- 04 Jan, 2013 12 commits
-
-
Jiri Pirko authored
Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
This lists are supposed to serve for storing pointers to all upper devices. Eventually it will replace dev->master pointer which is used for bonding, bridge, team but it cannot be used for vlan, macvlan where there might be multiple upper present. In case the upper link is replacement for dev->master, it is marked with "master" flag. New upper device list resolves this limitation. Also, the information stored in lists is used for preventing looping setups like "bond->somethingelse->samebond" Signed-off-by:
-
Jiri Pirko authored
Previously, when invalid address was passed to ndo_set_mac_address, random mac was generated and set. Fix this by returning -EADDRNOTAVAIL in this situation. Also polish the code around a bit. Signed-off-by:
-
Jiri Pirko authored
Also remove unused "mac" from uml_net struct. Signed-off-by:
-
Jiri Pirko authored
NET_ADDR_SET is set in dev_set_mac_address() no need to alter dev->addr_assign_type value in drivers. Signed-off-by:
-
Jiri Pirko authored
This is the way to indicate that mac address of a device has been set by dev_set_mac_address() Signed-off-by:
-
Jiri Pirko authored
Not a bitfield, but a plain value. Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
Benefit from existence of dev_set_mac_address() and remove duplicate code. Signed-off-by:
-
- 03 Jan, 2013 3 commits
-
-
Flavio Leitner authored
Update master's carrier state when there is any change with its ports. Signed-off-by:
Flavio Leitner <fbl@redhat.com> Acked-by:
-
Sony Chacko authored
Fix the following error reported by kbuild test robot. static declaration of 'qlcnic_restore_indev_addr' follows non-static declaration. Signed-off-by:
Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by:
Sony Chacko <sony.chacko@qlogic.com> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 02 Jan, 2013 25 commits
-
-
Signed-off-by: Sony Chacko authored
Signed-off-by:
-
Shahed Shaikh authored
Signed-off-by:
-
Sony Chacko authored
83xx ethtool interface routines Signed-off-by:
Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by:
Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by:
Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by:
-
Sony Chacko authored
Add 83xx register dump routines Update 82xx register dump routines Signed-off-by:
Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by:
Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by:
-
Sony Chacko authored
Enable 83xx virtual NIC mode Signed-off-by:
-
Sony Chacko authored
Flash template provides instructions to stop, restart and initalize the firmware. These instructions are abstracted as a series of read, write and poll operations on hardware registers. Register information and operation specifics are not exposed to the driver. Driver reads the template from flash and executes the instructions located at pre-defined offsets. Template based firmware reset recovery and initialization mechanism minimize driver changes as firmware evolves. Signed-off-by:
-
Sony Chacko authored
Inter Driver Communication (IDC) module. CNA function drivers(ISCSI, FCOE and NIC) which shares the adapter relies on IDC mechanism for gracefull shut down, restart and firmware error recovery. Signed-off-by:
-
Sony Chacko authored
83xx adapter flash memory map, data structures and interface routines Signed-off-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
-
Sony Chacko authored
Add 83xx sysfs interface routines Update 82xx sysfs interface routines Signed-off-by:
-
Sony Chacko authored
Enable base 83xx adapter driver. Common driver interface routines like probe, interface up/down routines, irq and resource allocation routines are modified to add support for 83xx adapter. Signed-off-by:
-
Sony Chacko authored
Add 83xx adapter data path routines Update few 82xx adapter data path routines Modify datapath resource allocation routines Signed-off-by:
-
Sony Chacko authored
83xx adapter register map. 83xx hardware interface routines. Signed-off-by:
-
Himanshu Madhani authored
Refactor 82xx driver to support new adapter - Qlogic 83XX CNA Use QLC_SHARED_REG_RD32 and QLC__SHARED_REG_WR32 macros for 82xx and 83xx common register access. Signed-off-by:
-
Sony Chacko authored
Refactor 82xx driver to support new adapter - Qlogic 83XX CNA Create adapter abstraction layer and seperate 82xx hardware access routines. Create mailbox based HW interface mechanism Signed-off-by:
-
Ariel Elior authored
Add the various VF device ids (of all supported hardware) Add the calls to enable_sriov and disable_sriov to enable the SR-IOV feature. This patch also advances the version and release date of the bnx2x module. Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Ariel Elior authored
The PF <-> VF Bulletin Board is a simple interface between the PF and the VF. The main reason for the Bulletin Board is to allow the PF to be the initiator. The VF publishes at 'acquire' stage the GPA of a Bulletin Board structure it has allocated. The PF notes this GPA in the VF database. The VF samples the Bulletin Board periodically for new messages. The latest version of the BB is always used. Signed-off-by:
-
Ariel Elior authored
The FLR indication arrives as an attention from the management processor. Upon VF flr all FLRed function in the indication have already been released by Firmware and now we basically need to free the resources allocated to those VFs, and clean any remainders from the device (FLR final cleanup). Signed-off-by:
-
Ariel Elior authored
The 'release' request is the opposite of the 'acquire' request. At release, all the resources allocated to the VF are reclaimed. The release flow applies the close flow if applicable. Note that there are actually two types of release: 1. The VF has been removed, and so issued a 'release' request over the VF <-> PF Channel. 2. The PF is going down and so has to release all of it's VFs. Signed-off-by:
-
Ariel Elior authored
The 'close' command is the opposite of an init request. Here the queues of the VF are closed (if any are opened) and released. This flow applies the 'q_teardown' flow on all the queues. The VF state is changed by this request. Interrupts are disabled for the VF when closed. Signed-off-by:
-
Ariel Elior authored
The 'q_teardown' request is basically the opposite of the 'q_setup'. Here the PF driver removes from the device the queue it opened against the VF fastpath ring at 'setup_q' stage, along with all related rx_mode info. Signed-off-by:
-
Ariel Elior authored
The VF driver uses the 'q_filters' message on the VF <-> PF channel for configuring an open queue, for example when the rxmode changes. Signed-off-by:
-
Ariel Elior authored
Upon receiving a 'setup_q' request from the VF over the VF <-> PF channel the PF driver will open a corresponding queue in the device. The PF driver configures the queue with appropriate mac address, vlan configuration, etc from the VF. Signed-off-by:
-
Ariel Elior authored
Statistics are collected by the PF driver. The collection is performed via a query sent to the device which is basically an array of 3-tuples of the form (statistics client, function, DMAE address). In this patch the PF driver adds to the query, on top of the statistics clients it is maintaining for itself (rss queues, storage, etc), the 3-tuples for the VFs it is maintaining. The addresses used are the GPAs of the statistics buffers supplied by the VF in the init message on the VF <-> PF channel. The function parameter ensures that the iommu will translate the GPA to the correct physical address. Signed-off-by:
-
Ariel Elior authored
The VF driver will send an 'init' request as part of its nic load flow. This message is used by the VF to publish the GPA's of its status blocks, slow path ring and statistics buffer. The PF driver notes all this down in the VF database, and also uses this message to transfer the VF to VF_INIT state internally. Signed-off-by:
-
Ariel Elior authored
When a VF is probed by the VF driver, the VF driver sends an 'acquire' request over the VF <-> PF channel for the resources it needs to operate (interrupts, queues, etc). The PF driver either ratifies the request and allocates the resources, responds with the maximum values it will allow the VF to acquire, or fails the request entirely if there is a problem. Signed-off-by:
-
