Fix memory leak in phy_device_free() for the case when phy_device*
returned by phy_device_create() is not registered in the system.

Bug description:
phy_device_create() sets name of kobject using dev_set_name(), which
allocates memory using kvasprintf(), but this memory isn't freed if
the underlying device isn't registered properly, because kobject_cleanup()
is not called in that case. This can happen (and actually is happening on
our machines) if phy_device_register(), called by mdiobus_scan(), fails.

Patch description:
Embedded struct device is initialized in phy_device_create() and it
counterpart phy_device_free() just drops one reference to the device,
which leads to proper deinitialization including releasing the kobject
name memory.
Signed-off-by: Petr Malat <oss@malat.biz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix condition typo for running KR2 work-around though it doesn't have
real effect since the typo bits matched by chance.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix KR2 link down problem after reboot when link speed is reconfigured via ethtool.
Since 1G/10G support link speed were missing by default, 1G/10G link speed were
not advertised.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the "ethtool -p" for boards with BCM84834, by using LED4 of the PHY
to toggle the link LED while keeping interrupt disabled to avoid NIG attentions,
and at the end restore NIG to previous state.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some hardware start settings implicitely assume an usual 1500 bytes mtu
that can't be guaranteed because changes of mtu may be requested both
before and after the hardware is started.
Reported-by: Tomi Orava <tomimo@ncircle.nullnet.fi>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP prequeue mechanism purpose is to let incoming packets
being processed by the thread currently blocked in tcp_recvmsg(),
instead of behalf of the softirq handler, to better adapt flow
control on receiver host capacity to schedule the consumer.

But in typical request/answer workloads, we send request, then
block to receive the answer. And before the actual answer, TCP
stack receives the ACK packets acknowledging the request.

Processing pure ACK on behalf of the thread blocked in tcp_recvmsg()
is a waste of resources, as thread has to immediately sleep again
because it got no payload.

This patch avoids the extra context switches and scheduler overhead.

Before patch :

a:~# echo 0 >/proc/sys/net/ipv4/tcp_low_latency
a:~# perf stat ./super_netperf 300 -t TCP_RR -l 10 -H 7.7.7.84 -- -r 8k,8k
231676

 Performance counter stats for './super_netperf 300 -t TCP_RR -l 10 -H 7.7.7.84 -- -r 8k,8k':

     116251.501765 task-clock                #   11.369 CPUs utilized
         5,025,463 context-switches          #    0.043 M/sec
         1,074,511 CPU-migrations            #    0.009 M/sec
           216,923 page-faults               #    0.002 M/sec
   311,636,972,396 cycles                    #    2.681 GHz
   260,507,138,069 stalled-cycles-frontend   #   83.59% frontend cycles idle
   155,590,092,840 stalled-cycles-backend    #   49.93% backend  cycles idle
   100,101,255,411 instructions              #    0.32  insns per cycle
                                             #    2.60  stalled cycles per insn
    16,535,930,999 branches                  #  142.243 M/sec
       646,483,591 branch-misses             #    3.91% of all branches

      10.225482774 seconds time elapsed

After patch :

a:~# echo 0 >/proc/sys/net/ipv4/tcp_low_latency
a:~# perf stat ./super_netperf 300 -t TCP_RR -l 10 -H 7.7.7.84 -- -r 8k,8k
233297

 Performance counter stats for './super_netperf 300 -t TCP_RR -l 10 -H 7.7.7.84 -- -r 8k,8k':

      91084.870855 task-clock                #    8.887 CPUs utilized
         2,485,916 context-switches          #    0.027 M/sec
           815,520 CPU-migrations            #    0.009 M/sec
           216,932 page-faults               #    0.002 M/sec
   245,195,022,629 cycles                    #    2.692 GHz
   202,635,777,041 stalled-cycles-frontend   #   82.64% frontend cycles idle
   124,280,372,407 stalled-cycles-backend    #   50.69% backend  cycles idle
    83,457,289,618 instructions              #    0.34  insns per cycle
                                             #    2.43  stalled cycles per insn
    13,431,472,361 branches                  #  147.461 M/sec
       504,470,665 branch-misses             #    3.76% of all branches

      10.249594448 seconds time elapsed
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lee A. Roberts says:

====================
This series of patches resolves several SCTP association hangs observed during
SCTP stress testing.  Observable symptoms include communications hangs with
data being held in the association reassembly and/or lobby (ordering) queues.
Close examination of reassembly/ordering queues may show either duplicated
or missing packets.

In version #2, corrected build failure in initial version of patch series
due to wrong calling sequence for sctp_ulpq_partial_delivery() being inserted
in sctp_ulpq_renege().

In version #3, adjusted patch documentation to be less repetitive.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In sctp_ulpq_tail_data(), use return values 0,1 to indicate whether
a complete event (with MSG_EOR set) was delivered.  A return value
of -ENOMEM continues to indicate an out-of-memory condition was
encountered.

In sctp_ulpq_retrieve_partial() and sctp_ulpq_retrieve_first(),
correct message reassembly logic for SCTP partial delivery.
Change logic to ensure that as much data as possible is sent
with the initial partial delivery and that following partial
deliveries contain all available data.

In sctp_ulpq_partial_delivery(), attempt partial delivery only
if the data on the head of the reassembly queue is at or before
the cumulative TSN ACK point.

In sctp_ulpq_renege(), use the modified return values from
sctp_ulpq_tail_data() to choose whether to attempt partial
delivery or to attempt to drain the reassembly queue as a
means to reduce memory pressure.  Remove call to
sctp_tsnmap_mark(), as this is handled correctly in call to
sctp_ulpq_tail_data().
Signed-off-by: Lee A. Roberts <lee.roberts@hp.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

In sctp_ulpq_renege_list(), events being reneged from the
ordering queue may correspond to multiple TSNs.  Identify
all affected packets; sum freed space and renege from the
tsnmap.
Signed-off-by: Lee A. Roberts <lee.roberts@hp.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

In sctp_ulpq_renege_list(), do not renege packets below the
cumulative TSN ACK point.
Signed-off-by: Lee A. Roberts <lee.roberts@hp.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

In sctp_tsnmap_mark(), correct off-by-one error when calculating
size value for sctp_tsnmap_grow().

In sctp_tsnmap_grow(), correct off-by-one error when copying
and resizing the tsnmap.  If max_tsn_seen is in the LSB of the
word, this bit can be lost, causing the corresponding packet
to be transmitted again and to be entered as a duplicate into
the SCTP reassembly/ordering queues.  Change parameter name
from "gap" (zero-based index) to "size" (one-based) to enhance
code readability.
Signed-off-by: Lee A. Roberts <lee.roberts@hp.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

Building sctp may fail with:

In function ‘copy_from_user’,
    inlined from ‘sctp_getsockopt_assoc_stats’ at
    net/sctp/socket.c:5656:20:
arch/x86/include/asm/uaccess_32.h:211:26: error: call to
    ‘copy_from_user_overflow’ declared with attribute error: copy_from_user()
    buffer size is not provably correct

if built with W=1 due to a missing parameter size validation
before the call to copy_from_user.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This USB ethernet adapter was purchased in anodyne packaging
from the computer store adjacent to linux.conf.au 2013 in
Canberra (Australia). A web search shows other recent
purchasers in Lancaster (UK) and Seattle (USA). Just like an
emergent virus, our age of e-commerce and airmail allows
underdocumented hardware to spread around the world instantly
using the vector of ridiculously low prices.

Paige Thompson, infected via eBay, discovered that the HG20F9
is a copy of the Asix 88772B; many viruses copy the RNA of
other viruses. See Paige's work at
<https://github.com/paigeadele/HG20F9>.
This patch uses her discovery to update the restructured Asix
driver in the current kernel.

Just as some viruses inhabit seemingly-healthy cells, the
HG20F9 uses the Vendor ID 0x066b assigned to Linksys Inc.
For the present there is no clash of Product ID 0x20f9.
Signed-off-by: Glen Turner <gdt@gdt.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tag all Huawei NCM devices as WWAN modems, as we don't know of any which
are not.  This is necessary for userspace clients to know that the device
requires further setup on e.g. an AT-capable serial ports before
connectivity is available.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 86564c3f "bnx2x: Remove many sparse warnings" UDP
csum offload is broken for 57710/57711. Fix return value.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
CC: Ariel Elior <ariele@broadcom.com>
CC: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

charset comes from skb->data.  It's a number in the 0-255 range.
If we have debugging turned on then this could cause a read beyond
the end of the array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While PROC_CN_MCAST_LISTEN/IGNORE is entirely advisory, it was possible
for an unprivileged user to turn off notifications for all listeners by
sending PROC_CN_MCAST_IGNORE. Instead, require the same privileges as
required for a multicast bind.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: stable@vger.kernel.org
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Acked-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add missing usb_free_urb() on failure path in st5481_setup_usb().

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Marina Makienko <makienko@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

in bond_enslave(), check slave_cnt before actually using slave address.

introduced by:
commit 409cc1f8 (bond: have random dev address by default instead of zeroes)
Reported-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make cpsw_add_default_vlan() look at the actual number of slaves for its
iteration, so boards with less than 2 slaves don't ooops at boot.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
The following patchset contains two bugfixes for netfilter/ipset via
Jozsef Kadlecsik, they are:

* Fix timeout corruption if sets are resized, by Josh Hunt.

* Fix bogus error report if the flag nomatch is set, from Jozsef.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Ben Hutchings says:

====================
Some fixes that should go into 3.9:

1. Fix packet corruption when using non-coherent RX DMA buffers.
2. Fix occasional watchdog misfiring when changing MTU or ring size.

These are longstanding bugs and should be fixed in stable as well, but
I'd like to review other recent fixes first and send a separate request
for stable inclusion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) ping_err() ICMP error handler looks at wrong ICMP header, from Li
    Wei.

 2) TCP socket hash function on ipv6 is too weak, from Eric Dumazet.

 3) netif_set_xps_queue() forgets to drop mutex on errors, fix from
    Alexander Duyck.

 4) sum_frag_mem_limit() can deadlock due to lack of BH disabling, fix
    from Eric Dumazet.

 5) TCP SYN data is miscalculated in tcp_send_syn_data(), because the
    amount of TCP option space was not taken into account properly in
    this code path.  Fix from yuchung Cheng.

 6) MLX4 driver allocates device queues with the wrong size, from Kleber
    Sacilotto.

 7) sock_diag can access past the end of the sock_diag_handlers[] array,
    from Mathias Krause.

 8) vlan_set_encap_proto() makes incorrect assumptions about where
    skb->data points, rework the logic so that it works regardless of
    where skb->data happens to be.  From Jesse Gross.

 9) Fix gianfar build failure with NET_POLL enabled, from Paul
    Gortmaker.

10) Fix Ipv4 ID setting and checksum calculations in GRE driver, from
   Pravin B Shelar.

11) bgmac driver does:

        int i;

        for (i = 0; ...; ...) {
                ...
                for (i = 0; ...; ...) {

    effectively corrupting the outer loop index, use a seperate
    variable for the inner loops.  From Rafał Miłecki.

12) Fix suspend bugs in smsc95xx driver, from Ming Lei.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  usbnet: smsc95xx: rename FEATURE_AUTOSUSPEND
  usbnet: smsc95xx: fix broken runtime suspend
  usbnet: smsc95xx: fix suspend failure
  bgmac: fix indexing of 2nd level loops
  b43: Fix lockdep splat on module unload
  Revert "ip_gre: propogate target device GSO capability to the tunnel device"
  IP_GRE: Fix GRE_CSUM case.
  VXLAN: Use tunnel_ip_select_ident() for tunnel IP-Identification.
  IP_GRE: Fix IP-Identification.
  net/pasemi: Fix missing coding style
  vmxnet3: fix ethtool ring buffer size setting
  vmxnet3: make local function static
  bnx2x: remove dead code and make local funcs static
  gianfar: fix compile fail for NET_POLL=y due to struct packing
  vlan: adjust vlan_set_encap_proto() for its callers
  sock_diag: Simplify sock_diag_handlers[] handling in __sock_diag_rcv_msg
  sock_diag: Fix out-of-bounds access to sock_diag_handlers[]
  vxlan: remove depends on CONFIG_EXPERIMENTAL
  mlx4_en: fix allocation of CPU affinity reverse-map
  mlx4_en: fix allocation of device tx_cq
  ...

Pull scsi target updates from Nicholas Bellinger:
 "The highlights in this series include:

   - Improve sg_table lookup scalability in RAMDISK_MCP (martin)

   - Add device attribute to expose config name for INQUIRY model (tregaron)

   - Convert tcm_vhost to use lock-less list for cmd completion (asias)

   - Add tcm_vhost support for multiple target's per endpoint (asias)

   - Add tcm_vhost support for multiple queues per vhost (asias)

   - Add missing mapped_lun bounds checking during make_mappedlun setup
     in generic fabric configfs code (jan engelhardt + nab)

   - Enforce individual iscsi-target network portal export once per
     TargetName endpoint (grover + nab)

   - Add WRITE_SAME w/ UNMAP=0 emulation to FILEIO backend (nab)

  Things have been mostly quiet this round, with majority of the work
  being done on the iser-target WIP driver + associated iscsi-target
  refactoring patches currently in flight for v3.10 code.

  At this point there is one patch series left outstanding from Asias to
  add support for UNMAP + WRITE_SAME w/ UNMAP=1 to FILEIO awaiting
  feedback from hch & Co, that will likely be included in a post
  v3.9-rc1 PULL request if there are no objections.

  Also, there is a regression bug recently reported off-list that seems
  to be effecting v3.5 and v3.6 kernels with MSFT iSCSI initiators that
  is still being tracked down.  No word if this effects >= v3.7 just
  yet, but if so there will likely another PULL request coming your
  way.."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits)
  target: Rename spc_get_write_same_sectors -> sbc_get_write_same_sectors
  target/file: Add WRITE_SAME w/ UNMAP=0 emulation support
  iscsi-target: Enforce individual network portal export once per TargetName
  iscsi-target: Refactor iscsit_get_np sockaddr matching into iscsit_check_np_match
  target: Add missing mapped_lun bounds checking during make_mappedlun setup
  target: Fix lookup of dynamic NodeACLs during cached demo-mode operation
  target: Fix parameter list length checking in MODE SELECT
  target: Fix error checking for UNMAP commands
  target: Fix sense data for out-of-bounds IO operations
  target_core_rd: break out unterminated loop during copy
  tcm_vhost: Multi-queue support
  tcm_vhost: Multi-target support
  target: Add device attribute to expose config_item_name for INQUIRY model
  target: don't truncate the fail intr address
  target: don't always say "ipv6" as address type
  target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status
  iscsi-target: make some temporary buffers larger
  tcm_vhost: Optimize gup in vhost_scsi_map_to_sgl
  tcm_vhost: Use iov_num_pages to calculate sgl_count
  tcm_vhost: Introduce iov_num_pages
  ...

Pull infiniband update from Roland Dreier:
 "Main batch of InfiniBand/RDMA changes for 3.9:

   - SRP error handling fixes from Bart Van Assche

   - Implementation of memory windows for mlx4 from Shani Michaeli

   - Lots of cxgb4 HW driver fixes from Vipul Pandya

   - Make iSER work for virtual functions, other fixes from Or Gerlitz

   - Fix for bug in qib HW driver from Mike Marciniszyn

   - IPoIB fixes from me, Itai Garbi, Shlomo Pongratz, Yan Burman

   - Various cleanups and warning fixes from Julia Lawall, Paul Bolle,
     Wei Yongjun"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (41 commits)
  IB/mlx4: Advertise MW support
  IB/mlx4: Support memory window binding
  mlx4: Implement memory windows allocation and deallocation
  mlx4_core: Enable memory windows in {INIT, QUERY}_HCA
  mlx4_core: Disable memory windows for virtual functions
  IPoIB: Free ipoib neigh on path record failure so path rec queries are retried
  IB/srp: Fail I/O requests if the transport is offline
  IB/srp: Avoid endless SCSI error handling loop
  IB/srp: Avoid sending a task management function needlessly
  IB/srp: Track connection state properly
  IB/mlx4: Remove redundant NULL check before kfree
  IB/mlx4: Fix compiler warning about uninitialized 'vlan' variable
  IB/mlx4: Convert is_xxx variables in build_mlx_header() to bool
  IB/iser: Enable iser when FMRs are not supported
  IB/iser: Avoid error prints on EAGAIN registration failures
  IB/iser: Use proper define for the commands per LUN value advertised to SCSI ML
  IB/uverbs: Implement memory windows support in uverbs
  IB/core: Add "type 2" memory windows support
  mlx4_core: Propagate MR deregistration failures to caller
  mlx4_core: Rename MPT-related functions to have mpt_ prefix
  ...

Pull IOMMU Updates from Joerg Roedel:
 "Besides some fixes and cleanups in the code there are three more
  important changes to point out this time:

	* New IOMMU driver for the ARM SHMOBILE platform
	* An IOMMU-API extension for non-paging IOMMUs (required for
	  upcoming PAMU driver)
	* Rework of the way the Tegra IOMMU driver accesses its
	  registetrs - register windows are easier to extend now.

  There are also a few changes to non-iommu code, but that is acked by
  the respective maintainers."

* tag 'iommu-updates-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (23 commits)
  iommu/tegra: assume CONFIG_OF in SMMU driver
  iommu/tegra: assume CONFIG_OF in gart driver
  iommu/amd: Remove redundant NULL check before dma_ops_domain_free().
  iommu/amd: Initialize device table after dma_ops
  iommu/vt-d: Zero out allocated memory in dmar_enable_qi
  iommu/tegra: smmu: Fix incorrect mask for regbase
  iommu/exynos: Make exynos_sysmmu_disable static
  ARM: mach-shmobile: r8a7740: Add IPMMU device
  ARM: mach-shmobile: sh73a0: Add IPMMU device
  ARM: mach-shmobile: sh7372: Add IPMMU device
  iommu/shmobile: Add iommu driver for Renesas IPMMU modules
  iommu: Add DOMAIN_ATTR_WINDOWS domain attribute
  iommu: Add domain window handling functions
  iommu: Implement DOMAIN_ATTR_PAGING attribute
  iommu: Check for valid pgsize_bitmap in iommu_map/unmap
  iommu: Make sure DOMAIN_ATTR_MAX is really the maximum
  iommu/tegra: smmu: Change SMMU's dependency on ARCH_TEGRA
  iommu/tegra: smmu: Use helper function to check for valid register offset
  iommu/tegra: smmu: Support variable MMIO ranges/blocks
  iommu/tegra: Add missing spinlock initialization
  ...

Pull DMA-mapping updates from Marek Szyprowski:
 "This time all patches are related only to ARM DMA-mapping subsystem.
  The main extension provided by this pull request is highmem support.
  Besides that it contains a bunch of small bugfixes and cleanups."

* 'for-v3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: DMA-mapping: fix memory leak in IOMMU dma-mapping implementation
  ARM: dma-mapping: Add maximum alignment order for dma iommu buffers
  ARM: dma-mapping: use himem for DMA buffers for IOMMU-mapped devices
  ARM: dma-mapping: add support for CMA regions placed in highmem zone
  arm: dma mapping: export arm iommu functions
  ARM: dma-mapping: Add arm_iommu_detach_device()
  ARM: dma-mapping: Add macro to_dma_iommu_mapping()
  ARM: dma-mapping: Set arm_dma_set_mask() for iommu->set_dma_mask()
  ARM: iommu: Include linux/kref.h in asm/dma-iommu.h

Pull i2c updates from Wolfram Sang:
 "Highlights:

   - new drivers for Intel ismt & Broadcom bcm2835
   - a number of drivers got support for more variants and mostly got
     cleaned up on the way (sis630, i801, at91, tegra, designware)
   - i2c got rid of all *_set_drvdata(..., NULL) on remove/probe failure
   - removed the i2c_smbus_process_call from the core since there are no
     users
   - mxs can now switch between PIO and DMA depending on the message
     size and the bus speed can now be arbitrary

  In addition, there is the usual bunch of fixes, cleanups, devm_*
  conversions, etc"

Fixed conflict (and buggy devm_* conversion) in i2c-s3c2410.c

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (39 commits)
  i2c: Remove unneeded xxx_set_drvdata(..., NULL) calls
  i2c: pxa: remove incorrect __exit annotations
  i2c: ocores: Fix pointer to integer cast warning
  i2c: tegra: remove warning dump if timeout happen in transfer
  i2c: fix i2c-ismt.c printk format warning
  i2c: i801: Add Device IDs for Intel Wellsburg PCH
  i2c: add bcm2835 driver
  i2c: ismt: Add Seth and Myself as maintainers
  i2c: sis630: checkpatch cleanup
  i2c: sis630: display unsigned hex
  i2c: sis630: use hex to constants for SMBus commands
  i2c: sis630: fix behavior after collision
  i2c: sis630: clear sticky bits
  i2c: sis630: Add SIS964 support
  i2c: isch: Add module parameter for backbone clock rate if divider is unset
  i2c: at91: fix unsed variable warning when building with !CONFIG_OF
  i2c: Adding support for Intel iSMT SMBus 2.0 host controller
  i2c: sh_mobile: don't send a stop condition by default inside transfers
  i2c: sh_mobile: eliminate an open-coded "goto" loop
  i2c: sh_mobile: fix timeout error handling
  ...

Pull GPIO changes from Grant Likely:
 "This branch contains the usual set of individual driver improvements
  and bug fixes, as well as updates to the core code.  The more notable
  changes include:

   - Internally add new API for referencing GPIOs by gpio_desc instead
     of number.  Eventually this will become a public API

   - ACPI GPIO binding support"

* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (33 commits)
  arm64: select ARCH_WANT_OPTIONAL_GPIOLIB
  gpio: em: Use irq_domain_add_simple() to fix runtime error
  gpio: using common order: let 'static const' instead of 'const static'
  gpio/vt8500: memory cleanup missing
  gpiolib: Fix locking on gpio debugfs files
  gpiolib: let gpio_chip reference its descriptors
  gpiolib: use descriptors internally
  gpiolib: use gpio_chips list in gpiochip_find_base
  gpiolib: use gpio_chips list in sysfs ops
  gpiolib: use gpio_chips list in gpiochip_find
  gpiolib: use gpio_chips list in gpiolib_sysfs_init
  gpiolib: link all gpio_chips using a list
  gpio/langwell: cleanup driver
  gpio/langwell: Add Cloverview ids to pci device table
  gpio/lynxpoint: add chipset gpio driver.
  gpiolib: add missing braces in gpio_direction_show
  gpiolib-acpi: Fix error checks in interrupt requesting
  gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping
  gpiolib: remove gpiochip_reserve()
  arm: pxa: tosa: do not use gpiochip_reserve()
  ...

Pull PWM changes from Thierry Reding:
 "A new driver has been added to support the PWM mode of the timer
  counter blocks found on Atmel AT91 SoCs.  The VT8500 driver now
  supports changing the PWM signal polarity and the TI drivers (EHRPWM
  and ECAP) gained suspend and resume functionality.

  User drivers can now query the core for whether access to a PWM device
  will sleep (if the PWM chip is on a slow bus such as I2C or SPI).

  The pwm-backlight driver now handles the backlight BL_CORE_FBBLANK
  state in addition to the FB layer's blanking states.

  To round things off, a few fixes and cleanups are also included"

* tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: twl: Use to_twl() instead of container_of()
  pwm: tegra: assume CONFIG_OF
  pwm_backlight: Validate dft_brightness in main probe function
  pwm: Export pwm_{set,get}_chip_data()
  pwm: Make Kconfig entries more consistent
  pwm: Add can_sleep property to drivers
  pwm: Add pwm_can_sleep() as exported API to users
  pwm-backlight: handle BL_CORE_FBBLANK state
  pwm: pwm-tiecap: Low power sleep support
  pwm: pwm-tiehrpwm: Low power sleep support
  pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver
  pwm: vt8500: Add polarity support
  pwm: vt8500: Register write busy test performed incorrectly
  pwm: atmel: add Timer Counter Block PWM driver

Pull MMC update from Chris Ball:
 "MMC highlights for 3.9:

  Core:
   - Support for packed commands in eMMC 4.5.  (This requires a host
     capability to be turned on.  It increases write throughput by 20%+,
     but may also increase average write latency; more testing needed.)
   - Add DT bindings for capability flags.
   - Add mmc_of_parse() for shared DT parsing between drivers.

  Drivers:
   - android-goldfish: New MMC driver for the Android Goldfish emulator.
   - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection.
   - omap_hsmmc: Fix boot hangs with RPMB partitions.
   - sdhci-bcm2835: New driver for controller used by Raspberry Pi.
   - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio.
   - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs.
   - tmio_mmc: Add DT bindings, support for vccq regulator"

* tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (92 commits)
  mmc: tegra: assume CONFIG_OF, remove platform data
  mmc: add DT bindings for more MMC capability flags
  mmc: tmio: add support for the VccQ regulator
  mmc: tmio: remove unused and deprecated symbols
  mmc: sh_mobile_sdhi: use managed resource allocations
  mmc: sh_mobile_sdhi: remove unused .pdata field
  mmc: tmio-mmc: parse device-tree bindings
  mmc: tmio-mmc: define device-tree bindings
  mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings
  mmc: (cosmetic) remove "extern" from function declarations
  mmc: provide a standard MMC device-tree binding parser centrally
  mmc: detailed definition of CD and WP MMC line polarities in DT
  mmc: sdhi, tmio: only check flags in tmio-mmc driver proper
  mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch()
  mmc: sdhci: check voltage range only on regulators aware of voltage value
  mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
  mmc: support packed write command for eMMC4.5 devices
  mmc: add packed command feature of eMMC4.5
  mmc: rtsx: remove driving adjustment
  mmc: use regulator_can_change_voltage() instead of regulator_count_voltages
  ...

Pull LED subsystem update from Bryan Wu.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (61 commits)
  leds: leds-sunfire: use dev_err()/pr_err() instead of printk()
  leds: 88pm860x: Add missing of_node_put()
  leds: tca6507: Use of_get_child_count()
  leds: leds-pwm: make it depend on PWM and not HAVE_PWM
  Documentation: leds: update LP55xx family devices
  leds-lp55xx: fix problem on removing LED attributes
  leds-lp5521/5523: add author and copyright description
  leds-lp5521/5523: use new lp55xx common header
  leds-lp55xx: clean up headers
  leds-lp55xx: clean up definitions
  leds-lp55xx: clean up unused data and functions
  leds-lp55xx: clean up _remove()
  leds-lp55xx: add new function for removing device attribtues
  leds-lp55xx: code refactoring on selftest function
  leds-lp55xx: use common device attribute driver function
  leds-lp55xx: support device specific attributes
  leds-lp5523: use generic firmware interface
  leds-lp5521: use generic firmware interface
  leds-lp55xx: support firmware interface
  leds-lp55xx: add new lp55xx_register_sysfs() for the firmware interface
  ...

Pull slave-dmaengine updates from Vinod Koul:
 "This is fairly big pull by my standards as I had missed last merge
  window.  So we have the support for device tree for slave-dmaengine,
  large updates to dw_dmac driver from Andy for reusing on different
  architectures.  Along with this we have fixes on bunch of the drivers"

Fix up trivial conflicts, usually due to #include line movement next to
each other.

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (111 commits)
  Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT"
  ARM: dts: pl330: Add #dma-cells for generic dma binding support
  DMA: PL330: Register the DMA controller with the generic DMA helpers
  DMA: PL330: Add xlate function
  DMA: PL330: Add new pl330 filter for DT case.
  dma: tegra20-apb-dma: remove unnecessary assignment
  edma: do not waste memory for dma_mask
  dma: coh901318: set residue only if dma is in progress
  dma: coh901318: avoid unbalanced locking
  dmaengine.h: remove redundant else keyword
  dma: of-dma: protect list write operation by spin_lock
  dmaengine: ste_dma40: do not remove descriptors for cyclic transfers
  dma: of-dma.c: fix memory leakage
  dw_dmac: apply default dma_mask if needed
  dmaengine: ioat - fix spare sparse complain
  dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.c
  ioatdma: fix race between updating ioat->head and IOAT_COMPLETION_PENDING
  dw_dmac: add support for Lynxpoint DMA controllers
  dw_dmac: return proper residue value
  dw_dmac: fill individual length of descriptor
  ...

We must only ever stop TX queues when they are full or the net device
is not 'ready' so far as the net core, and specifically the watchdog,
is concerned.  Otherwise, the watchdog may fire *immediately* if no
packets have been added to the queue in the last 5 seconds.

The device is ready if all the following are true:

(a) It has a qdisc
(b) It is marked present
(c) It is running
(d) The link is reported up

(a) and (c) are normally true, and must not be changed by a driver.
(d) is under our control, but fake link changes may disturb userland.
This leaves (b).  We already mark the device absent during reset
and self-test, but we need to do the same during MTU changes and ring
reallocation.  We don't need to do this when the device is brought
down because then (c) is already false.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

We assume that the mapping between DMA and virtual addresses is done
on whole pages, so we can find the page offset of an RX buffer using
the lower bits of the DMA address.  However, swiotlb maps in units of
2K, breaking this assumption.

Add an explicit page_offset field to struct efx_rx_buffer.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

We may currently allocate two RX DMA buffers to a page, and only unmap
the page when the second is completed.  We do not sync the first RX
buffer to be completed; this can result in packet loss or corruption
if the last RX buffer completed in a NAPI poll is the first in a page
and is not DMA-coherent.  (In the middle of a NAPI poll, we will
handle the following RX completion and unmap the page *before* looking
at the content of the first buffer.)
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

Pull ACPI and power management fixes from Rafael Wysocki:

 - Fixes for blackfin and microblaze build problems introduced by the
   removal of global pm_idle.  From Lars-Peter Clausen.

 - OPP core build fix from Shawn Guo.

 - Error condition check fix for the new imx6q-cpufreq driver from Wei
   Yongjun.

 - Fix for an AER driver crash related to the lack of APEI
   initialization for acpi=off.  From Rafael J Wysocki.

 - Fix for a USB breakage on Thinkpad T430 related to ACPI power
   resources and PCI wakeup from Rafael J.  Wysocki.

* tag 'pm+acpi-fixes-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PM: Take unusual configurations of power resources into account
  imx6q-cpufreq: fix return value check in imx6q_cpufreq_probe()
  PM / OPP: fix condition for empty of_init_opp_table()
  ACPI / APEI: Fix crash in apei_hest_parse() for acpi=off
  microblaze idle: Fix compile error
  blackfin idle: Fix compile error

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug
    - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
    - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
    - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
    - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)

  PCI device hotplug
    - Clean up cpqphp dead code (Sasha Levin)
    - Disable ARI unless device and upstream bridge support it (Yijing Wang)
    - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)

  Power management
    - Don't touch ASPM if disabled (Joe Lawrence)
    - Fix ASPM link state management (Myron Stowe)

  Miscellaneous
    - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
    - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
    - Document hotplug resource and MPS parameters (Yijing Wang)
    - Add accessor for PCIe capabilities (Myron Stowe)
    - Drop pciehp suspend/resume messages (Paul Bolle)
    - Make pci_slot built-in only (not a module) (Jiang Liu)
    - Remove unused PCI/ACPI bind ops (Jiang Liu)
    - Removed used pci_root_bus (Bjorn Helgaas)"

* tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits)
  PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
  PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS
  ACPI / PCI: Make pci_slot built-in only, not a module
  PCI/PM: Clear state_saved during suspend
  PCI: Use atomic_inc_return() rather than atomic_add_return()
  PCI: Catch attempts to disable already-disabled devices
  PCI: Disable Bus Master unconditionally in pci_device_shutdown()
  PCI: acpiphp: Remove dead code for PCI host bridge hotplug
  PCI: acpiphp: Create companion ACPI devices before creating PCI devices
  PCI: Remove unused "rc" in virtfn_add_bus()
  PCI: pciehp: Drop suspend/resume ENTRY messages
  PCI/ASPM: Don't touch ASPM if forcibly disabled
  PCI/ASPM: Deallocate upstream link state even if device is not PCIe
  PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc
  PCI: Document hpiosize= and hpmemsize= resource reservation parameters
  PCI: Use PCI Express Capability accessor
  PCI: Introduce accessor to retrieve PCIe Capabilities Register
  PCI: Put pci_dev in device tree as early as possible
  PCI: Skip attaching driver in device_add()
  PCI: acpiphp: Keep driver loaded even if no slots found
  ...

Pull drm merge from Dave Airlie:
 "Highlights:

   - TI LCD controller KMS driver

   - TI OMAP KMS driver merged from staging

   - drop gma500 stub driver

   - the fbcon locking fixes

   - the vgacon dirty like zebra fix.

   - open firmware videomode and hdmi common code helpers

   - major locking rework for kms object handling - pageflip/cursor
     won't block on polling anymore!

   - fbcon helper and prime helper cleanups

   - i915: all over the map, haswell power well enhancements, valleyview
     macro horrors cleaned up, killing lots of legacy GTT code,

   - radeon: CS ioctl unification, deprecated UMS support, gpu reset
     rework, VM fixes

   - nouveau: reworked thermal code, external dp/tmds encoder support
     (anx9805), fences sleep instead of polling,

   - exynos: all over the driver fixes."

Lovely conflict in radeon/evergreen_cs.c between commit de0babd6
("drm/radeon: enforce use of radeon_get_ib_value when reading user cmd")
and the new changes that modified that evergreen_dma_cs_parse()
function.

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (508 commits)
  drm/tilcdc: only build on arm
  drm/i915: Revert hdmi HDP pin checks
  drm/tegra: Add list of framebuffers to debugfs
  drm/tegra: Fix color expansion
  drm/tegra: Split DC_CMD_STATE_CONTROL register write
  drm/tegra: Implement page-flipping support
  drm/tegra: Implement VBLANK support
  drm/tegra: Implement .mode_set_base()
  drm/tegra: Add plane support
  drm/tegra: Remove bogus tegra_framebuffer structure
  drm: Add consistency check for page-flipping
  drm/radeon: Use generic HDMI infoframe helpers
  drm/tegra: Use generic HDMI infoframe helpers
  drm: Add EDID helper documentation
  drm: Add HDMI infoframe helpers
  video: Add generic HDMI infoframe helpers
  drm: Add some missing forward declarations
  drm: Move mode tables to drm_edid.c
  drm: Remove duplicate drm_mode_cea_vic()
  gma500: Fix n, m1 and m2 clock limits for sdvo and lvds
  ...