- 05 Mar, 2013 40 commits
-
-
Hans Verkuil authored
Add device_caps support to querycap, fill in bus_info correctly and do not set the version field (let the core handle that). Also simplify the s_input ioctl. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Tested-by:
Arvydas Sidorenko <asido4@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Also correct the first_init static: this should be part of the stk_camera struct. Signed-off-by:
-
Hans Verkuil authored
file->private_data is needed to store the pointer to struct v4l2_fh. So use video_drvdata to get hold of the stk_camera struct. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
It's a webcam, the STD API is not applicable to webcams. Signed-off-by:
-
Hans Verkuil authored
And add an extensive comment relating the history of the upside-down handling in this driver. Signed-off-by:
-
Hans Verkuil authored
Tested on my big-endian ppc-based test machine. Signed-off-by:
-
Hans Verkuil authored
Tested on my big-endian ppc-based test machine. Signed-off-by:
-
Hans Verkuil authored
It's not working reliably if port 3 is enabled. Signed-off-by:
-
Hans Verkuil authored
The last set width/height must be preserved as per the spec. Signed-off-by:
-
Hans Verkuil authored
The 417 support doesn't work. Until someone can dig into this driver to figure out why it isn't working the 417 support is disabled. Sometimes you can actually stream a bit, but very soon the whole machine crashes, so something is seriously wrong. For the record, this was not introduced by my recent changes to this driver, it was broken before that. Signed-off-by:
-
Hans Verkuil authored
The prefix is generated automatically, so no need to provide it again. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Share tuner, frequency, debug and input ioctls with cx231xx-video. These are all shared resources, so no need to implement them again. [mchehab@redhat.com: Fix merge conflict and a checkpatch issue] Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Colorspace, field and priv were not set, and sizeimage was calculated using the wrong values (dev->ts1.ts_packet_size and dev->ts1.ts_packet_count can be 0 at module load). Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Set the initial standard of subdevices instead of leaving it undefined. Also update the width and height when a new standard is chosen and return -EBUSY when attempting to change the standard while videobuf is busy. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
There was already a core lock, so why wasn't ioctl already replaced by unlock_ioctl? This patch switches to unlocked_ioctl. Signed-off-by:
-
Hans Verkuil authored
The use of this field is deprecated since it will not work when multiple device nodes reference the same video input (the video and vbi nodes in this case). The norm field should be a device-global value. Signed-off-by:
-
Hans Verkuil authored
Required to resolve v4l2-compliance failures. Signed-off-by:
-
Hans Verkuil authored
This is needed to resolve the v4l2-compliance complaints about the control ioctls. Signed-off-by:
-
Hans Verkuil authored
Various v4l2-compliance fixes: remove unused sliced VBI functions, zero the reserved fields of struct v4l2_vbi_format and implement the missing s_fmt_vbi_cap. Signed-off-by:
-
Hans Verkuil authored
Let the tuner clamp the frequency and store that clamped value. This fixes a v4l2_compliance failure. Signed-off-by:
-
Hans Verkuil authored
The priv field of v4l2_pix_format must be zeroed. Also fix a bug in try_fmt where the current width was used instead of the width passed to try_fmt. Signed-off-by:
-
Hans Verkuil authored
The g_tuner call wasn't passed on to the subdevices, g_frequency didn't check for invalid tuners and a low-level function that was expected to return 0 or a negative error returned a positive number instead, causing s_frequency to return bogus errors. Signed-off-by:
-
Hans Verkuil authored
The audio selection code is broken. Audio and video indices were mixed up and s_audio would reject changing the audio input to something else anyway, so what's the point? All the audio input code has been removed. Signed-off-by:
-
Hans Verkuil authored
Radio should not use video or audio inputs. In addition, fix a bug in radio_g_tuner where s_tuner was called in the tuner subdev instead of g_tuner. Signed-off-by:
-
Hans Verkuil authored
This fixes a v4l2_compliance failure. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by:
-
Hans Verkuil authored
This fixes a v4l2_compliance failure. Signed-off-by:
-
Hans Verkuil authored
Note that the current driver does not implement enumaudio (so apps cannot tell that audio inputs are present), it does not set V4L2_CAP_AUDIO, nor does it set audioset when calling ENUM_INPUT. And G_AUDIO doesn't set the stereo flag either. So these g/s_audio ioctls are quite pointless and misleading. Especially since some surveillance boards do not have audio at all. Signed-off-by:
-
Hans Verkuil authored
Just opening the radio tuner should not cause a switch to the radio tuner. Only after calling g/s_tuner or g/s_frequency should this happen. This prevents audio being unmuted as soon as the driver is loaded because some process opens /dev/radioX just to see what sort of node it is, which switches on the radio tuner and unmutes audio. This code can be improved further by actually keeping track of who owns the tuner and returning -EBUSY if switching tuner modes will cause problems. But for now just fix the annoying case where on boot the radio turns on automatically. Signed-off-by:
-
Hans Verkuil authored
try_fmt_vid_overlay should map incorrect sizes and fields to valid values. It also expects that an initial overlay size is defined so g_fmt_vid_overlay returns valid information. Signed-off-by:
-
Hans Verkuil authored
The capability field of v4l2_tuner should be ORed by the various subdevs and by the main driver. In this case the stereo capability was dropped. Signed-off-by:
-
Hans Verkuil authored
Probe for additional tvaudio devices, and allow tvaudio+tda7432 to co-exist. My STB TV PCI FM bttv card has a tda7432, a tda9850 and a tea6420 and with this patch it finally works again (probably for the first time in many years). Signed-off-by:
-
Hans Verkuil authored
The 'current_norm' field cannot be used if multiple device nodes (video and vbi in this case) set the same std. Signed-off-by:
-
Hans Verkuil authored
Replace the - incorrect - manual priority handling with the core priority implementation. Signed-off-by:
-
