- 06 May, 2014 25 commits
-
-
Dave Gerlach authored
The VTT regulator for DDR3 termination on the am437x-gp-evm is controlled by a gpio. It is configured by the bootloader so here we define an always-on, fixed voltage regulator to hold the gpio. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Sekhar Nori authored
Add touchscreen support for AM437x GP EVM using pixcir touchscreen controller. CC: Benoit Cousson <bcousson@baylibre.com> CC: Tony Lindgren <tony@atomide.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Roger Quadros authored
Fixup Y resolution and add default pin state. Also update the compatible id. CC: Benoit Cousson <bcousson@baylibre.com> CC: Tony Lindgren <tony@atomide.com> CC: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Guido Martínez authored
Use phandles instead of unit adresses to reference usb and dma nodes. This makes the DT more robust and readable. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Guido Martínez authored
Use phandles instead of unit adresses to reference usb and dma nodes. This makes the DT more robust and readable. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Guido Martínez authored
Use phandles instead of unit adresses to reference usb and dma nodes. This makes the DT more robust and readable. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Guido Martínez authored
Use phandles instead of unit adresses to reference usb and dma nodes. This makes the DT more robust and readable. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Rajendra Nayak authored
The only difference from the dra74x devices is the missing .smp entry. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Rajendra Nayak authored
Use of const init definition must use __initconst so replace all such instances where __initdata is used. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Rajendra Nayak authored
DRA722 is part of DRA72x family which are single core cortex A15 devices with most infrastructure IPs otherwise same as whats on the DRA74x family. So move the cpu nodes into dra74x.dtsi and dra72x.dtsi respectively. Also add a minimal dra72-evm dts file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: linux-doc@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> [tony@atomide.com: updated for Makefile sorting] Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Rajendra Nayak authored
"ti,dra752" is neither documented nor correct, since the device is actually a dra742 device as rightly documented in dt bindings. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Sourav Poddar authored
This patch adds qspi nodes for am43xx SOC devices. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
Add support of AW-NH387 (mwifiex) WiFi/BT chip connected to MMC3. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Dmitry Lifshitz authored
Add support for CM-T54 CoM and SBC-T54 board: http://compulab.co.il/products/computer-on-modules/cm-t54/ http://compulab.co.il/products/sbcs/sbc-t54/ SBC-T54 is a single board computer based on OMAP5432 CPU. It is implemented with a CM-T54 CoM providing most of the functions, and SB-T54 carrier board providing connectors and several additional functions. Added basic support for: * PMIC * LED * MMC/SD * eMMC * USB * I2C1/4 * SB-T54 and CM-T54 EEPROMs * RTC Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> [tony@atomide.com: updated for Makefile sorting] Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Nathan Lynch authored
Expose the PMU on OMAP5. Tested with perf on OMAP5 uEVM. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Sakari Ailus authored
The N950/N9 uses two additional regulators from the twl 4030 for CSI-2 receiver (vaux2) and cameras (vaux3). Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Sebastian Reichel authored
This patch adds support for the Nokia N900's sound system. Signed-off-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Sebastian Reichel authored
Add madc node to twl4030, so that board DTS files can simply reference the A/D converter. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Sebastian Reichel authored
Add device tree support for the wireless chip built into the Nokia N900. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
George Cherian authored
Enable - USB PHY - USB for am43x-epos-evm Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
George Cherian authored
Enable - USB PHY - USB for am437x-gp-evm Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
George Cherian authored
Add nodes for 2 instances each of - ocp2scp - USB PHY control module - USB PHY - dwc3_omap - USB for AM43xx. Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
George Cherian authored
Add USB and USB PHY reference clock data Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> [tony@atomide.com: tabified] Signed-off-by: Tony Lindgren <tony@atomide.com>
-
George Cherian authored
Add the compatible "ti,am437x-dwc3" for dwc3 glue driver. Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Peter Robinson authored
With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 05 May, 2014 1 commit
-
-
Linus Torvalds authored
-
- 04 May, 2014 4 commits
-
-
git://git.samba.org/jlayton/linuxLinus Torvalds authored
Pull file locking change from Jeff Layton: "Only an email address change to the MAINTAINERS file" * tag 'locks-v3.15-3' of git://git.samba.org/jlayton/linux: MAINTAINERS: email address change for Jeff Layton
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: "These are mostly arm64 fixes with an additional arm(64) platform fix for the initialisation of vexpress clocks (the latter only affecting arm64; the arch/arm64 code is SoC agnostic and does not rely on early SoC-specific calls) - vexpress platform clocks initialisation moved earlier following the arm64 move of of_clk_init() call in a previous commit - Default DMA ops changed to non-coherent to preserve compatibility with 32-bit ARM DT files. The "dma-coherent" property can be used to explicitly mark a device coherent. The Applied Micro DT file has been updated to avoid DMA cache maintenance for the X-Gene SATA controller (the only arm64 related driver with such assumption in -rc mainline) - Fixmap correction for earlyprintk - kern_addr_valid() fix for huge pages" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: vexpress: Initialise the sysregs before setting up the clocks arm64: Mark the Applied Micro X-Gene SATA controller as DMA coherent arm64: Use bus notifiers to set per-device coherent DMA ops arm64: Make default dma_ops to be noncoherent arm64: fixmap: fix missing sub-page offset for earlyprintk arm64: Fix for the arm64 kern_addr_valid() function
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is two patches both fixing bugs in drivers (virtio-scsi and mpt2sas) causing an oops in certain circumstances" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] virtio-scsi: Skip setting affinity on uninitialized vq [SCSI] mpt2sas: Don't disable device twice at suspend.
-
Catalin Marinas authored
Following arm64 commit bc3ee18a (arm64: init: Move of_clk_init to time_init()), vexpress_osc_of_setup() is called via of_clk_init() long before initcalls are issued. Initialising the vexpress oscillators requires the vespress sysregs to be already initialised, so this patch adds an explicit call to vexpress_sysreg_of_early_init() in vexpress oscillator setup function. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Cc: Mike Turquette <mturquette@linaro.org>
-
- 03 May, 2014 10 commits
-
-
Catalin Marinas authored
Since the default DMA ops for arm64 are non-coherent, mark the X-Gene controller explicitly as dma-coherent to avoid additional cache maintenance. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Loc Ho <lho@apm.com>
-
Catalin Marinas authored
Recently, the default DMA ops have been changed to non-coherent for alignment with 32-bit ARM platforms (and DT files). This patch adds bus notifiers to be able to set the coherent DMA ops (with no cache maintenance) for devices explicitly marked as coherent via the "dma-coherent" DT property. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Ritesh Harjani authored
Currently arm64 dma_ops is by default made coherent which makes it opposite in default policy from arm. Make default dma_ops to be noncoherent (same as arm), as currently there aren't any dma-capable drivers which assumes coherent ops Signed-off-by: Ritesh Harjani <ritesh.harjani@gmail.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Marc Zyngier authored
Commit d57c33c5 (add generic fixmap.h) added (among other similar things) set_fixmap_io to deal with early ioremap of devices. More recently, commit bf4b558e (arm64: add early_ioremap support) converted the arm64 earlyprintk to use set_fixmap_io. A side effect of this conversion is that my virtual machines have stopped booting when I pass "earlyprintk=uart8250-8bit,0x3f8" to the guest kernel. Turns out that the new earlyprintk code doesn't care at all about sub-page offsets, and just assumes that the earlyprintk device will be page-aligned. Obviously, that doesn't play well with the above example. Further investigation shows that set_fixmap_io uses __set_fixmap instead of __set_fixmap_offset. A fix is to introduce a set_fixmap_offset_io that uses the latter, and to remove the superflous call to fix_to_virt (which only returns the value that set_fixmap_io has already given us). With this applied, my VMs are back in business. Tested on a Cortex-A57 platform with kvmtool as platform emulation. Cc: Will Deacon <will.deacon@arm.com> Acked-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Dave Anderson authored
Fix for the arm64 kern_addr_valid() function to recognize virtual addresses in the kernel logical memory map. The function fails as written because it does not check whether the addresses in that region are mapped at the pmd level to 2MB or 512MB pages, continues the page table walk to the pte level, and issues a garbage value to pfn_valid(). Tested on 4K-page and 64K-page kernels. Signed-off-by: Dave Anderson <anderson@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "This udpate delivers: - A fix for dynamic interrupt allocation on x86 which is required to exclude the GSI interrupts from the dynamic allocatable range. This was detected with the newfangled tablet SoCs which have GPIOs and therefor allocate a range of interrupts. The MSI allocations already excluded the GSI range, so we never noticed before. - The last missing set_irq_affinity() repair, which was delayed due to testing issues - A few bug fixes for the armada SoC interrupt controller - A memory allocation fix for the TI crossbar interrupt controller - A trivial kernel-doc warning fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: irq-crossbar: Not allocating enough memory irqchip: armanda: Sanitize set_irq_affinity() genirq: x86: Ensure that dynamic irq allocation does not conflict linux/interrupt.h: fix new kernel-doc warnings irqchip: armada-370-xp: Fix releasing of MSIs irqchip: armada-370-xp: implement the ->check_device() msi_chip operation irqchip: armada-370-xp: fix invalid cast of signed value into unsigned variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "This update brings along: - Two fixes for long standing bugs in the hrtimer code, one which prevents remote enqueuing and the other preventing arbitrary delays after a interrupt hang was detected - A fix in the timer wheel which prevents math overflow - A fix for a long standing issue with the architected ARM timer related to the C3STOP mechanism. - A trivial compile fix for nspire SoC clocksource" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timer: Prevent overflow in apply_slack hrtimer: Prevent remote enqueue of leftmost timers hrtimer: Prevent all reprogramming if hang detected clocksource: nspire: Fix compiler warning clocksource: arch_arm_timer: Fix age-old arch timer C3STOP detection issue
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "This is a small fix where the trigger code used the wrong rcu_dereference(). It required rcu_dereference_sched() instead of the normal rcu_dereference(). It produces a nasty RCU lockdep splat due to the incorrect rcu notation" Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> * tag 'trace-fixes-v3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Use rcu_dereference_sched() for trace event triggers
-
Steven Rostedt (Red Hat) authored
As trace event triggers are now part of the mainline kernel, I added my trace event trigger tests to my test suite I run on all my kernels. Now these tests get run under different config options, and one of those options is CONFIG_PROVE_RCU, which checks under lockdep that the rcu locking primitives are being used correctly. This triggered the following splat: =============================== [ INFO: suspicious RCU usage. ] 3.15.0-rc2-test+ #11 Not tainted ------------------------------- kernel/trace/trace_events_trigger.c:80 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 4 locks held by swapper/1/0: #0: ((&(&j_cdbs->work)->timer)){..-...}, at: [<ffffffff8104d2cc>] call_timer_fn+0x5/0x1be #1: (&(&pool->lock)->rlock){-.-...}, at: [<ffffffff81059856>] __queue_work+0x140/0x283 #2: (&p->pi_lock){-.-.-.}, at: [<ffffffff8106e961>] try_to_wake_up+0x2e/0x1e8 #3: (&rq->lock){-.-.-.}, at: [<ffffffff8106ead3>] try_to_wake_up+0x1a0/0x1e8 stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-rc2-test+ #11 Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006 0000000000000001 ffff88007e083b98 ffffffff819f53a5 0000000000000006 ffff88007b0942c0 ffff88007e083bc8 ffffffff81081307 ffff88007ad96d20 0000000000000000 ffff88007af2d840 ffff88007b2e701c ffff88007e083c18 Call Trace: <IRQ> [<ffffffff819f53a5>] dump_stack+0x4f/0x7c [<ffffffff81081307>] lockdep_rcu_suspicious+0x107/0x110 [<ffffffff810ee51c>] event_triggers_call+0x99/0x108 [<ffffffff810e8174>] ftrace_event_buffer_commit+0x42/0xa4 [<ffffffff8106aadc>] ftrace_raw_event_sched_wakeup_template+0x71/0x7c [<ffffffff8106bcbf>] ttwu_do_wakeup+0x7f/0xff [<ffffffff8106bd9b>] ttwu_do_activate.constprop.126+0x5c/0x61 [<ffffffff8106eadf>] try_to_wake_up+0x1ac/0x1e8 [<ffffffff8106eb77>] wake_up_process+0x36/0x3b [<ffffffff810575cc>] wake_up_worker+0x24/0x26 [<ffffffff810578bc>] insert_work+0x5c/0x65 [<ffffffff81059982>] __queue_work+0x26c/0x283 [<ffffffff81059999>] ? __queue_work+0x283/0x283 [<ffffffff810599b7>] delayed_work_timer_fn+0x1e/0x20 [<ffffffff8104d3a6>] call_timer_fn+0xdf/0x1be^M [<ffffffff8104d2cc>] ? call_timer_fn+0x5/0x1be [<ffffffff81059999>] ? __queue_work+0x283/0x283 [<ffffffff8104d823>] run_timer_softirq+0x1a4/0x22f^M [<ffffffff8104696d>] __do_softirq+0x17b/0x31b^M [<ffffffff81046d03>] irq_exit+0x42/0x97 [<ffffffff81a08db6>] smp_apic_timer_interrupt+0x37/0x44 [<ffffffff81a07a2f>] apic_timer_interrupt+0x6f/0x80 <EOI> [<ffffffff8100a5d8>] ? default_idle+0x21/0x32 [<ffffffff8100a5d6>] ? default_idle+0x1f/0x32 [<ffffffff8100ac10>] arch_cpu_idle+0xf/0x11 [<ffffffff8107b3a4>] cpu_startup_entry+0x1a3/0x213 [<ffffffff8102a23c>] start_secondary+0x212/0x219 The cause is that the triggers are protected by rcu_read_lock_sched() but the data is dereferenced with rcu_dereference() which expects it to be protected with rcu_read_lock(). The proper reference should be rcu_dereference_sched(). Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael Wysocki: "A bunch of regression fixes this time. They fix two regressions in the PNP subsystem, one in the ACPI processor driver and one in the ACPI EC driver, four cpufreq driver regressions and an unrelated bug in one of the drivers. The regressions are recent or introduced in 3.14. Specifics: - There are two bugs in the ACPI PNP core that cause errors to be returned if optional ACPI methods are not present. After an ACPI core change made in 3.14 one of those errors leads to serial port suspend failures on some systems. Fix from Rafael J Wysocki. - A recently added PNP quirk related to Intel chipsets intorduced a build error in unusual configurations (PNP without PCI). Fix from Bjorn Helgaas. - An ACPI EC workaround related to system suspend on Samsung machines added in 3.14 introduced a race causing some valid EC events to be discarded. Fix from Kieran Clancy. - The acpi-cpufreq driver fails to load on some systems after a 3.14 commit related to APIC ID parsing that overlooked one corner case. Fix from Lan Tianyu. - Fix for a recently introduced build problem in the ppc-corenet cpufreq driver from Tim Gardner. - A recent cpufreq core change to ensure serialization of frequency transitions for drivers with a ->target_index() callback overlooked the fact that some of those drivers had been doing operations introduced by it into the core already by themselves. That resulted in a mess in which the core and the drivers try to do the same thing and block each other which leads to deadlocks. Fixes for the powernow-k7, powernow-k6, and longhaul cpufreq drivers from Srivatsa S Bhat. - Fix for a computational error in the powernow-k6 cpufreq driver from Srivatsa S Bhat" * tag 'pm+acpi-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / processor: Fix failure of loading acpi-cpufreq driver PNP / ACPI: Do not return errors if _DIS or _SRS are not present PNP: Fix compile error in quirks.c ACPI / EC: Process rather than discard events in acpi_ec_clear cpufreq: ppc-corenet-cpufreq: Fix __udivdi3 modpost error cpufreq: powernow-k7: Fix double invocation of cpufreq_freq_transition_begin/end cpufreq: powernow-k6: Fix double invocation of cpufreq_freq_transition_begin/end cpufreq: powernow-k6: Fix incorrect comparison with max_multipler cpufreq: longhaul: Fix double invocation of cpufreq_freq_transition_begin/end
-