If we recorded with -g option to record the callchain, right now
we require a -g option to perf report as well - and people reported
this as unnecessary complication: the user already specified -g
once, no need to require it a second time.

So if the recording includes call-chains, display the callchain by
default from perf report.

( The user can override this default using "-g none" option from
  perf report. )
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

When the callchain tree comes to insert an empty backtrace, it
raises a spurious warning about the fact we are inserting an
empty. This is spurious because the radix tree assumes it did
something wrong to reach this state. But it didn't, we just met
an empty callchain that has to be ignored.

This happens occasionally with certain types of call-chain
recordings. If it happens it's a big nuisance as perf report
output starts with thousands of warning lines.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1249690585-9145-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1. Ignore the -A argument if there is no perf.data file
2. Treat an empty file like a non existent file.

Else, perf will try to read the perf.data header, and fail with
an error.

Treating an empty file like a non-existent file makes sense,
since an interupted (as in SIGKILLed) perf could leave such
files around, and you don't want to annoy the user with errors
for files with no data in it.
Signed-off-by: Pierre Habouzit <pierre.habouzit@intersec.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

While toying with perf, I've noticed that perf record can
easily enter a busy loop when doing something as silly as:

    $ perf record -A ls

Yeah, do_read here really wants to read a known size, not being
able to should die(), not busy-loop ;)

That was the cause for the bug.
Signed-off-by: Pierre Habouzit <pierre.habouzit@intersec.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Stop perf list from displaying tracepoints without an id file,
those are special tracepoints that are not interfaced to
perfcounters so listing them is erroneous and passing them as
events will produce no output.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

If we have the powerpc perf_counter backend compiled in, but
the cpu we are running on is one where we don't support the
PMU, we currently oops in hw_perf_group_sched_in if we try to
use any counters, because ppmu is NULL in that case, and we
unconditionally dereference ppmu.

This fixes the problem by adding a check if ppmu is NULL at the
beginning of hw_perf_group_sched_in, and also at the beginning
of the other functions that get called from the perf_counter
core, i.e. hw_perf_disable, hw_perf_enable, and
hw_perf_counter_setup.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: benh@kernel.crashing.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

We want to use a coherent flag for -S/--stat across all tools,
so free up -S in perf stat.
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf report: Add debug help for the finding of symbol bugs - show the symtab origin (DSO, build-id, kernel, etc)

Used with perf report --verbose:

[acme@doppio linux-2.6-tip]$ perf report -v | head -16
     5.17%  firefox  /usr/lib64/xulrunner-1.9.1/libxul.so   0x00000000005d8eee f [.] imgContainer::DrawFrameTo(gfxIImageFrame*, gfxIImageFrame*, nsRect&)
     2.56%  firefox  /lib64/libpthread-2.10.1.so            0x0000000000008e02 d [.] __pthread_mutex_lock_internal
     1.94%  firefox  /usr/lib64/xulrunner-1.9.1/libxul.so   0x0000000000d0af8f f [.] SearchTable
     1.75%  firefox  [kernel]                               0xffffffffff60013b k [.] vread_hpet
     1.63%  firefox  /lib64/libpthread-2.10.1.so            0x000000000000a404 d [.] __pthread_mutex_unlock
     1.47%  firefox  /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x00000000000482ea f [.] js_Interpret
     1.42%  firefox  /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x000000000003eda3 f [.] JS_CallTracer
     1.24%  firefox  [kernel]                               0xffffffff8102ca4a k [k] read_hpet
     1.16%  firefox  [kernel]                               0xffffffff810f3dd4 k [k] fget_light
     1.11%  firefox  /usr/lib64/xulrunner-1.9.1/libmozjs.so 0x00000000000567ff f [.] js_TraceObject
     0.98%  firefox  /usr/lib64/firefox-3.5.2/firefox       0x000000000000dd23 b [.] arena_ralloc
[acme@doppio linux-2.6-tip]$

The new field is just after the symbol address. To help in
figuring out symbol resolution bugs.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Brice Goglin reported:

> I can easily sort them by thread id, but I don't know how to match
> my 4 events with each group of 4 lines.

Also report the counter id and the time running/enabled
stats (in case the counter got time-shared).
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Brice Goglin reported that only the first result from a
multi-counter perf record --stat run is accurate, the
rest looks bogus.

A silly mistake made us re-read the first attribute for
every recorded attribute.
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Cc: paulus@samba.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The callchain fractal mode builds each new total hits in a new
branch of profiling by using the parent's hits of the current
branch plus the hits of the children.

This is wrong, the total hits of a branch should be made of the
sum of every children hits, we must ignore the parent hits in
this scope.

This patch also fixes another mistake with the hit counting.

Now the rates are correct.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: update perf top manual page to reflect
current implementation.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Pressing any key which is not currently mapped to
functionality, based on startup command line options, displays
currently mapped keys, and prompts for input.

Pressing any unmapped key at the prompt returns the user to
display mode with variables unchanged.  eg, pressing ? <SPACE>
<ESC> etc displays currently available keys, the value of the
variable associated with that key, and prompts.

Pressing same again aborts input.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Reimplement the software counters to deal with fast moving
event sources (such as tracepoints). This means being able
to generate multiple overflows from a single 'event' as well
as support throttling.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Allow perf top top users to switch between weighted and individual counter display

Add [w]eighted hotkey.  Pressing [w] toggles between displaying
weighted total of all counters, and the counter selected via
[E]vent select key.

------------------------------------------------------------------------------
   PerfTop:   90395 irqs/sec  kernel:16.1% [cache-misses/cache-references/instructions],  (all, 4 CPUs)
------------------------------------------------------------------------------

  weight     samples    pcnt         RIP          kernel function
  ______     _______   _____   ________________   _______________

1275408.6      10881 -  5.3% - ffffffff81146f70 : copy_page_c
 553683.4      43569 - 21.3% - ffffffff81146f20 : clear_page_c
  74075.0       6768 -  3.3% - ffffffff81147190 : copy_user_generic_string
  40602.9       7538 -  3.7% - ffffffff81284ba2 : _spin_lock
  26882.1        965 -  0.5% - ffffffff8109d280 : file_ra_state_init

[w]

------------------------------------------------------------------------------
   PerfTop:   91221 irqs/sec  kernel:14.5% [10000Hz cache-misses],  (all, 4 CPUs)
------------------------------------------------------------------------------

  weight     samples    pcnt         RIP          kernel function
  ______     _______   _____   ________________   _______________

            47320.00 - 22.3% - ffffffff81146f20 : clear_page_c
            14261.00 -  6.7% - ffffffff810992f5 : __rmqueue
            11046.00 -  5.2% - ffffffff81146f70 : copy_page_c
             7842.00 -  3.7% - ffffffff81284ba2 : _spin_lock
             7234.00 -  3.4% - ffffffff810aa1d6 : unmap_vmas
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf top used to have annotation support, but it has bitrotted and
removed.

This patch restores that: it allows the user to select any symbol
in kernel space for source level annotation on the fly, switch
between event counters and alter display variables. When symbol
details are being displayed, stopping annotation reverts to normal.

known keys:
        [d]     select display delay.
        [e]     select display entries (lines).
        [E]     select annotation event counter.
        [f]     select normal display count filter.
        [F]     select annotation display count filter (percentage).
        [qQ]    quit.
        [s]     select annotation symbol and start annotation.
        [S]     stop annotation, revert to normal display.
        [z]     toggle event count zeroing.

Sample:
------------------------------------------------------------------------------
   PerfTop:   16719 irqs/sec  kernel:78.7% [cache-misses/cache-references/instructions/cycles],  (all, 4 CPUs)
------------------------------------------------------------------------------

Showing cache-misses for e1000_clean_rx_irq
  Events  Pcnt (>=3%)
       0  0.0%                  /* adjust length to remove Ethernet CRC */
       0  0.0%                  if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
       0  0.0%                          length -= 4;
     436  5.0%      f039:       41 f6 84 24 5c 29 00    testb  $0x1,0x295c(%r12)
       0  0.0%      f089:       8b 4d 84                mov    -0x7c(%rbp),%ecx
       0  0.0%      f08c:       48 83 ef 02             sub    $0x2,%rdi
       0  0.0%      f090:       48 83 ee 02             sub    $0x2,%rsi
     811  9.3%      f094:       f3 a4                   rep movsb %ds:(%rsi),%es:(%rdi)
       0  0.0%
       0  0.0%          while (rx_desc->status & E1000_RXD_STAT_DD) {
       0  0.0%      f114:       41 f6 47 0c 01          testb  $0x1,0xc(%r15)
    7226 82.6%      f119:       0f 85 24 fe ff ff       jne    ef43 <e1000_clean_rx_irq+0x84>

Available events:
        0 cache-misses
        1 cache-references
        2 instructions
        3 cycles
Enter details event counter: 2
------------------------------------------------------------------------------
   PerfTop:   15035 irqs/sec  kernel:79.0% [cache-misses/cache-references/instructions/cycles],  (all, 4 CPUs)
------------------------------------------------------------------------------

Showing instructions for e1000_clean_rx_irq
  Events  Pcnt (>=3%)
       0  0.0%                                 int *work_done, int work_to_do)
       0  0.0%  {
     175  0.9%      eebf:       55                      push   %rbp
    1898  9.8%      eec0:       48 89 e5                mov    %rsp,%rbp
       0  0.0%
       0  0.0%          i = rx_ring->next_to_clean;
     140  0.7%      ef0a:       0f b7 41 1a             movzwl 0x1a(%rcx),%eax
     670  3.4%      ef0e:       89 45 ac                mov    %eax,-0x54(%rbp)
       0  0.0%  {
       0  0.0%          memcpy(skb->data + offset, from, len);
      91  0.5%      f07b:       49 8b b6 e8 00 00 00    mov    0xe8(%r14),%rsi
    1153  5.9%      f082:       48 8b b8 e8 00 00 00    mov    0xe8(%rax),%rdi
      42  0.2%      f089:       8b 4d 84                mov    -0x7c(%rbp),%ecx
      14  0.1%      f08c:       48 83 ef 02             sub    $0x2,%rdi
       0  0.0%      f090:       48 83 ee 02             sub    $0x2,%rsi
    1618  8.3%      f094:       f3 a4                   rep movsb %ds:(%rsi),%es:(%rdi)
       0  0.0%
       0  0.0%                  /* return some buffers to hardware, one at a time is too slow */
       0  0.0%                  if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
     867  4.5%      f0e7:       83 7d b0 0f             cmpl   $0xf,-0x50(%rbp)
       0  0.0%
       0  0.0%          while (rx_desc->status & E1000_RXD_STAT_DD) {
      37  0.2%      f114:       41 f6 47 0c 01          testb  $0x1,0xc(%r15)
    4047 20.8%      f119:       0f 85 24 fe ff ff       jne    ef43 <e1000_clean_rx_irq+0x84>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This patch implements the kernel side support for ftrace event
record sampling.

A new counter sampling attribute is added:

   PERF_SAMPLE_TP_RECORD

which requests ftrace events record sampling. In this case
if a PERF_TYPE_TRACEPOINT counter is active and a tracepoint
fires, we emit the tracepoint binary record to the
perfcounter event buffer, as a sample.

Result, after setting PERF_SAMPLE_TP_RECORD attribute from perf
record:

 perf record -f -F 1 -a -e workqueue:workqueue_execution
 perf report -D

 0x21e18 [0x48]: event: 9
 .
 . ... raw event: size 72 bytes
 .  0000:  09 00 00 00 01 00 48 00 d0 c7 00 81 ff ff ff ff  ......H........
 .  0010:  0a 00 00 00 0a 00 00 00 21 00 00 00 00 00 00 00  ........!......
 .  0020:  2b 00 01 02 0a 00 00 00 0a 00 00 00 65 76 65 6e  +...........eve
 .  0030:  74 73 2f 31 00 00 00 00 00 00 00 00 0a 00 00 00  ts/1...........
 .  0040:  e0 b1 31 81 ff ff ff ff                          .......
.
0x21e18 [0x48]: PERF_EVENT_SAMPLE (IP, 1): 10: 0xffffffff8100c7d0 period: 33

The raw ftrace binary record starts at offset 0020.

Translation:

 struct trace_entry {
	type		= 0x2b = 43;
	flags		= 1;
	preempt_count	= 2;
	pid		= 0xa = 10;
	tgid		= 0xa = 10;
 }

 thread_comm = "events/1"
 thread_pid  = 0xa = 10;
 func	    = 0xffffffff8131b1e0 = flush_to_ldisc()

What will come next?

 - Userspace support ('perf trace'), 'flight data recorder' mode
   for perf trace, etc.

 - The unconditional copy from the profiling callback brings
   some costs however if someone wants no such sampling to
   occur, and needs to be fixed in the future. For that we need
   to have an instant access to the perf counter attribute.
   This is a matter of a flag to add in the struct ftrace_event.

 - Take care of the events recursivity! Don't ever try to record
   a lock event for example, it seems some locking is used in
   the profiling fast path and lead to a tracing recursivity.
   That will be fixed using raw spinlock or recursivity
   protection.

 - [...]

 - Profit! :-)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Adds possible second part to the assign argument of TP_EVENT().

  TP_perf_assign(
	__perf_count(foo);
	__perf_addr(bar);
  )

Which, when specified make the swcounter increment with @foo instead
of the usual 1, and report @bar for PERF_SAMPLE_ADDR (data address
associated with the event) when this triggers a counter overflow.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: Merge up to almost-rc6 to pick up latest perfcounters
              (on which we'll queue up a dependent fix)
Signed-off-by: Ingo Molnar <mingo@elte.hu>

If filter_add_subsystem_pred() fails due to ENOSPC or ENOMEM,
the pred doesn't get freed, while as a side effect it does for
other errors. Make it so the caller always frees the pred for
any error.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1249746593.6453.32.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Dan Carpenter sent me a fix to prevent pred from being used if
it couldn't be allocated.  I noticed the same problem also
existed for the create_pred() case and added a fix for that.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1249746549.6453.29.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: fix oops on disconnect in cdc-acm
  USB: storage: include Prolific Technology USB drive in unusual_devs list
  USB: ftdi_sio: add product_id for Marvell OpenRD Base, Client
  USB: ftdi_sio: add vendor and product id for Bayer glucose meter serial converter cable
  USB: EHCI: fix counting of transaction error retries
  USB: EHCI: fix two new bugs related to Clear-TT-Buffer
  USB: usbfs: fix -ENOENT error code to be -ENODEV
  USB: musb: fix the nop registration for OMAP3EVM
  USB: devio: Properly do access_ok() checks
  USB: pl2303: New vendor and product id

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: rspiusb: Fix buffer overflow
  staging: add dependencies on PCI for drivers that require it
  Staging: rtl8192su: fix build error
  Staging: rt2870: Revert d44ca7 Removal of kernel_thread() API
  Staging: rt2870: Add USB ID for Linksys, Planex Communications, Belkin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (22 commits)
  drm/i915: Fix read outside array bounds in restoring the SWF10 range.
  drm/i915: Use our own workqueue to avoid wedging the system along with the GPU.
  drm/i915: Add support for dual-channel LVDS on 8xx.
  drm/i915: Return disconnected for SDVO DVI when there's no digital EDID.
  drm/i915: Choose real sdvo output according to result from detection
  drm/i915: Set preferred mode for integrated TV according to TV format
  drm/i915: fix 845G FIFO size & burst length
  drm/i915: fix VGA detect on IGDNG
  drm/i915: Add eDP support on IGDNG mobile chip
  drm/i915: enable DisplayPort support on IGDNG
  drm/i915: Fix channel ending action for DP aux transaction
  drm/i915: fix issue in display pipe setup on IGDNG
  drm/i915: disable VGA plane reliably
  drm/I915: Fix offset to DVO timings in LVDS data
  drm/i915: hdmi detection according by reading edid
  drm/i915: correct self-refresh calculation in "everything off" case
  drm/i915: handle FIFO oversubsription correctly
  drm/i915: FIFO watermark calculation fixes
  drm/i915: ignore lvds on AOpen Mini PC MP-915
  drm/i915: Allow frame buffers up to 4096x4096 on 915/945 class hardware
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: fix balancing oops when invalidate_inode_pages2 returns EBUSY
  Btrfs: correct error-handling zlib error handling
  Btrfs: remove superfluous NULL pointer check in btrfs_rename()
  Btrfs: make sure the async caching thread advances the key
  Btrfs: fix btrfs_remove_from_free_space corner case

* git://git.kernel.org/pub/scm/linux/kernel/git/hch/xfs-icache-races:
  xfs: fix freeing of inodes not yet added to the inode cache
  vfs: add __destroy_inode
  vfs: fix inode_init_always calling convention

usb_buffer_map_sg() may return -1. This will result in a read from
pdx->PixelUrb[frameInfo][-1]
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch adds PCI dependencies to staging drivers that require it.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This fixes a build error when selecting the rtl8192su driver as a
module.  This has been reported by me, and the opensuse kernel developer
team, and I finally tracked it down.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: Revert d44ca7 Removal of kernel_thread() API

The sanity check this patch introduced triggers on shutdown, apparently due to
threads having already exited by the time BUG_ON() is reached.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Teoh <htmldeveloper@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Linksys WUSB100, Belkin F5D8053 N, Planex Communications unknown model.
Signed-off-by: Jakob Gruber <jakob.gruber@kabelnet.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch fixes an oops caused when during an unplug a device's table
of endpoints is zeroed before the driver is notified. A pointer to
the endpoint must be cached.

this fixes a regression caused by commit
5186ffee
Therefore it should go into 2.6.31
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add a quirk entry for the Leading Driver UD-11 usb flash drive.

As Alan Stern told me, the device doesn't deal correctly with the
locking media feature of the device, and this patch incorporates it.

Compiled, tested, working.
Signed-off-by: Rogerio Brito <rbrito@ime.usp.br>
Cc: Phil Dibowitz <phil@ipom.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

reference:
http://www.open-rd.orgSigned-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Attached patch adds USB vendor and product IDs for Bayer's USB to serial
converter cable used by Bayer blood glucose meters. It seems to be a
FT232RL based device and works without any problem with ftdi_sio driver
when this patch is applied. See: http://winglucofacts.com/cables/Signed-off-by: Marko Hänninen <bugitus@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1274) simplifies the counting of transaction-error
retries.  Now we will count up from 0 to QH_XACTERR_MAX instead of
down from QH_XACTERR_MAX to 0.

The patch also fixes a small bug: qh->xacterr was not getting
initialized for interrupt endpoints.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1273) fixes two(!) bugs introduced by the new
Clear-TT-Buffer implementation in ehci-hcd.

	It is now possible for an idle QH to have some URBs on its
	queue -- this will happen if a Clear-TT-Buffer is pending for
	the QH's endpoint.  Consequently we should not issue a warning
	when someone tries to unlink an URB from an idle QH; instead
	we should process the request immediately.

	The refcounts for QHs could get messed up, because
	submit_async() would increment the refcount when calling
	qh_link_async() and qh_link_async() would then refuse to link
	the QH into the schedule if a Clear-TT-Buffer was pending.
	Instead we should increment the refcount only when the QH
	actually is added to the schedule.  The current code tries to
	be clever by leaving the refcount alone if an unlink is
	immediately followed by a relink; the patch changes this to an
	unconditional decrement and increment (although they occur in
	the opposite order).
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: David Brownell <david-b@pacbell.net>
Tested-by: Manuel Lauss <manuel.lauss@gmail.com>
Tested-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1272) changes the error code returned when an open call
for a USB device node fails to locate the corresponding device.  The
appropriate error code is -ENODEV, not -ENOENT.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Kay Sievers <kay.sievers@vrfy.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

OMAP3EVM uses ISP1504 phy which doesn't require any programming and
thus has to use NOP otg transceiver.

Cleanups being done:
	- Remove unwanted code in usb-musb.c file
	- Register NOP in OMAP3EVM board file using
	  usb_nop_xceiv_register().
	- Select NOP_USB_XCEIV for OMAP3EVM boards.
	- Don't enable TWL4030_USB in omap3_evm_defconfig
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Eino-Ville Talvala <talvala@stanford.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

access_ok() checks must be done on every part of the userspace structure
that is accessed. If access_ok() on one part of the struct succeeded, it
does not imply it will succeed on other parts of the struct. (Does
depend on the architecture implementation of access_ok()).

This changes the __get_user() users to first check access_ok() on the
data structure.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: stable <stable@kernel.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>