- 31 May, 2016 1 commit
-
-
Filipe Manana authored
While we are finishing a device replace operation we can have a concurrent task trying to do a read repair operation, in which case it will call btrfs_map_block() to get a struct btrfs_bio which can have a stripe that points to the source device of the device replace operation. This allows for the read repair task to dereference the stripe's device pointer after the device replace operation has freed the source device, resulting in an invalid memory access. This is similar to the problem solved by my previous patch in the same series and named "Btrfs: fix race between device replace and discard". So fix this by surrounding the call to btrfs_map_block() and the code that uses the returned struct btrfs_bio with calls to btrfs_bio_counter_inc_blocked() and btrfs_bio_counter_dec(), giving the proper serialization with the finishing phase of the device replace operation. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Josef Bacik <jbacik@fb.com>
-
- 30 May, 2016 7 commits
-
-
Filipe Manana authored
While we are finishing a device replace operation, we can make a discard operation (fs mounted with -o discard) do an invalid memory access like the one reported by the following trace: [ 3206.384654] general protection fault: 0000 [#1] PREEMPT SMP [ 3206.387520] Modules linked in: dm_mod btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis psmouse tpm ppdev sg parport_pc evdev i2c_piix4 parport processor serio_raw i2c_core pcspkr button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom ata_generic sd_mod virtio_scsi ata_piix libata virtio_pci virtio_ring scsi_mod e1000 virtio floppy [last unloaded: btrfs] [ 3206.388595] CPU: 14 PID: 29194 Comm: fsstress Not tainted 4.6.0-rc7-btrfs-next-29+ #1 [ 3206.388595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [ 3206.388595] task: ffff88017ace0100 ti: ffff880171b98000 task.ti: ffff880171b98000 [ 3206.388595] RIP: 0010:[<ffffffff8124d233>] [<ffffffff8124d233>] blkdev_issue_discard+0x5c/0x2a7 [ 3206.388595] RSP: 0018:ffff880171b9bb80 EFLAGS: 00010246 [ 3206.388595] RAX: ffff880171b9bc28 RBX: 000000000090d000 RCX: 0000000000000000 [ 3206.388595] RDX: ffffffff82fa1b48 RSI: ffffffff8179f46c RDI: ffffffff82fa1b48 [ 3206.388595] RBP: ffff880171b9bcc0 R08: 0000000000000000 R09: 0000000000000001 [ 3206.388595] R10: ffff880171b9bce0 R11: 000000000090f000 R12: ffff880171b9bbe8 [ 3206.388595] R13: 0000000000000010 R14: 0000000000004868 R15: 6b6b6b6b6b6b6b6b [ 3206.388595] FS: 00007f6182e4e700(0000) GS:ffff88023fdc0000(0000) knlGS:0000000000000000 [ 3206.388595] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3206.388595] CR2: 00007f617c2bbb18 CR3: 000000017ad9c000 CR4: 00000000000006e0 [ 3206.388595] Stack: [ 3206.388595] 0000000000004878 0000000000000000 0000000002400040 0000000000000000 [ 3206.388595] 0000000000000000 ffff880171b9bbe8 ffff880171b9bbb0 ffff880171b9bbb0 [ 3206.388595] ffff880171b9bbc0 ffff880171b9bbc0 ffff880171b9bbd0 ffff880171b9bbd0 [ 3206.388595] Call Trace: [ 3206.388595] [<ffffffffa042899e>] btrfs_issue_discard+0x12f/0x143 [btrfs] [ 3206.388595] [<ffffffffa042899e>] ? btrfs_issue_discard+0x12f/0x143 [btrfs] [ 3206.388595] [<ffffffffa042e862>] btrfs_discard_extent+0x87/0xde [btrfs] [ 3206.388595] [<ffffffffa04303b5>] btrfs_finish_extent_commit+0xb2/0x1df [btrfs] [ 3206.388595] [<ffffffff8149c246>] ? __mutex_unlock_slowpath+0x150/0x15b [ 3206.388595] [<ffffffffa04464c4>] btrfs_commit_transaction+0x7fc/0x980 [btrfs] [ 3206.388595] [<ffffffff8149c246>] ? __mutex_unlock_slowpath+0x150/0x15b [ 3206.388595] [<ffffffffa0459af6>] btrfs_sync_file+0x38f/0x428 [btrfs] [ 3206.388595] [<ffffffff811a8292>] vfs_fsync_range+0x8c/0x9e [ 3206.388595] [<ffffffff811a82c0>] vfs_fsync+0x1c/0x1e [ 3206.388595] [<ffffffff811a8417>] do_fsync+0x31/0x4a [ 3206.388595] [<ffffffff811a8637>] SyS_fsync+0x10/0x14 [ 3206.388595] [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8 [ 3206.388595] [<ffffffff81100c6b>] ? time_hardirqs_off+0x9/0x14 [ 3206.388595] [<ffffffff8108e87d>] ? trace_hardirqs_off_caller+0x1f/0xaa This happens because when we call btrfs_map_block() from btrfs_discard_extent() to get a btrfs_bio structure, the device replace operation has not finished yet, but before we use the device of one of the stripes from the returned btrfs_bio structure, the device object is freed. This is illustrated by the following diagram. CPU 1 CPU 2 btrfs_dev_replace_start() (...) btrfs_dev_replace_finishing() btrfs_start_transaction() btrfs_commit_transaction() (...) btrfs_sync_file() btrfs_start_transaction() (...) btrfs_commit_transaction() btrfs_finish_extent_commit() btrfs_discard_extent() btrfs_map_block() --> returns a struct btrfs_bio with a stripe that has a device field pointing to source device of the replace operation (the device that is being replaced) mutex_lock(&uuid_mutex) mutex_lock(&fs_info->fs_devices->device_list_mutex) mutex_lock(&fs_info->chunk_mutex) btrfs_dev_replace_update_device_in_mapping_tree() --> iterates the mapping tree and for each extent map that has a stripe pointing to the source device, it updates the stripe to point to the target device instead btrfs_rm_dev_replace_blocked() --> waits for fs_info->bio_counter to go down to 0 btrfs_rm_dev_replace_remove_srcdev() --> removes source device from the list of devices mutex_unlock(&fs_info->chunk_mutex) mutex_unlock(&fs_info->fs_devices->device_list_mutex) mutex_unlock(&uuid_mutex) btrfs_rm_dev_replace_free_srcdev() --> frees the source device --> iterates over all stripes of the returned struct btrfs_bio --> for each stripe it dereferences its device pointer --> it ends up finding a pointer to the device used as the source device for the replace operation and that was already freed So fix this by surrounding the call to btrfs_map_block(), and the code that uses the returned struct btrfs_bio, with calls to btrfs_bio_counter_inc_blocked() and btrfs_bio_counter_dec(), so that the finishing phase of the device replace operation blocks until the the bio counter decreases to zero before it frees the source device. This is the same approach we do at btrfs_map_bio() for example. Signed-off-by: -
Filipe Manana authored
While iterating and copying extents from the source device, the device replace code keeps adjusting a left cursor that is used to make sure that once we finish processing a device extent, any future writes to extents from the corresponding block group will get into both the source and target devices. This left cursor is also used for resuming the device replace operation at mount time. However using this left cursor to decide whether writes go into both devices or only the source device is not enough to guarantee we don't miss copying extents into the target device. There are two cases where the current approach fails. The first one is related to when there are holes in the device and they get allocated for new block groups while the device replace operation is iterating the device extents (more on this explained below). The second one is that when that loop over the device extents finishes, we start dellaloc, wait for all ordered extents and then commit the current transaction, we might have got new block groups allocated that are now using a device extent that has an offset greater then or equals to the value of the left cursor, in which case writes to extents belonging to these new block groups will get issued only to the source device. For the first case where the current approach of using a left cursor fails, consider the source device currently has the following layout: [ extent bg A ] [ hole, unallocated space ] [extent bg B ] 3Gb 4Gb 5Gb While we are iterating the device extents from the source device using the commit root of the device tree, the following happens: CPU 1 CPU 2 <we are at transaction N> scrub_enumerate_chunks() --> searches the device tree for extents belonging to the source device using the device tree's commit root --> 1st iteration finds extent belonging to block group A --> sets block group A to RO mode (btrfs_inc_block_group_ro) --> sets cursor left to found_key.offset which is 3Gb --> scrub_chunk() starts copies all allocated extents from block group's A stripe at source device into target device btrfs_alloc_chunk() --> allocates device extent in the range [4Gb, 5Gb[ from the source device for a new block group C extent allocated from block group C for a direct IO, buffered write or btree node/leaf extent is written to, perhaps in response to a writepages() call from the VM or directly through direct IO the write is made only against the source device and not against the target device because the extent's offset is in the interval [4Gb, 5Gb[ which is larger then the value of cursor_left (3Gb) --> scrub_chunks() finishes --> updates left cursor from 3Gb to 4Gb --> btrfs_dec_block_group_ro() sets block group A back to RW mode <we are still at transaction N> --> 2nd iteration finds extent belonging to block group B - it did not find the new extent in the range [4Gb, 5Gb[ for block group C because we are using the device tree's commit root or even because the block group's items are not all yet inserted in the respective btrees, that is, the block group is still attached to some transaction handle's new_bgs list and btrfs_create_pending_block_groups() was not called yet against that transaction handle, so the device extent items were not yet inserted into the devices tree <we are still at transaction N> --> so we end not copying anything from the newly allocated device extent from the source device to the target device So fix this by making __btrfs_map_block() always redirect writes to the target device as well, independently of the left cursor's value. With this change the left cursor is now used only for the purpose of tracking progress and allow a mount operation to resume a device replace. Signed-off-by: -
Filipe Manana authored
After it finishes processing a device extent, the device replace code sets back the block group to RW mode and then after that it sets the left cursor to match the logical end address of the block group, so that future writes into extents belonging to the block group go both the source (old) and target (new) devices. However from the moment we turn the block group back to RW mode we have a short time window, that lasts until we update the left cursor's value, where extents can be allocated from the block group and written to, in which case they will not be copied/written to the target (new) device. Fix this by updating the left cursor's value before turning the block group back to RW mode. Signed-off-by:
-
Filipe Manana authored
We were assigning new values to fields of the device replace object without holding the respective lock after processing each device extent. This is important for the left cursor field which can be accessed by a concurrent task running __btrfs_map_block (which, correctly, takes the device replace lock). So change these fields while holding the device replace lock. Signed-off-by:
-
Filipe Manana authored
When we do a device replace, for each device extent we find from the source device, we set the corresponding block group to readonly mode to prevent writes into it from happening while we are copying the device extent from the source to the target device. However just before we set the block group to readonly mode some concurrent task might have already allocated an extent from it or decided it could perform a nocow write into one of its extents, which can make the device replace process to miss copying an extent since it uses the extent tree's commit root to search for extents and only once it finishes searching for all extents belonging to the block group it does set the left cursor to the logical end address of the block group - this is a problem if the respective ordered extents finish while we are searching for extents using the extent tree's commit root and no transaction commit happens while we are iterating the tree, since it's the delayed references created by the ordered extents (when they complete) that insert the extent items into the extent tree (using the non-commit root of course). Example: CPU 1 CPU 2 btrfs_dev_replace_start() btrfs_scrub_dev() scrub_enumerate_chunks() --> finds device extent belonging to block group X <transaction N starts> starts buffered write against some inode writepages is run against that inode forcing dellaloc to run btrfs_writepages() extent_writepages() extent_write_cache_pages() __extent_writepage() writepage_delalloc() run_delalloc_range() cow_file_range() btrfs_reserve_extent() --> allocates an extent from block group X (which is not yet in RO mode) btrfs_add_ordered_extent() --> creates ordered extent Y flush_epd_write_bio() --> bio against the extent from block group X is submitted btrfs_inc_block_group_ro(bg X) --> sets block group X to readonly scrub_chunk(bg X) scrub_stripe(device extent from srcdev) --> keeps searching for extent items belonging to the block group using the extent tree's commit root --> it never blocks due to fs_info->scrub_pause_req as no one tries to commit transaction N --> copies all extents found from the source device into the target device --> finishes search loop bio completes ordered extent Y completes and creates delayed data reference which will add an extent item to the extent tree when run (typically at transaction commit time) --> so the task doing the scrub/device replace at CPU 1 misses this and does not copy this extent into the new/target device btrfs_dec_block_group_ro(bg X) --> turns block group X back to RW mode dev_replace->cursor_left is set to the logical end offset of block group X So fix this by waiting for all cow and nocow writes after setting a block group to readonly mode. Signed-off-by: -
Filipe Manana authored
When it's finishing, the device replace code iterates all extent maps representing block group and for each one that has a stripe that refers to the source device, it replaces its device with the target device. However when it replaces the source device with the target device it, the target device still has an ID of 0ULL (BTRFS_DEV_REPLACE_DEVID), only after its ID is changed to match the one from the source device. This leads to races with the chunk removal code that can temporarly see a device with an ID of 0ULL and then attempt to use that ID to remove items from the device tree and fail, causing a transaction abort: [ 9238.594364] BTRFS info (device sdf): dev_replace from /dev/sdf (devid 3) to /dev/sde finished [ 9238.594377] ------------[ cut here ]------------ [ 9238.594402] WARNING: CPU: 14 PID: 21566 at fs/btrfs/volumes.c:2771 btrfs_remove_chunk+0x2e5/0x793 [btrfs] [ 9238.594403] BTRFS: Transaction aborted (error 1) [ 9238.594416] Modules linked in: btrfs crc32c_generic acpi_cpufreq xor tpm_tis tpm raid6_pq ppdev parport_pc processor psmouse parport i2c_piix4 evdev sg i2c_core se rio_raw pcspkr button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio e1000 scsi_mod fl oppy [last unloaded: btrfs] [ 9238.594418] CPU: 14 PID: 21566 Comm: btrfs-cleaner Not tainted 4.6.0-rc7-btrfs-next-29+ #1 [ 9238.594419] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [ 9238.594421] 0000000000000000 ffff88017f1dbc60 ffffffff8126b42c ffff88017f1dbcb0 [ 9238.594422] 0000000000000000 ffff88017f1dbca0 ffffffff81052b14 00000ad37f1dbd18 [ 9238.594423] 0000000000000001 ffff88018068a558 ffff88005c4b9c00 ffff880233f60db0 [ 9238.594424] Call Trace: [ 9238.594428] [<ffffffff8126b42c>] dump_stack+0x67/0x90 [ 9238.594430] [<ffffffff81052b14>] __warn+0xc2/0xdd [ 9238.594432] [<ffffffff81052b7a>] warn_slowpath_fmt+0x4b/0x53 [ 9238.594434] [<ffffffff8116c311>] ? kmem_cache_free+0x128/0x188 [ 9238.594450] [<ffffffffa04d43f5>] btrfs_remove_chunk+0x2e5/0x793 [btrfs] [ 9238.594452] [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc [ 9238.594464] [<ffffffffa04a26fa>] btrfs_delete_unused_bgs+0x317/0x382 [btrfs] [ 9238.594476] [<ffffffffa04a961d>] cleaner_kthread+0x1ad/0x1c7 [btrfs] [ 9238.594489] [<ffffffffa04a9470>] ? btree_invalidatepage+0x8e/0x8e [btrfs] [ 9238.594490] [<ffffffff8106f403>] kthread+0xd4/0xdc [ 9238.594494] [<ffffffff8149e242>] ret_from_fork+0x22/0x40 [ 9238.594495] [<ffffffff8106f32f>] ? kthread_stop+0x286/0x286 [ 9238.594496] ---[ end trace 183efbe50275f059 ]--- The sequence of steps leading to this is like the following: CPU 1 CPU 2 btrfs_dev_replace_finishing() at this point dev_replace->tgtdev->devid == BTRFS_DEV_REPLACE_DEVID (0ULL) ... btrfs_start_transaction() btrfs_commit_transaction() btrfs_delete_unused_bgs() btrfs_remove_chunk() looks up for the extent map corresponding to the chunk lock_chunks() (chunk_mutex) check_system_chunk() unlock_chunks() (chunk_mutex) locks fs_info->chunk_mutex btrfs_dev_replace_update_device_in_mapping_tree() --> iterates fs_info->mapping_tree and replaces the device in every extent map's map->stripes[] with dev_replace->tgtdev, which still has an id of 0ULL (BTRFS_DEV_REPLACE_DEVID) iterates over all stripes from the extent map --> calls btrfs_free_dev_extent() passing it the target device that still has an ID of 0ULL --> btrfs_free_dev_extent() fails --> aborts current transaction finishes setting up the target device, namely it sets tgtdev->devid to the value of srcdev->devid (which is necessarily > 0) frees the srcdev unlocks fs_info->chunk_mutex So fix this by taking the device list mutex while processing the stripes for the chunk's extent map. This is similar to the race between device replace and block group creation that was fixed by commit 50460e37 ("Btrfs: fix race when finishing dev replace leading to transaction abort"). Signed-off-by: -
Filipe Manana authored
The list of devices is protected by the device_list_mutex and the device replace code, in its finishing phase correctly takes that mutex before removing the source device from that list. However the readahead code was iterating that list without acquiring the respective mutex leading to crashes later on due to invalid memory accesses: [125671.831036] general protection fault: 0000 [#1] PREEMPT SMP [125671.832129] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis tpm ppdev evdev parport_pc psmouse sg parport processor ser [125671.834973] CPU: 10 PID: 19603 Comm: kworker/u32:19 Tainted: G W 4.6.0-rc7-btrfs-next-29+ #1 [125671.834973] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [125671.834973] Workqueue: btrfs-readahead btrfs_readahead_helper [btrfs] [125671.834973] task: ffff8801ac520540 ti: ffff8801ac918000 task.ti: ffff8801ac918000 [125671.834973] RIP: 0010:[<ffffffff81270479>] [<ffffffff81270479>] __radix_tree_lookup+0x6a/0x105 [125671.834973] RSP: 0018:ffff8801ac91bc28 EFLAGS: 00010206 [125671.834973] RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b6a RCX: 0000000000000000 [125671.834973] RDX: 0000000000000000 RSI: 00000000000c1bff RDI: ffff88002ebd62a8 [125671.834973] RBP: ffff8801ac91bc70 R08: 0000000000000001 R09: 0000000000000000 [125671.834973] R10: ffff8801ac91bc70 R11: 0000000000000000 R12: ffff88002ebd62a8 [125671.834973] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000000c1bff [125671.834973] FS: 0000000000000000(0000) GS:ffff88023fd40000(0000) knlGS:0000000000000000 [125671.834973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [125671.834973] CR2: 000000000073cae4 CR3: 00000000b7723000 CR4: 00000000000006e0 [125671.834973] Stack: [125671.834973] 0000000000000000 ffff8801422d5600 ffff8802286bbc00 0000000000000000 [125671.834973] 0000000000000001 ffff8802286bbc00 00000000000c1bff 0000000000000000 [125671.834973] ffff88002e639eb8 ffff8801ac91bc80 ffffffff81270541 ffff8801ac91bcb0 [125671.834973] Call Trace: [125671.834973] [<ffffffff81270541>] radix_tree_lookup+0xd/0xf [125671.834973] [<ffffffffa04ae6a6>] reada_peer_zones_set_lock+0x3e/0x60 [btrfs] [125671.834973] [<ffffffffa04ae8b9>] reada_pick_zone+0x29/0x103 [btrfs] [125671.834973] [<ffffffffa04af42f>] reada_start_machine_worker+0x129/0x2d3 [btrfs] [125671.834973] [<ffffffffa04880be>] btrfs_scrubparity_helper+0x185/0x3aa [btrfs] [125671.834973] [<ffffffffa0488341>] btrfs_readahead_helper+0xe/0x10 [btrfs] [125671.834973] [<ffffffff81069691>] process_one_work+0x271/0x4e9 [125671.834973] [<ffffffff81069dda>] worker_thread+0x1eb/0x2c9 [125671.834973] [<ffffffff81069bef>] ? rescuer_thread+0x2b3/0x2b3 [125671.834973] [<ffffffff8106f403>] kthread+0xd4/0xdc [125671.834973] [<ffffffff8149e242>] ret_from_fork+0x22/0x40 [125671.834973] [<ffffffff8106f32f>] ? kthread_stop+0x286/0x286 So fix this by taking the device_list_mutex in the readahead code. We can't use here the lighter approach of using a rcu_read_lock() and rcu_read_unlock() pair together with a list_for_each_entry_rcu() call because we end up doing calls to sleeping functions (kzalloc()) in the respective code path. Signed-off-by:
-
- 26 May, 2016 2 commits
-
-
Chris Mason authored
When btrfs_copy_from_user isn't able to copy all of the pages, we need to adjust our accounting to reflect the work that was actually done. Commit 2e78c927 changed around the decisions a little and we ended up skipping the accounting adjustments some of the time. This commit makes sure that when we don't copy anything at all, we still hop into the adjustments, and switches to release_bytes instead of write_bytes, since write_bytes isn't aligned. The accounting errors led to warnings during btrfs_destroy_inode: [ 70.847532] WARNING: CPU: 10 PID: 514 at fs/btrfs/inode.c:9350 btrfs_destroy_inode+0x2b3/0x2c0 [ 70.847536] Modules linked in: i2c_piix4 virtio_net i2c_core input_leds button led_class serio_raw acpi_cpufreq sch_fq_codel autofs4 virtio_blk [ 70.847538] CPU: 10 PID: 514 Comm: umount Tainted: G W 4.6.0-rc6_00062_g2997da1-dirty #23 [ 70.847539] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.0-1.fc24 04/01/2014 [ 70.847542] 0000000000000000 ffff880ff5cafab8 ffffffff8149d5e9 0000000000000202 [ 70.847543] 0000000000000000 0000000000000000 0000000000000000 ffff880ff5cafb08 [ 70.847547] ffffffff8107bdfd ffff880ff5cafaf8 000024868120013d ffff880ff5cafb28 [ 70.847547] Call Trace: [ 70.847550] [<ffffffff8149d5e9>] dump_stack+0x51/0x78 [ 70.847551] [<ffffffff8107bdfd>] __warn+0xfd/0x120 [ 70.847553] [<ffffffff8107be3d>] warn_slowpath_null+0x1d/0x20 [ 70.847555] [<ffffffff8139c9e3>] btrfs_destroy_inode+0x2b3/0x2c0 [ 70.847556] [<ffffffff812003a1>] ? __destroy_inode+0x71/0x140 [ 70.847558] [<ffffffff812004b3>] destroy_inode+0x43/0x70 [ 70.847559] [<ffffffff810b7b5f>] ? wake_up_bit+0x2f/0x40 [ 70.847560] [<ffffffff81200c68>] evict+0x148/0x1d0 [ 70.847562] [<ffffffff81398ade>] ? start_transaction+0x3de/0x460 [ 70.847564] [<ffffffff81200d49>] dispose_list+0x59/0x80 [ 70.847565] [<ffffffff81201ba0>] evict_inodes+0x180/0x190 [ 70.847566] [<ffffffff812191ff>] ? __sync_filesystem+0x3f/0x50 [ 70.847568] [<ffffffff811e95f8>] generic_shutdown_super+0x48/0x100 [ 70.847569] [<ffffffff810b75c0>] ? woken_wake_function+0x20/0x20 [ 70.847571] [<ffffffff811e9796>] kill_anon_super+0x16/0x30 [ 70.847573] [<ffffffff81365cde>] btrfs_kill_super+0x1e/0x130 [ 70.847574] [<ffffffff811e99be>] deactivate_locked_super+0x4e/0x90 [ 70.847576] [<ffffffff811e9e61>] deactivate_super+0x51/0x70 [ 70.847577] [<ffffffff8120536f>] cleanup_mnt+0x3f/0x80 [ 70.847579] [<ffffffff81205402>] __cleanup_mnt+0x12/0x20 [ 70.847581] [<ffffffff81098358>] task_work_run+0x68/0xa0 [ 70.847582] [<ffffffff810022b6>] exit_to_usermode_loop+0xd6/0xe0 [ 70.847583] [<ffffffff81002e1d>] do_syscall_64+0xbd/0x170 [ 70.847586] [<ffffffff817d4dbc>] entry_SYSCALL64_slow_path+0x25/0x25 This is the test program I used to force short returns from btrfs_copy_from_user void *dontneed(void *arg) { char *p = arg; int ret; while(1) { ret = madvise(p, BUFSIZE/4, MADV_DONTNEED); if (ret) { perror("madvise"); exit(1); } } } int main(int ac, char **av) { int ret; int fd; char *filename; unsigned long offset; char *buf; int i; pthread_t tid; if (ac != 2) { fprintf(stderr, "usage: dammitdave filename\n"); exit(1); } buf = mmap(NULL, BUFSIZE, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); if (buf == MAP_FAILED) { perror("mmap"); exit(1); } memset(buf, 'a', BUFSIZE); filename = av[1]; ret = pthread_create(&tid, NULL, dontneed, buf); if (ret) { fprintf(stderr, "error %d from pthread_create\n", ret); exit(1); } ret = pthread_detach(tid); if (ret) { fprintf(stderr, "pthread detach failed %d\n", ret); exit(1); } while (1) { fd = open(filename, O_RDWR | O_CREAT, 0600); if (fd < 0) { perror("open"); exit(1); } for (i = 0; i < ROUNDS; i++) { int this_write = BUFSIZE; offset = rand() % MAXSIZE; ret = pwrite(fd, buf, this_write, offset); if (ret < 0) { perror("pwrite"); exit(1); } else if (ret != this_write) { fprintf(stderr, "short write to %s offset %lu ret %d\n", filename, offset, ret); exit(1); } if (i == ROUNDS - 1) { ret = sync_file_range(fd, offset, 4096, SYNC_FILE_RANGE_WRITE); if (ret < 0) { perror("sync_file_range"); exit(1); } } } ret = ftruncate(fd, 0); if (ret < 0) { perror("ftruncate"); exit(1); } ret = close(fd); if (ret) { perror("close"); exit(1); } ret = unlink(filename); if (ret) { perror("unlink"); exit(1); } } return 0; } Signed-off-by:
Chris Mason <clm@fb.com> Reported-by:
Dave Jones <dsj@fb.com> Fixes: 2e78c927 cc: stable@vger.kernel.org # v4.6 Signed-off-by:
-
Chris Mason authored
Merge branch 'for-chris-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.7
-
- 25 May, 2016 7 commits
-
-
David Sterba authored
-
David Sterba authored
-
David Sterba authored
-
Nicholas D Steeves authored
Signed-off-by:
Nicholas D Steeves <nsteeves@gmail.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Zhao Lei authored
We usually call btrfs_put_bbio() when btrfs_map_block() failed, btrfs_put_bbio() works right whether bbio is a valid value, or NULL. But there is a exception, in some case, btrfs_map_block() will return fail without touching *bbio(keeping its original value), and if bbio was not initialized yet, invalid memory accessing will happened. Above case is in scrub_missing_raid56_pages(), and similar case in scrub_raid56_parity(). Signed-off-by:
Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by:
-
Liu Bo authored
btrfs's fiemap is supposed to return 0 on success and return < 0 on error. however, ret becomes 1 after looking up the last file extent: btrfs_lookup_file_extent -> btrfs_search_slot(..., ins_len=0, cow=0) and if the offset is beyond EOF, we'll get 'path' pointed to the place of potentail insertion, and ret == 1. This may confuse applications using ioctl(FIEL_IOC_FIEMAP). Signed-off-by:Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Liu Bo authored
While reading sys_chunk_array in superblock, btrfs creates a temporary extent buffer. Since we don't use it after finishing reading sys_chunk_array, we don't need to keep it in memory. Signed-off-by:
-
- 17 May, 2016 2 commits
-
-
Chris Mason authored
Merge branch 'for-chris-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/fdmanana/linux into for-linus-4.7 Signed-off-by:
-
Chris Mason authored
Merge branch 'for-chris-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.7
-
- 16 May, 2016 5 commits
-
-
David Sterba authored
# Conflicts: # include/uapi/linux/btrfs.h
-
David Sterba authored
-
David Sterba authored
-
David Sterba authored
-
Scott Talbert authored
A 'struct bio' is allocated in scrub_missing_raid56_pages(), but it was never freed anywhere. Signed-off-by:
Scott Talbert <scott.talbert@hgst.com> Signed-off-by:
-
- 13 May, 2016 14 commits
-
-
Filipe Manana authored
Due to the optimization of lockless direct IO writes (the inode's i_mutex is not held) introduced in commit 38851cc1 ("Btrfs: implement unlocked dio write"), we started having races between such writes with concurrent fsync operations that use the fast fsync path. These races were addressed in the patches titled "Btrfs: fix race between fsync and lockless direct IO writes" and "Btrfs: fix race between fsync and direct IO writes for prealloc extents". The races happened because the direct IO path, like every other write path, does create extent maps followed by the corresponding ordered extents while the fast fsync path collected first ordered extents and then it collected extent maps. This made it possible to log file extent items (based on the collected extent maps) without waiting for the corresponding ordered extents to complete (get their IO done). The two fixes mentioned before added a solution that consists of making the direct IO path create first the ordered extents and then the extent maps, while the fsync path attempts to collect any new ordered extents once it collects the extent maps. This was simple and did not require adding any synchonization primitive to any data structure (struct btrfs_inode for example) but it makes things more fragile for future development endeavours and adds an exceptional approach compared to the other write paths. This change adds a read-write semaphore to the btrfs inode structure and makes the direct IO path create the extent maps and the ordered extents while holding read access on that semaphore, while the fast fsync path collects extent maps and ordered extents while holding write access on that semaphore. The logic for direct IO write path is encapsulated in a new helper function that is used both for cow and nocow direct IO writes. Signed-off-by:
-
Filipe Manana authored
Relocation of a block group waits for all existing tasks flushing dellaloc, starting direct IO writes and any ordered extents before starting the relocation process. However for direct IO writes that end up doing nocow (inode either has the flag nodatacow set or the write is against a prealloc extent) we have a short time window that allows for a race that makes relocation proceed without waiting for the direct IO write to complete first, resulting in data loss after the relocation finishes. This is illustrated by the following diagram: CPU 1 CPU 2 btrfs_relocate_block_group(bg X) direct IO write starts against an extent in block group X using nocow mode (inode has the nodatacow flag or the write is for a prealloc extent) btrfs_direct_IO() btrfs_get_blocks_direct() --> can_nocow_extent() returns 1 btrfs_inc_block_group_ro(bg X) --> turns block group into RO mode btrfs_wait_ordered_roots() --> returns and does not know about the DIO write happening at CPU 2 (the task there has not created yet an ordered extent) relocate_block_group(bg X) --> rc->stage == MOVE_DATA_EXTENTS find_next_extent() --> returns extent that the DIO write is going to write to relocate_data_extent() relocate_file_extent_cluster() --> reads the extent from disk into pages belonging to the relocation inode and dirties them --> creates DIO ordered extent btrfs_submit_direct() --> submits bio against a location on disk obtained from an extent map before the relocation started btrfs_wait_ordered_range() --> writes all the pages read before to disk (belonging to the relocation inode) relocation finishes bio completes and wrote new data to the old location of the block group So fix this by tracking the number of nocow writers for a block group and make sure relocation waits for that number to go down to 0 before starting to move the extents. The same race can also happen with buffered writes in nocow mode since the patch I recently made titled "Btrfs: don't do unnecessary delalloc flushes when relocating", because we are no longer flushing all delalloc which served as a synchonization mechanism (due to page locking) and ensured the ordered extents for nocow buffered writes were created before we called btrfs_wait_ordered_roots(). The race with direct IO writes in nocow mode existed before that patch (no pages are locked or used during direct IO) and that fixed only races with direct IO writes that do cow. Signed-off-by: -
Filipe Manana authored
When we do a direct IO write against a preallocated extent (fallocate) that does not go beyond the i_size of the inode, we do the write operation without holding the inode's i_mutex (an optimization that landed in commit 38851cc1 ("Btrfs: implement unlocked dio write")). This allows for a very tiny time window where a race can happen with a concurrent fsync using the fast code path, as the direct IO write path creates first a new extent map (no longer flagged as a prealloc extent) and then it creates the ordered extent, while the fast fsync path first collects ordered extents and then it collects extent maps. This allows for the possibility of the fast fsync path to collect the new extent map without collecting the new ordered extent, and therefore logging an extent item based on the extent map without waiting for the ordered extent to be created and complete. This can result in a situation where after a log replay we end up with an extent not marked anymore as prealloc but it was only partially written (or not written at all), exposing random, stale or garbage data corresponding to the unwritten pages and without any checksums in the csum tree covering the extent's range. This is an extension of what was done in commit de0ee0ed ("Btrfs: fix race between fsync and lockless direct IO writes"). So fix this by creating first the ordered extent and then the extent map, so that this way if the fast fsync patch collects the new extent map it also collects the corresponding ordered extent. Signed-off-by:
-
Filipe Manana authored
When we do a rename with the whiteout flag, we need to create the whiteout inode, which in the worst case requires 5 transaction units (1 inode item, 1 inode ref, 2 dir items and 1 xattr if selinux is enabled). So bump the number of transaction units from 11 to 16 if the whiteout flag is set. Signed-off-by: -
Filipe Manana authored
The btrfs_rename_exchange() started as a copy-paste from btrfs_rename(), which had a race fixed by my previous patch titled "Btrfs: pin log earlier when renaming", and so it suffers from the same problem. We pin the logs of the affected roots after we insert the new inode references, leaving a time window where concurrent tasks logging the inodes can end up logging both the new and old references, resulting in log trees that when replayed can turn the metadata into inconsistent states. This behaviour was added to btrfs_rename() in 2009 without any explanation about why not pinning the logs earlier, just leaving a comment about the posibility for the race. As of today it's perfectly safe and sane to pin the logs before we start doing any of the steps involved in the rename operation. Signed-off-by: -
Filipe Manana authored
If rename exchange operations fail at some point after we pinned any of the logs, we end up aborting the current transaction but never unpin the logs, which leaves concurrent tasks that are trying to sync the logs (as part of an fsync request from user space) blocked forever and preventing the filesystem from being unmountable. Fix this by safely unpinning the log. Signed-off-by: -
Filipe Manana authored
If we failed to fully setup the whiteout inode during a rename operation with the whiteout flag, we ended up leaking the inode, not decrementing its link count nor removing all its items from the fs/subvol tree. Signed-off-by: -
Dan Fuhry authored
Two new flags, RENAME_EXCHANGE and RENAME_WHITEOUT, provide for new behavior in the renameat2() syscall. This behavior is primarily used by overlayfs. This patch adds support for these flags to btrfs, enabling it to be used as a fully functional upper layer for overlayfs. RENAME_EXCHANGE support was written by Davide Italiano originally submitted on 2 April 2015. Signed-off-by:
Davide Italiano <dccitaliano@gmail.com> Signed-off-by:
Dan Fuhry <dfuhry@datto.com> [ remove unlikely ] Signed-off-by:
-
Filipe Manana authored
We were pinning the log right after the first step in the rename operation (inserting inode ref for the new name in the destination directory) instead of doing it before. This behaviour was introduced in 2009 for some reason that was not mentioned neither on the changelog nor any comment, with the drawback of a small time window where concurrent log writers can end up logging the new inode reference for the inode we are renaming while the rename operation is in progress (so that we can end up with a log containing both the new and old references). As of today there's no reason to not pin the log before that first step anymore, so just fix this. Signed-off-by: -
Filipe Manana authored
If rename operations fail at some point after we pinned the log, we end up aborting the current transaction but never unpin the log, which leaves concurrent tasks that are trying to sync the log (as part of an fsync request from user space) blocked forever and preventing the filesystem from being unmountable. Fix this by safely unpinning the log. Signed-off-by: -
Filipe Manana authored
Before we start the actual relocation process of a block group, we do calls to flush delalloc of all inodes and then wait for ordered extents to complete. However we do these flush calls just to make sure we don't race with concurrent tasks that have actually already started to run delalloc and have allocated an extent from the block group we want to relocate, right before we set it to readonly mode, but have not yet created the respective ordered extents. The flush calls make us wait for such concurrent tasks because they end up calling filemap_fdatawrite_range() (through btrfs_start_delalloc_roots() -> __start_delalloc_inodes() -> btrfs_alloc_delalloc_work() -> btrfs_run_delalloc_work()) which ends up serializing us with those tasks due to attempts to lock the same pages (and the delalloc flush procedure calls the allocator and creates the ordered extents before unlocking the pages). These flushing calls not only make us waste time (cpu, IO) but also reduce the chances of writing larger extents (applications might be writing to contiguous ranges and we flush before they finish dirtying the whole ranges). So make sure we don't flush delalloc and just wait for concurrent tasks that have already started flushing delalloc and have allocated an extent from the block group we are about to relocate. This change also ends up fixing a race with direct IO writes that makes relocation not wait for direct IO ordered extents. This race is illustrated by the following diagram: CPU 1 CPU 2 btrfs_relocate_block_group(bg X) starts direct IO write, target inode currently has no ordered extents ongoing nor dirty pages (delalloc regions), therefore the root for our inode is not in the list fs_info->ordered_roots btrfs_direct_IO() __blockdev_direct_IO() btrfs_get_blocks_direct() btrfs_lock_extent_direct() locks range in the io tree btrfs_new_extent_direct() btrfs_reserve_extent() --> extent allocated from bg X btrfs_inc_block_group_ro(bg X) btrfs_start_delalloc_roots() __start_delalloc_inodes() --> does nothing, no dealloc ranges in the inode's io tree so the inode's root is not in the list fs_info->delalloc_roots btrfs_wait_ordered_roots() --> does not find the inode's root in the list fs_info->ordered_roots --> ends up not waiting for the direct IO write started by the task at CPU 2 relocate_block_group(rc->stage == MOVE_DATA_EXTENTS) prepare_to_relocate() btrfs_commit_transaction() iterates the extent tree, using its commit root and moves extents into new locations btrfs_add_ordered_extent_dio() --> now a ordered extent is created and added to the list root->ordered_extents and the root added to the list fs_info->ordered_roots --> this is too late and the task at CPU 1 already started the relocation btrfs_commit_transaction() btrfs_finish_ordered_io() btrfs_alloc_reserved_file_extent() --> adds delayed data reference for the extent allocated from bg X relocate_block_group(rc->stage == UPDATE_DATA_PTRS) prepare_to_relocate() btrfs_commit_transaction() --> delayed refs are run, so an extent item for the allocated extent from bg X is added to extent tree --> commit roots are switched, so the next scan in the extent tree will see the extent item sees the extent in the extent tree When this happens the relocation produces the following warning when it finishes: [ 7260.832836] ------------[ cut here ]------------ [ 7260.834653] WARNING: CPU: 5 PID: 6765 at fs/btrfs/relocation.c:4318 btrfs_relocate_block_group+0x245/0x2a1 [btrfs]() [ 7260.838268] Modules linked in: btrfs crc32c_generic xor ppdev raid6_pq psmouse sg acpi_cpufreq evdev i2c_piix4 tpm_tis serio_raw tpm i2c_core pcspkr parport_pc [ 7260.850935] CPU: 5 PID: 6765 Comm: btrfs Not tainted 4.5.0-rc6-btrfs-next-28+ #1 [ 7260.852998] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [ 7260.852998] 0000000000000000 ffff88020bf57bc0 ffffffff812648b3 0000000000000000 [ 7260.852998] 0000000000000009 ffff88020bf57bf8 ffffffff81051608 ffffffffa03c1b2d [ 7260.852998] ffff8800b2bbb800 0000000000000000 ffff8800b17bcc58 ffff8800399dd000 [ 7260.852998] Call Trace: [ 7260.852998] [<ffffffff812648b3>] dump_stack+0x67/0x90 [ 7260.852998] [<ffffffff81051608>] warn_slowpath_common+0x99/0xb2 [ 7260.852998] [<ffffffffa03c1b2d>] ? btrfs_relocate_block_group+0x245/0x2a1 [btrfs] [ 7260.852998] [<ffffffff810516d4>] warn_slowpath_null+0x1a/0x1c [ 7260.852998] [<ffffffffa03c1b2d>] btrfs_relocate_block_group+0x245/0x2a1 [btrfs] [ 7260.852998] [<ffffffffa039d9de>] btrfs_relocate_chunk.isra.29+0x66/0xdb [btrfs] [ 7260.852998] [<ffffffffa039f314>] btrfs_balance+0xde1/0xe4e [btrfs] [ 7260.852998] [<ffffffff8127d671>] ? debug_smp_processor_id+0x17/0x19 [ 7260.852998] [<ffffffffa03a9583>] btrfs_ioctl_balance+0x255/0x2d3 [btrfs] [ 7260.852998] [<ffffffffa03ac96a>] btrfs_ioctl+0x11e0/0x1dff [btrfs] [ 7260.852998] [<ffffffff811451df>] ? handle_mm_fault+0x443/0xd63 [ 7260.852998] [<ffffffff81491817>] ? _raw_spin_unlock+0x31/0x44 [ 7260.852998] [<ffffffff8108b36a>] ? arch_local_irq_save+0x9/0xc [ 7260.852998] [<ffffffff811876ab>] vfs_ioctl+0x18/0x34 [ 7260.852998] [<ffffffff81187cb2>] do_vfs_ioctl+0x550/0x5be [ 7260.852998] [<ffffffff81190c30>] ? __fget_light+0x4d/0x71 [ 7260.852998] [<ffffffff81187d77>] SyS_ioctl+0x57/0x79 [ 7260.852998] [<ffffffff81492017>] entry_SYSCALL_64_fastpath+0x12/0x6b [ 7260.893268] ---[ end trace eb7803b24ebab8ad ]--- This is because at the end of the first stage, in relocate_block_group(), we commit the current transaction, which makes delayed refs run, the commit roots are switched and so the second stage will find the extent item that the ordered extent added to the delayed refs. But this extent was not moved (ordered extent completed after first stage finished), so at the end of the relocation our block group item still has a positive used bytes counter, triggering a warning at the end of btrfs_relocate_block_group(). Later on when trying to read the extent contents from disk we hit a BUG_ON() due to the inability to map a block with a logical address that belongs to the block group we relocated and is no longer valid, resulting in the following trace: [ 7344.885290] BTRFS critical (device sdi): unable to find logical 12845056 len 4096 [ 7344.887518] ------------[ cut here ]------------ [ 7344.888431] kernel BUG at fs/btrfs/inode.c:1833! [ 7344.888431] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 7344.888431] Modules linked in: btrfs crc32c_generic xor ppdev raid6_pq psmouse sg acpi_cpufreq evdev i2c_piix4 tpm_tis serio_raw tpm i2c_core pcspkr parport_pc [ 7344.888431] CPU: 0 PID: 6831 Comm: od Tainted: G W 4.5.0-rc6-btrfs-next-28+ #1 [ 7344.888431] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [ 7344.888431] task: ffff880215818600 ti: ffff880204684000 task.ti: ffff880204684000 [ 7344.888431] RIP: 0010:[<ffffffffa037c88c>] [<ffffffffa037c88c>] btrfs_merge_bio_hook+0x54/0x6b [btrfs] [ 7344.888431] RSP: 0018:ffff8802046878f0 EFLAGS: 00010282 [ 7344.888431] RAX: 00000000ffffffea RBX: 0000000000001000 RCX: 0000000000000001 [ 7344.888431] RDX: ffff88023ec0f950 RSI: ffffffff8183b638 RDI: 00000000ffffffff [ 7344.888431] RBP: ffff880204687908 R08: 0000000000000001 R09: 0000000000000000 [ 7344.888431] R10: ffff880204687770 R11: ffffffff82f2d52d R12: 0000000000001000 [ 7344.888431] R13: ffff88021afbfee8 R14: 0000000000006208 R15: ffff88006cd199b0 [ 7344.888431] FS: 00007f1f9e1d6700(0000) GS:ffff88023ec00000(0000) knlGS:0000000000000000 [ 7344.888431] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7344.888431] CR2: 00007f1f9dc8cb60 CR3: 000000023e3b6000 CR4: 00000000000006f0 [ 7344.888431] Stack: [ 7344.888431] 0000000000001000 0000000000001000 ffff880204687b98 ffff880204687950 [ 7344.888431] ffffffffa0395c8f ffffea0004d64d48 0000000000000000 0000000000001000 [ 7344.888431] ffffea0004d64d48 0000000000001000 0000000000000000 0000000000000000 [ 7344.888431] Call Trace: [ 7344.888431] [<ffffffffa0395c8f>] submit_extent_page+0xf5/0x16f [btrfs] [ 7344.888431] [<ffffffffa03970ac>] __do_readpage+0x4a0/0x4f1 [btrfs] [ 7344.888431] [<ffffffffa039680d>] ? btrfs_create_repair_bio+0xcb/0xcb [btrfs] [ 7344.888431] [<ffffffffa037eeb4>] ? btrfs_writepage_start_hook+0xbc/0xbc [btrfs] [ 7344.888431] [<ffffffff8108df55>] ? trace_hardirqs_on+0xd/0xf [ 7344.888431] [<ffffffffa039728c>] __do_contiguous_readpages.constprop.26+0xc2/0xe4 [btrfs] [ 7344.888431] [<ffffffffa037eeb4>] ? btrfs_writepage_start_hook+0xbc/0xbc [btrfs] [ 7344.888431] [<ffffffffa039739b>] __extent_readpages.constprop.25+0xed/0x100 [btrfs] [ 7344.888431] [<ffffffff81129d24>] ? lru_cache_add+0xe/0x10 [ 7344.888431] [<ffffffffa0397ea8>] extent_readpages+0x160/0x1aa [btrfs] [ 7344.888431] [<ffffffffa037eeb4>] ? btrfs_writepage_start_hook+0xbc/0xbc [btrfs] [ 7344.888431] [<ffffffff8115daad>] ? alloc_pages_current+0xa9/0xcd [ 7344.888431] [<ffffffffa037cdc9>] btrfs_readpages+0x1f/0x21 [btrfs] [ 7344.888431] [<ffffffff81128316>] __do_page_cache_readahead+0x168/0x1fc [ 7344.888431] [<ffffffff811285a0>] ondemand_readahead+0x1f6/0x207 [ 7344.888431] [<ffffffff811285a0>] ? ondemand_readahead+0x1f6/0x207 [ 7344.888431] [<ffffffff8111cf34>] ? pagecache_get_page+0x2b/0x154 [ 7344.888431] [<ffffffff8112870e>] page_cache_sync_readahead+0x3d/0x3f [ 7344.888431] [<ffffffff8111dbf7>] generic_file_read_iter+0x197/0x4e1 [ 7344.888431] [<ffffffff8117773a>] __vfs_read+0x79/0x9d [ 7344.888431] [<ffffffff81178050>] vfs_read+0x8f/0xd2 [ 7344.888431] [<ffffffff81178a38>] SyS_read+0x50/0x7e [ 7344.888431] [<ffffffff81492017>] entry_SYSCALL_64_fastpath+0x12/0x6b [ 7344.888431] Code: 8d 4d e8 45 31 c9 45 31 c0 48 8b 00 48 c1 e2 09 48 8b 80 80 fc ff ff 4c 89 65 e8 48 8b b8 f0 01 00 00 e8 1d 42 02 00 85 c0 79 02 <0f> 0b 4c 0 [ 7344.888431] RIP [<ffffffffa037c88c>] btrfs_merge_bio_hook+0x54/0x6b [btrfs] [ 7344.888431] RSP <ffff8802046878f0> [ 7344.970544] ---[ end trace eb7803b24ebab8ae ]--- Signed-off-by: -
Filipe Manana authored
Before the relocation process of a block group starts, it sets the block group to readonly mode, then flushes all delalloc writes and then finally it waits for all ordered extents to complete. This last step includes waiting for ordered extents destinated at extents allocated in other block groups, making us waste unecessary time. So improve this by waiting only for ordered extents that fall into the block group's range. Signed-off-by:
-
Filipe Manana authored
If we create a symlink, fsync its parent directory, crash/power fail and mount the filesystem, we end up with an empty symlink, which not only is useless it's also not allowed in linux (the man page symlink(2) is well explicit about that). So we just need to make sure to fully log an inode if it's a symlink, to ensure its inline extent gets logged, ensuring the same behaviour as ext3, ext4, xfs, reiserfs, f2fs, nilfs2, etc. Example reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/testdir $ sync $ ln -s /mnt/foo /mnt/testdir/bar $ xfs_io -c fsync /mnt/testdir <power fail> $ mount /dev/sdb /mnt $ readlink /mnt/testdir/bar <empty string> A test case for fstests follows soon. Signed-off-by: -
Filipe Manana authored
If we move a directory to a new parent and later log that parent and don't explicitly log the old parent, when we replay the log we can end up with entries for the moved directory in both the old and new parent directories. Besides being ilegal to have directories with multiple hard links in linux, it also resulted in the leaving the inode item with a link count of 1. A similar issue also happens if we move a regular file - after the log tree is replayed the file has a link in both the old and new parent directories, when it should be only at the new directory. Sample reproducer: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt $ mkdir /mnt/x $ mkdir /mnt/y $ touch /mnt/x/foo $ mkdir /mnt/y/z $ sync $ ln /mnt/x/foo /mnt/x/bar $ mv /mnt/y/z /mnt/x/z < power fail > $ mount /dev/sdc /mnt $ ls -1Ri /mnt /mnt: 257 x 258 y /mnt/x: 259 bar 259 foo 260 z /mnt/x/z: /mnt/y: 260 z /mnt/y/z: $ umount /dev/sdc $ btrfs check /dev/sdc Checking filesystem on /dev/sdc UUID: a67e2c4a-a4b4-4fdc-b015-9d9af1e344be checking extents checking free space cache checking fs roots root 5 inode 260 errors 2000, link count wrong unresolved ref dir 257 index 4 namelen 1 name z filetype 2 errors 0 unresolved ref dir 258 index 2 namelen 1 name z filetype 2 errors 0 (...) Attempting to remove the directory becomes impossible: $ mount /dev/sdc /mnt $ rmdir /mnt/y/z $ ls -lh /mnt/y ls: cannot access /mnt/y/z: No such file or directory total 0 d????????? ? ? ? ? ? z $ rmdir /mnt/x/z rmdir: failed to remove ‘/mnt/x/z’: Stale file handle $ ls -lh /mnt/x ls: cannot access /mnt/x/z: Stale file handle total 0 -rw-r--r-- 2 root root 0 Apr 6 18:06 bar -rw-r--r-- 2 root root 0 Apr 6 18:06 foo d????????? ? ? ? ? ? z So make sure that on rename we set the last_unlink_trans value for our inode, even if it's a directory, to the value of the current transaction's ID and that if the new parent directory is logged that we fallback to a transaction commit. A test case for fstests is being submitted as well. Signed-off-by:
-
- 12 May, 2016 2 commits
-
-
David Sterba authored
The macro btrfs_std_error got renamed to btrfs_handle_fs_error in an independent branch for the same merge target (4.7). To make the code compilable for bisectability reasons, add a temporary stub. Signed-off-by: -
Qu Wenruo authored
Current btrfs qgroup design implies a requirement that after calling btrfs_qgroup_account_extents() there must be a commit root switch. Normally this is OK, as btrfs_qgroup_accounting_extents() is only called inside btrfs_commit_transaction() just be commit_cowonly_roots(). However there is a exception at create_pending_snapshot(), which will call btrfs_qgroup_account_extents() but no any commit root switch. In case of creating a snapshot whose parent root is itself (create a snapshot of fs tree), it will corrupt qgroup by the following trace: (skipped unrelated data) ====== btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 1 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 0, excl = 0 qgroup_update_counters: qgid = 5, cur_old_count = 0, cur_new_count = 1, rfer = 16384, excl = 16384 btrfs_qgroup_account_extent: bytenr = 29786112, num_bytes = 16384, nr_old_roots = 0, nr_new_roots = 0 ====== The problem here is in first qgroup_account_extent(), the nr_new_roots of the extent is 1, which means its reference got increased, and qgroup increased its rfer and excl. But at second qgroup_account_extent(), its reference got decreased, but between these two qgroup_account_extent(), there is no switch roots. This leads to the same nr_old_roots, and this extent just got ignored by qgroup, which means this extent is wrongly accounted. Fix it by call commit_cowonly_roots() after qgroup_account_extent() in create_pending_snapshot(), with needed preparation. Mark: I added a check at the top of qgroup_account_snapshot() to skip this code if qgroups are turned off. xfstest btrfs/122 exposes this problem. Signed-off-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Signed-off-by:
-
