- 08 Nov, 2014 3 commits
-
-
Nadav Amit authored
Now that KVM injects #UD on "unhandlable" error, it makes better sense to return such error on sysenter instead of directly injecting #UD to the guest. This allows to track more easily the unhandlable cases the emulator does not support. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Nadav Amit authored
APIC base relocation is unsupported by KVM. If anyone uses it, the least should be to report a warning in the hypervisor. Note that KVM-unit-tests uses this feature for some reason, so running the tests triggers the warning. Signed-off-by:
-
Nadav Amit authored
Commit 7fe864dc (KVM: x86: Mark VEX-prefix instructions emulation as unimplemented, 2014-06-02) marked VEX instructions as such in protected mode. VEX-prefix instructions are not supported relevant on real-mode and VM86, but should cause #UD instead of being decoded as LES/LDS. Fix this behaviour to be consistent with real hardware. Signed-off-by:
-
- 07 Nov, 2014 23 commits
-
-
Nadav Amit authored
Task-switch emulation checks the privilege level prior to performing the task-switch. This check is incorrect in the case of task-gates, in which the tss.dpl is ignored, and can cause superfluous exceptions. Moreover this check is unnecassary, since the CPU checks the privilege levels prior to exiting. Intel SDM 25.4.2 says "If CALL or JMP accesses a TSS descriptor directly outside IA-32e mode, privilege levels are checked on the TSS descriptor" prior to exiting. AMD 15.14.1 says "The intercept is checked before the task switch takes place but after the incoming TSS and task gate (if one was involved) have been checked for correctness." This patch removes the CPL checks for CALL and JMP. Signed-off-by:
-
Nadav Amit authored
When emulating LTR/LDTR/LGDT/LIDT, #GP should be injected if the base is non-canonical. Otherwise, VM-entry will fail. Signed-off-by:
-
Nadav Amit authored
LGDT and LIDT emulation logic is almost identical. Merge the logic into a single point to avoid redundancy. This will be used by the next patch that will ensure the bases of the loaded GDTR and IDTR are canonical. Signed-off-by:
-
Nadav Amit authored
If the emulation ends in fault, eflags should not be updated. However, several instruction emulations (actually all the fastops) currently update eflags, if the fault was detected afterwards (e.g., #PF during writeback). Signed-off-by:
-
Nadav Amit authored
Although Intel SDM mentions bit 63 is reserved, MOV to CR3 can have bit 63 set. As Intel SDM states in section 4.10.4 "Invalidation of TLBs and Paging-Structure Caches": " MOV to CR3. ... If CR4.PCIDE = 1 and bit 63 of the instructionâ€
™ s source operand is 0 ..." In other words, bit 63 is not reserved. KVM emulator currently consider bit 63 as reserved. Fix it. Signed-off-by: -
Nadav Amit authored
According to Intel SDM push of segment selectors is done in the following manner: "if the operand size is 32-bits, either a zero-extended value is pushed on the stack or the segment selector is written on the stack using a 16-bit move. For the last case, all recent Core and Atom processors perform a 16-bit move, leaving the upper portion of the stack location unmodified." This patch modifies the behavior to match the core behavior. Signed-off-by:
-
Nadav Amit authored
CMPS and SCAS instructions are evaluated in the wrong order. For reference (of CMPS), see http://www.fermimn.gov.it/linux/quarta/x86/cmps.htm : "Note that the direction of subtraction for CMPS is [SI] - [DI] or [ESI] - [EDI]. The left operand (SI or ESI) is the source and the right operand (DI or EDI) is the destination. This is the reverse of the usual Intel convention in which the left operand is the destination and the right operand is the source." Introducing em_cmp_r for this matter that performs comparison in reverse order using fastop infrastructure to avoid a wrapper function. Signed-off-by:
-
Nadav Amit authored
SYSCALL emulation currently clears in 64-bit mode eflags according to MSR_SYSCALL_MASK. However, on bare-metal eflags[1] which is fixed to one cannot be cleared, even if MSR_SYSCALL_MASK masks the bit. This wrong behavior may result in failed VM-entry, as VT disallows entry with eflags[1] cleared. This patch sets the bit after masking eflags on syscall. Signed-off-by:
-
Nadav Amit authored
In x86, you can only MOV-sreg to memory with either 16-bits or 64-bits size. In contrast, KVM may write to 32-bits memory on MOV-sreg. This patch fixes KVM behavior, and sets the destination operand size to two, if the destination is memory. When destination is registers, and the operand size is 32-bits, the high 16-bits in modern CPUs is filled with zero. This is handled correctly. Signed-off-by:
-
Nadav Amit authored
x86 debug registers hold a linear address. Therefore, breakpoints detection should consider CS.base, and check whether instruction linear address equals (CS.base + RIP). This patch introduces a function to evaluate RIP linear address and uses it for breakpoints detection. Signed-off-by:
-
Nadav Amit authored
DR6[0:3] (previous breakpoint indications) are cleared when #DB is injected during handle_exception, just as real hardware does. Similarily, handle_dr should clear DR6[0:3]. Signed-off-by:
-
Nadav Amit authored
It should clear B0-B3 and set BD. Signed-off-by:
-
Nadav Amit authored
Real-mode exceptions do not deliver error code. As can be seen in Intel SDM volume 2, real-mode exceptions do not have parentheses, which indicate error-code. To avoid significant changes of the code, the error code is "removed" during exception queueing. Signed-off-by:
-
Nadav Amit authored
In one occassion, decode_modrm uses the rm field after it is extended with REX.B to determine the addressing mode. Doing so causes it not to read the offset for rip-relative addressing with REX.B=1. This patch moves the fetch where we already mask REX.B away instead. Signed-off-by:
-
Wei Wang authored
A bug was reported as follows: when running Windows 7 32-bit guests on qemu-kvm, sometimes the guests run into blue screen during reboot. The problem was that a guest's RVI was not cleared when it rebooted. This patch has fixed the problem. Signed-off-by:
Wei Wang <wei.w.wang@intel.com> Signed-off-by:
Yang Zhang <yang.z.zhang@intel.com> Tested-by:
Rongrong Liu <rongrongx.liu@intel.com>, Da Chun <ngugc@qq.com> Signed-off-by:
-
Paolo Bonzini authored
Return a negative error code instead, and WARN() when we should be covering the entire 2-bit space of vmcs_field_type's return value. For increased robustness, add a BUILD_BUG_ON checking the range of vmcs_field_to_offset. Suggested-by:
Tiejun Chen <tiejun.chen@intel.com> Signed-off-by:
-
Tiejun Chen authored
Instead of vmx_init(), actually it would make reasonable sense to do anything specific to vmx hardware setting in vmx_x86_ops->hardware_setup(). Signed-off-by:
-
Tiejun Chen authored
Just move this pair of functions down to make sure later we can add something dependent on others. Signed-off-by:
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-20141107' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes for kvm/next (3.19) and stable 1. We should flush TLBs for load control instruction emulation (stable) 2. A workaround for a compiler bug that renders ACCESS_ONCE broken (stable) 3. Fix program check handling for load control 4. Documentation Fix
-
Dominik Dingel authored
Documentation uses incorrect attribute names for some vm device attributes: fix this. Signed-off-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Heiko Carstens authored
According to the architecture all instructions are suppressing if memory access is prohibited due to DAT protection, unless stated otherwise for an instruction. The lctl[g]/stctl[g] implementations handled this incorrectly since control register handling was done piecemeal, which means they had terminating instead of suppressing semantics. This patch fixes this. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by:
Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
some control register changes will flush some aspects of the CPU, e.g. POP explicitely mentions that for CR9-CR11 "TLBs may be cleared". Instead of trying to be clever and only flush on specific CRs, let play safe and flush on all lctl(g) as future machines might define new bits in CRs. Load control intercept should not happen that often. Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by:
-
Christian Borntraeger authored
ipte_unlock_siif uses cmpxchg to replace the in-memory data of the ipte lock together with ACCESS_ONCE for the intial read. union ipte_control { unsigned long val; struct { unsigned long k : 1; unsigned long kh : 31; unsigned long kg : 32; }; }; [...] static void ipte_unlock_siif(struct kvm_vcpu *vcpu) { union ipte_control old, new, *ic; ic = &vcpu->kvm->arch.sca->ipte_control; do { new = old = ACCESS_ONCE(*ic); new.kh--; if (!new.kh) new.k = 0; } while (cmpxchg(&ic->val, old.val, new.val) != old.val); if (!new.kh) wake_up(&vcpu->kvm->arch.ipte_wq); } The new value, is loaded twice from memory with gcc 4.7.2 of fedora 18, despite the ACCESS_ONCE: ---> l %r4,0(%r3) <--- load first 32 bit of lock (k and kh) in r4 alfi %r4,2147483647 <--- add -1 to r4 llgtr %r4,%r4 <--- zero out the sign bit of r4 lg %r1,0(%r3) <--- load all 64 bit of lock into new lgr %r2,%r1 <--- load the same into old risbg %r1,%r4,1,31,32 <--- shift and insert r4 into the bits 1-31 of new llihf %r4,2147483647 ngrk %r4,%r1,%r4 jne aa0 <ipte_unlock+0xf8> nihh %r1,32767 lgr %r4,%r2 csg %r4,%r1,0(%r3) cgr %r2,%r4 jne a70 <ipte_unlock+0xc8> If the memory value changes between the first load (l) and the second load (lg) we are broken. If that happens VCPU threads will hang (unkillable) in handle_ipte_interlock. Andreas Krebbel analyzed this and tracked it down to a compiler bug in that version: "while it is not that obvious the C99 standard basically forbids duplicating the memory access also in that case. For an argumentation of a similiar case please see: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=22278#c43 For the implementation-defined cases regarding volatile there are some GCC-specific clarifications which can be found here: https://gcc.gnu.org/onlinedocs/gcc/Volatiles.html#Volatiles I've tracked down the problem with a reduced testcase. The problem was that during a tree level optimization (SRA - scalar replacement of aggregates) the volatile marker is lost. And an RTL level optimizer (CSE - common subexpression elimination) then propagated the memory read into its second use introducing another access to the memory location. So indeed Christian's suspicion that the union access has something to do with it is correct (since it triggered the SRA optimization). This issue has been reported and fixed in the GCC 4.8 development cycle: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145" This patch replaces the ACCESS_ONCE scheme with a barrier() based scheme that should work for all supported compilers. Signed-off-by:
-
- 03 Nov, 2014 14 commits
-
-
Tiejun Chen authored
We can use get_cpu() and put_cpu() to replace preempt_disable()/cpu = smp_processor_id() and preempt_enable() for slightly better code. Signed-off-by:
-
Radim Krčmář authored
We mirror a subset of these registers in separate variables. Using them directly should be faster. Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Radim Krčmář authored
APIC-write VM exits are "trap-like": they save CS:RIP values for the instruction after the write, and more importantly, the handler will already see the new value in the virtual-APIC page. This means that apic_reg_write cannot use kvm_apic_get_reg to omit timer cancelation when mode changes. timer_mode_mask shouldn't be changing as it depends on cpuid. Signed-off-by:
-
Radim Krčmář authored
APIC-write VM exits are "trap-like": they save CS:RIP values for the instruction after the write, and more importantly, the handler will already see the new value in the virtual-APIC page. This caused a bug if you used KVM_SET_IRQCHIP to set the SW-enabled bit in the SPIV register. The chain of events is as follows: * When the irqchip is added to the destination VM, the apic_sw_disabled static key is incremented (1) * When the KVM_SET_IRQCHIP ioctl is invoked, it is decremented (0) * When the guest disables the bit in the SPIV register, e.g. as part of shutdown, apic_set_spiv does not notice the change and the static key is _not_ incremented. * When the guest is destroyed, the static key is decremented (-1), resulting in this trace: WARNING: at kernel/jump_label.c:81 __static_key_slow_dec+0xa6/0xb0() jump label: negative count! [<ffffffff816bf898>] dump_stack+0x19/0x1b [<ffffffff8107c6f1>] warn_slowpath_common+0x61/0x80 [<ffffffff8107c76c>] warn_slowpath_fmt+0x5c/0x80 [<ffffffff811931e6>] __static_key_slow_dec+0xa6/0xb0 [<ffffffff81193226>] static_key_slow_dec_deferred+0x16/0x20 [<ffffffffa0637698>] kvm_free_lapic+0x88/0xa0 [kvm] [<ffffffffa061c63e>] kvm_arch_vcpu_uninit+0x2e/0xe0 [kvm] [<ffffffffa05ff301>] kvm_vcpu_uninit+0x21/0x40 [kvm] [<ffffffffa067cec7>] vmx_free_vcpu+0x47/0x70 [kvm_intel] [<ffffffffa061bc50>] kvm_arch_vcpu_free+0x50/0x60 [kvm] [<ffffffffa061ca22>] kvm_arch_destroy_vm+0x102/0x260 [kvm] [<ffffffff810b68fd>] ? synchronize_srcu+0x1d/0x20 [<ffffffffa06030d1>] kvm_put_kvm+0xe1/0x1c0 [kvm] [<ffffffffa06036f8>] kvm_vcpu_release+0x18/0x20 [kvm] [<ffffffff81215c62>] __fput+0x102/0x310 [<ffffffff81215f4e>] ____fput+0xe/0x10 [<ffffffff810ab664>] task_work_run+0xb4/0xe0 [<ffffffff81083944>] do_exit+0x304/0xc60 [<ffffffff816c8dfc>] ? _raw_spin_unlock_irq+0x2c/0x50 [<ffffffff810fd22d>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [<ffffffff8108432c>] do_group_exit+0x4c/0xc0 [<ffffffff810843b4>] SyS_exit_group+0x14/0x20 [<ffffffff816d33a9>] system_call_fastpath+0x16/0x1b Signed-off-by:
-
Dominik Dingel authored
commit 72dc67a6 ("KVM: remove the usage of the mmap_sem for the protection of the memory slots.") changed the lock which will be taken. This should be reflected in the function commentary. Signed-off-by:
-
Chao Peng authored
Expose Intel AVX-512 feature bits to guest. Also add checks for xcr0 AVX512 related bits according to spec: http://download-software.intel.com/sites/default/files/managed/71/2e/319433-017.pdfSigned-off-by:
Chao Peng <chao.p.peng@linux.intel.com> Signed-off-by:
-
Michael S. Tsirkin authored
No kernel ever reported KVM_CAP_DEVICE_MSIX, KVM_CAP_DEVICE_MSI, KVM_CAP_DEVICE_ASSIGNMENT, KVM_CAP_DEVICE_DEASSIGNMENT. This makes the documentation wrong, and no application ever written to use these capabilities has a chance to work correctly. The only way to detect support is to try, and test errno for ENOTTY. That's unfortunate, but we can't fix the past. Document the actual semantics, and drop the definitions from the exported header to make it easier for application developers to note and fix the bug. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Radim Krčmář authored
The check in kvm_set_lapic_tscdeadline_msr() was trying to prevent a situation where we lose a pending deadline timer in a MSR write. Losing it is fine, because it effectively occurs before the timer fired, so we should be able to cancel or postpone it. Another problem comes from interaction with QEMU, or other userspace that can set deadline MSR without a good reason, when timer is already pending: one guest's deadline request results in more than one interrupt because one is injected immediately on MSR write from userspace and one through hrtimer later. The solution is to remove the injection when replacing a pending timer and to improve the usual QEMU path, we inject without a hrtimer when the deadline has already passed. Signed-off-by:
-
Radim Krčmář authored
Make the code reusable. If the timer was already pending, we shouldn't be waiting in a queue, so wake_up can be skipped, simplifying the path. There is no 'reinject' case => the comment is removed. Current race behaves correctly. Signed-off-by:
-
Tiejun Chen authored
When commit 6adba527 (KVM: Let host know whether the guest can handle async PF in non-userspace context.) is introduced, actually bit 2 still is reserved and should be zero. Instead, bit 1 is 1 to indicate if asynchronous page faults can be injected when vcpu is in cpl == 0, and also please see this, in the file kvm_para.h, #define KVM_ASYNC_PF_SEND_ALWAYS (1 << 1). Signed-off-by:
-
Nadav Amit authored
If DR4/5 is accessed when it is unavailable (since CR4.DE is set), then #UD should be generated even if CPL>0. This is according to Intel SDM Table 6-2: "Priority Among Simultaneous Exceptions and Interrupts". Note, that this may happen on the first DR access, even if the host does not sets debug breakpoints. Obviously, it occurs when the host debugs the guest. This patch moves the DR4/5 checks from __kvm_set_dr/_kvm_get_dr to handle_dr. The emulator already checks DR4/5 availability in check_dr_read. Nested virutalization related calls to kvm_set_dr/kvm_get_dr would not like to inject exceptions to the guest. As for SVM, the patch follows the previous logic as much as possible. Anyhow, it appears the DR interception code might be buggy - even if the DR access may cause an exception, the instruction is skipped. Signed-off-by:
-
Nadav Amit authored
When read access is performed using a readable code segment, the "conforming" and "non-conforming" checks should not be done. As a result, read using non-conforming readable code segment fails. This is according to Intel SDM 5.6.1 ("Accessing Data in Code Segments"). The fix is not to perform the "non-conforming" checks if the access is not a fetch; the relevant checks are already done when loading the segment. Signed-off-by: -
Nadav Amit authored
DR7.LE should be cleared during task-switch. This feature is poorly documented. For reference, see: http://pdos.csail.mit.edu/6.828/2005/readings/i386/s12_02.htm SDM [17.2.4]: This feature is not supported in the P6 family processors, later IA-32 processors, and Intel 64 processors. AMD [2:13.1.1.4]: This bit is ignored by implementations of the AMD64 architecture. Intel's formulation could mean that it isn't even zeroed, but current hardware indeed does not behave like that. Signed-off-by:
-
Nadav Amit authored
In long-mode, when the address size is 4 bytes, the linear address is not truncated as the emulator mistakenly does. Instead, the offset within the segment (the ea field) should be truncated according to the address size. As Intel SDM says: "In 64-bit mode, the effective address components are added and the effective address is truncated ... before adding the full 64-bit segment base." Signed-off-by:
-
