- 18 Jun, 2019 28 commits
-
-
Paolo Bonzini authored
vmx->loaded_cpu_state can only be NULL or equal to vmx->loaded_vmcs, so change it to a bool. Because the direction of the bool is now the opposite of vmx->guest_msrs_dirty, change the direction of vmx->guest_msrs_dirty so that they match. Finally, do not imply that MSRs have to be reloaded when vmx->guest_state_loaded is false; instead, set vmx->guest_msrs_ready to false explicitly in vmx_prepare_switch_to_host. Cc: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Emulation of GUEST_PML_INDEX for a nested VMM is a bit weird. Because L0 flushes the PML on every VM-Exit, the value in vmcs02 at the time of VM-Enter is a constant -1, regardless of what L1 thinks/wants. Fixes: 09abe320 ("KVM: nVMX: split pieces of prepare_vmcs02() to prepare_vmcs02_early()") Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Sean Christopherson authored
KVM doesn't yet support SGX virtualization, i.e. writes a constant value to ENCLS_EXITING_BITMAP so that it can intercept ENCLS and inject a #UD. Fixes: 0b665d30 ("KVM: vmx: Inject #UD for SGX ENCLS instruction in guest") Signed-off-by:
-
Sean Christopherson authored
If L1 does not set VM_ENTRY_LOAD_BNDCFGS, then L1's BNDCFGS value must be propagated to vmcs02 since KVM always runs with VM_ENTRY_LOAD_BNDCFGS when MPX is supported. Because the value effectively comes from vmcs01, vmcs02 must be updated even if vmcs12 is clean. Fixes: 62cf9bd8 ("KVM: nVMX: Fix emulation of VM_ENTRY_LOAD_BNDCFGS") Cc: stable@vger.kernel.org Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by:
-
Sean Christopherson authored
The behavior of WRMSR is in no way dependent on whether or not KVM consumes the value. Fixes: 4566654b ("KVM: vmx: Inject #GP on invalid PAT CR") Cc: stable@vger.kernel.org Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by:
-
Paolo Bonzini authored
These function do not prepare the entire state of the vmcs02, only the rarely needed parts. Rename them to make this clearer. Reviewed-by:
-
Sean Christopherson authored
Many guest fields are rarely read (or written) by VMMs, i.e. likely aren't accessed between runs of a nested VMCS. Delay pulling rarely accessed guest fields from vmcs02 until they are VMREAD or until vmcs12 is dirtied. The latter case is necessary because nested VM-Entry will consume all manner of fields when vmcs12 is dirty, e.g. for consistency checks. Note, an alternative to synchronizing all guest fields on VMREAD would be to read *only* the field being accessed, but switching VMCS pointers is expensive and odds are good if one guest field is being accessed then others will soon follow, or that vmcs12 will be dirtied due to a VMWRITE (see above). And the full synchronization results in slightly cleaner code. Note, although GUEST_PDPTRs are relevant only for a 32-bit PAE guest, they are accessed quite frequently for said guests, and a separate patch is in flight to optimize away GUEST_PDTPR synchronziation for non-PAE guests. Skipping rarely accessed guest fields reduces the latency of a nested VM-Exit by ~200 cycles. Signed-off-by:
-
Sean Christopherson authored
So that future optimizations related to shadowed fields don't need to define their own switch statement. Add a BUILD_BUG_ON() to ensure at least one of the types (RW vs RO) is defined when including vmcs_shadow_fields.h (guess who keeps mistyping SHADOW_FIELD_RO as SHADOW_FIELD_R0). Signed-off-by:
-
Sean Christopherson authored
Nested virtualization involves copying data between many different types of VMCSes, e.g. vmcs02, vmcs12, shadow VMCS and eVMCS. Rename a variety of functions and flags to document both the source and destination of each sync. Signed-off-by:
-
Sean Christopherson authored
... to make it more obvious that sync_vmcs12() is invoked on all nested VM-Exits, e.g. hiding sync_vmcs12() in prepare_vmcs12() makes it appear that guest state is NOT propagated to vmcs12 for a normal VM-Exit. Signed-off-by:
-
Sean Christopherson authored
The vmcs12 fields offsets are constant and known at compile time. Store the associated offset for each shadowed field to avoid the costly lookup in vmcs_field_to_offset() when copying between vmcs12 and the shadow VMCS. Avoiding the costly lookup reduces the latency of copying by ~100 cycles in each direction. Signed-off-by:
-
Sean Christopherson authored
VMMs frequently read the guest's CS and SS AR bytes to detect 64-bit mode and CPL respectively, but effectively never write said fields once the VM is initialized. Intercepting VMWRITEs for the two fields saves ~55 cycles in copy_shadow_to_vmcs12(). Because some Intel CPUs, e.g. Haswell, drop the reserved bits of the guest access rights fields on VMWRITE, exposing the fields to L1 for VMREAD but not VMWRITE leads to inconsistent behavior between L1 and L2. On hardware that drops the bits, L1 will see the stripped down value due to reading the value from hardware, while L2 will see the full original value as stored by KVM. To avoid such an inconsistency, emulate the behavior on all CPUS, but only for intercepted VMWRITEs so as to avoid introducing pointless latency into copy_shadow_to_vmcs12(), e.g. if the emulation were added to vmcs12_write_any(). Since the AR_BYTES emulation is done only for intercepted VMWRITE, if a future patch (re)exposed AR_BYTES for both VMWRITE and VMREAD, then KVM would end up with incosistent behavior on pre-Haswell hardware, e.g. KVM would drop the reserved bits on intercepted VMWRITE, but direct VMWRITE to the shadow VMCS would not drop the bits. Add a WARN in the shadow field initialization to detect any attempt to expose an AR_BYTES field without updating vmcs12_write_any(). Note, emulation of the AR_BYTES reserved bit behavior is based on a patch[1] from Jim Mattson that applied the emulation to all writes to vmcs12 so that live migration across different generations of hardware would not introduce divergent behavior. But given that live migration of nested state has already been enabled, that ship has sailed (not to mention that no sane VMM will be affected by this behavior). [1] https://patchwork.kernel.org/patch/10483321/ Cc: Jim Mattson <jmattson@google.com> Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by:
-
Sean Christopherson authored
Allowing L1 to VMWRITE read-only fields is only beneficial in a double nesting scenario, e.g. no sane VMM will VMWRITE VM_EXIT_REASON in normal non-nested operation. Intercepting RO fields means KVM doesn't need to sync them from the shadow VMCS to vmcs12 when running L2. The obvious downside is that L1 will VM-Exit more often when running L3, but it's likely safe to assume most folks would happily sacrifice a bit of L3 performance, which may not even be noticeable in the grande scheme, to improve L2 performance across the board. Not intercepting fields tagged read-only also allows for additional optimizations, e.g. marking GUEST_{CS,SS}_AR_BYTES as SHADOW_FIELD_RO since those fields are rarely written by a VMMs, but read frequently. When utilizing a shadow VMCS with asymmetric R/W and R/O bitmaps, fields that cause VM-Exit on VMWRITE but not VMREAD need to be propagated to the shadow VMCS during VMWRITE emulation, otherwise a subsequence VMREAD from L1 will consume a stale value. Note, KVM currently utilizes asymmetric bitmaps when "VMWRITE any field" is not exposed to L1, but only so that it can reject the VMWRITE, i.e. propagating the VMWRITE to the shadow VMCS is a new requirement, not a bug fix. Eliminating the copying of RO fields reduces the latency of nested VM-Entry (copy_shadow_to_vmcs12()) by ~100 cycles (plus 40-50 cycles if/when the AR_BYTES fields are exposed RO). Signed-off-by: -
Sean Christopherson authored
Per commit 1b6269db ("KVM: VMX: Handle NMIs before enabling interrupts and preemption"), NMIs are handled directly in vmx_vcpu_run() to "make sure we handle NMI on the current cpu, and that we don't service maskable interrupts before non-maskable ones". The other exceptions handled by complete_atomic_exit(), e.g. async #PF and #MC, have similar requirements, and are located there to avoid extra VMREADs since VMX bins hardware exceptions and NMIs into a single exit reason. Clean up the code and eliminate the vaguely named complete_atomic_exit() by moving the interrupts-disabled exception and NMI handling into the existing handle_external_intrs() callback, and rename the callback to a more appropriate name. Rename VMexit handlers throughout so that the atomic and non-atomic counterparts have similar names. In addition to improving code readability, this also ensures the NMI handler is run with the host's debug registers loaded in the unlikely event that the user is debugging NMIs. Accuracy of the last_guest_tsc field is also improved when handling NMIs (and #MCs) as the handler will run after updating said field. Signed-off-by:
-
Sean Christopherson authored
VMX can conditionally call kvm_{before,after}_interrupt() since KVM always uses "ack interrupt on exit" and therefore explicitly handles interrupts as opposed to blindly enabling irqs. Signed-off-by: -
Sean Christopherson authored
Although the kernel may use multiple IDTs, KVM should only ever see the "real" IDT, e.g. the early init IDT is long gone by the time KVM runs and the debug stack IDT is only used for small windows of time in very specific flows. Before commit a547c6db ("KVM: VMX: Enable acknowledge interupt on vmexit"), the kernel's IDT base was consumed by KVM only when setting constant VMCS state, i.e. to set VMCS.HOST_IDTR_BASE. Because constant host state is done once per vCPU, there was ostensibly no need to cache the kernel's IDT base. When support for "ack interrupt on exit" was introduced, KVM added a second consumer of the IDT base as handling already-acked interrupts requires directly calling the interrupt handler, i.e. KVM uses the IDT base to find the address of the handler. Because interrupts are a fast path, KVM cached the IDT base to avoid having to VMREAD HOST_IDTR_BASE. Presumably, the IDT base was cached on a per-vCPU basis simply because the existing code grabbed the IDT base on a per-vCPU (VMCS) basis. Note, all post-boot IDTs use the same handlers for external interrupts, i.e. the "ack interrupt on exit" use of the IDT base would be unaffected even if the cached IDT somehow did not match the current IDT. And as for the original use case of setting VMCS.HOST_IDTR_BASE, if any of the above analysis is wrong then KVM has had a bug since the beginning of time since KVM has effectively been caching the IDT at vCPU creation since commit a8b732ca01c ("[PATCH] kvm: userspace interface"). Signed-off-by:
-
Sean Christopherson authored
Generic x86 code invokes the kvm_x86_ops external interrupt handler on all VM-Exits regardless of the actual exit type. Use the already-cached EXIT_REASON to determine if the VM-Exit was due to an interrupt, thus avoiding an extra VMREAD (to query VM_EXIT_INTR_INFO) for all other types of VM-Exit. In addition to avoiding the extra VMREAD, checking the EXIT_REASON instead of VM_EXIT_INTR_INFO makes it more obvious that vmx_handle_external_intr() is called for all VM-Exits, e.g. someone unfamiliar with the flow might wonder under what condition(s) VM_EXIT_INTR_INFO does not contain a valid interrupt, which is simply not possible since KVM always runs with "ack interrupt on exit". WARN once if VM_EXIT_INTR_INFO doesn't contain a valid interrupt on an EXTERNAL_INTERRUPT VM-Exit, as such a condition would indicate a hardware bug. Signed-off-by:
-
Paolo Bonzini authored
The reason for skipping handling of NMI and #MC in handle_exception is the same, namely they are handled earlier by vmx_complete_atomic_exit. Calling the machine check handler (which just returns 1) is misleading, don't do it. Signed-off-by: -
Sean Christopherson authored
A previous fix to prevent KVM from consuming stale VMCS state after a failed VM-Entry inadvertantly blocked KVM's handling of machine checks that occur during VM-Entry. Per Intel's SDM, a #MC during VM-Entry is handled in one of three ways, depending on when the #MC is recognoized. As it pertains to this bug fix, the third case explicitly states EXIT_REASON_MCE_DURING_VMENTRY is handled like any other VM-Exit during VM-Entry, i.e. sets bit 31 to indicate the VM-Entry failed. If a machine-check event occurs during a VM entry, one of the following occurs: - The machine-check event is handled as if it occurred before the VM entry: ... - The machine-check event is handled after VM entry completes: ... - A VM-entry failure occurs as described in Section 26.7. The basic exit reason is 41, for "VM-entry failure due to machine-check event". Explicitly handle EXIT_REASON_MCE_DURING_VMENTRY as a one-off case in vmx_vcpu_run() instead of binning it into vmx_complete_atomic_exit(). Doing so allows vmx_vcpu_run() to handle VMX_EXIT_REASONS_FAILED_VMENTRY in a sane fashion and also simplifies vmx_complete_atomic_exit() since VMCS.VM_EXIT_INTR_INFO is guaranteed to be fresh. Fixes: b060ca3b ("kvm: vmx: Handle VMLAUNCH/VMRESUME failure properly") Cc: stable@vger.kernel.org Signed-off-by:Jim Mattson <jmattson@google.com> Signed-off-by:
-
Paolo Bonzini authored
Make it available to AMD hosts as well, just in case someone is trying to use an Intel processor's CPUID setup. Suggested-by:
-
Wei Yang authored
In function apic_mmio_write(), the offset has been checked in: * apic_mmio_in_range() * offset & 0xf These two ensures offset is in range [0x010, 0xff0]. Signed-off-by:
Wei Yang <richardw.yang@linux.intel.com> Signed-off-by:
-
Wei Yang authored
apic_clear_vector() is the counterpart of kvm_lapic_set_vector(), while they have different naming convention. Rename it and move together to arch/x86/kvm/lapic.h. Also fix one typo in comment by hand. Signed-off-by:
-
Wei Yang authored
On delivering irq to apic, we iterate on vcpu and do the check like this: kvm_apic_present(vcpu) kvm_lapic_enabled(vpu) kvm_apic_present(vcpu) && kvm_apic_sw_enabled(vcpu->arch.apic) Since we have already checked kvm_apic_present(), it is reasonable to replace kvm_lapic_enabled() with kvm_apic_sw_enabled(). Signed-off-by: -
Marcelo Tosatti authored
Add an MSRs which allows the guest to disable host polling (specifically the cpuidle-haltpoll, when performing polling in the guest, disables host side polling). Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Eugene Korenevsky authored
There is an imperfection in get_vmx_mem_address(): access length is ignored when checking the limit. To fix this, pass access length as a function argument. The access length is usually obvious since it is used by callers after get_vmx_mem_address() call, but for vmread/vmwrite it depends on the state of 64-bit mode. Signed-off-by:
Eugene Korenevsky <ekorenevsky@gmail.com> Signed-off-by:
-
Eugene Korenevsky authored
Intel SDM vol. 3, 5.3: The processor causes a general-protection exception (or, if the segment is SS, a stack-fault exception) any time an attempt is made to access the following addresses in a segment: - A byte at an offset greater than the effective limit - A word at an offset greater than the (effective-limit – 1) - A doubleword at an offset greater than the (effective-limit – 3) - A quadword at an offset greater than the (effective-limit – 7) Therefore, the generic limit checking error condition must be exn = (off > limit + 1 - access_len) = (off + access_len - 1 > limit) but not exn = (off + access_len > limit) as for now. Also avoid integer overflow of `off` at 32-bit KVM by casting it to u64. Note: access length is currently sizeof(u64) which is incorrect. This will be fixed in the subsequent patch. Signed-off-by:
-
Like Xu authored
Add support to expose Intel V2 Extended Topology Enumeration Leaf for some new systems with multiple software-visible die within each package. Because unimplemented and unexposed leaves should be explicitly reported as zero, there is no need to limit cpuid.0.eax to the maximum value of feature configuration but limit it to the highest leaf implemented in the current code. A single clamping seems sufficient and cheaper. Co-developed-by:
Xiaoyao Li <xiaoyao.li@linux.intel.com> Signed-off-by:
Like Xu <like.xu@linux.intel.com> Signed-off-by:
-
Liran Alon authored
Make all code consistent with kvm_deliver_exception_payload() by using appropriate symbolic constant instead of hard-coded number. Reviewed-by:
Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by:
Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by:
Liran Alon <liran.alon@oracle.com> Signed-off-by:
-
- 13 Jun, 2019 1 commit
-
-
Paolo Bonzini authored
Even when asynchronous page fault is disabled, KVM does not want to pause the host if a guest triggers a page fault; instead it will put it into an artificial HLT state that allows running other host processes while allowing interrupt delivery into the guest. However, the way this feature is triggered is a bit confusing. First, it is not used for page faults while a nested guest is running: but this is not an issue since the artificial halt is completely invisible to the guest, either L1 or L2. Second, it is used even if kvm_halt_in_guest() returns true; in this case, the guest probably should not pay the additional latency cost of the artificial halt, and thus we should handle the page fault in a completely synchronous way. By introducing a new function kvm_can_deliver_async_pf, this patch commonizes the code that chooses whether to deliver an async page fault (kvm_arch_async_page_not_present) and the code that chooses whether a page fault should be handled synchronously (kvm_can_do_async_pf). Signed-off-by:
-
- 05 Jun, 2019 7 commits
-
-
Junaid Shahid authored
It doesn't seem as if there is any particular need for kvm_lock to be a spinlock, so convert the lock to a mutex so that sleepable functions (in particular cond_resched()) can be called while holding it. Signed-off-by:
Junaid Shahid <junaids@google.com> Signed-off-by:
-
Uros Bizjak authored
__vmcs_writel uses volatile asm, so there is no need to insert another one between the first and the second call to __vmcs_writel in order to prevent unwanted code moves for 32bit targets. Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> Signed-off-by:
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Jan Beulich authored
While upstream gcc doesn't detect conflicts on cc (yet), it really should, and hence "cc" should not be specified for asm()-s also having "=@cc<cond>" outputs. (It is quite pointless anyway to specify a "cc" clobber in x86 inline assembly, since the compiler assumes it to be always clobbered, and has no means [yet] to suppress this behavior.) Signed-off-by:
Jan Beulich <jbeulich@suse.com> Fixes: bbc0b823 ("KVM: nVMX: Capture VM-Fail via CC_{SET,OUT} in nested early checks") Reviewed-by:
-
Andrew Jones authored
This is the same as vm_vcpu_add_default, but it also takes a kvm_vcpu_init struct pointer. Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
-
Andrew Jones authored
This allows aarch64 tests to run on more targets, such as the Arm simulator that doesn't like KVM_ARM_TARGET_GENERIC_V8. And it also allows aarch64 tests to provide vcpu features in struct kvm_vcpu_init. Additionally it drops the unused memslot parameters. Signed-off-by:
-
Paolo Bonzini authored
This removes the processor-dependent arguments from vm_vcpu_add. Signed-off-by:
-
- 04 Jun, 2019 4 commits
-
-
Andrew Jones authored
Make sure we complete the I/O after determining we have a ucall, which is I/O. Also allow the *uc parameter to optionally be NULL. It's quite possible that a test case will only care about the return value, like for example when looping on a check for UCALL_DONE. Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
-
Wanpeng Li authored
MSR IA32_MISC_ENABLE bit 18, according to SDM: | When this bit is set to 0, the MONITOR feature flag is not set (CPUID.01H:ECX[bit 3] = 0). | This indicates that MONITOR/MWAIT are not supported. | | Software attempts to execute MONITOR/MWAIT will cause #UD when this bit is 0. | | When this bit is set to 1 (default), MONITOR/MWAIT are supported (CPUID.01H:ECX[bit 3] = 1). The CPUID.01H:ECX[bit 3] ought to mirror the value of the MSR bit, CPUID.01H:ECX[bit 3] is a better guard than kvm_mwait_in_guest(). kvm_mwait_in_guest() affects the behavior of MONITOR/MWAIT, not its guest visibility. This patch implements toggling of the CPUID bit based on guest writes to the MSR. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> [Fixes for backwards compatibility - Paolo] Signed-off-by:
-
Wanpeng Li authored
Allow guest reads CORE cstate when exposing host CPU power management capabilities to the guest. PKG cstate is restricted to avoid a guest to get the whole package information in multi-tenant scenario. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by:
-
Wanpeng Li authored
Commit b31c114b (KVM: X86: Provide a capability to disable PAUSE intercepts) forgot to add the KVM_X86_DISABLE_EXITS_PAUSE into api doc. This patch adds it. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by:
-
