- 27 Nov, 2017 1 commit
-
-
Adam Thomson authored
Current DT binding documentation shows an example where the IRQ for the device is chosen to be ACTIVE_HIGH. This is incorrect as the device only supports ACTIVE_LOW, so this commit fixes that discrepancy. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 16 Nov, 2017 1 commit
-
-
Johan Hovold authored
Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent codec node was also prematurely freed. Fixes: 4d50934a ("ASoC: da7218: Add da7218 codec driver") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable <stable@vger.kernel.org>
-
- 10 Nov, 2017 30 commits
-
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/tfa9879', 'asoc/topic/ts3a277e', 'asoc/topic/wm8741', 'asoc/topic/wm97xx' and 'asoc/topic/zte' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/stm32', 'asoc/topic/sunxi' and 'asoc/topic/tas571x' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/rt5645', 'asoc/topic/rt5651', 'asoc/topic/rt5659', 'asoc/topic/rt5663' and 'asoc/topic/rt5670' into asoc-next
-
Mark Brown authored
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/max98925', 'asoc/topic/max98927', 'asoc/topic/msm8916' and 'asoc/topic/omap' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/hdmi', 'asoc/topic/img' and 'asoc/topic/kirkwood' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/dwc', 'asoc/topic/fallthrough', 'asoc/topic/fsi', 'asoc/topic/fsl' and 'asoc/topic/graph' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/cygnus', 'asoc/topic/da7213', 'asoc/topic/davinci' and 'asoc/topic/doc' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/bcm2835', 'asoc/topic/cs42l56' and 'asoc/topic/cs43130' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/ac97-mfd', 'asoc/topic/amd' and 'asoc/topic/arizona-mfd' into asoc-next
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
ASoC: Fixes for v4.14 I've been quite lax in sending these due to conference season but here's a fairly large collection of ASoC updates. The one thing that's not device specific is Takashi's fix for races between delayed work and PCM destruction, otherwise everything is specific to an individual device. # gpg: Signature made Thu 26 Oct 2017 15:11:23 BST # gpg: using RSA key ADE668AA675718B59FE29FEA24D68B725D5487D0 # gpg: issuer "broonie@kernel.org" # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" [unknown] # gpg: aka "Mark Brown <broonie@debian.org>" [unknown] # gpg: aka "Mark Brown <broonie@kernel.org>" [unknown] # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" [unknown] # gpg: aka "Mark Brown <broonie@linaro.org>" [unknown] # gpg: aka "Mark Brown <Mark.Brown@linaro.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 3F25 68AA C269 98F9 E813 A1C5 C3F4 36CA 30F5 D8EB # Subkey fingerprint: ADE6 68AA 6757 18B5 9FE2 9FEA 24D6 8B72 5D54 87D0
-
Matthias Reichl authored
DSP modes and left/right justified modes can be supported on bcm2835 by configuring the frame sync polarity and frame sync length registers and by adjusting the channel data position registers. Clock and frame sync polarity handling in hw_params has been refactored to make the interaction between logical rising/falling edge frame start and physical configuration (changed by normal/inverted polarity modes) clearer. Modes where the first active data bit is transmitted immediately after frame start (eg DSP mode B with slot 0 active) only work reliable if bcm2835 is configured as frame master. In frame slave mode channel swap (or shift, this isn't quite clear yet) can occur. Currently the driver only warns if an unstable configuration is detected but doensn't prevent using them. Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Matthias Reichl authored
bcm2835's configuration registers can't be changed when a stream is running, which means asymmetric configurations aren't supported. Channel and rate symmetry are already enforced by constraints but samplebits had been missed. As hw_params doesn't check for symmetry constraints by itself and just returns success if a stream is running this led to situations where asymmetric configurations were seeming to succeed but of course didn't work because the hardware wasn't configured at all. Fix this by adding the missing samplerate symmetry constraint. Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Matthias Reichl authored
Sample rates are only restricted by the capabilities of the clock driver, so use SNDRV_PCM_RATE_CONTINUOUS instead of SNDRV_PCM_RATE_8000_192000. Tests (eg with pcm5122) have shown that bcm2835 works fine in 384kHz/32bit stereo mode, so change the maximum allowed rate from 192kHz to 384kHz. Signed-off-by: Matthias Reichl <hias@horus.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Matthias Reichl authored
bcm2835 supports arbitrary positioning of channel data within a frame and thus is capable of supporting TDM modes. Since the driver is limited to 2-channel operations only TDM setups with exactly 2 active slots are supported. Logical TDM slot numbering follows the usual convention: For I2S-like modes, with a 50% duty-cycle frame clock, slots 0, 2, ... are transmitted in the first half of a frame, slots 1, 3, ... are transmitted in the second half. For DSP modes slot numbering is ascending: 0, 1, 2, 3, ... Channel position calculation has been refactored to use TDM info and moved out of hw_params. set_tdm_slot, set_bclk_ratio and hw_params now check more strictly if the configuration is valid. Illegal configurations like odd number of slots in I2S mode, data lengths exceeding slot width or frame sizes larger than the hardware limit of 1024 are rejected. Also hw_params now properly checks for errors from clk_set_rate. Allowed PCM formats are already guarded by stream constraints, thus the formats check in hw_params has been removed and data_length is now retrieved via params_width(). Also standard functions like snd_soc_params_to_bclk are now being used instead of manual calculations to make the code more readable. Special care has been taken to ensure that set_bclk_ratio works as before. The bclk ratio is mapped to a 2-channel TDM config with a slot width of half the ratio. In order to support odd ratios, which can't be expressed via a TDM config, the ratio (frame length) is stored and used by hw_params. Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Add mclk-fs support to audio graph card as it was previously implemented in simple card. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Add mclk-fs support to audio graph card as initially supported in simple card. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Arnd Bergmann authored
The main rt5514 driver optionally calls into the SPI back-end to load the firmware. This causes a link error when one driver selects rt5514 as built-in and another driver selects rt5514-spi as a loadable module: sound/soc/codecs/rt5514.o: In function `rt5514_dsp_voice_wake_up_put': rt5514.c:(.text+0xac8): undefined reference to `rt5514_spi_burst_write' As a workaround, this adds another silent symbol, to force rt5514-spi to be built-in for that configuration. I'm not overly happy with that solution, but couldn't come up with anything better. Using 'IS_REACHABLE()' would break the case that relies on the loadable module, and all other ideas would result in more complexity. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Arnd Bergmann authored
The new functions are only used when CONFIG_PM is enabled, leading to a harmless warning: sound/soc/codecs/rt5514-spi.c:474:12: error: 'rt5514_resume' defined but not used [-Werror=unused-function] sound/soc/codecs/rt5514-spi.c:464:12: error: 'rt5514_suspend' defined but not used [-Werror=unused-function] This marks them as __maybe_unused to make the build silent again. Fixes: 58f1c07d ("ASoC: rt5514: Voice wakeup support.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
-
oder_chiou@realtek.com authored
Check the JD status in the button pushing to prevent the IRQ that is locked by button pushing event while the jack unpluging. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 09 Nov, 2017 7 commits
-
-
Vijendar Mukunda authored
Before rendering starts, DMA driver copies full buffer valid data to ACP SRAM for the first time, after that ACP SRAM to I2S FIFO DMA will be initiated. After rendering first half of ACP SRAM, IOC will be raised then Audio data will be copied from first half of System Memory to first half of ACP SRAM. Similarly after rendering second half of ACP SRAM, IOC will be raised then Audio Data will be copied from second half of the System Memory to second half of the ACP SRAM in ping-pong way till rendering stops. Old design introducing latency issues resulting stutter sound observed during playback. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by: Akshu Agrawal <Akshu.Agrawal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Akshu Agrawal authored
Minimum time required between power On of codec and read of RT5645_VENDOR_ID2 is 400msec. We should wait that long before reading the value. TEST=Cold boot the device and check for sound device. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Andrea Bondavalli authored
32bit and 24bit audio capture formats for H3/H2+ are broken because the RX_SAMPLE_BITS and the RX_FIFO_MODE bits of AC_ADC_FIFOC register of the audio codec are not set to operate in 24bit mode but in 16bit mode only. The following patch sets the H3 audio codec registers and the DMA bus width properly when a 24/32bit capture is requested. Signed-off-by: Andrea Bondavalli <andrea.bondavalli74@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
DSP modes are documented in the data sheet but not enabled in the driver. The work-around already implemented for DA7218/9 is also required to make sure the bit clock handling in DSP modes follows ASoC conventions. Tested with ARD-AUDIO-DA7212 and Minnowmax Turbot boards Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Maxime Ripard authored
The current code might be a bit intriguing without having experienced the issue before, and might come up as a mistake. Make explicit what's going on by adding a comment. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Maxime Ripard authored
While the current code was reporting to be able to work in master mode, it failed to do so because the BCLK divider wasn't programmed, meaning that the BCLK would run at the PLL's frequency no matter the sample rate. It was obviously a bit too fast. Add support to retrieve the divider to use, and set it. Since our PLL is not always able to generate a perfect multiple of the sample rate, we'll have to choose the closest divider that matches our setup. Fixes: 36c68493 ("ASoC: Add sun8i digital audio codec") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
-
Oder Chiou authored
In the probe, the codec may not be ready for I2C reading or there are some glitches on the i2c line. So if the i2c reading value is incorrect, it will read again after delay. This issue is similar the patch https://patchwork.kernel.org/patch/9681421/. In current project, these 2 devices were connected to the same i2c line, and they met the same problem. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 08 Nov, 2017 1 commit
-
-
Guenter Roeck authored
ERROR: "__aeabi_uldivmod" [sound/soc/amd/snd-soc-acp-pcm.ko] undefined! 64-bit divides require special operations to avoid build errors on 32-bit systems. [Reword the commit message to make it clearer - Alex] fixes: 61add814 (ASoC: amd: Report accurate hw_ptr during dma) Signed-off-by: Guenter Roeck <groeck@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/678919Reviewed-by: Jason Clinton <jclinton@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/681618Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-