- 12 Aug, 2020 8 commits
-
-
Joonsoo Kim authored
In current implementation, newly created or swap-in anonymous page is started on active list. Growing active list results in rebalancing active/inactive list so old pages on active list are demoted to inactive list. Hence, the page on active list isn't protected at all. Following is an example of this situation. Assume that 50 hot pages on active list. Numbers denote the number of pages on active/inactive list (active | inactive). 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(uo) | 50(h) 3. workload: another 50 newly created (used-once) pages 50(uo) | 50(uo), swap-out 50(h) This patch tries to fix this issue. Like as file LRU, newly created or swap-in anonymous pages will be inserted to the inactive list. They are promoted to active list if enough reference happens. This simple modification changes the above example as following. 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(h) | 50(uo) 3. workload: another 50 newly created (used-once) pages 50(h) | 50(uo), swap-out 50(uo) As you can see, hot pages on active list would be protected. Note that, this implementation has a drawback that the page cannot be promoted and will be swapped-out if re-access interval is greater than the size of inactive list but less than the size of total(active+inactive). To solve this potential issue, following patch will apply workingset detection similar to the one that's already applied to file LRU. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Link: http://lkml.kernel.org/r/1595490560-15117-3-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joonsoo Kim authored
Patch series "workingset protection/detection on the anonymous LRU list", v7. * PROBLEM In current implementation, newly created or swap-in anonymous page is started on the active list. Growing the active list results in rebalancing active/inactive list so old pages on the active list are demoted to the inactive list. Hence, hot page on the active list isn't protected at all. Following is an example of this situation. Assume that 50 hot pages on active list and system can contain total 100 pages. Numbers denote the number of pages on active/inactive list (active | inactive). (h) stands for hot pages and (uo) stands for used-once pages. 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(uo) | 50(h) 3. workload: another 50 newly created (used-once) pages 50(uo) | 50(uo), swap-out 50(h) As we can see, hot pages are swapped-out and it would cause swap-in later. * SOLUTION Since this is what we want to avoid, this patchset implements workingset protection. Like as the file LRU list, newly created or swap-in anonymous page is started on the inactive list. Also, like as the file LRU list, if enough reference happens, the page will be promoted. This simple modification changes the above example as following. 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (used-once) pages 50(h) | 50(uo) 3. workload: another 50 newly created (used-once) pages 50(h) | 50(uo), swap-out 50(uo) hot pages remains in the active list. :) * EXPERIMENT I tested this scenario on my test bed and confirmed that this problem happens on current implementation. I also checked that it is fixed by this patchset. * SUBJECT workingset detection * PROBLEM Later part of the patchset implements the workingset detection for the anonymous LRU list. There is a corner case that workingset protection could cause thrashing. If we can avoid thrashing by workingset detection, we can get the better performance. Following is an example of thrashing due to the workingset protection. 1. 50 hot pages on active list 50(h) | 0 2. workload: 50 newly created (will be hot) pages 50(h) | 50(wh) 3. workload: another 50 newly created (used-once) pages 50(h) | 50(uo), swap-out 50(wh) 4. workload: 50 (will be hot) pages 50(h) | 50(wh), swap-in 50(wh) 5. workload: another 50 newly created (used-once) pages 50(h) | 50(uo), swap-out 50(wh) 6. repeat 4, 5 Without workingset detection, this kind of workload cannot be promoted and thrashing happens forever. * SOLUTION Therefore, this patchset implements workingset detection. All the infrastructure for workingset detecion is already implemented, so there is not much work to do. First, extend workingset detection code to deal with the anonymous LRU list. Then, make swap cache handles the exceptional value for the shadow entry. Lastly, install/retrieve the shadow value into/from the swap cache and check the refault distance. * EXPERIMENT I made a test program to imitates above scenario and confirmed that problem exists. Then, I checked that this patchset fixes it. My test setup is a virtual machine with 8 cpus and 6100MB memory. But, the amount of the memory that the test program can use is about 280 MB. This is because the system uses large ram-backed swap and large ramdisk to capture the trace. Test scenario is like as below. 1. allocate cold memory (512MB) 2. allocate hot-1 memory (96MB) 3. activate hot-1 memory (96MB) 4. allocate another hot-2 memory (96MB) 5. access cold memory (128MB) 6. access hot-2 memory (96MB) 7. repeat 5, 6 Since hot-1 memory (96MB) is on the active list, the inactive list can contains roughly 190MB pages. hot-2 memory's re-access interval (96+128 MB) is more 190MB, so it cannot be promoted without workingset detection and swap-in/out happens repeatedly. With this patchset, workingset detection works and promotion happens. Therefore, swap-in/out occurs less. Here is the result. (average of 5 runs) type swap-in swap-out base 863240 989945 patch 681565 809273 As we can see, patched kernel do less swap-in/out. * OVERALL TEST (ebizzy using modified random function) ebizzy is the test program that main thread allocates lots of memory and child threads access them randomly during the given times. Swap-in will happen if allocated memory is larger than the system memory. The random function that represents the zipf distribution is used to make hot/cold memory. Hot/cold ratio is controlled by the parameter. If the parameter is high, hot memory is accessed much larger than cold one. If the parameter is low, the number of access on each memory would be similar. I uses various parameters in order to show the effect of patchset on various hot/cold ratio workload. My test setup is a virtual machine with 8 cpus, 1024 MB memory and 5120 MB ram swap. Result format is as following. param: 1-1024-0.1 - 1 (number of thread) - 1024 (allocated memory size, MB) - 0.1 (zipf distribution alpha, 0.1 works like as roughly uniform random, 1.3 works like as small portion of memory is hot and the others are cold) pswpin: smaller is better std: standard deviation improvement: negative is better * single thread param pswpin std improvement base 1-1024.0-0.1 14101983.40 79441.19 prot 1-1024.0-0.1 14065875.80 136413.01 ( -0.26 ) detect 1-1024.0-0.1 13910435.60 100804.82 ( -1.36 ) base 1-1024.0-0.7 7998368.80 43469.32 prot 1-1024.0-0.7 7622245.80 88318.74 ( -4.70 ) detect 1-1024.0-0.7 7618515.20 59742.07 ( -4.75 ) base 1-1024.0-1.3 1017400.80 38756.30 prot 1-1024.0-1.3 940464.60 29310.69 ( -7.56 ) detect 1-1024.0-1.3 945511.40 24579.52 ( -7.07 ) base 1-1280.0-0.1 22895541.40 50016.08 prot 1-1280.0-0.1 22860305.40 51952.37 ( -0.15 ) detect 1-1280.0-0.1 22705565.20 93380.35 ( -0.83 ) base 1-1280.0-0.7 13717645.60 46250.65 prot 1-1280.0-0.7 12935355.80 64754.43 ( -5.70 ) detect 1-1280.0-0.7 13040232.00 63304.00 ( -4.94 ) base 1-1280.0-1.3 1654251.40 4159.68 prot 1-1280.0-1.3 1522680.60 33673.50 ( -7.95 ) detect 1-1280.0-1.3 1599207.00 70327.89 ( -3.33 ) base 1-1536.0-0.1 31621775.40 31156.28 prot 1-1536.0-0.1 31540355.20 62241.36 ( -0.26 ) detect 1-1536.0-0.1 31420056.00 123831.27 ( -0.64 ) base 1-1536.0-0.7 19620760.60 60937.60 prot 1-1536.0-0.7 18337839.60 56102.58 ( -6.54 ) detect 1-1536.0-0.7 18599128.00 75289.48 ( -5.21 ) base 1-1536.0-1.3 2378142.40 20994.43 prot 1-1536.0-1.3 2166260.60 48455.46 ( -8.91 ) detect 1-1536.0-1.3 2183762.20 16883.24 ( -8.17 ) base 1-1792.0-0.1 40259714.80 90750.70 prot 1-1792.0-0.1 40053917.20 64509.47 ( -0.51 ) detect 1-1792.0-0.1 39949736.40 104989.64 ( -0.77 ) base 1-1792.0-0.7 25704884.40 69429.68 prot 1-1792.0-0.7 23937389.00 79945.60 ( -6.88 ) detect 1-1792.0-0.7 24271902.00 35044.30 ( -5.57 ) base 1-1792.0-1.3 3129497.00 32731.86 prot 1-1792.0-1.3 2796994.40 19017.26 ( -10.62 ) detect 1-1792.0-1.3 2886840.40 33938.82 ( -7.75 ) base 1-2048.0-0.1 48746924.40 50863.88 prot 1-2048.0-0.1 48631954.40 24537.30 ( -0.24 ) detect 1-2048.0-0.1 48509419.80 27085.34 ( -0.49 ) base 1-2048.0-0.7 32046424.40 78624.22 prot 1-2048.0-0.7 29764182.20 86002.26 ( -7.12 ) detect 1-2048.0-0.7 30250315.80 101282.14 ( -5.60 ) base 1-2048.0-1.3 3916723.60 24048.55 prot 1-2048.0-1.3 3490781.60 33292.61 ( -10.87 ) detect 1-2048.0-1.3 3585002.20 44942.04 ( -8.47 ) * multi thread param pswpin std improvement base 8-1024.0-0.1 16219822.60 329474.01 prot 8-1024.0-0.1 15959494.00 654597.45 ( -1.61 ) detect 8-1024.0-0.1 15773790.80 502275.25 ( -2.75 ) base 8-1024.0-0.7 9174107.80 537619.33 prot 8-1024.0-0.7 8571915.00 385230.08 ( -6.56 ) detect 8-1024.0-0.7 8489484.20 364683.00 ( -7.46 ) base 8-1024.0-1.3 1108495.60 83555.98 prot 8-1024.0-1.3 1038906.20 63465.20 ( -6.28 ) detect 8-1024.0-1.3 941817.80 32648.80 ( -15.04 ) base 8-1280.0-0.1 25776114.20 450480.45 prot 8-1280.0-0.1 25430847.00 465627.07 ( -1.34 ) detect 8-1280.0-0.1 25282555.00 465666.55 ( -1.91 ) base 8-1280.0-0.7 15218968.00 702007.69 prot 8-1280.0-0.7 13957947.80 492643.86 ( -8.29 ) detect 8-1280.0-0.7 14158331.20 238656.02 ( -6.97 ) base 8-1280.0-1.3 1792482.80 30512.90 prot 8-1280.0-1.3 1577686.40 34002.62 ( -11.98 ) detect 8-1280.0-1.3 1556133.00 22944.79 ( -13.19 ) base 8-1536.0-0.1 33923761.40 575455.85 prot 8-1536.0-0.1 32715766.20 300633.51 ( -3.56 ) detect 8-1536.0-0.1 33158477.40 117764.51 ( -2.26 ) base 8-1536.0-0.7 20628907.80 303851.34 prot 8-1536.0-0.7 19329511.20 341719.31 ( -6.30 ) detect 8-1536.0-0.7 20013934.00 385358.66 ( -2.98 ) base 8-1536.0-1.3 2588106.40 130769.20 prot 8-1536.0-1.3 2275222.40 89637.06 ( -12.09 ) detect 8-1536.0-1.3 2365008.40 124412.55 ( -8.62 ) base 8-1792.0-0.1 43328279.20 946469.12 prot 8-1792.0-0.1 41481980.80 525690.89 ( -4.26 ) detect 8-1792.0-0.1 41713944.60 406798.93 ( -3.73 ) base 8-1792.0-0.7 27155647.40 536253.57 prot 8-1792.0-0.7 24989406.80 502734.52 ( -7.98 ) detect 8-1792.0-0.7 25524806.40 263237.87 ( -6.01 ) base 8-1792.0-1.3 3260372.80 137907.92 prot 8-1792.0-1.3 2879187.80 63597.26 ( -11.69 ) detect 8-1792.0-1.3 2892962.20 33229.13 ( -11.27 ) base 8-2048.0-0.1 50583989.80 710121.48 prot 8-2048.0-0.1 49599984.40 228782.42 ( -1.95 ) detect 8-2048.0-0.1 50578596.00 660971.66 ( -0.01 ) base 8-2048.0-0.7 33765479.60 812659.55 prot 8-2048.0-0.7 30767021.20 462907.24 ( -8.88 ) detect 8-2048.0-0.7 32213068.80 211884.24 ( -4.60 ) base 8-2048.0-1.3 3941675.80 28436.45 prot 8-2048.0-1.3 3538742.40 76856.08 ( -10.22 ) detect 8-2048.0-1.3 3579397.80 58630.95 ( -9.19 ) As we can see, all the cases show improvement. Especially, test case with zipf distribution 1.3 show more improvements. It means that if there is a hot/cold tendency in anon pages, this patchset works better. This patch (of 6): Current implementation of LRU management for anonymous page has some problems. Most important one is that it doesn't protect the workingset, that is, pages on the active LRU list. Although, this problem will be fixed in the following patchset, the preparation is required and this patch does it. What following patch does is to implement workingset protection. After the following patchset, newly created or swap-in pages will start their lifetime on the inactive list. If inactive list is too small, there is not enough chance to be referenced and the page cannot become the workingset. In order to provide the newly anonymous or swap-in pages enough chance to be referenced again, this patch makes active/inactive LRU ratio as 1:1. This is just a temporary measure. Later patch in the series introduces workingset detection for anonymous LRU that will be used to better decide if pages should start on the active and inactive list. Afterwards this patch is effectively reverted. Signed-off-by: -
Muchun Song authored
In the reservation routine, we only check whether the cpuset meets the memory allocation requirements. But we ignore the mempolicy of MPOL_BIND case. If someone mmap hugetlb succeeds, but the subsequent memory allocation may fail due to mempolicy restrictions and receives the SIGBUS signal. This can be reproduced by the follow steps. 1) Compile the test case. cd tools/testing/selftests/vm/ gcc map_hugetlb.c -o map_hugetlb 2) Pre-allocate huge pages. Suppose there are 2 numa nodes in the system. Each node will pre-allocate one huge page. echo 2 > /proc/sys/vm/nr_hugepages 3) Run test case(mmap 4MB). We receive the SIGBUS signal. numactl --membind=3D0 ./map_hugetlb 4 With this patch applied, the mmap will fail in the step 3) and throw "mmap: Cannot allocate memory". [akpm@linux-foundation.org: include sched.h for `current'] Reported-by:Jianchao Guo <guojianchao@bytedance.com> Suggested-by:
Michal Hocko <mhocko@kernel.org> Signed-off-by:
Muchun Song <songmuchun@bytedance.com> Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michel Lespinasse <walken@google.com> Cc: Baoquan He <bhe@redhat.com> Link: http://lkml.kernel.org/r/20200728034938.14993-1-songmuchun@bytedance.comSigned-off-by:
-
Roman Gushchin authored
Add a simple test to check the percpu memory accounting. The test creates a cgroup tree with 1000 child cgroups and checks values of memory.current and memory.stat::percpu. Signed-off-by:
Roman Gushchin <guro@fb.com> Signed-off-by:
-
Roman Gushchin authored
Memory cgroups are using large chunks of percpu memory to store vmstat data. Yet this memory is not accounted at all, so in the case when there are many (dying) cgroups, it's not exactly clear where all the memory is. Because the size of memory cgroup internal structures can dramatically exceed the size of object or page which is pinning it in the memory, it's not a good idea to simply ignore it. It actually breaks the isolation between cgroups. Let's account the consumed percpu memory to the parent cgroup. [guro@fb.com: add WARN_ON_ONCE()s, per Johannes] Link: http://lkml.kernel.org/r/20200811170611.GB1507044@carbon.DHCP.thefacebook.comSigned-off-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Dennis Zhou <dennis@kernel.org> Acked-by:
-
Roman Gushchin authored
Percpu memory can represent a noticeable chunk of the total memory consumption, especially on big machines with many CPUs. Let's track percpu memory usage for each memcg and display it in memory.stat. A percpu allocation is usually scattered over multiple pages (and nodes), and can be significantly smaller than a page. So let's add a byte-sized counter on the memcg level: MEMCG_PERCPU_B. Byte-sized vmstat infra created for slabs can be perfectly reused for percpu case. [guro@fb.com: v3] Link: http://lkml.kernel.org/r/20200623184515.4132564-4-guro@fb.comSigned-off-by:
-
Roman Gushchin authored
Percpu memory is becoming more and more widely used by various subsystems, and the total amount of memory controlled by the percpu allocator can make a good part of the total memory. As an example, bpf maps can consume a lot of percpu memory, and they are created by a user. Also, some cgroup internals (e.g. memory controller statistics) can be quite large. On a machine with many CPUs and big number of cgroups they can consume hundreds of megabytes. So the lack of memcg accounting is creating a breach in the memory isolation. Similar to the slab memory, percpu memory should be accounted by default. To implement the perpcu accounting it's possible to take the slab memory accounting as a model to follow. Let's introduce two types of percpu chunks: root and memcg. What makes memcg chunks different is an additional space allocated to store memcg membership information. If __GFP_ACCOUNT is passed on allocation, a memcg chunk should be be used. If it's possible to charge the corresponding size to the target memory cgroup, allocation is performed, and the memcg ownership data is recorded. System-wide allocations are performed using root chunks, so there is no additional memory overhead. To implement a fast reparenting of percpu memory on memcg removal, we don't store mem_cgroup pointers directly: instead we use obj_cgroup API, introduced for slab accounting. [akpm@linux-foundation.org: fix CONFIG_MEMCG_KMEM=n build errors and warning] [akpm@linux-foundation.org: move unreachable code, per Roman] [cuibixuan@huawei.com: mm/percpu: fix 'defined but not used' warning] Link: http://lkml.kernel.org/r/6d41b939-a741-b521-a7a2-e7296ec16219@huawei.comSigned-off-by:
Bixuan Cui <cuibixuan@huawei.com> Signed-off-by:
-
Roman Gushchin authored
Patch series "mm: memcg accounting of percpu memory", v3. This patchset adds percpu memory accounting to memory cgroups. It's based on the rework of the slab controller and reuses concepts and features introduced for the per-object slab accounting. Percpu memory is becoming more and more widely used by various subsystems, and the total amount of memory controlled by the percpu allocator can make a good part of the total memory. As an example, bpf maps can consume a lot of percpu memory, and they are created by a user. Also, some cgroup internals (e.g. memory controller statistics) can be quite large. On a machine with many CPUs and big number of cgroups they can consume hundreds of megabytes. So the lack of memcg accounting is creating a breach in the memory isolation. Similar to the slab memory, percpu memory should be accounted by default. Percpu allocations by their nature are scattered over multiple pages, so they can't be tracked on the per-page basis. So the per-object tracking introduced by the new slab controller is reused. The patchset implements charging of percpu allocations, adds memcg-level statistics, enables accounting for percpu allocations made by memory cgroup internals and provides some basic tests. To implement the accounting of percpu memory without a significant memory and performance overhead the following approach is used: all accounted allocations are placed into a separate percpu chunk (or chunks). These chunks are similar to default chunks, except that they do have an attached vector of pointers to obj_cgroup objects, which is big enough to save a pointer for each allocated object. On the allocation, if the allocation has to be accounted (__GFP_ACCOUNT is passed, the allocating process belongs to a non-root memory cgroup, etc), the memory cgroup is getting charged and if the maximum limit is not exceeded the allocation is performed using a memcg-aware chunk. Otherwise -ENOMEM is returned or the allocation is forced over the limit, depending on gfp (as any other kernel memory allocation). The memory cgroup information is saved in the obj_cgroup vector at the corresponding offset. On the release time the memcg information is restored from the vector and the cgroup is getting uncharged. Unaccounted allocations (at this point the absolute majority of all percpu allocations) are performed in the old way, so no additional overhead is expected. To avoid pinning dying memory cgroups by outstanding allocations, obj_cgroup API is used instead of directly saving memory cgroup pointers. obj_cgroup is basically a pointer to a memory cgroup with a standalone reference counter. The trick is that it can be atomically swapped to point at the parent cgroup, so that the original memory cgroup can be released prior to all objects, which has been charged to it. Because all charges and statistics are fully recursive, it's perfectly correct to uncharge the parent cgroup instead. This scheme is used in the slab memory accounting, and percpu memory can just follow the scheme. This patch (of 5): To implement accounting of percpu memory we need the information about the size of freed object. Return it from pcpu_free_area(). Signed-off-by:
-
- 11 Aug, 2020 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull perf tools updates from Arnaldo Carvalho de Melo: "New features: - Introduce controlling how 'perf stat' and 'perf record' works via a control file descriptor, allowing starting with events configured but disabled until commands are received via the control file descriptor. This allows, for instance for tools such as Intel VTune to make further use of perf as its Linux platform driver. - Improve 'perf record' to to register in a perf.data file header the clockid used to help later correlate things like syslog files and perf events recorded. - Add basic syscall and find_next_bit benchmarks to 'perf bench'. - Allow using computed metrics in calculating other metrics. For instance: { .metric_expr = "l2_rqsts.demand_data_rd_hit + l2_rqsts.pf_hit + l2_rqsts.rfo_hit", .metric_name = "DCache_L2_All_Hits", }, { .metric_expr = "max(l2_rqsts.all_demand_data_rd - l2_rqsts.demand_data_rd_hit, 0) + l2_rqsts.pf_miss + l2_rqsts.rfo_miss", .metric_name = "DCache_L2_All_Miss", }, { .metric_expr = "dcache_l2_all_hits + dcache_l2_all_miss", .metric_name = "DCache_L2_All", } - Add suport for 'd_ratio', '>' and '<' operators to the expression resolver used in calculating metrics in 'perf stat'. Support for new kernel features: - Support TEXT_POKE and KSYMBOL_TYPE_OOL perf metadata events to cope with things like ftrace, trampolines, i.e. changes in the kernel text that gets in the way of properly decoding Intel PT hardware traces, for instance. Intel PT: - Add various knobs to reduce the volume of Intel PT traces by reducing the level of details such as decoding just some types of packets (e.g., FUP/TIP, PSB+), also filtering by time range. - Add new itrace options (log flags to the 'd' option, error flags to the 'e' one, etc), controlling how Intel PT is transformed into perf events, document some missing options (e.g., how to synthesize callchains). BPF: - Properly report BPF errors when parsing events. - Do not setup side-band events if LIBBPF is not linked, fixing a segfault. Libraries: - Improvements to the libtraceevent plugin mechanism. - Improve libtracevent support for KVM trace events SVM exit reasons. - Add a libtracevent plugins for decoding syscalls/sys_enter_futex and for tlb_flush. - Ensure sample_period is set libpfm4 events in 'perf test'. - Fixup libperf namespacing, to make sure what is in libperf has the perf_ namespace while what is now only in tools/perf/ doesn't use that prefix. Arch specific: - Improve the testing of vendor events and metrics in 'perf test'. - Allow no ARM CoreSight hardware tracer sink to be specified on command line. - Fix arm_spe_x recording when mixed with other perf events. - Add s390 idle functions 'psw_idle' and 'psw_idle_exit' to list of idle symbols. - List kernel supplied event aliases for arm64 in 'perf list'. - Add support for extended register capability in PowerPC 9 and 10. - Added nest IMC power9 metric events. Miscellaneous: - No need to setup sample_regs_intr/sample_regs_user for dummy events. - Update various copies of kernel headers, some causing perf to handle new syscalls, MSRs, etc. - Improve usage of flex and yacc, enabling warnings and addressing the fallout. - Add missing '--output' option to 'perf kmem' so that it can pass it along to 'perf record'. - 'perf probe' fixes related to adding multiple probes on the same address for the same event. - Make 'perf probe' warn if the target function is a GNU indirect function. - Remove //anon mmap events from 'perf inject jit' to fix supporting both using ELF files for generated functions and the perf-PID.map approaches" * tag 'perf-tools-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (144 commits) perf record: Skip side-band event setup if HAVE_LIBBPF_SUPPORT is not set perf tools powerpc: Add support for extended regs in power10 perf tools powerpc: Add support for extended register capability tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools arch x86: Sync asm/cpufeatures.h with the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: update linux/in.h copy tools headers API: Update close_range affected files perf script: Add 'tod' field to display time of day perf script: Change the 'enum perf_output_field' enumerators to be 64 bits perf data: Add support to store time of day in CTF data conversion perf tools: Move clockid_res_ns under clock struct perf header: Store clock references for -k/--clockid option perf tools: Add clockid_name function perf clockid: Move parse_clockid() to new clockid object tools lib traceevent: Handle possible strdup() error in tep_add_plugin_path() API libtraceevent: Fixed description of tep_add_plugin_path() API libtraceevent: Fixed type in PRINT_FMT_STING libtraceevent: Fixed broken indentation in parse_ip4_print_args() libtraceevent: Improve error handling of tep_plugin_add_option() API ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktestLinus Torvalds authored
Pull ktest updates from Steven Rostedt: - Have config-bisect save the good/bad configs at each step. - Show log file location even on success - Add PRE_TEST_DIE to kill test if the PRE_TEST fails - Add a NOT operator for conditionals in config file - Add the log output of the last test when emailing on failure. - Other minor clean ups and small fixes. * tag 'ktest-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest.pl: Fix spelling mistake "Cant" -> "Can't" ktest.pl: Change the logic to control the size of the log file emailed ktest.pl: Add MAIL_MAX_SIZE to limit the amount of log emailed ktest.pl: Add the log of last test in email on failure ktest.pl: Turn off buffering to the log file ktest.pl: Just open up the log file once ktest.pl: Add a NOT operator ktest.pl: Define PRE_TEST_DIE to kill the test if the PRE_TEST fails ktest.pl: Always show log file location if defined even on success ktest.pl: Have config-bisect save each config used in the bisect
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking updates from Thomas Gleixner: "A set of locking fixes and updates: - Untangle the header spaghetti which causes build failures in various situations caused by the lockdep additions to seqcount to validate that the write side critical sections are non-preemptible. - The seqcount associated lock debug addons which were blocked by the above fallout. seqcount writers contrary to seqlock writers must be externally serialized, which usually happens via locking - except for strict per CPU seqcounts. As the lock is not part of the seqcount, lockdep cannot validate that the lock is held. This new debug mechanism adds the concept of associated locks. sequence count has now lock type variants and corresponding initializers which take a pointer to the associated lock used for writer serialization. If lockdep is enabled the pointer is stored and write_seqcount_begin() has a lockdep assertion to validate that the lock is held. Aside of the type and the initializer no other code changes are required at the seqcount usage sites. The rest of the seqcount API is unchanged and determines the type at compile time with the help of _Generic which is possible now that the minimal GCC version has been moved up. Adding this lockdep coverage unearthed a handful of seqcount bugs which have been addressed already independent of this. While generally useful this comes with a Trojan Horse twist: On RT kernels the write side critical section can become preemtible if the writers are serialized by an associated lock, which leads to the well known reader preempts writer livelock. RT prevents this by storing the associated lock pointer independent of lockdep in the seqcount and changing the reader side to block on the lock when a reader detects that a writer is in the write side critical section. - Conversion of seqcount usage sites to associated types and initializers" * tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) locking/seqlock, headers: Untangle the spaghetti monster locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header x86/headers: Remove APIC headers from <asm/smp.h> seqcount: More consistent seqprop names seqcount: Compress SEQCNT_LOCKNAME_ZERO() seqlock: Fold seqcount_LOCKNAME_init() definition seqlock: Fold seqcount_LOCKNAME_t definition seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g hrtimer: Use sequence counter with associated raw spinlock kvm/eventfd: Use sequence counter with associated spinlock userfaultfd: Use sequence counter with associated spinlock NFSv4: Use sequence counter with associated spinlock iocost: Use sequence counter with associated spinlock raid5: Use sequence counter with associated spinlock vfs: Use sequence counter with associated spinlock timekeeping: Use sequence counter with associated raw spinlock xfrm: policy: Use sequence counters with associated lock netfilter: nft_set_rbtree: Use sequence counter with associated rwlock netfilter: conntrack: Use sequence counter with associated spinlock sched: tasks: Use sequence counter with associated spinlock ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "In this round, we've added two small interfaces: (a) GC_URGENT_LOW mode for performance and (b) F2FS_IOC_SEC_TRIM_FILE ioctl for security. The new GC mode allows Android to run some lower priority GCs in background, while new ioctl discards user information without race condition when the account is removed. In addition, some patches were merged to address latency-related issues. We've fixed some compression-related bug fixes as well as edge race conditions. Enhancements: - add GC_URGENT_LOW mode in gc_urgent - introduce F2FS_IOC_SEC_TRIM_FILE ioctl - bypass racy readahead to improve read latencies - shrink node_write lock coverage to avoid long latency Bug fixes: - fix missing compression flag control, i_size, and mount option - fix deadlock between quota writes and checkpoint - remove inode eviction path in synchronous path to avoid deadlock - fix to wait GCed compressed page writeback - fix a kernel panic in f2fs_is_compressed_page - check page dirty status before writeback - wait page writeback before update in node page write flow - fix a race condition between f2fs_write_end_io and f2fs_del_fsync_node_entry We've added some minor sanity checks and refactored trivial code blocks for better readability and debugging information" * tag 'f2fs-for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits) f2fs: prepare a waiter before entering io_schedule f2fs: update_sit_entry: Make the judgment condition of f2fs_bug_on more intuitive f2fs: replace test_and_set/clear_bit() with set/clear_bit() f2fs: make file immutable even if releasing zero compression block f2fs: compress: disable compression mount option if compression is off f2fs: compress: add sanity check during compressed cluster read f2fs: use macro instead of f2fs verity version f2fs: fix deadlock between quota writes and checkpoint f2fs: correct comment of f2fs_exist_written_data f2fs: compress: delay temp page allocation f2fs: compress: fix to update isize when overwriting compressed file f2fs: space related cleanup f2fs: fix use-after-free issue f2fs: Change the type of f2fs_flush_inline_data() to void f2fs: add F2FS_IOC_SEC_TRIM_FILE ioctl f2fs: should avoid inode eviction in synchronous path f2fs: segment.h: delete a duplicated word f2fs: compress: fix to avoid memory leak on cc->cpages f2fs: use generic names for generic ioctls f2fs: don't keep meta inode pages used for compressed block migration ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 updates from Andreas Gruenbacher: - Make sure transactions won't be started recursively in gfs2_block_zero_range (bug introduced in 5.4 when switching to iomap_zero_range) - Fix a glock holder refcount leak introduced in the iopen glock locking scheme rework merged in 5.8. - A few other small improvements (debugging, stack usage, comment fixes). * tag 'gfs2-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: When gfs2_dirty_inode gets a glock error, dump the glock gfs2: Never call gfs2_block_zero_range with an open transaction gfs2: print details on transactions that aren't properly ended gfs2: Fix inaccurate comment fs: Fix typo in comment gfs2: Fix refcount leak in gfs2_glock_poke gfs2: Pass glock holder to gfs2_file_direct_{read,write} gfs2: Add some flags missing from glock output
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifsLinus Torvalds authored
Pull JFFS2, UBI and UBIFS updates from Richard Weinberger: "JFFS2: - Fix for a corner case while mounting - Fix for an use-after-free issue UBI: - Fix for a memory load while attaching - Don't produce an anchor PEB with fastmap being disabled UBIFS: - Fix for orphan inode logic - Spelling fixes - New mount option to specify filesystem version" * tag 'for-linus-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: jffs2: fix UAF problem jffs2: fix jffs2 mounting failure ubifs: Fix wrong orphan node deletion in ubifs_jnl_update|rename ubi: fastmap: Free fastmap next anchor peb during detach ubi: fastmap: Don't produce the initial next anchor PEB when fastmap is disabled ubifs: misc.h: delete a duplicated word ubifs: add option to specify version for new file systems
-
- 10 Aug, 2020 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: - an update to Elan touchpad controller driver supporting newer ICs with enhanced precision reports and a new firmware update process - an update to EXC3000 touch controller supporting additional parts - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: exc3000 - add support to query model and fw_version Input: exc3000 - add reset gpio support Input: exc3000 - add EXC80H60 and EXC80H84 support dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Input: sentelic - fix error return when fsp_reg_write fails Input: alps - remove redundant assignment to variable ret Input: ims-pcu - return error code rather than -ENOMEM Input: elan_i2c - add ic type 0x15 Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Input: uinput - fix typo in function name documentation Input: ati_remote2 - add missing newlines when printing module parameters Input: psmouse - add a newline when printing 'proto' by sysfs Input: synaptics-rmi4 - drop a duplicated word Input: elan_i2c - add support for high resolution reports Input: elan_i2c - do not constantly re-query pattern ID Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14 Input: elan_i2c - handle firmware updated on newer ICs Input: elan_i2c - add support for different firmware page sizes Input: elan_i2c - fix detecting IAP version on older controllers Input: elan_i2c - handle devices with patterns above 1 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: - fix for some modern devices that return multi-byte battery report, from Grant Likely - fix for devices with Resolution Multiplier, from Peter Hutterer - device probing speed increase, from Dmitry Torokhov - ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede - other small assorted fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: quirks: add NOGET quirk for Logitech GROUP HID: Replace HTTP links with HTTPS ones HID: udraw-ps3: Replace HTTP links with HTTPS ones HID: mcp2221: Replace HTTP links with HTTPS ones HID: input: Fix devices that return multiple bytes in battery report HID: lenovo: Fix spurious F23 key press report during resume from suspend HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard fn_lock support HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support HID: lenovo: Rename fn_lock sysfs attr handlers to make them generic HID: lenovo: Factor out generic parts of the LED code HID: lenovo: Merge tpkbd and cptkbd data structures HID: intel-ish-hid: Replace PCI_DEV_FLAGS_NO_D3 with pci_save_state HID: Wiimote: Treat the d-pad as an analogue stick HID: input: do not run GET_REPORT unless there's a Resolution Multiplier HID: usbhid: remove redundant assignment to variable retval HID: usbhid: do not sleep when opening device
-
Colin Ian King authored
There is a spelling mistake in an error message. Fix it. Link: https://lkml.kernel.org/r/20200810100750.61475-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
If the log file for a given test is larger than the max size given then use set the seek from the end of the log file instead of from the start of the test. Signed-off-by: -
Jiri Kosina authored
-
Jiri Kosina authored
- ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede
-
Jiri Kosina authored
-
Jiri Kosina authored
- fix for some modern devices that return multi-byte battery report, from Grant Likely - fix for devices with Resolution Multiplier, from Peter Hutterer - device probing speed increase, from Dmitry Torokhov
-
- 09 Aug, 2020 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull Kbuild updates from Masahiro Yamada: - run the checker (e.g. sparse) after the compiler - remove unneeded cc-option tests for old compiler flags - fix tar-pkg to install dtbs - introduce ccflags-remove-y and asflags-remove-y syntax - allow to trace functions in sub-directories of lib/ - introduce hostprogs-always-y and userprogs-always-y syntax - various Makefile cleanups * tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled kbuild: introduce hostprogs-always-y and userprogs-always-y kbuild: sort hostprogs before passing it to ifneq kbuild: move host .so build rules to scripts/gcc-plugins/Makefile kbuild: Replace HTTP links with HTTPS ones kbuild: trace functions in subdirectories of lib/ kbuild: introduce ccflags-remove-y and asflags-remove-y kbuild: do not export LDFLAGS_vmlinux kbuild: always create directories of targets powerpc/boot: add DTB to 'targets' kbuild: buildtar: add dtbs support kbuild: remove cc-option test of -ffreestanding kbuild: remove cc-option test of -fno-stack-protector Revert "kbuild: Create directory for target DTB" kbuild: run the checker after the compiler
-
git://git.linux-nfs.org/projects/cel/cel-2.6Linus Torvalds authored
Pull NFS server updates from Chuck Lever: "Highlights: - Support for user extended attributes on NFS (RFC 8276) - Further reduce unnecessary NFSv4 delegation recalls Notable fixes: - Fix recent krb5p regression - Address a few resource leaks and a rare NULL dereference Other: - De-duplicate RPC/RDMA error handling and other utility functions - Replace storage and display of kernel memory addresses by tracepoints" * tag 'nfsd-5.9' of git://git.linux-nfs.org/projects/cel/cel-2.6: (38 commits) svcrdma: CM event handler clean up svcrdma: Remove transport reference counting svcrdma: Fix another Receive buffer leak SUNRPC: Refresh the show_rqstp_flags() macro nfsd: netns.h: delete a duplicated word SUNRPC: Fix ("SUNRPC: Add "@len" parameter to gss_unwrap()") nfsd: avoid a NULL dereference in __cld_pipe_upcall() nfsd4: a client's own opens needn't prevent delegations nfsd: Use seq_putc() in two functions svcrdma: Display chunk completion ID when posting a rw_ctxt svcrdma: Record send_ctxt completion ID in trace_svcrdma_post_send() svcrdma: Introduce Send completion IDs svcrdma: Record Receive completion ID in svc_rdma_decode_rqst svcrdma: Introduce Receive completion IDs svcrdma: Introduce infrastructure to support completion IDs svcrdma: Add common XDR encoders for RDMA and Read segments svcrdma: Add common XDR decoders for RDMA and Read segments SUNRPC: Add helpers for decoding list discriminators symbolically svcrdma: Remove declarations for functions long removed svcrdma: Clean up trace_svcrdma_send_failed() tracepoint ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull regset conversion fix from Al Viro: "Fix a regression from an unnoticed bisect hazard in the regset series. A bunch of old (aout, originally) primitives used by coredumps became dead code after fdpic conversion to regsets. Removal of that dead code had been the first commit in the followups to regset series; unfortunately, it happened to hide the bisect hazard on sh (extern for fpregs_get() had not been updated in the main series when it should have been; followup simply made fpregs_get() static). And without that followup commit this bisect hazard became breakage in the mainline" Tested-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kill unused dump_fpu() instances
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control updates from Linus Walleij: "This is the bulk of the pin control changes for the v5.9 kernel series: Core changes: - The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range() macro" was put in an immutable branch and merged into the pinctrl tree as well. We see these changes also here. - Improved debug output for pins used as GPIO. New drivers: - Ocelot Sparx5 SoC driver. - Intel Emmitsburg SoC subdriver. - Intel Tiger Lake-H SoC subdriver. - Qualcomm PM660 SoC subdriver. - Renesas SH-PFC R8A774E1 subdriver. Driver improvements: - Linear improvement and cleanups of the Intel drivers for Cherryview, Lynxpoint, Baytrail etc. Improved locking among other things. - Renesas SH-PFC has added support for RPC pins, groups, and functions to r8a77970 and r8a77980. - The newere Freescale (now NXP) i.MX8 pin controllers have been modularized. This is driven by the Google Android GKI initiative I think. - Open drain support for pins on the Qualcomm IPQ4019. - The Ingenic driver can handle both edges IRQ detection. - A big slew of documentation fixes all over the place. - A few irqchip template conversions by yours truly. * tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits) dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC pinctrl: stmfx: Use irqchip template pinctrl: amd: Use irqchip template pinctrl: mediatek: fix build for tristate changes pinctrl: samsung: Use bank name as irqchip name pinctrl: core: print gpio in pins debugfs file pinctrl: mediatek: add mt6779 eint support pinctrl: mediatek: add pinctrl support for MT6779 SoC pinctrl: mediatek: avoid virtual gpio trying to set reg pinctrl: mediatek: update pinmux definitions for mt6779 pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API pinctrl: mcp23s08: Use irqchip template pinctrl: sx150x: Use irqchip template dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes pinctrl: intel: Add Intel Emmitsburg pin controller support pinctl: ti: iodelay: Replace HTTP links with HTTPS ones Revert "gpio: omap: handle pin config bias flags" pinctrl: single: Use fallthrough pseudo-keyword pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword pinctrl: baytrail: Use fallthrough pseudo-keyword ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull mtd updates from Miquel Raynal: "MTD core changes: - Spelling - http to https updates NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4, TC58NVG0S3E, and TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC SPI NOR core changes: - Disable Quad Mode in spi_nor_restore(). - Don't abort BFPT parsing when QER reserved value is used. - Add support/update capabilities for few flashes. - Drop s70fl01gs flash: it does not support RDSR(05h) which is critical for erase/write. - Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during the release cycle. SPI NOR controller drivers changes: - Move the cadence-quadspi driver to spi-mem. The series was taken through the SPI tree. Merge it also in spi-nor/next to avoid conflicts during the release cycle. - intel-spi: - Add new PCI IDs. - Ignore the Write Disable command, the controller doesn't support it. - Fix performance regression" * tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits) MTD: pfow.h: drop a duplicated word MTD: mtd-abi.h: drop a duplicated word mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones mtd: Replace HTTP links with HTTPS ones mtd: hyperbus: Replace HTTP links with HTTPS ones mtd: revert "spi-nor: intel: provide a range for poll_timout" mtd: spi-nor: update read capabilities for w25q64 and s25fl064k mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g mtd: spi-nor: macronix: Add support for mx66u2g45g mtd: spi-nor: intel-spi: Simulate WRDI command mtd: spi-nor: Disable the flash quad mode in spi_nor_restore() mtd: spi-nor: Add capability to disable flash quad mode mtd: spi-nor: spansion: Remove s70fl01gs from flash_info mtd: spi-nor: sfdp: do not make invalid quad enable fatal dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags mtd: rawnand: stm32_fmc2: get resources from parent node mtd: rawnand: stm32_fmc2: use regmap APIs memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation dt-bindings: mtd: update STM32 FMC2 NAND controller documentation ... -
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Masahiro Yamada authored
Commit d26e9414 ("kbuild: no gcc-plugins during cc-option tests") was neeeded because scripts/Makefile.gcc-plugins was too early. This is unneeded by including scripts/Makefile.gcc-plugins last, and being careful to not add cc-option tests after it. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
Currently, the top Makefile includes all of scripts/Makefile.<feature> even if the associated CONFIG option is disabled. Do not include unneeded Makefiles in order to slightly optimize the parse stage. Include $(include-y), and ignore $(include-). Signed-off-by: -
Masahiro Yamada authored
To build host programs, you need to add the program names to 'hostprogs' to use the necessary build rule, but it is not enough to build them because there is no dependency. There are two types of host programs: built as the prerequisite of another (e.g. gen_crc32table in lib/Makefile), or always built when Kbuild visits the Makefile (e.g. genksyms in scripts/genksyms/Makefile). The latter is typical in Makefiles under scripts/, which contains host programs globally used during the kernel build. To build them, you need to add them to both 'hostprogs' and 'always-y'. This commit adds hostprogs-always-y as a shorthand. The same applies to user programs. net/bpfilter/Makefile builds bpfilter_umh on demand, hence always-y is unneeded. In contrast, programs under samples/ are added to both 'userprogs' and 'always-y' so they are always built when Kbuild visits the Makefiles. userprogs-always-y works as a shorthand. Signed-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
-
Masahiro Yamada authored
The conditional: ifneq ($(hostprogs),) ... is evaluated to true if $(hostprogs) does not contain any word but whitespace characters. ifneq ($(strip $(hostprogs)),) ... is a safe way to avoid interpreting whitespace as a non-empty value, but I'd rather want to use the side-effect of $(sort ...) to do the equivalent. $(sort ...) is used in scripts/Makefile.host in order to drop duplication in $(hostprogs). It is also useful to strip excessive spaces. Move $(sort ...) before evaluating the ifneq. Signed-off-by: -
Masahiro Yamada authored
The host shared library rules are currently implemented in scripts/Makefile.host, but actually GCC-plugin is the only user of them. (The VDSO .so files are built for the target by different build rules) Hence, they do not need to be treewide available. Move all the relevant build rules to scripts/gcc-plugins/Makefile. I also optimized the build steps so *.so is directly built from .c because every upstream plugin is compiled from a single source file. I am still keeping the multi-file plugin support, which Kees Cook mentioned might be needed by out-of-tree plugins. (https://lkml.org/lkml/2019/1/11/1107) If the plugin, foo.so, is compiled from two files foo.c and foo2.c, then you can do like follows: foo-objs := foo.o foo2.o Single-file plugins do not need the *-objs notation. Signed-off-by:
Kees Cook <keescook@chromium.org>
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
Masahiro Yamada authored
ccflags-remove-$(CONFIG_FUNCTION_TRACER) += $(CC_FLAGS_FTRACE) exists here in sub-directories of lib/ to keep the behavior of commit 2464a609 ("ftrace: do not trace library functions"). Since that commit, not only the objects in lib/ but also the ones in the sub-directories are excluded from ftrace (although the commit description did not explicitly mention this). However, most of library functions in sub-directories are not so hot. Re-add them to ftrace. Going forward, only the objects right under lib/ will be excluded. Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Masahiro Yamada authored
CFLAGS_REMOVE_<file>.o filters out flags when compiling a particular object, but there is no convenient way to do that for every object in a directory. Add ccflags-remove-y and asflags-remove-y to make it easily. Use ccflags-remove-y to clean up some Makefiles. The add/remove order works as follows: [1] KBUILD_CFLAGS specifies compiler flags used globally [2] ccflags-y adds compiler flags for all objects in the current Makefile [3] ccflags-remove-y removes compiler flags for all objects in the current Makefile (New feature) [4] CFLAGS_<file> adds compiler flags per file. [5] CFLAGS_REMOVE_<file> removes compiler flags per file. Having [3] before [4] allows us to remove flags from most (but not all) objects in the current Makefile. For example, kernel/trace/Makefile removes $(CC_FLAGS_FTRACE) from all objects in the directory, then adds it back to trace_selftest_dynamic.o and CFLAGS_trace_kprobe_selftest.o The same applies to lib/livepatch/Makefile. Please note ccflags-remove-y has no effect to the sub-directories. In contrast, the previous notation got rid of compiler flags also from all the sub-directories. The following are not affected because they have no sub-directories: arch/arm/boot/compressed/ arch/powerpc/xmon/ arch/sh/ kernel/trace/ However, lib/ has several sub-directories. To keep the behavior, I added ccflags-remove-y to all Makefiles in subdirectories of lib/, except the following: lib/vdso/Makefile - Kbuild does not descend into this Makefile lib/raid/test/Makefile - This is not used for the kernel build I think commit 2464a609 ("ftrace: do not trace library functions") excluded too much. In the next commit, I will remove ccflags-remove-y from the sub-directories of lib/. Suggested-by:Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Anders Roxell <anders.roxell@linaro.org>
-
Masahiro Yamada authored
When you clean the build tree for ARCH=arm, you may see the following error message from 'nm' command: $ make -j24 ARCH=arm clean CLEAN arch/arm/crypto CLEAN arch/arm/kernel CLEAN arch/arm/mach-at91 CLEAN arch/arm/mach-omap2 CLEAN arch/arm/vdso CLEAN certs CLEAN lib CLEAN usr CLEAN net/wireless CLEAN drivers/firmware/efi/libstub nm: 'arch/arm/boot/compressed/../../../../vmlinux': No such file /bin/sh: 1: arithmetic expression: expecting primary: " " CLEAN arch/arm/boot/compressed CLEAN drivers/scsi CLEAN drivers/tty/vt CLEAN arch/arm/boot CLEAN vmlinux.symvers modules.builtin modules.builtin.modinfo Even if you rerun the same command, the error message will not be shown despite vmlinux is already gone. To reproduce it, the parallel option -j is needed. Single thread cleaning always executes 'archclean', 'vmlinuxclean' in this order, so vmlinux still exists when arch/arm/boot/compressed/ is cleaned. Looking at arch/arm/boot/compressed/Makefile does not help understand the reason of the error message. Both KBSS_SZ and LDFLAGS_vmlinux are assigned with '=' operator, hence, they are not expanded unless used. Obviously, 'make clean' does not use them. In fact, the root cause exists in the top Makefile: export LDFLAGS_vmlinux Since LDFLAGS_vmlinux is an exported variable, LDFLAGS_vmlinux in arch/arm/boot/compressed/Makefile is expanded when scripts/Makefile.clean has a command to execute. This is why the error message shows up only when there exist build artifacts in arch/arm/boot/compressed/. Adding 'unexport LDFLAGS_vmlinux' to arch/arm/boot/compressed/Makefile will fix it as far as ARCH=arm is concerned, but I think the proper fix is to get rid of 'export LDFLAGS_vmlinux' from the top Makefile. LDFLAGS_vmlinux in the top Makefile contains linker flags for the top vmlinux. LDFLAGS_vmlinux in arch/arm/boot/compressed/Makefile is for arch/arm/boot/compressed/vmlinux. They just happen to have the same variable name, but are used for different purposes. Stop shadowing LDFLAGS_vmlinux. This commit passes LDFLAGS_vmlinux to scripts/link-vmlinux.sh via a command line parameter instead of via an environment variable. LD and KBUILD_LDFLAGS are exported, but I did the same for consistency. Anyway, they must be included in cmd_link-vmlinux to allow if_changed to detect the changes in LD or KBUILD_LDFLAGS. The following Makefiles are not affected: arch/arm/boot/compressed/Makefile arch/h8300/boot/compressed/Makefile arch/nios2/boot/compressed/Makefile arch/parisc/boot/compressed/Makefile arch/s390/boot/compressed/Makefile arch/sh/boot/compressed/Makefile arch/sh/boot/romimage/Makefile arch/x86/boot/compressed/Makefile They use ':=' or '=' to clear the LDFLAGS_vmlinux inherited from the top Makefile. We need to take a closer look at the impact to unicore32 and xtensa. arch/unicore32/boot/compressed/Makefile only uses '+=' operator for LDFLAGS_vmlinux. So, the decompressor previously inherited the linker flags from the top Makefile. However, commit 70fac51f ("unicore32 additional architecture files: boot process") was merged before commit 1f2bfbd0 ("kbuild: link of vmlinux moved to a script"). So, I rather consider this is a bug fix of 1f2bfbd0. arch/xtensa/boot/boot-elf/Makefile is also affected, but this is also considered a fix for the same reason. It did not inherit LDFLAGS_vmlinux when commit 4bedea94 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 2") was merged. I deleted $(LDFLAGS_vmlinux), which is now empty. Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Tested-by:
-
Masahiro Yamada authored
Currently, the directories of objects are automatically created only for O= builds. It should not hurt to cater to this for in-tree builds too. Signed-off-by:
-
- 08 Aug, 2020 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - Fix tegra194-cpufreq module build failure caused by __cpu_logical_map not being exported. - Improve fixed_addresses comment regarding the fixmap buffer sizes. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix __cpu_logical_map undefined issue arm64/fixmap: make notes of fixed_addresses more precisely
-
Kefeng Wang authored
The __cpu_logical_map undefined issue occued when the new tegra194-cpufreq drvier building as a module. ERROR: modpost: "__cpu_logical_map" [drivers/cpufreq/tegra194-cpufreq.ko] undefined! The driver using cpu_logical_map() macro which will expand to __cpu_logical_map, we can't access it in a drvier. Let's turn cpu_logical_map() into a C wrapper and export it to fix the build issue. Also create a function set_cpu_logical_map(cpu, hwid) when assign a value to cpu_logical_map(cpu). Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
