- 18 Mar, 2013 23 commits
-
-
Paul Bolle authored
Since commit 7543f344 ("[media] m920x: factor out a m920x_write_seq() function") building m920x.o triggers this GCC warning: drivers/media/usb/dvb-usb/m920x.c: In function ‘m920x_probe’: drivers/media/usb/dvb-usb/m920x.c:91:6: warning: ‘ret’ may be used uninitialized in this function [-Wuninitialized] This warning is caused by m920x_write_seq(), which is apparently inlined into m920x_probe(). It is clear why GCC thinks 'ret' may be used uninitialized. But in practice the first seq->address will always be non-zero when this function is called. That means we can change the while()-do{} loop into a do{}-while() loop. And that suffices to make GCC see that 'ret' will not be used uninitialized. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Cesar Eduardo Barros authored
Apparently a copy-paste mistake; the similar sh_vou.h exists, and both were added to MAINTAINERS by commit b618b69c ([media] MAINTAINERS: add entries for sh_veu and sh_vou V4L2 drivers). Signed-off-by:
Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by:
-
Cesar Eduardo Barros authored
That directory never existed. The intention was probably to match CARDLIST.saa7134 and README.saa7134. Signed-off-by:
-
Cesar Eduardo Barros authored
This file was moved to drivers/media/common/ by commit 62595820 ([media] cx2341x: move from media/i2c to media/common). Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Sachin Kamat authored
Some symbols are used only in this file. Make them static. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Sachin Kamat authored
Symbols used only in this file should be made static. Signed-off-by:
-
Sachin Kamat authored
These symbols are used only in this file and can be made static. Signed-off-by:
-
Sachin Kamat authored
Since these symbols are used only in this file, they can be made static. Signed-off-by:
-
Matt Gomboc authored
Thanks for the response, I have done as you suggested. Below is an updated patch for the OTG102 device against http://git.linuxtv.org/hverkuil/media_tree.git/shortlog/refs/heads/cx231xx, kernel version 3.8. With further testing it appears the extra clauses in cx231xx-cards.c were not necessary (in static in cx231xx_init_dev and static int cx231xx_usb_probe), so those have been also been removed. Signed-off-by:
Matt Gomboc <gomboc0@gmail.com> Acked-by:
-
Chen Gang authored
need using ccflags-y instead of EXTRA_CFLAGS can reference scripts/checkpatch.pl (1755..1766) when make EXTRA_CFLAGS=-W, the compiling issue will be occured. Signed-off-by:Chen Gang <gang.chen@asianux.com> Signed-off-by:
-
Eduardo Valentin authored
Add maintainer entry for the files composing si4713 FM transmitter driver. Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by:
Syam Sidhardhan <s.syam@samsung.com> Signed-off-by:
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by:
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by:
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by:
-
Dmitry Torokhov authored
Even if bus is not hot-pluggable, the devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Similarly probe() methods should not be marked __init unless platform_driver_probe() is used. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
Timo Kokkonen <timo.t.kokkonen@iki.fi> Signed-off-by:
-
Antti Palosaari authored
I did what I liked to do. Also corrected two long log writings as checkpatch.pl was complaining about those. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
WARNING: at lib/dma-debug.c:947 check_for_stack+0xa7/0xf0() ehci-pci 0000:00:04.1: DMA-API: device driver maps memory fromstack Reported-by:
poma <pomidorabelisima@gmail.com> Signed-off-by:
-
Antti Palosaari authored
Implement: dvb_usbv2_generic_rw_locked() dvb_usbv2_generic_write_locked() Caller must hold device lock when locked versions are called. Signed-off-by:
-
Syam Sidhardhan authored
This patch fixes the print_buf leaking. Signed-off-by:
-
Syam Sidhardhan authored
Check for (adap == NULL) has to done before accessing adap. Signed-off-by:
-
- 14 Mar, 2013 7 commits
-
-
Ismael Luceno authored
Signed-off-by:
Ismael Luceno <ismael.luceno@corp.bluecherry.net> Signed-off-by:
-
Thiago Farina authored
Signed-off-by:
Thiago Farina <tfarina@chromium.org> Signed-off-by:
-
Igor M. Liplianin authored
Terratec Cinergy S2 USB HD Rev.2 support. This commit is a corrected cherry-pick of 03228792 which got reverted in b7e38636 because it was rebased incorrectly and introduced compilation errors. Signed-off-by:
Stephan Hilb <stephan@ecshi.net> Signed-off-by:
-
Alexey Khoroshilov authored
goto err and goto err_gateoff before mutex_lock(&state->internal->demod_lock) lead to unlock of unheld mutex in stv090x_sleep(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by:
-
Sachin Kamat authored
Fixes the below warning: drivers/media/platform/timblogiw.c:81:31: warning: symbol 'timblogiw_tvnorms' was not declared. Should it be static? Signed-off-by:
-
Fabrizio Gazzato authored
This patch adds USB ID for alternative "Terratec Cinergy T Stick". Tested by a friend: works similarly to 0ccd:0093 version (af9035+tua9001) Signed-off-by:
Fabrizio Gazzato <fabrizio.gazzato@gmail.com> Acked-by:
-
Gianluca Gennari authored
This patch: http://git.linuxtv.org/media_tree.git/commit/b86d15440b683f8634c0cb26fc0861a5bc4913ac is missing a chunk when compared to an older version: https://patchwork.kernel.org/patch/2063281/ probably because of an unresolved merging conflict. This causes the following error: WARNING: "cx231xx_g_chip_ident" [/home/jena/media_build/v4l/cx231xx.ko] undefined! Signed-off-by:
Gianluca Gennari <gennarone@gmail.com> Signed-off-by:
-
- 05 Mar, 2013 10 commits
-
-
Frank Schaefer authored
Like init_bttv_i2c(), fini_bttv_i2c() belongs to bttv-i2c.c. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Frank Schaefer authored
Request module ir-kbd-i2c if an i2c ir decoder is detected. Tested with device "Hauppauge WinTV Theatre" (model 37284 rev B421). Signed-off-by:
-
Fabrizio Gazzato authored
Add USB ID for MaxMedia HU394-T USB DVB-T Multi (FM, DAB, DAB+) dongle (RTL2832U+FC0012) In Italy, is branded as "DIKOM USB-DVBT HD" lsusb: ID 1b80:d394 Afatech Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
The planar YUV422P is quite unusual and few if any applications support it. Instead choose the common YUYV format as the default. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
All fields after 'type' are already zeroed by the core framework. Clearing the full struct also clears 'type', which causes a wrong type value to be returned. Signed-off-by:
-
Hans Verkuil authored
Just set the field value based on the chosen format. It's either INTERLACED or TOP. Signed-off-by:
-
Hans Verkuil authored
Set priv field of struct v4l2_pix_format to 0 and fill in colorspace. Signed-off-by:
-
Hans Verkuil authored
Instead of comparing against STD_NTSC and STD_PAL compare against 60 and 50 Hz formats. That's what you really want. When the standard is changed, make sure the width and height of the format are also updated to reflect the current standard. Also replace the deprecated current_norm by the g_std ioctl. Signed-off-by:
-
