- 14 Dec, 2017 38 commits
-
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_set_sregs(). Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_get_sregs(). Signed-off-by:
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_set_regs(). Signed-off-by:
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_get_regs(). Signed-off-by:
-
Christoffer Dall authored
Move vcpu_load() and vcpu_put() into the architecture specific implementations of kvm_arch_vcpu_ioctl_run(). Signed-off-by:
-
Christoffer Dall authored
In preparation for moving calls to vcpu_load() and vcpu_put() into the architecture specific implementations of the KVM vcpu ioctls, move the calls in the main kvm_vcpu_ioctl() dispatcher function to each case of the ioctl select statement. This allows us to move the vcpu_load() and vcpu_put() calls into architecture specific implementations of vcpu ioctls, one by one. Reviewed-by:
-
Christoffer Dall authored
As we're about to call vcpu_load() from architecture-specific implementations of the KVM vcpu ioctls, but yet we access data structures protected by the vcpu->mutex in the generic code, factor this logic out from vcpu_load(). x86 is the only architecture which calls vcpu_load() outside of the main vcpu ioctl function, and these calls will no longer take the vcpu mutex following this patch. However, with the exception of kvm_arch_vcpu_postcreate (see below), the callers are either in the creation or destruction path of the VCPU, which means there cannot be any concurrent access to the data structure, because the file descriptor is not yet accessible, or is already gone. kvm_arch_vcpu_postcreate makes the newly created vcpu potentially accessible by other in-kernel threads through the kvm->vcpus array, and we therefore take the vcpu mutex in this case directly. Signed-off-by:
-
Quan Xu authored
Since KVM removes the only I/O port 0x80 bypass on Intel hosts, clear CPU_BASED_USE_IO_BITMAPS and set CPU_BASED_UNCOND_IO_EXITING bit. Then these I/O permission bitmaps are not used at all, so drop I/O permission bitmaps. Signed-off-by:
Jim Mattson <jmattson@google.com> Signed-off-by: Radim KrÄmáÅ
™ <rkrcmar@redhat.com> Signed-off-by:Quan Xu <quan.xu0@gmail.com> Signed-off-by:
-
Wanpeng Li authored
When I run ebizzy in a 32 vCPUs guest on a 32 pCPUs Xeon box, I can observe ~8000 kvm_wait_lapic_expire CurAvg/s through kvm_stat tool even if the advance tscdeadline hrtimer expiration is disabled. Each call to wait_lapic_expire() will consume ~70 cycles when a timer fires since apic_timer_expire() will set expired_tscdeadline and then wait_lapic_expire() will do some caculation before bailing out. So total ~175us per second is lost on this 3.2Ghz machine. This patch reduces the overhead by skipping the function wait_lapic_expire() when lapic_timer_advance is disabled. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
-
Wanpeng Li authored
MSR_IA32_DEBUGCTLMSR is zeroed on VMEXIT, so it is saved/restored each time during world switch. This patch caches the host IA32_DEBUGCTL MSR and saves/restores the host IA32_DEBUGCTL msr when guest/host switches to avoid to save/restore each time during world switch. This saves about 100 clock cycles per vmexit. Suggested-by:
Radim Krčmář <rkrcmar@redhat.com>
-
Mark Kanda authored
When attempting to free a loaded VMCS02, add a WARN and avoid freeing it (to avoid use-after-free situations). Suggested-by:
Mark Kanda <mark.kanda@oracle.com> Reviewed-by:
Ameya More <ameya.more@oracle.com> Reviewed-by:
Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by:
-
Jim Mattson authored
The potential performance advantages of a vmcs02 pool have never been realized. To simplify the code, eliminate the pool. Instead, a single vmcs02 is allocated per VCPU when the VCPU enters VMX operation. Signed-off-by:
-
Yang Zhong authored
Intel IceLake cpu has added new cpu features,AVX512_VBMI2/GFNI/ VAES/VPCLMULQDQ/AVX512_VNNI/AVX512_BITALG. Those new cpu features need expose to guest VM. The bit definition: CPUID.(EAX=7,ECX=0):ECX[bit 06] AVX512_VBMI2 CPUID.(EAX=7,ECX=0):ECX[bit 08] GFNI CPUID.(EAX=7,ECX=0):ECX[bit 09] VAES CPUID.(EAX=7,ECX=0):ECX[bit 10] VPCLMULQDQ CPUID.(EAX=7,ECX=0):ECX[bit 11] AVX512_VNNI CPUID.(EAX=7,ECX=0):ECX[bit 12] AVX512_BITALG The release document ref below link: https://software.intel.com/sites/default/files/managed/c5/15/\ architecture-instruction-set-extensions-programming-reference.pdf The kernel dependency commit in kvm.git: (c128dbfa) Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Signed-off-by:
-
Markus Elfring authored
Add a jump target so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Liran Alon authored
This MSR returns the number of #SMIs that occurred on CPU since boot. It was seen to be used frequently by ESXi guest. Patch adds a new vcpu-arch specific var called smi_count to save the number of #SMIs which occurred on CPU since boot. It is exposed as a read-only MSR to guest (causing #GP on wrmsr) in RDMSR/WRMSR emulation code. MSR_SMI_COUNT is also added to emulated_msrs[] to make sure user-space can save/restore it for migration purposes. Signed-off-by:
Liran Alon <liran.alon@oracle.com> Suggested-by:
Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by:
Bhavesh Davda <bhavesh.davda@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by:
-
Radim Krčmář authored
If Intel/AMD implements MWAIT, we expect that it works well and only reject known bugs; no reason to do it the other way around for minor vendors. (Not that they are relevant ATM.) This allows further simplification of kvm_mwait_in_guest(). And use boot_cpu_has() instead of "cpu_has(&boot_cpu_data," while at it. Reviewed-by:
Alexander Graf <agraf@suse.de> Acked-by:
Borislav Petkov <bp@suse.de> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Radim Krčmář authored
The check was added in some iteration while trying to fix a reported OS X on Core 2 bug, but that bug is elsewhere. The comment is misleading because the guest can call MWAIT with ECX = 0 even if we enforce CPUID5_ECX_INTERRUPT_BREAK; the call would have the exactly the same effect as if the host didn't have the feature. A problem is that a QEMU feature exposes CPUID5_ECX_INTERRUPT_BREAK on CPUs that do not support it. Removing the check changes behavior on last Pentium 4 lines (Presler, Dempsey, and Tulsa, which had VMX and MONITOR while missing INTERRUPT_BREAK) when running a guest OS that uses MWAIT without checking for its presence (QEMU doesn't expose MONITOR). The only known OS that ignores the MONITOR flag is old Mac OS X and we allowed it to bug on Core 2 (MWAIT used to throw #UD and only that OS noticed), so we can save another 20 lines letting it bug on even older CPUs. Alternatively, we can return MWAIT exiting by default and let userspace toggle it. Reviewed-by:
-
Radim Krčmář authored
The bug prevents MWAIT from waking up after a write to the monitored cache line. KVM might emulate a CPU model that shouldn't have the bug, so the guest would not employ a workaround and possibly miss wakeups. Better to avoid the situation. Reviewed-by:
-
Colin Ian King authored
The array audit_point_name is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: arch/x86/kvm/mmu_audit.c:22:12: warning: symbol 'audit_point_name' was not declared. Should it be static? Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Gimcuan Hui authored
The kvm_mmu_clear_all_pte_masks interface is only used by kvm_mmu_module_init locally, and does not need to be called by other module, make it static. This patch cleans up sparse warning: symbol 'kvm_mmu_clear_all_pte_masks' was not declared. Should it be static? Signed-off-by:
Gimcuan Hui <gimcuan@gmail.com> Reviewed-by:
-
Paolo Bonzini authored
This is encoded as F3 0F C7 /7 with a register argument. The register argument is the second array in the group9 GroupDual, while F3 is the fourth element of a Prefix. Reviewed-by:
-
Paolo Bonzini authored
UMIP can be emulated almost perfectly on Intel processor by enabling descriptor-table exits. SMSW does not cause a vmexit and hence it cannot be changed into a #GP fault, but all in all it's the most "innocuous" of the unprivileged instructions that UMIP blocks. In fact, Linux is _also_ emulating SMSW instructions on behalf of the program that executes them, because some 16-bit programs expect to use SMSW to detect vm86 mode, so this is an even smaller issue. Reviewed-by:
-
Paolo Bonzini authored
The User-Mode Instruction Prevention feature present in recent Intel processor prevents a group of instructions (sgdt, sidt, sldt, smsw, and str) from being executed with CPL > 0. Otherwise, a general protection fault is issued. UMIP instructions in general are also able to trigger vmexits, so we can actually emulate UMIP on older processors. This commit sets up the infrastructure so that kvm-intel.ko and kvm-amd.ko can set the UMIP feature bit for CPUID even if the feature is not actually available in hardware. Reviewed-by:
-
Paolo Bonzini authored
These are needed to handle the descriptor table vmexits when emulating UMIP. Reviewed-by:
-
Paolo Bonzini authored
Add the CPUID bits, make the CR4.UMIP bit not reserved anymore, and add UMIP support for instructions that are already emulated by KVM. Reviewed-by:
-
Stefan Raspl authored
Add a line for the total number of events and current average at the bottom of the body. Note that both values exclude child trace events. I.e. if drilldown is activated via interactive command 'x', only the totals are accounted, or we'd be counting these twice (see previous commit "tools/kvm_stat: fix child trace events accounting"). Signed-off-by:
Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by:
-
Stefan Raspl authored
Unhandled arguments, which could easily include typos, are simply ignored. We should be strict to avoid undetected typos. To reproduce start kvm_stat with an extra argument, e.g. 'kvm_stat -d bnuh5ol' and note that this will actually work. Signed-off-by:
-
Stefan Raspl authored
Errors while parsing the '-g' command line argument result in display of usage information prior to the error message. This is a bit confusing, as the command line is syntactically correct. To reproduce, run 'kvm_stat -g' and specify a non-existing or inactive guest. Signed-off-by:
-
Stefan Raspl authored
Passing an invalid regular expression on the command line results in a traceback. Note that interactive specification of invalid regular expressions is not affected To reproduce, run "kvm_stat -f '*'". Signed-off-by:
-
Stefan Raspl authored
The man page update for this new functionality was omitted. Signed-off-by:
-
Stefan Raspl authored
Child trace events were included in calculation of the overall total, which is used for calculation of the percentages of the '%Total' column. However, the parent trace envents' stats summarize the child trace events, hence we'd incorrectly account for them twice, leading to slightly wrong stats. With this fix, we use the correct total. Consequently, the sum of the child trace events' '%Total' column values is identical to the respective value of the respective parent event. However, this also means that the sum of the '%Total' column values will aggregate to more than 100 percent. Signed-off-by:
-
Stefan Raspl authored
Commit 67fbcd62 ("tools/kvm_stat: add '-f help' to get the available event list") added support for '-f help'. However, the extra handling of 'help' will also take effect when 'help' is specified as a regex in interactive mode via 'f'. This results in display of all events while only those matching this regex should be shown. Signed-off-by:
-
Stefan Raspl authored
When updating the fields filter, tracepoint events of fields previously not visible were not enabled, as TracepointProvider.update_fields() updated the member variable directly instead of using the setter, which triggers the event enable/disable. To reproduce, run 'kvm_stat -f kvm_exit', press 'c' to remove the filter, and notice that no add'l fields that do not match the regex 'kvm_exit' will appear. This issue was introduced by commit c469117d ("tools/kvm_stat: simplify initializers"). Signed-off-by:
-
Stefan Raspl authored
When displaying debugfs events listed by guests, an attempt to switch to reporting of stats for individual child trace events results in garbled output. Reason is that when toggling drilldown, the update of the stats doesn't honor when events are displayed by guests, as indicated by Tui._display_guests. To reproduce, run 'kvm_stat -d' and press 'b' followed by 'x'. Signed-off-by:
-
Stefan Raspl authored
Specifying a guest via '-g foo' always results in an error: $ kvm_stat -g foo Usage: kvm_stat [options] kvm_stat: error: Error while searching for guest "foo", use "-p" to specify a pid instead Reason is that Tui.get_pid_from_gname() is not static, as it is supposed to be. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Peter Xu authored
------------[ cut here ]------------ Bad FPU state detected at kvm_put_guest_fpu+0xd8/0x2d0 [kvm], reinitializing FPU registers. WARNING: CPU: 1 PID: 4594 at arch/x86/mm/extable.c:103 ex_handler_fprestore+0x88/0x90 CPU: 1 PID: 4594 Comm: qemu-system-x86 Tainted: G B OE 4.15.0-rc2+ #10 RIP: 0010:ex_handler_fprestore+0x88/0x90 Call Trace: fixup_exception+0x4e/0x60 do_general_protection+0xff/0x270 general_protection+0x22/0x30 RIP: 0010:kvm_put_guest_fpu+0xd8/0x2d0 [kvm] RSP: 0018:ffff8803d5627810 EFLAGS: 00010246 kvm_vcpu_reset+0x3b4/0x3c0 [kvm] kvm_apic_accept_events+0x1c0/0x240 [kvm] kvm_arch_vcpu_ioctl_run+0x1658/0x2fb0 [kvm] kvm_vcpu_ioctl+0x479/0x880 [kvm] do_vfs_ioctl+0x142/0x9a0 SyS_ioctl+0x74/0x80 do_syscall_64+0x15f/0x600 where kvm_put_guest_fpu is called without a prior kvm_load_guest_fpu. To fix it, move kvm_load_guest_fpu to the very beginning of kvm_arch_vcpu_ioctl_run. Cc: stable@vger.kernel.org Fixes: f775b13eSigned-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
-
Wanpeng Li authored
*** Guest State *** CR0: actual=0x0000000000000030, shadow=0x0000000060000010, gh_mask=fffffffffffffff7 CR4: actual=0x0000000000002050, shadow=0x0000000000000000, gh_mask=ffffffffffffe871 CR3 = 0x00000000fffbc000 RSP = 0x0000000000000000 RIP = 0x0000000000000000 RFLAGS=0x00000000 DR7 = 0x0000000000000400 ^^^^^^^^^^ The failed vmentry is triggered by the following testcase when ept=Y: #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[5]; int main() { r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); struct kvm_regs regs = { .rflags = 0, }; ioctl(r[4], KVM_SET_REGS, ®s); ioctl(r[4], KVM_RUN, 0); } X86 RFLAGS bit 1 is fixed set, userspace can simply clearing bit 1 of RFLAGS with KVM_SET_REGS ioctl which results in vmentry fails. This patch fixes it by oring X86_EFLAGS_FIXED during ioctl. Cc: stable@vger.kernel.org Suggested-by: -
Wanpeng Li authored
The below test case can cause infinite loop in kvm when ept=0. #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[5]; int main() { r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); ioctl(r[4], KVM_RUN, 0); } It doesn't setup the memory regions, mmu_alloc_shadow/direct_roots() in kvm return 1 when kvm fails to allocate root page table which can result in beblow infinite loop: vcpu_run() { for (;;) { r = vcpu_enter_guest()::kvm_mmu_reload() returns 1 if (r <= 0) break; if (need_resched()) cond_resched(); } } This patch fixes it by returning -ENOSPC when there is no available kvm mmu page for root page table. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Fixes: 26eeb53c (KVM: MMU: Bail out immediately if there is no available mmu page) Signed-off-by:
-
- 11 Dec, 2017 1 commit
-
-
Linus Torvalds authored
-
- 10 Dec, 2017 1 commit
-
-
Jeff Layton authored
HPFS does not set SB_I_VERSION and does not use the i_version counter internally. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Mikulas Patocka <mikulas@twibright.com> Reviewed-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
