timeval[0-9] were not used or used in a ready only code
so we can remove them safely and so the code
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Setting the key management scheme is done in SIOCSIWAUTH, so
no need to do anything in SIOCSIWGENIE.

Fix up function name.
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Handle more cases in IW_AUTH.

Avoid reporting errors (invalid parameter) on operations that we
can't do anything with.

Return -EINPROGRESS from some operations to get wpa_supplicant to
batch and commit changes.

In other operations apply the changes immediately.

Avoid writing WEP keys from the commit handler when WEP is not
being used.

Accept WPA_VERSION_DISABLED, which is received from wpa_supplicant
during WEP.
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Share logic between encodeext and encode, so that we can handle
subtle differences between them (implied set_tx), and clear the
appropriate keys if you attempt to switch straight from WPA to
WEP and vice versa.

Also reinstate the TX buffer flush, and ensure the key index is
written to the card little endian.
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Report the IE using the appropriate event instead of a custom one.
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

These macros don't map to anything different. Just remove them.
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

WPA has been disabled in the HCF layer. The firmware does
support it (it is used on other platforms). Enable it so
we can work through the issues.

Note that we also enable this for the HERMES 2.5 non-WARP
firmware cards.
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The function returns 0 on success and non-zero on error. So
correctly record the status so it is freed appropriately.
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fixed the checkpatch warnings in rtsx.c/.h, mostly braces and spaces
before tabs issues. Also fixed warning about not using
DEFINE_PCI_DEVICE_TABLE(...) macro.
Signed-off-by: Pelle Windestam <pelle@windestam.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix a bug that SDIO and SD normal card would appear simultaneously if a SDIO card inserted.
Signed-off-by: wwang <wei_wang@realsil.com.cn>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is a patch to the ni_atmio.c file which fixes a brace and whitespace warning found by the checkpatch.pl tool
Signed-off-by: Jake Burton <jake5991@live.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fixed missing KERN_* in printk statements.
Signed-off-by: Nasir Abed <nasirabed+kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Convert the display type to enum and rename disp_state to display2.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The driver does not need to manage CRT1 state.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

DAC tables are read-only and can be made const.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

RAM type tables are read-only and can be made const.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Move the memory bus width info to vb_device_info.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Move the memory channel info into vb_device_info.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The RAM type is device specific, so move it into vb_device_info.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Move vb_device_info into xgifb_video_info.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Comments are wrong, the table is read-only and can be made const.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

filter_tb is only used inside a single function, and it does not need
to be static.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Eliminate XGIfb_fix and initialize needed fields of fb_info->fix
in probe().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Eliminate default_var and initialize needed fields of fb_info->var
in probe().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Replace XGIfb_CRT2_write_enable with IND_XGI_CRT2_WRITE_ENABLE_315.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

pseudo_palette should be dynamically allocated for each fb.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The current refresh rate index should be stored in the device-specific
data allocated in probe().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The current mode index should be stored in the device-specific data
allocated in probe().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

We can get the information from the table with mode index.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Delete global xgi_video_info and dynamically allocate the data.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Avoid direct references to global xgi_video_info. This will help changing
the data from statically allocated to dynamically allocated.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Rename struct video_info to xgifb_video_info.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add a global variable for the default refresh rate. This is done to
get rid of references to xgi_video_info before the probe routine, which
should allocate the xgi_video_info dynamically in the future.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

XGIfb_query_VGA_config_space() is used only once during the init and
can be replaced with a single PCI configuration space read.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Move xgi_hw_device_info into xgi_video_info.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Move fb_info into xgi_video_info.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Don't access the global xgi_video_info directly in xgifb_remove().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tmem uses hash buckets each with their own rbtree and lock to
quickly lookup tmem objects.  tmem has TMEM_HASH_BUCKETS (256)
buckets per pool.  However, because of the way the tmem_oid is
generated for frontswap pages, only 16 unique tmem_oids are being
generated, resulting in only 16 of the 256 buckets being used.
This cause high lock contention for the per bucket locks.

This patch changes SWIZ_BITS to include more bits of the offset.
The result is that all 256 hash buckets are potentially used resulting in a
95% drop in hash bucket lock contention.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

With the mainline patch being applied to the wireless-next repository
by John Linville this driver is no longer needed under the staging
directory. This patch ends its life under the staging tree.

Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch cleans up several code style issues found
in InterfaceMisc.c reported by checkpatch.pl.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>