- 04 Feb, 2008 6 commits
-
-
Thomas Gleixner authored
In split_large_page we clear the NX bit for the new split ptes, but we need to preserve the original setting of it for the split ptes. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Florian Fainelli authored
The mach-rdc321x uses the leds-gpio driver and explicitely selects it, this driver also depends on the leds class module, select it as well. Signed-off-by:
Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by:
-
Sam Ravnborg authored
The module scx200 were renamed to scx200_32 by the merge of the 32 and 64 bit x86 arch trees. Keep the _32 prefix on the .c file as it is 32 bit specific and fix the module name in the Makefile. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Sam Ravnborg authored
The apm module were renamed to apm_32 during the merge of 32 and 64 bit x86 which is unfortunate. As apm is 32 bit specific we like to keep the _32 in the filename but the module should be named apm. Fix this in the Makefile. Reported-by:
"A.E.Lawrence" <lawrence_a_e@ntlworld.com> Signed-off-by:
-
Ingo Molnar authored
Jeff Chua bisected down a vmware guest boot breakage (hang) to this paravirt change: commit 8d947344 Author: Glauber de Oliveira Costa <gcosta@redhat.com> Date: Wed Jan 30 13:31:12 2008 +0100 x86: change write_idt_entry signature fix the off-by-one indexing bug ... Bisected-by:
Jeff Chua <jeff.chua.linux@gmail.com> Tested-by:
-
Ingo Molnar authored
Kevin Winchester reported the loss of direct rendering, due to: [ 0.588184] agpgart: Detected AGP bridge 0 [ 0.588184] agpgart: unable to get memory for graphics translation table. [ 0.588184] agpgart: agp_backend_initialize() failed. [ 0.588207] agpgart-amd64: probe of 0000:00:00.0 failed with error -12 and bisected it down to: commit 266b9f87 Author: Thomas Gleixner <tglx@linutronix.de> Date: Wed Jan 30 13:34:06 2008 +0100 x86: fix ioremap RAM check this check was too strict and caused an ioremap() failure. the problem is due to the somewhat unclean way of how the GART code reserves a memory range for its aperture, and how it utilizes it later on. Allow RAM pages to be ioremap()-ed too, as long as they are reserved. Bisected-by:
Kevin Winchester <kjwinchester@gmail.com> Signed-off-by:
-
- 02 Feb, 2008 34 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (95 commits) ide-tape: remove idetape_config_t typedef ide-tape: remove mtio.h related comments ide-tape: make function name more accurate ide-tape: remove unused sense packet commands. ide-tape: use generic byteorder macros ide-tape: remove EXPERIMENTAL driver status ide-tape: use generic scsi commands ide-tape: remove struct idetape_block_size_page_t ide-tape: remove structs os_partition_t, os_dat_entry_t, os_dat_t ide-tape: remove struct idetape_parameter_block_descriptor_t ide-tape: remove struct idetape_medium_partition_page_t ide-tape: remove struct idetape_data_compression_page_t ide-tape: remove struct idetape_inquiry_result_t ide-tape: remove struct idetape_capabilities_page_t ide-tape: remove IDETAPE_DEBUG_BUGS ide-tape: remove IDETAPE_DEBUG_INFO ide-tape: dump gcw fields on error in idetape_identify_device() ide-tape: remove struct idetape_mode_parameter_header_t ide-tape: remove struct idetape_request_sense_result_t ide-tape: remove dead code ...
-
Nick Piggin authored
Frederik Himpe reported an unkillable and un-straceable pan process. Zero length iovecs can go into an infinite loop in writev, because the iovec iterator does not always advance over them. The sequence required to trigger this is not trivial. I think it requires that a zero-length iovec be followed by a non-zero-length iovec which causes a pagefault in the atomic usercopy. This causes the writev code to drop back into single-segment copy mode, which then tries to copy the 0 bytes of the zero-length iovec; a zero length copy looks like a failure though, so it loops. Put a test into iov_iter_advance to catch zero-length iovecs. We could just put the test in the fallback path, but I feel it is more robust to skip over zero-length iovecs throughout the code (iovec iterator may be used in filesystems too, so it should be robust). Signed-off-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: sbp2: fix bogus s/g access change
-
Borislav Petkov authored
Since this is used only in idetape_blkdev_ioctl(), remove the typedef and make the struct function-local. Bart: - s/sizeof(struct idetape_config)/sizeof(config)/ Signed-off-by:
Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Borislav Petkov authored
Those are already in mtio.h. Bart: - undo 'unsigned int/unsigned long' -> 'uint/ulong' conversion Signed-off-by:
-
Borislav Petkov authored
idetape_active_next_stage() was rather ambiguous wrt its purpose. Make that more explicit and remove superfluous comment. Signed-off-by:
-
Borislav Petkov authored
Signed-off-by:
-
Borislav Petkov authored
This is not a network driver. Signed-off-by:
-
Borislav Petkov authored
ide-tape has depended on EXPERIMENTAL for ages. Change that since the driver is being only maintained now. Signed-off-by:
-
Borislav Petkov authored
Also, remove those which weren't used. Signed-off-by:
-
Borislav Petkov authored
Signed-off-by:
-
Borislav Petkov authored
They seem just to sit there completely unused. Signed-off-by:
-
Borislav Petkov authored
Also, shorten function name idetape_get_blocksize_from_block_descriptor() and move its definition up thereby getting rid of its forward declaration. Signed-off-by:
-
Borislav Petkov authored
There should be no functional changes resulting from this patch. Signed-off-by:
-
Borislav Petkov authored
There should be no functional changes resulting from this patch. Signed-off-by:
-
Borislav Petkov authored
There should be no functional changes resulting from this patch. Signed-off-by:
-
Borislav Petkov authored
All those 2-byte values denoting the different capabilities are being written to the local copy of the caps buffer without being converted to big endian for simplicity of usage and shorter code later. Also, we add some comments stating which are the fields of the caps page in question in order to alleviate the cryptic pointer casting exercises as in e.g. idetape_get_mode_sense_results(). There should be no functional changes resulting from this patch. Bart: - remove two needless "!!" Signed-off-by:
-
Borislav Petkov authored
Signed-off-by:
-
Borislav Petkov authored
The device capabilities are probed for during device initialization so this info is available through proc/ioctl() und it is redundant here. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Cc: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: -
Borislav Petkov authored
Bart: - remove 'capabilities->speed' chunk - re-add brackets to block_descrp assignment Signed-off-by:
-
Borislav Petkov authored
Bart: - remove unnecessary comment change - remove two needless "!!" Signed-off-by:
-
Borislav Petkov authored
Signed-off-by:
-
Borislav Petkov authored
Also, cleanup whitespace and update comments. Bart: - remove reference to drivers/block/ide.c - move driver documentation to Documentation/ide/ide-tape.txt Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
No reason to use ide_init_hwif_ports() in ide-cs (as a nice side-effect this makes ide-cs work on archs that don't define IDE_ARCH_OBSOLETE_INIT). Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Move check_dma_crc() to ide-dma.c and add inline version for CONFIG_BLK_DEV_IDEDMA=n case. * Rename check_dma_crc() to ide_check_dma_crc(). Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
While at it: * Remove needless '!drive->crc_count' check. Acked-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Acked-by:
-
Bartlomiej Zolnierkiewicz authored
SELECT_DRIVE() is called by IDE core code in start_request() before device driver's ->do_request method. In ide-scsi case ->do_request is implemented by idescsi_do_request() which is also the only user of idescsi_issue_pc(). Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Use __ide_set_handler() in ide_execute_command(). While at it: * Fix whitespace damage in ide_execute_command(). Acked-by:
-
Bartlomiej Zolnierkiewicz authored
* siimage.c: use hwif->sata_scr[SATA_{ERROR,STATUS}_OFFSET] instead of SATA_{ERROR,STATUS}_REG macros. * Remove no longer needed SATA_*_REG macros. While at it: * Remove needless SATA Status register read from sil_sata_reset_poll(). Signed-off-by:
-
