- 07 Jan, 2011 40 commits
-
-
Lee, Chun-Yi authored
Add 3G rfkill sysfs file for provide userland to control 3G device on/off by using WMI method. Signed-off-by:
Lee, Chun-Yi <jlee@novell.com> Acked-by:
Thomas Renninger <trenn@suse.de> Acked-by:
Jiri Benc <jbenc@suse.cz> Acked-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
Carlos Corbaho <carlos@strangeworlds.co.uk> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Lee, Chun-Yi authored
Add acer wmi hotkey event support. Install a wmi notify handler to transfer wmi event key to key code, then send out keycode through acer wmi input device to userland. Signed-off-by:
-
Sedat Dilek authored
With 'make oldnoconfig' I see these warnings in linux-next (next-20101208): drivers/platform/x86/Kconfig:422:error: recursive dependency detected! drivers/platform/x86/Kconfig:422: symbol EEEPC_WMI depends on ACPI_WMI drivers/platform/x86/Kconfig:438: symbol ACPI_WMI is selected by ACER_WMI drivers/platform/x86/Kconfig:18: symbol ACER_WMI depends on LEDS_CLASS drivers/leds/Kconfig:10: symbol LEDS_CLASS is selected by EEEPC_WMI This patch replaces all "select on ACPI_WMI" by "depends on ACPI_WMI". Quote from David Woodhouse: "A better policy is: "NEVER USE SELECT"." Reported-and-tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Ike Panhc authored
Passing ideapad_priv as argument and try not to using too much global variable. This is part 2 for rfkill. Signed-off-by:
Ike Panhc <ike.pan@canonical.com> Signed-off-by:
-
Ike Panhc authored
Passing ideapad_priv as argument and try not to using too much global variable. This is part 1 for platform driver and input device. Signed-off-by:
-
Ike Panhc authored
1. Add markups on init and exit functions 2. Unify the comments in the same style 3. Return result when module initial Signed-off-by:
-
Ike Panhc authored
Hotkey enabled by this patch: Fn+F3: Video mode switch Fn+F5: software rfkill for wifi For some ideapad when push Fn+F3, hardware generates Super-P keys, those key will not be enabled by this patch. Thanks for Dave Hansen report the problem. If CONFIG_INPUT_SPARSEKMAP is not set, when building, you will have error message: ERROR: "sparse_keymap_setup" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "sparse_keymap_free" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "sparse_keymap_report_event" [drivers/platform/x86/ideapad-laptop.ko] undefined! To select INPUT_SPARSEKMAP solve this issue. Ref: http://lkml.org/lkml/2010/12/2/340Signed-off-by:
-
Ike Panhc authored
The entry was at /sys/devices/LNXSYSTM:00/../VPC2004:00/camera_power move to /sys/devices/platform/ideapad/camera_power Add document about usage of ideapad node in sysfs. Signed-off-by:
-
Ike Panhc authored
Create /sys/devices/platform/ideapad for nodes of ideapad landing. Signed-off-by:
-
Namhyung Kim authored
Annotate pnp_ids as '__used' to fix following warning: CC drivers/platform/x86/fujitsu-laptop.o drivers/platform/x86/fujitsu-laptop.c:1243: warning: ‘pnp_ids’ defined but not used Signed-off-by:
Namhyung Kim <namhyung@gmail.com> Signed-off-by:
-
Dan Carpenter authored
The break resets the retval to 0 but we want to return an error code. This was introduced in c64eefd4 "WMI: embed struct device directly into wmi_block" Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Corentin Chary authored
If legacy device (SB.ATKD - ASUS010) used by eeepc-laptop is enabled, don't allow eeepc-wmi to load because: - eeepc-laptop may be loaded, and can conflict with eeepc-wmi (they both try to register eeepc::touchpad led for example). - the WMI interface is inteded to be used when the OS is not detected as Win 7. And when this is the case, the ASUS010 device is disabled. Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
-
Corentin Chary authored
Allow te get the current led state in a more accurate way. Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
Since eeepc-wmi has currently no official maintainer, I claim maintainership of this driver, and add it to the acpi4asus project. Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
eeepc-wmi/ - debugfs root directory dev_id - current dev_id ctrl_param - current ctrl_param devs - call DEVS(dev_id, ctrl_param) and print result dsts - call DSTS(dev_id) and print result DEVS and DSTS are the main functions used in eeepc-wmi, this will allow to test new features without patching the drivers. Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
wimax support is missing because I don't have any DSDT with WMI and wimax support. Most of the code comes from eeepc-laptop. Signed-off-by:
-
Corentin Chary authored
Most of the code comes from eeepc-laptop. Signed-off-by:
-
Corentin Chary authored
The old code was using platform_driver.probe to initialize eeepc_wmi context. That's a mistake because if probe fail, eeepc_platform_register() won't tell anyone, and chaos will happen. Wrap add and remove code inside eeepc_wmi_add() / eeepc_wmi_remove(), and try to use the static platform_device only in eeepc_wmi_init() and eeepc_wmi_exit() The code is now very similar to eeepc-laptop, except eeepc_laptop_add and eeepc_laptop_remove are called from acpi_driver, not module init/exit functions, but WMI doesn't provide such functionalities (yet ?). Signed-off-by:
-
Herton Ronaldo Krzesinski authored
Add missing input_sync call in cmpc_keys_handler function. Signed-off-by:
Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
-
Herton Ronaldo Krzesinski authored
We don't need to call bios/acpi (cmpc_set_rfkill_wlan) if the blocked state is already set to the same value (little optimization). This can happen for example if we initialize the module with same initial hardware state (rfkill core always call cmpc_rfkill_block on initialization here). Also GWRI method only accepts 0 or 1 for setting rfkill block, as can be seen on AML code from acpidump->DSDT from a classmate sample I have, so should be fine setting state only to 0 or 1 directly. Signed-off-by:
-
Colin King authored
WMI data blocks can contain WMI events with the same GUID but with different notifiy_ids, for example volume up/down hotkeys. This patch enables a single event handler to be registered and unregistered against all events with same GUID but different notify_ids. Since an event handler is passed the notify_id of an event it can can differentiate between the different events. The patch also ensures we only register and unregister a device per unique GUID. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Sreedhara DS authored
This driver implements ioctl and interfaces with intel scu ipc driver. It is used to access pmic/msic registers from user space and firmware update utility. Signed-off-by:
Sreedhara DS <sreedhara.ds@intel.com> [Extensive clean up and debug] Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits) USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) USB: serial: ftdi_sio: add support for TIOCSERGETLSR USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport USB: atmel_usba_udc: fix freeing irq in usba_udc_remove() usb: ehci-omap: fix tll channel enable mask usb: ohci-omap3: fix trivial typo USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's USB: gadget: update ci13xxx to work with g_ether USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers Revert "USB: musb: pm: don't rely fully on clock support" Revert "USB: musb: blackfin: pm: make it work" USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added ... Manually fix up trivial conflicts in USB Kconfig changes in: arch/arm/mach-omap2/Kconfig arch/sh/Kconfig drivers/usb/Kconfig drivers/usb/host/ehci-hcd.c and annoying chip clock data conflicts in: arch/arm/mach-omap2/clock3xxx_data.c arch/arm/mach-omap2/clock44xx_data.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (147 commits) [SCSI] arcmsr: fix write to device check [SCSI] lpfc: lower stack use in lpfc_fc_frame_check [SCSI] eliminate an unnecessary local variable from scsi_remove_target() [SCSI] libiscsi: use bh locking instead of irq with session lock [SCSI] libiscsi: do not take host lock in queuecommand [SCSI] be2iscsi: fix null ptr when accessing task hdr [SCSI] be2iscsi: fix gfp use in alloc_pdu [SCSI] libiscsi: add more informative failure message during iscsi scsi eh [SCSI] gdth: Add missing call to gdth_ioctl_free [SCSI] bfa: remove unused defintions and misc cleanups [SCSI] bfa: remove inactive functions [SCSI] bfa: replace bfa_assert with WARN_ON [SCSI] qla2xxx: Use sg_next to fetch next sg element while walking sg list. [SCSI] qla2xxx: Fix to avoid recursive lock failure during BSG timeout. [SCSI] qla2xxx: Remove code to not reset ISP82xx on failure. [SCSI] qla2xxx: Display mailbox register 4 during 8012 AEN for ISP82XX parts. [SCSI] qla2xxx: Don't perform a BIG_HAMMER if Get-ID (0x20) mailbox command fails on CNAs. [SCSI] qla2xxx: Remove redundant module parameter permission bits [SCSI] qla2xxx: Add sysfs node for displaying board temperature. [SCSI] qla2xxx: Code cleanup to remove unwanted comments and code. ...
-
Dan Carpenter authored
There was a semi-colon missing and it broke the compile. Signed-off-by:
Linus Walleij <linus.walleij@stericsson.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin * 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin: (57 commits) fs: scale mntget/mntput fs: rename vfsmount counter helpers fs: implement faster dentry memcmp fs: prefetch inode data in dcache lookup fs: improve scalability of pseudo filesystems fs: dcache per-inode inode alias locking fs: dcache per-bucket dcache hash locking bit_spinlock: add required includes kernel: add bl_list xfs: provide simple rcu-walk ACL implementation btrfs: provide simple rcu-walk ACL implementation ext2,3,4: provide simple rcu-walk ACL implementation fs: provide simple rcu-walk generic_check_acl implementation fs: provide rcu-walk aware permission i_ops fs: rcu-walk aware d_revalidate method fs: cache optimise dentry and inode for rcu-walk fs: dcache reduce branches in lookup path fs: dcache remove d_mounted fs: fs_struct use seqlock fs: rcu-walk for path lookup ...
-
Nick Piggin authored
The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by:Nick Piggin <npiggin@kernel.dk>
-
Nick Piggin authored
Suggested by Andreas, mnt_ prefix is clearer namespace, follows kernel conventions better, and is easier for tab complete. I introduced these names so I'll admit they were not good choices. Signed-off-by: -
Nick Piggin authored
The standard memcmp function on a Westmere system shows up hot in profiles in the `git diff` workload (both parallel and single threaded), and it is likely due to the costs associated with trapping into microcode, and little opportunity to improve memory access (dentry name is not likely to take up more than a cacheline). So replace it with an open-coded byte comparison. This increases code size by 8 bytes in the critical __d_lookup_rcu function, but the speedup is huge, averaging 10 runs of each: git diff st user sys elapsed CPU before 1.15 2.57 3.82 97.1 after 1.14 2.35 3.61 96.8 git diff mt user sys elapsed CPU before 1.27 3.85 1.46 349 after 1.26 3.54 1.43 333 Elapsed time for single threaded git diff at 95.0% confidence: -0.21 +/- 0.01 -5.45% +/- 0.24% It's -0.66% +/- 0.06% elapsed time on my Opteron, so rep cmp costs on the fam10h seem to be relatively smaller, but there is still a win. Signed-off-by: -
Nick Piggin authored
This makes single threaded git diff -1.25% +/- 0.05% elapsed time on my 2s12c24t Westmere system, and -0.86% +/- 0.05% on my 2s8c Barcelona, by prefetching the important first cacheline of the inode in while we do the actual name compare and other operations on the dentry. There was no measurable slowdown in the single file stat case, or the creat case (where negative dentries would be common). Signed-off-by: -
Nick Piggin authored
Regardless of how much we possibly try to scale dcache, there is likely always going to be some fundamental contention when adding or removing children under the same parent. Pseudo filesystems do not seem need to have connected dentries because by definition they are disconnected. Signed-off-by: -
Nick Piggin authored
dcache_inode_lock can be replaced with per-inode locking. Use existing inode->i_lock for this. This is slightly non-trivial because we sometimes need to find the inode from the dentry, which requires d_inode to be stabilised (either with refcount or d_lock). Signed-off-by: -
Nick Piggin authored
We can turn the dcache hash locking from a global dcache_hash_lock into per-bucket locking. Signed-off-by: -
Nick Piggin authored
Signed-off-by: -
Nick Piggin authored
Introduce a type of hlist that can support the use of the lowest bit in the hlist_head. This will be subsequently used to implement per-bucket bit spinlock for inode and dentry hashes, and may be useful in other cases such as network hashes. Reviewed-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Nick Piggin authored
This simple implementation just checks for no ACLs on the inode, and if so, then the rcu-walk may proceed, otherwise fail it. Signed-off-by:
-
