- 15 Feb, 2012 7 commits
-
-
Octavian Purdila authored
Since bluetooth uses multiple protocols types, to avoid lockdep warnings, we need to use different lockdep classes (one for each protocol type). This is already done in bt_sock_create but it misses a couple of cases when new connections are created. This patch corrects that to fix the following warning: <4>[ 1864.732366] ======================================================= <4>[ 1864.733030] [ INFO: possible circular locking dependency detected ] <4>[ 1864.733544] 3.0.16-mid3-00007-gc9a0f62 #3 <4>[ 1864.733883] ------------------------------------------------------- <4>[ 1864.734408] t.android.btclc/4204 is trying to acquire lock: <4>[ 1864.734869] (rfcomm_mutex){+.+.+.}, at: [<c14970ea>] rfcomm_dlc_close+0x15/0x30 <4>[ 1864.735541] <4>[ 1864.735549] but task is already holding lock: <4>[ 1864.736045] (sk_lock-AF_BLUETOOTH){+.+.+.}, at: [<c1498bf7>] lock_sock+0xa/0xc <4>[ 1864.736732] <4>[ 1864.736740] which lock already depends on the new lock. <4>[ 1864.736750] <4>[ 1864.737428] <4>[ 1864.737437] the existing dependency chain (in reverse order) is: <4>[ 1864.738016] <4>[ 1864.738023] -> #1 (sk_lock-AF_BLUETOOTH){+.+.+.}: <4>[ 1864.738549] [<c1062273>] lock_acquire+0x104/0x140 <4>[ 1864.738977] [<c13d35c1>] lock_sock_nested+0x58/0x68 <4>[ 1864.739411] [<c1493c33>] l2cap_sock_sendmsg+0x3e/0x76 <4>[ 1864.739858] [<c13d06c3>] __sock_sendmsg+0x50/0x59 <4>[ 1864.740279] [<c13d0ea2>] sock_sendmsg+0x94/0xa8 <4>[ 1864.740687] [<c13d0ede>] kernel_sendmsg+0x28/0x37 <4>[ 1864.741106] [<c14969ca>] rfcomm_send_frame+0x30/0x38 <4>[ 1864.741542] [<c1496a2a>] rfcomm_send_ua+0x58/0x5a <4>[ 1864.741959] [<c1498447>] rfcomm_run+0x441/0xb52 <4>[ 1864.742365] [<c104f095>] kthread+0x63/0x68 <4>[ 1864.742742] [<c14d5182>] kernel_thread_helper+0x6/0xd <4>[ 1864.743187] <4>[ 1864.743193] -> #0 (rfcomm_mutex){+.+.+.}: <4>[ 1864.743667] [<c1061ada>] __lock_acquire+0x988/0xc00 <4>[ 1864.744100] [<c1062273>] lock_acquire+0x104/0x140 <4>[ 1864.744519] [<c14d2c70>] __mutex_lock_common+0x3b/0x33f <4>[ 1864.744975] [<c14d303e>] mutex_lock_nested+0x2d/0x36 <4>[ 1864.745412] [<c14970ea>] rfcomm_dlc_close+0x15/0x30 <4>[ 1864.745842] [<c14990d9>] __rfcomm_sock_close+0x5f/0x6b <4>[ 1864.746288] [<c1499114>] rfcomm_sock_shutdown+0x2f/0x62 <4>[ 1864.746737] [<c13d275d>] sys_socketcall+0x1db/0x422 <4>[ 1864.747165] [<c14d42f0>] syscall_call+0x7/0xb Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Vinicius Costa Gomes authored
queue_delayed_work() expects a relative time for when that work should be scheduled. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Andrzej Kaczmarek authored
After moving L2CAP timers to workqueues l2cap_set_timer expects timeout value to be specified in jiffies but constants defined in miliseconds are used. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. __set_chan_timer macro still uses jiffies as input to avoid multiple conversions from/to jiffies for sk_sndtimeo value which is already specified in jiffies. Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Ackec-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Andrzej Kaczmarek authored
sk_sndtime value should be specified in jiffies thus initial value needs to be converted from miliseconds. Otherwise this timeout is unreliable when CONFIG_HZ is not set to 1000. Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Johan Hedberg authored
As reported by Dan Carpenter this function causes a Sparse warning and shouldn't be declared inline: include/net/bluetooth/l2cap.h:837:30 error: marked inline, but without a definition" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
-
Daniel Wagner authored
[ 2096.384084] btusb_send_frame:684: hci0 [ 2096.384087] usb 3-1: BOGUS urb flags, 2 --> 0 [ 2096.384091] Bluetooth: hci0 urb ffff8801b61d3a80 submission failed (22) According the documentation in usb_submit_urb() URB_ISO_ASAP flag is only allowed for endpoints of type USB_ENDPOINT_XFER_ISOC. This reverts commit b8aabfc9. Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Peter Hurley authored
Commit 33060542 fixed l2cap conn establishment for non-ssp remote devices by not setting HCI_CONN_ENCRYPT_PEND every time conn security is tested (which was always returning failure on any subsequent security checks). However, this broke l2cap conn establishment for ssp remote devices when an ACL link was already established at SDP-level security. This fix ensures that encryption must be pending whenever authentication is also pending. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
- 09 Feb, 2012 2 commits
-
-
Simon Graham authored
Fixes problem where caller would think routine succeeded when it failed leading to divide by zero panic. Signed-off-by: Simon Graham <simon.graham@virtualcomputer.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
read_lock(&tpt_trig->trig.leddev_list_lock) is accessed via the path ieee80211_open (->) ieee80211_do_open (->) ieee80211_mod_tpt_led_trig (->) ieee80211_start_tpt_led_trig (->) tpt_trig_timer before initializing it. the intilization of this read/write lock happens via the path ieee80211_led_init (->) led_trigger_register, but we are doing 'ieee80211_led_init' after 'ieeee80211_if_add' where we register netdev_ops. so we access leddev_list_lock before initializing it and causes the following bug in chrome laptops with AR928X cards with the following script while true do sudo modprobe -v ath9k sleep 3 sudo modprobe -r ath9k sleep 3 done BUG: rwlock bad magic on CPU#1, wpa_supplicant/358, f5b9eccc Pid: 358, comm: wpa_supplicant Not tainted 3.0.13 #1 Call Trace: [<8137b9df>] rwlock_bug+0x3d/0x47 [<81179830>] do_raw_read_lock+0x19/0x29 [<8137f063>] _raw_read_lock+0xd/0xf [<f9081957>] tpt_trig_timer+0xc3/0x145 [mac80211] [<f9081f3a>] ieee80211_mod_tpt_led_trig+0x152/0x174 [mac80211] [<f9076a3f>] ieee80211_do_open+0x11e/0x42e [mac80211] [<f9075390>] ? ieee80211_check_concurrent_iface+0x26/0x13c [mac80211] [<f9076d97>] ieee80211_open+0x48/0x4c [mac80211] [<812dbed8>] __dev_open+0x82/0xab [<812dc0c9>] __dev_change_flags+0x9c/0x113 [<812dc1ae>] dev_change_flags+0x18/0x44 [<8132144f>] devinet_ioctl+0x243/0x51a [<81321ba9>] inet_ioctl+0x93/0xac [<812cc951>] sock_ioctl+0x1c6/0x1ea [<812cc78b>] ? might_fault+0x20/0x20 [<810b1ebb>] do_vfs_ioctl+0x46e/0x4a2 [<810a6ebb>] ? fget_light+0x2f/0x70 [<812ce549>] ? sys_recvmsg+0x3e/0x48 [<810b1f35>] sys_ioctl+0x46/0x69 [<8137fa77>] sysenter_do_call+0x12/0x2 Cc: <stable@vger.kernel.org> Cc: Gary Morain <gmorain@google.com> Cc: Paul Stewart <pstew@google.com> Cc: Abhijit Pradhan <abhijit@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Acked-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 07 Feb, 2012 1 commit
-
-
Tomas Vanek authored
Some devices (iwl5100) cannot connect to zd1211rw based AP. It appears that zd1211 firmware messes up duration_id field if it is not set to zero by driver. Sniffing traffic shows that zd1211 is transmitting frames with duration_id bits 14 and 15 set and other bits appearing random. Setting duration_id at driver to zero results zd1211 outputting sane duration_id. This means that firmware is setting correct values itself and expects duration_id to be zero in first place. Looking at vendor driver shows that only PSPoll frames have duration_id set by driver, for other frames duration_id left zero. Original bug-report and attached patch at: http://sourceforge.net/mailarchive/message.php?msg_id=28759111Reported-by: Tomas Vanek <Tomas.Vanek@fbl.cz> [modified original patch from bug-report, added check for pspoll frame] Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 06 Feb, 2012 4 commits
-
-
Henrik Rydberg authored
The brcmsmac driver is now using the bcma SPROM CRC check, which does not recognize all chipsets that were functional prior to the switch. In particular, the current code bails out on odd CRC errors in recent Macbooks. This patch ignores those errors, with the argument that an unrecognized SPROM should be treated similarly to a non-existing one. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
commit adb5066a "ath9k_hw: do not apply the 2.4 ghz ack timeout workaround to cts" reduced the hardware CTS timeout to the normal values specified by the standard, but it turns out while it doesn't need the same extra time that it needs for the ACK timeout, it does need more than the value specified in the standard, but only for 2.4 GHz. This patch brings the CTS timeout value in sync with the initialization values, while still allowing adjustment for bigger distances. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Reported-by: Seth Forshee <seth.forshee@canonical.com> Reported-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
commit b4a82a0a "ath9k_hw: fix interpretation of the rx KeyMiss flag" fixed the interpretation of the KeyMiss flag for keycache based lookups, however WEP encryption uses a static index, so KeyMiss is always asserted for it, even though frames are decrypted properly. Fix this by clearing the ATH9K_RXERR_KEYMISS flag if no keycache based lookup was performed. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Reported-by: Laurent Bonnans <bonnans.l@gmail.com> Reported-by: Jurica Vukadin <u.ra604@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
If driver load is failed, sometimes few pointers may remain uninitialized ex. priv->wdev, priv->netdev, adapter->sleep_cfm This will cause NULL pointer dereferance while unloading the driver. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 03 Feb, 2012 3 commits
-
-
Mohammed Shafi Shajakhan authored
all works need to be initialized before ieee80211_register_hw to prevent mac80211 call backs such as drv_start, drv_config getting started. otherwise we would queue/cancel works before initializing them and it leads to kernel panic. this issue can be recreated with the following script in Chrome laptops with AR928X cards, with background scan running (or) Network manager is running while true do sudo modprobe -v ath9k sleep 3 sudo modprobe -r ath9k sleep 3 done EIP: [<81040a47>] __cancel_work_timer+0xb8/0xe1 SS:ESP 0068:f6be9d70 ---[ end trace 4f86d6139a9900ef ]--- Registered led device: ath9k-phy0 ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf88a0000, irq=16 Kernel panic - not syncing: Fatal exception Pid: 456, comm: wpa_supplicant Tainted: G D 3.0.13 #1 Call Trace: [<81379e21>] panic+0x53/0x14a [<81004a30>] oops_end+0x73/0x81 [<81004b53>] die+0x4c/0x55 [<81002710>] do_trap+0x7c/0x83 [<81002855>] ? do_bounds+0x58/0x58 [<810028cc>] do_invalid_op+0x77/0x81 [<81040a47>] ? __cancel_work_timer+0xb8/0xe1 [<810489ec>] ? sched_clock_cpu+0x81/0x11f [<8103f809>] ? wait_on_work+0xe2/0xf7 [<8137f807>] error_code+0x67/0x6c [<810300d8>] ? wait_consider_task+0x4ba/0x84c [<81040a47>] ? __cancel_work_timer+0xb8/0xe1 [<810380c9>] ? try_to_del_timer_sync+0x5f/0x67 [<81040a91>] cancel_work_sync+0xf/0x11 [<f88d7b7c>] ath_set_channel+0x62/0x25c [ath9k] [<f88d67d1>] ? ath9k_tx_last_beacon+0x26a/0x85c [ath9k] [<f88d8899>] ath_radio_disable+0x3f1/0x68e [ath9k] [<f90d0edb>] ieee80211_hw_config+0x111/0x116 [mac80211] [<f90dd95c>] __ieee80211_recalc_idle+0x919/0xa37 [mac80211] [<f90dda76>] __ieee80211_recalc_idle+0xa33/0xa37 [mac80211] [<812dbed8>] __dev_open+0x82/0xab Cc: <stable@vger.kernel.org> Cc: Gary Morain <gmorain@google.com> Cc: Paul Stewart <pstew@google.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Tested-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
Currently even if association is failed "iw link" shows some information about connected BSS and "Tx timeout" error is seen in dmesg log. This patch fixes below issues in the code to handle assoc failure case correctly. 1) "status" variable in mwifiex_wait_queue_complete() is not correctly updated. Hence driver doesn't inform cfg80211 stack about association failure. 2) During association network queues are stopped but carrier is not cleared, which gives Tx timeout error in failure case Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
The device seems to survive the issue, so no need to flood the logs about it... Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 01 Feb, 2012 6 commits
-
-
Eliad Peller authored
The current code checks for stored_mpdu_num > 1, causing the reorder_timer to be triggered indefinitely, but the frame is never timed-out (until the next packet is received) Signed-off-by: Eliad Peller <eliad@wizery.com> Cc: <stable@vger.kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Emmanuel Grumbach authored
In my AMPDU rework, I rely on the sequence numbers of frames. But I didn't check that the frame has a valid tid before updating the tracking counters. As a result, the Tx queues were stalled. People who hit this bug saw that we simply didn't let any data out. This bug was introduced in 3.3. This patch fixes that and checks that the frame is a QoS frame before looking at its tid and changing the counters. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Hauke Mehrtens authored
ssb supports one extra device on the cardbus. This results in two devices in total, one beeing the host controller itself and the other the external device connected to the hostcontroller over cardbus. This makes the cardbus slot work on the Linksys WRT150N. Reported-by: Aaron Z <aaronz@pls-net.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
Average users either don't care or they think that message indicates a problem... Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luigi Tarenga authored
This patch correct the type of variables containing the rssi values read from the rxwi. In function rt2800_agc_to_rssi() 3 variables (rssi0, rssi1, rss2) defined as int was assigned a 16bit signed values as unsigned. From a test with a hi-gain antenna I verified that the rxwi contains signed rssi values in the range -13/+81 (inclusive) with 0 as an error condition. In case of negative values a condition is triggered and the function return -128dBm while the signal is at its maximum. This patch correct the cast so negative values are not treated as very high positive values (ex. -13 does not become 243). Signed-off-by: Luigi Tarenga <luigi.tarenga@gmail.com> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Jesper Juhl authored
bcma_bus_scan() leaks 'struct bcma_device' bytes if bcma_get_next_core() returns error. Restructure the code so we always kfree() the memory we allocate to the variable 'core' before it goes out of scope. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 30 Jan, 2012 3 commits
-
-
Eric Dumazet authored
Commit 0884d7aa (AF_UNIX: Fix poll blocking problem when reading from a stream socket) added a regression for epoll() in Edge Triggered mode (EPOLLET) Appropriate fix is to use skb_peek()/skb_unlink() instead of skb_dequeue(), and only call skb_unlink() when skb is fully consumed. This remove the need to requeue a partial skb into sk_receive_queue head and the extra sk->sk_data_ready() calls that added the regression. This is safe because once skb is given to sk_receive_queue, it is not modified by a writer, and readers are serialized by u->readlock mutex. This also reduce number of spinlock acquisition for small reads or MSG_PEEK users so should improve overall performance. Reported-by: Nick Mathewson <nickm@freehaven.net> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Alexey Moiseytsev <himeraster@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
This commit fixes tcp_trim_head() to recalculate the number of segments in the skb with the skb's existing MSS, so trimming the head causes the skb segment count to be monotonically non-increasing - it should stay the same or go down, but not increase. Previously tcp_trim_head() used the current MSS of the connection. But if there was a decrease in MSS between original transmission and ACK (e.g. due to PMTUD), this could cause tcp_trim_head() to counter-intuitively increase the segment count when trimming bytes off the head of an skb. This violated assumptions in tcp_tso_acked() that tcp_trim_head() only decreases the packet count, so that packets_acked in tcp_tso_acked() could underflow, leading tcp_clean_rtx_queue() to pass u32 pkts_acked values as large as 0xffffffff to ca_ops->pkts_acked(). As an aside, if tcp_trim_head() had really wanted the skb to reflect the current MSS, it should have called tcp_set_skb_tso_segs() unconditionally, since a decrease in MSS would mean that a single-packet skb should now be sliced into multiple segments. Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Glauber Costa authored
sysctl_tcp_mem() initialization was moved to sysctl_tcp_ipv4.c in commit 3dc43e3e, since it became a per-ns value. That code, however, will never run when CONFIG_SYSCTL is disabled, leading to bogus values on those fields - causing hung TCP sockets. This patch fixes it by keeping an initialization code in tcp_init(). It will be overwritten by the first net namespace init if CONFIG_SYSCTL is compiled in, and do the right thing if it is compiled out. It is also named properly as tcp_init_mem(), to properly signal its non-sysctl side effect on TCP limits. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Glauber Costa <glommer@parallels.com> Cc: David S. Miller <davem@davemloft.net> Link: http://lkml.kernel.org/r/4F22D05A.8030604@parallels.com [ renamed the function, tidied up the changelog a bit ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Jan, 2012 3 commits
-
-
Eric W. Biederman authored
caif is a subsystem and as such it needs to register with register_pernet_subsys instead of register_pernet_device. Among other problems using register_pernet_device was resulting in net_generic being called before the caif_net structure was allocated. Which has been causing net_generic to fail with either BUG_ON's or by return NULL pointers. A more ugly problem that could be caused is packets in flight why the subsystem is shutting down. To remove confusion also remove the cruft cause by inappropriately trying to fix this bug. With the aid of the previous patch I have tested this patch and confirmed that using register_pernet_subsys makes the failure go away as it should. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Tested-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
By definition net_generic should never be called when it can return NULL. Fail conspicously with a BUG_ON to make it clear when people mess up that a NULL return should never happen. Recently there was a bug in the CAIF subsystem where it was registered with register_pernet_device instead of register_pernet_subsys. It was erroneously concluded that net_generic could validly return NULL and that net_assign_generic was buggy (when it was just inefficient). Hopefully this BUG_ON will prevent people to coming to similar erroneous conclusions in the futrue. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Jan, 2012 8 commits
-
-
Glauber Costa authored
Commit 36a12119 removed linux/module.h include statement from one of the headers that end up in net/sock.h. It was providing us with static_branch() definition implicitly, so after its removal the build got broken. To fix this, and avoid having this happening in the future, let me do the right thing and include linux/jump_label.h explicitly in sock.h. Signed-off-by: Glauber Costa <glommer@parallels.com> Reported-by: Randy Dunlap <rdunlap@xenotime.net> CC: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Gula authored
Setting link parameters on a netdevice changes the value of if_nlmsg_size(), therefore it is necessary to recalculate min_ifinfo_dump_size. Signed-off-by: Stefan Gula <steweg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
Tunnel devices set NETIF_F_LLTX to bypass HARD_TX_LOCK. Sit and ipip set this unconditionally in ops->setup, but gre enables it conditionally after parameter passing in ops->newlink. This is not called during tunnel setup as below, however, so GRE tunnels are still taking the lock. modprobe ip_gre ip tunnel add test0 mode gre remote 10.5.1.1 dev lo ip link set test0 up ip addr add 10.6.0.1 dev test0 # cat /sys/class/net/test0/features # $DIR/test_tunnel_xmit 10 10.5.2.1 ip route add 10.5.2.0/24 dev test0 ip tunnel del test0 The newlink callback is only called in rtnl_netlink, and only if the device is new, as it calls register_netdevice internally. Gre tunnels are created at 'ip tunnel add' with ioctl SIOCADDTUNNEL, which calls ipgre_tunnel_locate, which calls register_netdev. rtnl_newlink is called at 'ip link set', but skips ops->newlink and the device is up with locking still enabled. The equivalent ipip tunnel works fine, btw (just substitute 'method gre' for 'method ipip'). On kernels before /sys/class/net/*/features was removed [1], the first commented out line returns 0x6000 with method gre, which indicates that NETIF_F_LLTX (0x1000) is not set. With ipip, it reports 0x7000. This test cannot be used on recent kernels where the sysfs file is removed (and ETHTOOL_GFEATURES does not currently work for tunnel devices, because they lack dev->ethtool_ops). The second commented out line calls a simple transmission test [2] that sends on 24 cores at maximum rate. Results of a single run: ipip: 19,372,306 gre before patch: 4,839,753 gre after patch: 19,133,873 This patch replicates the condition check in ipgre_newlink to ipgre_tunnel_locate. It works for me, both with oseq on and off. This is the first time I looked at rtnetlink and iproute2 code, though, so someone more knowledgeable should probably check the patch. Thanks. The tail of both functions is now identical, by the way. To avoid code duplication, I'll be happy to rework this and merge the two. [1] http://patchwork.ozlabs.org/patch/104610/ [2] http://kernel.googlecode.com/files/xmit_udp_parallel.cSigned-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Liu authored
Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
When a new net namespace is created, we should attach to it a "struct net_generic" with enough slots (even empty), or we can hit the following BUG_ON() : [ 200.752016] kernel BUG at include/net/netns/generic.h:40! ... [ 200.752016] [<ffffffff825c3cea>] ? get_cfcnfg+0x3a/0x180 [ 200.752016] [<ffffffff821cf0b0>] ? lockdep_rtnl_is_held+0x10/0x20 [ 200.752016] [<ffffffff825c41be>] caif_device_notify+0x2e/0x530 [ 200.752016] [<ffffffff810d61b7>] notifier_call_chain+0x67/0x110 [ 200.752016] [<ffffffff810d67c1>] raw_notifier_call_chain+0x11/0x20 [ 200.752016] [<ffffffff821bae82>] call_netdevice_notifiers+0x32/0x60 [ 200.752016] [<ffffffff821c2b26>] register_netdevice+0x196/0x300 [ 200.752016] [<ffffffff821c2ca9>] register_netdev+0x19/0x30 [ 200.752016] [<ffffffff81c1c67a>] loopback_net_init+0x4a/0xa0 [ 200.752016] [<ffffffff821b5e62>] ops_init+0x42/0x180 [ 200.752016] [<ffffffff821b600b>] setup_net+0x6b/0x100 [ 200.752016] [<ffffffff821b6466>] copy_net_ns+0x86/0x110 [ 200.752016] [<ffffffff810d5789>] create_new_namespaces+0xd9/0x190 net_alloc_generic() should take into account the maximum index into the ptr array, as a subsystem might use net_generic() anytime. This also reduces number of reallocations in net_assign_generic() Reported-by: Sasha Levin <levinsasha928@gmail.com> Tested-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Sjur Brændeland <sjur.brandeland@stericsson.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Flavio Leitner authored
Port autoselection finds a port and then drop the lock, then right after that, gets the hash bucket again and lock it. Fix it to go direct. Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Flavio Leitner authored
The current code checks for conflicts when the application requests a specific port. If there is no conflict, then the request is granted. On the other hand, the port autoselection done by the kernel fails when all ports are bound even when there is a port with no conflict available. The fix changes port autoselection to check if there is a conflict and use it if not. Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
James Chapman authored
When a packet is received on an L2TP IP socket (L2TPv3 IP link encapsulation), the l2tpip socket's backlog_rcv function calls xfrm4_policy_check(). This is not necessary, since it was called before the skb was added to the backlog. With CONFIG_NET_NS enabled, xfrm4_policy_check() will oops if skb->dev is null, so this trivial patch removes the call. This bug has always been present, but only when CONFIG_NET_NS is enabled does it cause problems. Most users are probably using UDP encapsulation for L2TP, hence the problem has only recently surfaced. EIP: 0060:[<c12bb62b>] EFLAGS: 00210246 CPU: 0 EIP is at l2tp_ip_recvmsg+0xd4/0x2a7 EAX: 00000001 EBX: d77b5180 ECX: 00000000 EDX: 00200246 ESI: 00000000 EDI: d63cbd30 EBP: d63cbd18 ESP: d63cbcf4 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Call Trace: [<c1218568>] sock_common_recvmsg+0x31/0x46 [<c1215c92>] __sock_recvmsg_nosec+0x45/0x4d [<c12163a1>] __sock_recvmsg+0x31/0x3b [<c1216828>] sock_recvmsg+0x96/0xab [<c10b2693>] ? might_fault+0x47/0x81 [<c10b2693>] ? might_fault+0x47/0x81 [<c1167fd0>] ? _copy_from_user+0x31/0x115 [<c121e8c8>] ? copy_from_user+0x8/0xa [<c121ebd6>] ? verify_iovec+0x3e/0x78 [<c1216604>] __sys_recvmsg+0x10a/0x1aa [<c1216792>] ? sock_recvmsg+0x0/0xab [<c105a99b>] ? __lock_acquire+0xbdf/0xbee [<c12d5a99>] ? do_page_fault+0x193/0x375 [<c10d1200>] ? fcheck_files+0x9b/0xca [<c10d1259>] ? fget_light+0x2a/0x9c [<c1216bbb>] sys_recvmsg+0x2b/0x43 [<c1218145>] sys_socketcall+0x16d/0x1a5 [<c11679f0>] ? trace_hardirqs_on_thunk+0xc/0x10 [<c100305f>] sysenter_do_call+0x12/0x38 Code: c6 05 8c ea a8 c1 01 e8 0c d4 d9 ff 85 f6 74 07 3e ff 86 80 00 00 00 b9 17 b6 2b c1 ba 01 00 00 00 b8 78 ed 48 c1 e8 23 f6 d9 ff <ff> 76 0c 68 28 e3 30 c1 68 2d 44 41 c1 e8 89 57 01 00 83 c4 0c Signed-off-by: James Chapman <jchapman@katalix.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Jan, 2012 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Davem says: 1) Fix JIT code generation on x86-64 for divide by zero, from Eric Dumazet. 2) tg3 header length computation correction from Eric Dumazet. 3) More build and reference counting fixes for socket memory cgroup code from Glauber Costa. 4) module.h snuck back into a core header after all the hard work we did to remove that, from Paul Gortmaker and Jesper Dangaard Brouer. 5) Fix PHY naming regression and add some new PCI IDs in stmmac, from Alessandro Rubini. 6) Netlink message generation fix in new team driver, should only advertise the entries that changed during events, from Jiri Pirko. 7) SRIOV VF registration and unregistration fixes, and also add a missing PCI ID, from Roopa Prabhu. 8) Fix infinite loop in tx queue flush code of brcmsmac, from Stanislaw Gruszka. 9) ftgmac100/ftmac100 build fix, missing interrupt.h include. 10) Memory leak fix in net/hyperv do_set_mutlicast() handling, from Wei Yongjun. 11) Off by one fix in netem packet scheduler, from Vijay Subramanian. 12) TCP loss detection fix from Yuchung Cheng. 13) TCP reset packet MD5 calculation uses wrong address, fix from Shawn Lu. 14) skge carrier assertion and DMA mapping fixes from Stephen Hemminger. 15) Congestion recovery undo performed at the wrong spot in BIC and CUBIC congestion control modules, fix from Neal Cardwell. 16) Ethtool ETHTOOL_GSSET_INFO is unnecessarily restrictive, from Michał Mirosław. 17) Fix triggerable race in ipv6 sysctl handling, from Francesco Ruggeri. 18) Statistics bug fixes in mlx4 from Eugenia Emantayev. 19) rds locking bug fix during info dumps, from your's truly. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits) rds: Make rds_sock_lock BH rather than IRQ safe. netprio_cgroup.h: dont include module.h from other includes net: flow_dissector.c missing include linux/export.h team: send only changed options/ports via netlink net/hyperv: fix possible memory leak in do_set_multicast() drivers/net: dsa/mv88e6xxx.c files need linux/module.h stmmac: added PCI identifiers llc: Fix race condition in llc_ui_recvmsg stmmac: fix phy naming inconsistency dsa: Add reporting of silicon revision for Marvell 88E6123/88E6161/88E6165 switches. tg3: fix ipv6 header length computation skge: add byte queue limit support mv643xx_eth: Add Rx Discard and Rx Overrun statistics bnx2x: fix compilation error with SOE in fw_dump bnx2x: handle CHIP_REVISION during init_one bnx2x: allow user to change ring size in ISCSI SD mode bnx2x: fix Big-Endianess in ethtool -t bnx2x: fixed ethtool statistics for MF modes bnx2x: credit-leakage fixup on vlan_mac_del_all macvlan: fix a possible use after free ...
-
David S. Miller authored
rds_sock_info() triggers locking warnings because we try to perform a local_bh_enable() (via sock_i_ino()) while hardware interrupts are disabled (via taking rds_sock_lock). There is no reason for rds_sock_lock to be a hardware IRQ disabling lock, none of these access paths run in hardware interrupt context. Therefore making it a BH disabling lock is safe and sufficient to fix this bug. Reported-by: Kumar Sanghvi <kumaras@chelsio.com> Reported-by: Josh Boyer <jwboyer@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
A considerable effort was invested in wiping out module.h from being present in all the other standard includes. This one leaked back in, but once again isn't strictly necessary, so remove it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-