- 25 Feb, 2011 8 commits
-
-
Mark Brown authored
There's a general move to use dev_pm_ops rather than bus specific functions in order to facilitate work on the PM core. Do this conversion to WM2000. The driver ought to be updated to work better in a multi-component model but the mechanical conversion ensures that we avoid blocking PM core work until that happens. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Liam Girdwood <lrg@slimlogic.co.uk>
-
Zeng Zhaoming authored
Add Freescale SGTL5000 codec support. Supported features: - line-in and mic input - headphone and line-out output - line-in bypass ADC and DAC to headphone - 16, 20, 24, 32 bit audio - 8 ~ 96k sample rates Signed-off-by:
Zeng Zhaoming <zhaoming.zeng@freescale.com> Acked-by:
-
Justin P. Mattock authored
The patch below removes an extra "l" in the word. Signed-off-by:
Justin P. Mattock <justinmattock@gmail.com> Acked-by:
Jassi Brar <jassi.brar@samsung.com> Acked-by:
-
Mark Brown authored
-
Stephen Warren authored
The utilities will be required by every machine driver. Including the utility object directly into every machine driver causes a build failure if the modules are actually built into the kernel, since each will define the symbols exported by the utility file. Solve this by moving the utility object into a separate module. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Acked-by:
-
Dimitris Papastamos authored
Sometimes the name of the control switch of a dapm route contains spaces which makes it impossible to distinguish it from the source widget. Add quotes around the names of the widgets to makes these parsable. Signed-off-by:
Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by:
-
Mark Brown authored
Signed-off-by:
-
Dmitry Eremin-Solenikov authored
Correct names for pxa AC97 DAI are pxa2xx-ac97 and pxa2xx-ac97-aux. Fix that for all PXA platforms. Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by:
-
- 24 Feb, 2011 1 commit
-
-
Mark Brown authored
We're currently not passing anything and this will make the card and so on more discoverable. Signed-off-by:
-
- 22 Feb, 2011 10 commits
-
-
Mark Brown authored
The default WM8958 jack detection handler implements a full set of buttons and also support for video detection. Support for multi-button jacks is fairly system specific and will usually require some tuning for headsets so simplify the implementation to only report a simple short to ground button, leaving multi-button headsets to be handled by system specific code. Signed-off-by:
-
Mark Brown authored
The WM8958 has a different microphone bias architecture to WM8994 so needs different configuration to WM8994. Support this in platform data. Signed-off-by:
-
Mark Brown authored
Allow direct routing of the WM8958 microphone detection signal to a GPIO to be used, saving the need to demux the interrupt. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
As bias level changes can be quite time consuming and the bias changes for multiple devices aren't strongly tied to each other (if anything it can be advantageous to bring different devices up together) we can improve the state transition time for multi-component systems by running the bias level changes for all the devices in parallel. This is very simple to achieve using the kernel async functionality so use that to schedule the work. This should have no practical effect for the overwhelming majority of systems which have a single DAPM context - we'll bounce into another thread to do the bias level change but otherwise everything will happen in exactly the same order as it did before. Signed-off-by:
-
Mark Brown authored
We can get the card from the DAPM context so don't bother passing it as an argument. Signed-off-by:
-
Mark Brown authored
-
Mark Brown authored
The microphone detection functionality requires a clock to work. In any non-detection case where the MICBIAS is enabled CLK_SYS will be needed anyway so there is no negative impact on power consumption. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
- 18 Feb, 2011 7 commits
-
-
Mark Brown authored
The microphone detection functionality requires a clock to work. In any non-detection case where the MICBIAS is enabled CLK_SYS will be needed anyway so there is no negative impact on power consumption. Signed-off-by: -
Mark Brown authored
So they show up in codec_reg. Signed-off-by: -
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Some systems wish to use jacks as wake sources. Provide a wake flag in the GPIO configuration which causes the driver to enable the IRQ as a wake source. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
The only thing that should ever be calling this is soc-core and that is built as part of the same module so doesn't need the export. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
- 16 Feb, 2011 5 commits
-
-
Vinod Koul authored
Pulseaudio doesnt work with current driver and it was root caused to absense of hw_params function and malloc_pages in it. This patch adds this and allows pa to work fine with these drivers Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Harsha Priya <priya.harsha@intel.com> Acked-by:
-
Vinod Koul authored
This patch removes the old method of soc-audio device creation in mfld machine and makes use of new soc_register_card API to register the card Signed-off-by:
-
Vinod Koul authored
The tlv scale is defined as (min, step, mute). The mute is not supported here so put the value to 0 Signed-off-by:
-
Vinod Koul authored
This patch makes the DMIC dynamically connect to TX Mux, earlier code had erroneously made this as static path Signed-off-by:
-
Vinod Koul authored
This patch makes the codec playback rails (headset and speaker) depend on actual pins they control. This enables better power management of the codec Signed-off-by:
-
- 13 Feb, 2011 9 commits
-
-
Mark Brown authored
-
Mark Brown authored
The WM8903 interrupts are clear on read so if the WM8903 detection is enabled from platform data when the IRQ is in use (rather than using a direct signal from a GPIO) status may be lost during startup. Help users spot this misconfiguration by adding a WARN_ON(). Signed-off-by:
-
Stephen Warren authored
With the appropriate MODULE_ALIAS in place, the audio modules will be automatically loaded; there is no longer a need for manual modprobes. Signed-off-by:
-
Stephen Warren authored
Harmony has both an external mic (a regular mic jack) and an internal mic (a 0.1" two-pin header on the board). The external mic is connected to the WM8903's IN1L pin, and is supported by the current driver. The internal mic is connected to the WM8903's IN1R pin, and is not supported by the current driver. It appears that no Harmony systems were shipped with any internal mic connected; users were expected to provide their own. This makes the internal mic connection less interesting. The WM8903's Mic Bias signal is used for both of these mics. For each mic, a GPIO drives a transistor which gates whether the mic bias signal is actively connected to that mic, or isolated from it. The dual use of the mic bias for both mics makes a general-purpose complete implementation of mic detection using the mic bias complex. So, for simplicity, the internal mic is currently ignored by the driver. This patch configures the relevant GPIOs to enable the mic bias connection to the external mic, and disable the mic bias connection to the internal mic. Note that in practice, this is the default state if these GPIOs aren't configured. Signed-off-by:
-
Stephen Warren authored
Signed-off-by:
-
Stephen Warren authored
* Add jack definition for mic jack * Request wm8903 to enable mic detection * Force mic bias on, since it's required for mic detection Signed-off-by:
-
Mark Brown authored
If a widget has been force enabled then not only do we need to keep the widget itself enabled, we also need to keep any supplies the widget requires enabled. The user could force all the individual widgets on but this requires too much knowledge of device internals. Signed-off-by:
-
Dimitris Papastamos authored
On WM8994 revision D and earlier ensure proper playback robustness as some rare use cases can trigger issues. Signed-off-by:
-
Dimitris Papastamos authored
Ensure that on disabling certain registers such as AIF1DAC1L, AIF1DAC1R etc. the AIF1CLK and AIF2CLK remain enabled. Similarly when enabling those registers, AIF1CLK and AIF2CLK will remain disabled. Signed-off-by:
-
