfn's pfn]

First, we write protected SP1 and SP2, but SP1 and SP2 are still the
unsync sp.

Then, sync SP1 first, it will detect SP1.pte[0].gfn only has one unsync-sp,
that is SP2, so it will mapping it writable, but we plan to sync SP2 soon,
at this point, the SP2->unsync is not reliable since later we sync SP2 but
SP2->gfn is already writable.

So the final result is: SP2 is the sync page but SP2.gfn is writable.

This bug will corrupt guest's page table, fixed by mark read-only mapping
if the mapped gfn has shadow pages.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Some guest device driver may leverage the "Non-Snoop" I/O, and explicitly
WBINVD or CLFLUSH to a RAM space. Since migration may occur before WBINVD or
CLFLUSH, we need to maintain data consistency either by:
1: flushing cache (wbinvd) when the guest is scheduled out if there is no
wbinvd exit, or
2: execute wbinvd on all dirty physical CPUs when guest wbinvd exits.
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

No need to reload the mmu in between two different vcpu->requests checks.

kvm_mmu_reload() may trigger KVM_REQ_TRIPLE_FAULT, but that will be caught
during atomic guest entry later.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Older versions of 32-bit linux have a "Checking 'hlt' instruction"
test where they repeatedly call the 'hlt' instruction, and then
expect a timer interrupt to kick the CPU out of halt.  This happens
before any LAPIC or IOAPIC setup happens, which means that all of
the APIC's are in virtual wire mode at this point.  Unfortunately,
the current implementation of virtual wire mode is hardcoded to
only kick the BSP, so if a crash+kexec occurs on a different
vcpu, it will never get kicked.

This patch makes pic_unlock() do the equivalent of
kvm_irq_delivery_to_apic() for the IOAPIC code.  That is, it runs
through all of the vcpus looking for one that is in virtual wire
mode.  In the normal case where LAPICs and IOAPICs are configured,
this won't be used at all.  In the bootstrap phase of a modern
OS, before the LAPICs and IOAPICs are configured, this will have
exactly the same behavior as today; VCPU0 is always looked at
first, so it will always get out of the loop after the first
iteration.  This will only go through the loop more than once
during a kexec/kdump, in which case it will only do it a few times
until the kexec'ed kernel programs the LAPIC and IOAPIC.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

kvm_ia64_sync_dirty_log() is a helper function for kvm_vm_ioctl_get_dirty_log()
which copies ia64's arch specific dirty bitmap to general one in memslot.
So doing sanity checks in this function is unnatural. We move these checks
outside of this and change the prototype appropriately.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>

kvm_get_dirty_log() calls copy_to_user(). So we need to narrow the
dirty_log_lock spin_lock section not to include this.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>

When a guest sets its SR entry to invalid, we may still find a
corresponding entry in a BAT. So we need to make sure we're not
faulting on invalid SR entries, but instead just claim them to be
BAT resolved.

This resolves breakage experienced when using libogc based guests.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>

The linux kernel already provides a hash function. Let's reuse that
instead of reinventing the wheel!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>

Initially we had to search for pte entries to invalidate them. Since
the logic has improved since then, we can just get rid of the search
function.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>

is_hwpoison_address accesses the page table, so the caller must hold
current->mm->mmap_sem in read mode. So fix its usage in hva_to_pfn of
kvm accordingly.

Comment is_hwpoison_address to remind other users.
Reported-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Enable Intel(R) Advanced Vector Extension(AVX) for guest.

The detection of AVX feature includes OSXSAVE bit testing. When OSXSAVE bit is
not set, even if AVX is supported, the AVX instruction would result in UD as
well. So we're safe to expose AVX bits to guest directly.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

If a process with a memory slot is COWed, the page will change its address
(despite having an elevated reference count).  This breaks internal memory
slots which have their physical addresses loaded into vmcs registers (see
the APIC access memory slot).
Signed-off-by: Avi Kivity <avi@redhat.com>

May be used for distinguishing between internal and user slots, or for sorting
slots in size order.
Signed-off-by: Avi Kivity <avi@redhat.com>

Usually the vcpu->requests bitmap is sparse, so a test_and_clear_bit() for
each request generates a large number of unneeded atomics if a bit is set.

Replace with a separate test/clear sequence.  This is safe since there is
no clear_bit() outside the vcpu thread.
Signed-off-by: Avi Kivity <avi@redhat.com>

Makes it a little more readable and hackable.
Signed-off-by: Avi Kivity <avi@redhat.com>

Signed-off-by: Avi Kivity <avi@redhat.com>

Part of the i8259 code pretends it isn't part of kvm, but we know better.
Reduce excessive abstraction, eliminating callbacks and void pointers.
Signed-off-by: Avi Kivity <avi@redhat.com>

Equivalent (and better) functionality is provided by user-allocated memory
regions.
Signed-off-by: Avi Kivity <avi@redhat.com>

As advertised in feature-removal-schedule.txt.  Equivalent support is provided
by overlapping memory regions.
Signed-off-by: Avi Kivity <avi@redhat.com>

Newer (guest) kernels use sigp sense running in their spinlock
implementation to check if the other cpu is running before yielding
the processor. This revealed some wrong guest settings, causing
unnecessary exits for every sigp sense running.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

This patch fixes
ERROR: "__kvm_s390_vcpu_store_status" [arch/s390/kvm/kvm.ko] undefined!

triggered by
commit 3268c56840dcee78c3e928336550f4e1861504c4 (kvm.git)
Author: Avi Kivity <avi@redhat.com>
Date:   Thu May 13 12:21:46 2010 +0300
    KVM: s390: Centrally lock arch specific vcpu ioctls
Reported-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

Instead of three temporary variables and three free calls, have one temporary
variable (with four names) and one free call.
Signed-off-by: Avi Kivity <avi@redhat.com>