- 09 Mar, 2020 3 commits
-
-
Remi Pommarel authored
ACS (auto PAD/FCS stripping) removes FCS off 802.3 packets (LLC) so that there is no need to manually strip it for such packets. The enhanced DMA descriptors allow to flag LLC packets so that the receiving callback can use that to strip FCS manually or not. On the other hand, normal descriptors do not support that. Thus in order to not truncate LLC packet ACS should be disabled when using normal DMA descriptors. Fixes: 47dd7a54 ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by:
Remi Pommarel <repk@triplefau.lt> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzbot found an interesting case of the kernel reading an uninit-value [1] Problem is in the handling of ETH_P_WCCP in gre_parse_header() We look at the byte following GRE options to eventually decide if the options are four bytes longer. Use skb_header_pointer() to not pull bytes if we found that no more bytes were needed. All callers of gre_parse_header() are properly using pskb_may_pull() anyway before proceeding to next header. [1] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2303 [inline] BUG: KMSAN: uninit-value in __iptunnel_pull_header+0x30c/0xbd0 net/ipv4/ip_tunnel_core.c:94 CPU: 1 PID: 11784 Comm: syz-executor940 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 pskb_may_pull include/linux/skbuff.h:2303 [inline] __iptunnel_pull_header+0x30c/0xbd0 net/ipv4/ip_tunnel_core.c:94 iptunnel_pull_header include/net/ip_tunnels.h:411 [inline] gre_rcv+0x15e/0x19c0 net/ipv6/ip6_gre.c:606 ip6_protocol_deliver_rcu+0x181b/0x22c0 net/ipv6/ip6_input.c:432 ip6_input_finish net/ipv6/ip6_input.c:473 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ip6_input net/ipv6/ip6_input.c:482 [inline] ip6_mc_input+0xdf2/0x1460 net/ipv6/ip6_input.c:576 dst_input include/net/dst.h:442 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ipv6_rcv+0x683/0x710 net/ipv6/ip6_input.c:306 __netif_receive_skb_one_core net/core/dev.c:5198 [inline] __netif_receive_skb net/core/dev.c:5312 [inline] netif_receive_skb_internal net/core/dev.c:5402 [inline] netif_receive_skb+0x66b/0xf20 net/core/dev.c:5461 tun_rx_batched include/linux/skbuff.h:4321 [inline] tun_get_user+0x6aef/0x6f60 drivers/net/tun.c:1997 tun_chr_write_iter+0x1f2/0x360 drivers/net/tun.c:2026 call_write_iter include/linux/fs.h:1901 [inline] new_sync_write fs/read_write.c:483 [inline] __vfs_write+0xa5a/0xca0 fs/read_write.c:496 vfs_write+0x44a/0x8f0 fs/read_write.c:558 ksys_write+0x267/0x450 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __ia32_sys_write+0xdb/0x120 fs/read_write.c:620 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f62d99 Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 002b:00000000fffedb2c EFLAGS: 00000217 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020002580 RDX: 0000000000000fca RSI: 0000000000000036 RDI: 0000000000000004 RBP: 0000000000008914 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2793 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1051 [inline] alloc_skb_with_frags+0x18c/0xa70 net/core/skbuff.c:5766 sock_alloc_send_pskb+0xada/0xc60 net/core/sock.c:2242 tun_alloc_skb drivers/net/tun.c:1529 [inline] tun_get_user+0x10ae/0x6f60 drivers/net/tun.c:1843 tun_chr_write_iter+0x1f2/0x360 drivers/net/tun.c:2026 call_write_iter include/linux/fs.h:1901 [inline] new_sync_write fs/read_write.c:483 [inline] __vfs_write+0xa5a/0xca0 fs/read_write.c:496 vfs_write+0x44a/0x8f0 fs/read_write.c:558 ksys_write+0x267/0x450 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __ia32_sys_write+0xdb/0x120 fs/read_write.c:620 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 Fixes: 95f5c64c ("gre: Move utility functions to common headers") Fixes: c5441932 ("GRE: Refactor GRE tunneling code.") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Jiri Wiesner authored
There is a problem when ipvlan slaves are created on a master device that is a vmxnet3 device (ipvlan in VMware guests). The vmxnet3 driver does not support unicast address filtering. When an ipvlan device is brought up in ipvlan_open(), the ipvlan driver calls dev_uc_add() to add the hardware address of the vmxnet3 master device to the unicast address list of the master device, phy_dev->uc. This inevitably leads to the vmxnet3 master device being forced into promiscuous mode by __dev_set_rx_mode(). Promiscuous mode is switched on the master despite the fact that there is still only one hardware address that the master device should use for filtering in order for the ipvlan device to be able to receive packets. The comment above struct net_device describes the uc_promisc member as a "counter, that indicates, that promiscuous mode has been enabled due to the need to listen to additional unicast addresses in a device that does not implement ndo_set_rx_mode()". Moreover, the design of ipvlan guarantees that only the hardware address of a master device, phy_dev->dev_addr, will be used to transmit and receive all packets from its ipvlan slaves. Thus, the unicast address list of the master device should not be modified by ipvlan_open() and ipvlan_stop() in order to make ipvlan a workable option on masters that do not support unicast address filtering. Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver") Reported-by:
Per Sundstrom <per.sundstrom@redqube.se> Signed-off-by:
Jiri Wiesner <jwiesner@suse.com> Reviewed-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
- 07 Mar, 2020 10 commits
-
-
Jonathan Neuschäfer authored
rhashtable_lookup_get_insert_key doesn't have a parameter `data`. It does have a parameter `key`, however. Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jakub Kicinski authored
pkaustub@cisco.com is bouncing, remove it. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Acked-by:
Christian Benvenuti <benve@cisco.com> Signed-off-by:
-
Shannon Nelson authored
These are a couple of read locks that should be write locks. Fixes: fbb39807 ("ionic: support sr-iov operations") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
Similar to commit 38f88c45 ("bonding/alb: properly access headers in bond_alb_xmit()"), we need to make sure arp header was pulled in skb->head before blindly accessing it in rlb_arp_xmit(). Remove arp_pkt() private helper, since it is more readable/obvious to have the following construct back to back : if (!pskb_network_may_pull(skb, sizeof(*arp))) return NULL; arp = (struct arp_pkt *)skb_network_header(skb); syzbot reported : BUG: KMSAN: uninit-value in bond_slave_has_mac_rx include/net/bonding.h:704 [inline] BUG: KMSAN: uninit-value in rlb_arp_xmit drivers/net/bonding/bond_alb.c:662 [inline] BUG: KMSAN: uninit-value in bond_alb_xmit+0x575/0x25e0 drivers/net/bonding/bond_alb.c:1477 CPU: 0 PID: 12743 Comm: syz-executor.4 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 bond_slave_has_mac_rx include/net/bonding.h:704 [inline] rlb_arp_xmit drivers/net/bonding/bond_alb.c:662 [inline] bond_alb_xmit+0x575/0x25e0 drivers/net/bonding/bond_alb.c:1477 __bond_start_xmit drivers/net/bonding/bond_main.c:4257 [inline] bond_start_xmit+0x85d/0x2f70 drivers/net/bonding/bond_main.c:4282 __netdev_start_xmit include/linux/netdevice.h:4524 [inline] netdev_start_xmit include/linux/netdevice.h:4538 [inline] xmit_one net/core/dev.c:3470 [inline] dev_hard_start_xmit+0x531/0xab0 net/core/dev.c:3486 __dev_queue_xmit+0x37de/0x4220 net/core/dev.c:4063 dev_queue_xmit+0x4b/0x60 net/core/dev.c:4096 packet_snd net/packet/af_packet.c:2967 [inline] packet_sendmsg+0x8347/0x93b0 net/packet/af_packet.c:2992 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] __sys_sendto+0xc1b/0xc50 net/socket.c:1998 __do_sys_sendto net/socket.c:2010 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2006 __x64_sys_sendto+0x6e/0x90 net/socket.c:2006 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c479 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc77ffbbc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fc77ffbc6d4 RCX: 000000000045c479 RDX: 000000000000000e RSI: 00000000200004c0 RDI: 0000000000000003 RBP: 000000000076bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000a04 R14: 00000000004cc7b0 R15: 000000000076bf2c Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2793 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1051 [inline] alloc_skb_with_frags+0x18c/0xa70 net/core/skbuff.c:5766 sock_alloc_send_pskb+0xada/0xc60 net/core/sock.c:2242 packet_alloc_skb net/packet/af_packet.c:2815 [inline] packet_snd net/packet/af_packet.c:2910 [inline] packet_sendmsg+0x66a0/0x93b0 net/packet/af_packet.c:2992 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] __sys_sendto+0xc1b/0xc50 net/socket.c:1998 __do_sys_sendto net/socket.c:2010 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2006 __x64_sys_sendto+0x6e/0x90 net/socket.c:2006 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
David S. Miller authored
Madalin Bucur says: ==================== QorIQ DPAA FMan erratum A050385 workaround Changes in v2: - added CONFIG_DPAA_ERRATUM_A050385 - removed unnecessary parenthesis - changed alignment defines to use only decimal values The patch set implements the workaround for FMan erratum A050385: FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak; thus stopping further packet processing. To reproduce this issue when the workaround is not applied, one needs to ensure the FMan DMA transaction queue is already full when a transaction split occurs so the system must be under high traffic load (i.e. multiple ports at line rate). After the errata occurs, the traffic stops. The only SoC impacted by this is the LS1043A, the other ARM DPAA 1 SoC or the PPC DPAA 1 SoCs do not have this erratum. The FMAN internal queue can overflow when FMAN splits single read or write transactions into multiple smaller transactions such that more than 17 AXI transactions are in flight from FMAN to interconnect. When the FMAN internal queue overflows, it can stall further packet processing. The issue can occur with any one of the following three conditions: 1. FMAN AXI transaction crosses 4K address boundary (Errata A010022) 2. FMAN DMA address for an AXI transaction is not 16 byte aligned, i.e. the last 4 bits of an address are non-zero 3. Scatter Gather (SG) frames have more than one SG buffer in the SG list and any one of the buffers, except the last buffer in the SG list has data size that is not a multiple of 16 bytes, i.e., other than 16, 32, 48, 64, etc. With any one of the above three conditions present, there is likelihood of stalled FMAN packet processing, especially under stress with multiple ports injecting line-rate traffic. To avoid situations that stall FMAN packet processing, all of the above three conditions must be avoided; therefore, configure the system with the following rules: 1. Frame buffers must not span a 4KB address boundary, unless the frame start address is 256 byte aligned 2. All FMAN DMA start addresses (for example, BMAN buffer address, FD[address] + FD[offset]) are 16B aligned 3. SG table and buffer addresses are 16B aligned and the size of SG buffers are multiple of 16 bytes, except for the last SG buffer that can be of any size. Additional workaround notes: - Address alignment of 64 bytes is recommended for maximally efficient system bus transactions (although 16 byte alignment is sufficient to avoid the stall condition) - To support frame sizes that are larger than 4K bytes, there are two options: 1. Large single buffer frames that span a 4KB page boundary can be converted into SG frames to avoid transaction splits at the 4KB boundary, 2. Align the large single buffer to 256B address boundaries, ensure that the frame address plus offset is 256B aligned. - If software generated SG frames have buffers that are unaligned and with random non-multiple of 16 byte lengths, before transmitting such frames via FMAN, frames will need to be copied into a new single buffer or multiple buffer SG frame that is compliant with the three rules listed above. ==================== Signed-off-by: -
Madalin Bucur authored
Align buffers, data start, SG fragment length to avoid DMA splits. These changes prevent the A050385 erratum to manifest itself: FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak; thus stopping further packet processing. The FMAN internal queue can overflow when FMAN splits single read or write transactions into multiple smaller transactions such that more than 17 AXI transactions are in flight from FMAN to interconnect. When the FMAN internal queue overflows, it can stall further packet processing. The issue can occur with any one of the following three conditions: 1. FMAN AXI transaction crosses 4K address boundary (Errata A010022) 2. FMAN DMA address for an AXI transaction is not 16 byte aligned, i.e. the last 4 bits of an address are non-zero 3. Scatter Gather (SG) frames have more than one SG buffer in the SG list and any one of the buffers, except the last buffer in the SG list has data size that is not a multiple of 16 bytes, i.e., other than 16, 32, 48, 64, etc. With any one of the above three conditions present, there is likelihood of stalled FMAN packet processing, especially under stress with multiple ports injecting line-rate traffic. To avoid situations that stall FMAN packet processing, all of the above three conditions must be avoided; therefore, configure the system with the following rules: 1. Frame buffers must not span a 4KB address boundary, unless the frame start address is 256 byte aligned 2. All FMAN DMA start addresses (for example, BMAN buffer address, FD[address] + FD[offset]) are 16B aligned 3. SG table and buffer addresses are 16B aligned and the size of SG buffers are multiple of 16 bytes, except for the last SG buffer that can be of any size. Additional workaround notes: - Address alignment of 64 bytes is recommended for maximally efficient system bus transactions (although 16 byte alignment is sufficient to avoid the stall condition) - To support frame sizes that are larger than 4K bytes, there are two options: 1. Large single buffer frames that span a 4KB page boundary can be converted into SG frames to avoid transaction splits at the 4KB boundary, 2. Align the large single buffer to 256B address boundaries, ensure that the frame address plus offset is 256B aligned. - If software generated SG frames have buffers that are unaligned and with random non-multiple of 16 byte lengths, before transmitting such frames via FMAN, frames will need to be copied into a new single buffer or multiple buffer SG frame that is compliant with the three rules listed above. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Madalin Bucur authored
Detect the presence of the A050385 erratum. Signed-off-by:
-
Madalin Bucur authored
The LS1043A SoC is affected by the A050385 erratum stating that FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak thus stopping further packet processing. Signed-off-by:
-
Madalin Bucur authored
FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak; thus stopping further packet processing. The FMAN internal queue can overflow when FMAN splits single read or write transactions into multiple smaller transactions such that more than 17 AXI transactions are in flight from FMAN to interconnect. When the FMAN internal queue overflows, it can stall further packet processing. The issue can occur with any one of the following three conditions: 1. FMAN AXI transaction crosses 4K address boundary (Errata A010022) 2. FMAN DMA address for an AXI transaction is not 16 byte aligned, i.e. the last 4 bits of an address are non-zero 3. Scatter Gather (SG) frames have more than one SG buffer in the SG list and any one of the buffers, except the last buffer in the SG list has data size that is not a multiple of 16 bytes, i.e., other than 16, 32, 48, 64, etc. With any one of the above three conditions present, there is likelihood of stalled FMAN packet processing, especially under stress with multiple ports injecting line-rate traffic. To avoid situations that stall FMAN packet processing, all of the above three conditions must be avoided; therefore, configure the system with the following rules: 1. Frame buffers must not span a 4KB address boundary, unless the frame start address is 256 byte aligned 2. All FMAN DMA start addresses (for example, BMAN buffer address, FD[address] + FD[offset]) are 16B aligned 3. SG table and buffer addresses are 16B aligned and the size of SG buffers are multiple of 16 bytes, except for the last SG buffer that can be of any size. Additional workaround notes: - Address alignment of 64 bytes is recommended for maximally efficient system bus transactions (although 16 byte alignment is sufficient to avoid the stall condition) - To support frame sizes that are larger than 4K bytes, there are two options: 1. Large single buffer frames that span a 4KB page boundary can be converted into SG frames to avoid transaction splits at the 4KB boundary, 2. Align the large single buffer to 256B address boundaries, ensure that the frame address plus offset is 256B aligned. - If software generated SG frames have buffers that are unaligned and with random non-multiple of 16 byte lengths, before transmitting such frames via FMAN, frames will need to be copied into a new single buffer or multiple buffer SG frame that is compliant with the three rules listed above. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Patches to bump position index from sysctl seq_next, from Vasilin Averin. 2) Release flowtable hook from error path, from Florian Westphal. 3) Patches to add missing netlink attribute validation, from Jakub Kicinski. 4) Missing NFTA_CHAIN_FLAGS in nf_tables_fill_chain_info(). 5) Infinite loop in module autoload if extension is not available, from Florian Westphal. 6) Missing module ownership in inet/nat chain type definition. ==================== Signed-off-by:
-
- 06 Mar, 2020 4 commits
-
-
Pablo Neira Ayuso authored
Set owner to THIS_MODULE, otherwise the nft_chain_nat module might be removed while there are still inet/nat chains in place. [ 117.942096] BUG: unable to handle page fault for address: ffffffffa0d5e040 [ 117.942101] #PF: supervisor read access in kernel mode [ 117.942103] #PF: error_code(0x0000) - not-present page [ 117.942106] PGD 200c067 P4D 200c067 PUD 200d063 PMD 3dc909067 PTE 0 [ 117.942113] Oops: 0000 [#1] PREEMPT SMP PTI [ 117.942118] CPU: 3 PID: 27 Comm: kworker/3:0 Not tainted 5.6.0-rc3+ #348 [ 117.942133] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [ 117.942145] RIP: 0010:nf_tables_chain_destroy.isra.0+0x94/0x15a [nf_tables] [ 117.942149] Code: f6 45 54 01 0f 84 d1 00 00 00 80 3b 05 74 44 48 8b 75 e8 48 c7 c7 72 be de a0 e8 56 e6 2d e0 48 8b 45 e8 48 c7 c7 7f be de a0 <48> 8b 30 e8 43 e6 2d e0 48 8b 45 e8 48 8b 40 10 48 85 c0 74 5b 8b [ 117.942152] RSP: 0018:ffffc9000015be10 EFLAGS: 00010292 [ 117.942155] RAX: ffffffffa0d5e040 RBX: ffff88840be87fc2 RCX: 0000000000000007 [ 117.942158] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffffffffa0debe7f [ 117.942160] RBP: ffff888403b54b50 R08: 0000000000001482 R09: 0000000000000004 [ 117.942162] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8883eda7e540 [ 117.942164] R13: dead000000000122 R14: dead000000000100 R15: ffff888403b3db80 [ 117.942167] FS: 0000000000000000(0000) GS:ffff88840e4c0000(0000) knlGS:0000000000000000 [ 117.942169] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 117.942172] CR2: ffffffffa0d5e040 CR3: 00000003e4c52002 CR4: 00000000001606e0 [ 117.942174] Call Trace: [ 117.942188] nf_tables_trans_destroy_work.cold+0xd/0x12 [nf_tables] [ 117.942196] process_one_work+0x1d6/0x3b0 [ 117.942200] worker_thread+0x45/0x3c0 [ 117.942203] ? process_one_work+0x3b0/0x3b0 [ 117.942210] kthread+0x112/0x130 [ 117.942214] ? kthread_create_worker_on_cpu+0x40/0x40 [ 117.942221] ret_from_fork+0x35/0x40 nf_tables_chain_destroy() crashes on module_put() because the module is gone. Fixes: d164385e ("netfilter: nat: add inet family nat support") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Paolo Abeni authored
Currently passive MPTCP socket can skip including the DACK option - if the peer sends data before accept() completes. The above happens because the msk 'can_ack' flag is set only after the accept() call. Such missing DACK option may cause - as per RFC spec - unwanted fallback to TCP. This change addresses the issue using the key material available in the current subflow, if any, to create a suitable dack option when msk ack seq is not yet available. v1 -> v2: - adavance the generated ack after the initial MPC packet Fixes: d22f4988 ("mptcp: process MP_CAPABLE data option") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Dan Carpenter authored
This is similar to commit 674d9de0 ("NFC: Fix possible memory corruption when handling SHDLC I-Frame commands") and commit d7ee81ad ("NFC: nci: Add some bounds checking in nci_hci_cmd_received()") which added range checks on "pipe". The "pipe" variable comes skb->data[0] in nfc_hci_msg_rx_work(). It's in the 0-255 range. We're using it as the array index into the hdev->pipes[] array which has NFC_HCI_MAX_PIPES (128) members. Fixes: 118278f2 ("NFC: hci: Add pipes table to reference them with a tuple {gate, host}") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jiang Lidong authored
When local NET_RX backlog is full due to traffic overrun, peer veth tx_dropped counter increases. At that time, list local veth stats, rx_dropped has double value of peer tx_dropped, even bigger than transmit packets by peer. In NET_RX softirq process, if any packet drop case happens, it increases dev's rx_dropped counter and returns NET_RX_DROP. At veth tx side, it records any error returned from peer netif_rx into local dev tx_dropped counter. In veth get stats process, it puts local dev rx_dropped and peer dev tx_dropped into together as local rx_drpped value. So that it shows double value of real dropped packets number in this case. This patch ignores peer tx_dropped when counting local rx_dropped, since peer tx_dropped is duplicated to local rx_dropped at most cases. Signed-off-by:
Jiang Lidong <jianglidong3@jd.com> Signed-off-by:
-
- 05 Mar, 2020 6 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-2020-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.6 Second set of fixes for v5.6. Only two small fixes this time. iwlwifi * fix another initialisation regression with 3168 devices mt76 * fix memory corruption with too many rx fragments ==================== Signed-off-by:
-
Tom Zhao authored
We now ignore the "completion" event when using tx queue timestamping, and only pay attention to the two (high and low) timestamp events. The NIC will send a pair of timestamp events for every packet transmitted. The current firmware may merge the completion events, and it is possible that future versions may reorder the completion and timestamp events. As such the completion event is not useful. Without this patch in place a merged completion event on a queue with timestamping will cause a "spurious TX completion" error. This affects SFN8000-series adapters. Signed-off-by:
Tom Zhao <tzhao@solarflare.com> Acked-by:
Martin Habets <mhabets@solarflare.com> Signed-off-by:
-
Jian Shen authored
When fibre port supports auto-negotiation, the IMP(Intelligent Management Process) processes the speed of auto-negotiation and the user's speed separately. For below case, the port will get a not link up problem. step 1: disables auto-negotiation and sets speed to A, then the driver's MAC speed will be updated to A. step 2: enables auto-negotiation and MAC gets negotiated speed B, then the driver's MAC speed will be updated to B through querying in periodical task. step 3: MAC gets new negotiated speed A. step 4: disables auto-negotiation and sets speed to B before periodical task query new MAC speed A, the driver will ignore the speed configuration. This patch fixes it by skipping speed and duplex checking when fibre port supports auto-negotiation. Fixes: 22f48e24 ("net: hns3: add autoneg and change speed support for fibre port") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Eric Dumazet authored
Before accessing various fields in IPV4 network header and TCP header, make sure the packet : - Has IP version 4 (ip->version == 4) - Has not a silly network length (ip->ihl >= 5) - Is big enough to hold network and transport headers - Has not a silly TCP header size (th->doff >= sizeof(struct tcphdr) / 4) syzbot reported : BUG: KMSAN: uninit-value in slhc_compress+0x5b9/0x2e60 drivers/net/slip/slhc.c:270 CPU: 0 PID: 11728 Comm: syz-executor231 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 slhc_compress+0x5b9/0x2e60 drivers/net/slip/slhc.c:270 ppp_send_frame drivers/net/ppp/ppp_generic.c:1637 [inline] __ppp_xmit_process+0x1902/0x2970 drivers/net/ppp/ppp_generic.c:1495 ppp_xmit_process+0x147/0x2f0 drivers/net/ppp/ppp_generic.c:1516 ppp_write+0x6bb/0x790 drivers/net/ppp/ppp_generic.c:512 do_loop_readv_writev fs/read_write.c:717 [inline] do_iter_write+0x812/0xdc0 fs/read_write.c:1000 compat_writev+0x2df/0x5a0 fs/read_write.c:1351 do_compat_pwritev64 fs/read_write.c:1400 [inline] __do_compat_sys_pwritev fs/read_write.c:1420 [inline] __se_compat_sys_pwritev fs/read_write.c:1414 [inline] __ia32_compat_sys_pwritev+0x349/0x3f0 fs/read_write.c:1414 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f7cd99 Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 002b:00000000ffdb84ac EFLAGS: 00000217 ORIG_RAX: 000000000000014e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000200001c0 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000040047459 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2793 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1051 [inline] ppp_write+0x115/0x790 drivers/net/ppp/ppp_generic.c:500 do_loop_readv_writev fs/read_write.c:717 [inline] do_iter_write+0x812/0xdc0 fs/read_write.c:1000 compat_writev+0x2df/0x5a0 fs/read_write.c:1351 do_compat_pwritev64 fs/read_write.c:1400 [inline] __do_compat_sys_pwritev fs/read_write.c:1420 [inline] __se_compat_sys_pwritev fs/read_write.c:1414 [inline] __ia32_compat_sys_pwritev+0x349/0x3f0 fs/read_write.c:1414 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 Fixes: b5451d78 ("slip: Move the SLIP drivers") Signed-off-by:
-
Florian Westphal authored
nft will loop forever if the kernel doesn't support an expression: 1. nft_expr_type_get() appends the family specific name to the module list. 2. -EAGAIN is returned to nfnetlink, nfnetlink calls abort path. 3. abort path sets ->done to true and calls request_module for the expression. 4. nfnetlink replays the batch, we end up in nft_expr_type_get() again. 5. nft_expr_type_get attempts to append family-specific name. This one already exists on the list, so we continue 6. nft_expr_type_get adds the generic expression name to the module list. -EAGAIN is returned, nfnetlink calls abort path. 7. abort path encounters the family-specific expression which has 'done' set, so it gets removed. 8. abort path requests the generic expression name, sets done to true. 9. batch is replayed. If the expression could not be loaded, then we will end up back at 1), because the family-specific name got removed and the cycle starts again. Note that userspace can SIGKILL the nft process to stop the cycle, but the desired behaviour is to return an error after the generic expr name fails to load the expression. Fixes: eb014de4 ("netfilter: nf_tables: autoload modules from the abort path") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Pablo Neira Ayuso authored
Missing NFTA_CHAIN_FLAGS netlink attribute when dumping basechain definitions. Fixes: c9626a2c ("netfilter: nf_tables: add hardware offload support") Signed-off-by:
-
- 04 Mar, 2020 14 commits
-
-
Dajun Jin authored
When registers a phy_device successful, should terminate the loop or the phy_device would be registered in other addr. If there are multiple PHYs without reg properties, it will go wrong. Signed-off-by:
Dajun Jin <adajunjin@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Vishal Kulkarni authored
Hardware can support more than 8 queues currently limited by netif_get_num_default_rss_queues(). So, rework and fix checks for max number of queues to allocate. The checks should be based on how many are actually supported by hardware, OR the number of online cpus; whichever is lower. Fixes: 5952dde7 ("cxgb4: set maximal number of default RSS queues") Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>" Signed-off-by:
-
Hauke Mehrtens authored
This should improve the error message when the PHY validate in the MAC driver failed. I ran into this problem multiple times that I put wrong interface values into the device tree and was searching why it is failing with -22 (-EINVAL). This should make it easier to spot the problem. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Acked-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Jonas Gorski authored
719655a1 ("net: phy: Replace phy driver features u32 with link_mode bitmap") was a bit over-eager and also removed the second phy driver's name, resulting in a nasty OOPS on registration: [ 1.319854] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 804dd50c, ra == 804dd4f0 [ 1.330859] Oops[#1]: [ 1.333138] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.22 #0 [ 1.339217] $ 0 : 00000000 00000001 87ca7f00 805c1874 [ 1.344590] $ 4 : 00000000 00000047 00585000 8701f800 [ 1.349965] $ 8 : 8701f800 804f4a5c 00000003 64726976 [ 1.355341] $12 : 00000001 00000000 00000000 00000114 [ 1.360718] $16 : 87ca7f80 00000000 00000000 80639fe4 [ 1.366093] $20 : 00000002 00000000 806441d0 80b90000 [ 1.371470] $24 : 00000000 00000000 [ 1.376847] $28 : 87c1e000 87c1fda0 80b90000 804dd4f0 [ 1.382224] Hi : d1c8f8da [ 1.385180] Lo : 5518a480 [ 1.388182] epc : 804dd50c kset_find_obj+0x3c/0x114 [ 1.393345] ra : 804dd4f0 kset_find_obj+0x20/0x114 [ 1.398530] Status: 10008703 KERNEL EXL IE [ 1.402833] Cause : 00800008 (ExcCode 02) [ 1.406952] BadVA : 00000000 [ 1.409913] PrId : 0002a075 (Broadcom BMIPS4350) [ 1.414745] Modules linked in: [ 1.417895] Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) [ 1.426214] Stack : 87cec000 80630000 80639370 80640658 80640000 80049af4 80639fe4 8063a0d8 [ 1.434816] 8063a0d8 802ef078 00000002 00000000 806441d0 80b90000 8063a0d8 802ef114 [ 1.443417] 87cea0de 87c1fde0 00000000 804de488 87cea000 8063a0d8 8063a0d8 80334e48 [ 1.452018] 80640000 8063984c 80639bf4 00000000 8065de48 00000001 8063a0d8 80334ed0 [ 1.460620] 806441d0 80b90000 80b90000 802ef164 8065dd70 80620000 80b90000 8065de58 [ 1.469222] ... [ 1.471734] Call Trace: [ 1.474255] [<804dd50c>] kset_find_obj+0x3c/0x114 [ 1.479141] [<802ef078>] driver_find+0x1c/0x44 [ 1.483665] [<802ef114>] driver_register+0x74/0x148 [ 1.488719] [<80334e48>] phy_driver_register+0x9c/0xd0 [ 1.493968] [<80334ed0>] phy_drivers_register+0x54/0xe8 [ 1.499345] [<8001061c>] do_one_initcall+0x7c/0x1f4 [ 1.504374] [<80644ed8>] kernel_init_freeable+0x1d4/0x2b4 [ 1.509940] [<804f4e24>] kernel_init+0x10/0xf8 [ 1.514502] [<80018e68>] ret_from_kernel_thread+0x14/0x1c [ 1.520040] Code: 1060000c 02202025 90650000 <90810000> 24630001 14250004 24840001 14a0fffb 90650000 [ 1.530061] [ 1.531698] ---[ end trace d52f1717cd29bdc8 ]--- Fix it by readding the name. Fixes: 719655a1 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jacob Keller authored
The devlink trigger command does not exist. While rewriting the documentation for devlink into the reStructuredText format, documentation for the trigger command was accidentally merged in. This occurred because the author was also working on a potential extension to devlink regions which included this trigger command, and accidentally squashed the documentation incorrectly. Further review eventually settled on using the previously unused "new" command instead of creating a new trigger command. Fix this by removing mention of the trigger command from the documentation. Fixes: 0b0f945f ("devlink: add a file documenting devlink regions", 2020-01-10) Noticed-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jakub Kicinski authored
Add missing attribute validation for tunnel source and destination ports to the netlink policy. Fixes: af308b94 ("netfilter: nf_tables: add tunnel support") Signed-off-by:
-
Jakub Kicinski authored
Add missing attribute validation for NFTA_PAYLOAD_CSUM_FLAGS to the netlink policy. Fixes: 18140969 ("netfilter: nft_payload: layer 4 checksum adjustment for pseudoheader fields") Signed-off-by:
-
Jakub Kicinski authored
Add missing attribute validation for cthelper to the netlink policy. Fixes: 12f7a505 ("netfilter: add user-space connection tracking helper infrastructure") Signed-off-by:
-
Florian Westphal authored
If hook registration fails, the hooks allocated via nft_netdev_hook_alloc need to be freed. We can't change the goto label to 'goto 5' -- while it does fix the memleak it does cause a warning splat from the netfilter core (the hooks were not registered). Fixes: 3f0465a9 ("netfilter: nf_tables: dynamically allocate hooks per net_device in flowtables") Reported-by: syzbot+a2ff6fa45162a5ed4dd3@syzkaller.appspotmail.com Signed-off-by:
-
Vasily Averin authored
If .next function does not change position index, following .show function will repeat output related to current position index. Without patch: # dd if=/proc/net/ip_tables_matches # original file output conntrack conntrack conntrack recent recent icmp udplite udp tcp 0+1 records in 0+1 records out 65 bytes copied, 5.4074e-05 s, 1.2 MB/s # dd if=/proc/net/ip_tables_matches bs=62 skip=1 dd: /proc/net/ip_tables_matches: cannot skip to specified offset cp <<< end of last line tcp <<< and then unexpected whole last line once again 0+1 records in 0+1 records out 7 bytes copied, 0.000102447 s, 68.3 kB/s Cc: stable@vger.kernel.org Fixes: 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
-
Vasily Averin authored
If .next function does not change position index, following .show function will repeat output related to current position index. Without the patch: # dd if=/proc/net/xt_recent/SSH # original file outpt src=127.0.0.4 ttl: 0 last_seen: 6275444819 oldest_pkt: 1 6275444819 src=127.0.0.2 ttl: 0 last_seen: 6275438906 oldest_pkt: 1 6275438906 src=127.0.0.3 ttl: 0 last_seen: 6275441953 oldest_pkt: 1 6275441953 0+1 records in 0+1 records out 204 bytes copied, 6.1332e-05 s, 3.3 MB/s Read after lseek into middle of last line (offset 140 in example below) generates expected end of last line and then unexpected whole last line once again # dd if=/proc/net/xt_recent/SSH bs=140 skip=1 dd: /proc/net/xt_recent/SSH: cannot skip to specified offset 127.0.0.3 ttl: 0 last_seen: 6275441953 oldest_pkt: 1 6275441953 src=127.0.0.3 ttl: 0 last_seen: 6275441953 oldest_pkt: 1 6275441953 0+1 records in 0+1 records out 132 bytes copied, 6.2487e-05 s, 2.1 MB/s Cc: stable@vger.kernel.org Fixes: 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
-
Vasily Averin authored
If .next function does not change position index, following .show function will repeat output related to current position index. Cc: stable@vger.kernel.org Fixes: 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
-
Vasily Averin authored
If .next function does not change position index, following .show function will repeat output related to current position index. Cc: stable@vger.kernel.org Fixes: 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
-
Jonathan Neuschäfer authored
Signed-off-by:
-
- 03 Mar, 2020 3 commits
-
-
Russell King authored
Place phylink_start()/phylink_stop() inside dsa_port_enable() and dsa_port_disable(), which ensures that we call phylink_stop() before tearing down phylink - which is a documented requirement. Failure to do so can cause use-after-free bugs. Fixes: 0e279218 ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by:
-
David S. Miller authored
Hangbin Liu says: ==================== Fix IPv6 peer route update Currently we have two issues for peer route update on IPv6. 1. When update peer route metric, we only updated the local one. 2. If peer address changed, we didn't remove the old one and add new one. The first two patches fixed these issues and the third patch add new tests to cover it. With the fixes and updated test: ]# ./fib_tests.sh IPv6 prefix route tests TEST: Default metric [ OK ] TEST: User specified metric on first device [ OK ] TEST: User specified metric on second device [ OK ] TEST: Delete of address on first device [ OK ] TEST: Modify metric of address [ OK ] TEST: Prefix route removed on link down [ OK ] TEST: Prefix route with metric on link up [ OK ] TEST: Set metric with peer route on local side [ OK ] TEST: User specified metric on local address [ OK ] TEST: Set metric with peer route on peer side [ OK ] TEST: Modify metric with peer route on local side [ OK ] TEST: Modify metric with peer route on peer side [ OK ] IPv4 prefix route tests TEST: Default metric [ OK ] TEST: User specified metric on first device [ OK ] TEST: User specified metric on second device [ OK ] TEST: Delete of address on first device [ OK ] TEST: Modify metric of address [ OK ] TEST: Prefix route removed on link down [ OK ] TEST: Prefix route with metric on link up [ OK ] TEST: Modify metric of .0/24 address [ OK ] TEST: Set metric of address with peer route [ OK ] TEST: Modify metric of address with peer route [ OK ] Tests passed: 22 Tests failed: 0 ==================== Signed-off-by: -
Hangbin Liu authored
This patch update {ipv4, ipv6}_addr_metric_test with 1. Set metric of address with peer route and see if the route added correctly. 2. Modify metric and peer address for peer route and see if the route changed correctly. Signed-off-by:Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
