Pull ARM Device-tree updates from Olof Johansson:
 "As usual, this is where the bulk of our changes end up landing each
  merge window.

  The individual updates are too many to enumerate, many many platforms
  have seen additions of device descriptions such that they are
  functionally more complete (in fact, this is often the bulk of updates
  we see).

  Instead I've mostly focused on highlighting the new platforms below as
  they are introduced. Sometimes the introduction is of mostly a
  fragment, that later gets filled in on later releases, and in some
  cases it's near-complete platform support. The latter is more common
  for derivative platforms that already has similar support in-tree.

  Two SoCs are slight outliers from the usual range of additions.
  Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping
  in the Lychee Pi Nano platform. At the other end is NXP Layerscape
  LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O
  aimed at infrastructure/networking.

  TI updates stick out in the diff stats too, in particular because they
  have moved the description of their L4 on-chip interconnect to
  devicetree, which opens up for removal of even more of their
  platform-specific 'hwmod' description tables over the next few
  releases.

  SoCs:
   - Qualcomm QCS404 (4x Cortex-A53)
   - Allwinner T3 (rebranded R40) and f1c100s (armv5)
   - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4)
   - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72)

  New platforms:
   - Rockchip: Gru Scarlet (RK3188 Tablet)
   - Amlogic: Phicomm N1 (S905D), Libretech S805-AC
   - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708)
   - Qualcomm: QCS404 base platform and EVB
   - Qualcomm: Remove of Arrow SD600
   - PXA: First PXA3xx DT board: Raumfeld
   - Aspeed: Facebook Backpack-CMM BMC
   - Renesas iWave G20D-Q7 (RZ/G1N)
   - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s)
   - Allwinner Emlid Neutis N5, Mapleboard MP130
   - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE)
   - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
   - VF610: Liebherr's BK4 device, ZII SCU4 AIB board
   - i.MX7D PICO Hobbit baseboard
   - i.MX7ULP EVK board
   - NXP LX2160AQDS and LX2160ARDB boards

  Other:
   - Coresight binding updates across the board
   - CPU cooling maps updates across the board"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits)
  ARM: dts: suniv: Fix improper bindings include patch
  ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards
  arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node
  ARM: dts: suniv: Fix improper bindings include patch
  arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
  arm64: dts: Remove unused properties from FSL QSPI driver nodes
  ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
  ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes
  ARM: dts: Remove unused properties from FSL QSPI driver nodes
  arm64: dts: ti: k3-am654: Enable main domain McSPI0
  arm64: dts: ti: k3-am654: Add McSPI DT nodes
  arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes
  arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM
  arm64: dts: ti: k3-am65-main: Add ECAP PWM node
  arm64: dts: ti: k3-am654-base-board: Add I2C nodes
  arm64: dts: ti: am654-base-board: Add pinmux for main uart0
  arm64: dts: ti: k3-am65: Add pinctrl regions
  dt-bindings: pinctrl: k3: Introduce pinmux definitions
  ARM: dts: exynos: Specify I2S assigned clocks in proper node
  ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2
  ...

Pull ARM SoC driver updates from Olof Johansson:
 "Misc driver updates for platforms, many of them power related.

   - Rockchip adds power domain support for rk3066 and rk3188

   - Amlogic adds a power measurement driver

   - Allwinner adds SRAM support for three platforms (F1C100, H5, A64
     C1)

   - Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7

   - Broadcom fixes suspend/resume with Thumb2 kernels, and improves
     stability of a handful of firmware/platform interfaces

   - PXA completes their conversion to dmaengine framework

   - Renesas does a bunch of PM cleanups across many platforms

   - Tegra adds support for suspend/resume on T186/T194, which includes
     some driver cleanups and addition of wake events

   - Tegra also adds a driver for memory controller (EMC) on Tegra2

   - i.MX tweaks power domain bindings, and adds support for i.MX8MQ in
     GPC

   - Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60

  and misc cleanups across several platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
  ARM: at91: add support in soc driver for new SAM9X60
  ARM: at91: add support in soc driver for LPDDR2 SiP
  memory: omap-gpmc: Use of_node_name_eq for node name comparisons
  bus: ti-sysc: Check for no-reset and no-idle flags at the child level
  ARM: OMAP2+: Check also the first dts child for hwmod flags
  soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency
  soc: imx: gpc: Increase GPC_CLK_MAX to 7
  soc: renesas: rcar-sysc: Fix power domain control after system resume
  soc: renesas: rcar-sysc: Merge PM Domain registration and linking
  soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers
  soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B}
  dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
  dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
  dt-bindings: sram: Add Allwinner suniv F1C100s
  soc: sunxi: sram: Add support for the H5 SoC system control
  soc: sunxi: sram: Enable EMAC clock access for H3 variant
  soc: imx: gpcv2: add support for i.MX8MQ SoC
  soc: imx: gpcv2: move register access table to domain data
  soc: imx: gpcv2: prefix i.MX7 specific defines
  dmaengine: pxa: make the filter function internal
  ...

Pull arm SoC platform updates from Olof Johansson:
 "SoC updates, mostly refactorings and cleanups of old legacy platforms,
  but also a few more things:

  New SoC support this release:
   - NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
   - Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core

  Cleanups of various platforms:
   - OMAP1 ams-delta does some GPIO cleanups
   - Davinci removes of at24 platform data
   - Samsung cleans up old wakeup, PM debug and secondary core boot code
   - Renesas moves around config options and PM code to drivers/soc for
     sharing with 64-bit and more consistency
   - i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug
     console setups
   - SoCFPGA adds explicit selection of ARM errata and removes some
     unused code

  This also contains a few patches that I had queued up as fixes for
  4.20 but didn't send in before the release"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
  arm64: dts: renesas: draak: Fix CVBS input
  ARM: omap2: avoid section mismatch warning
  ARM: tegra: avoid section mismatch warning
  ARM: ks8695: fix section mismatch warning
  ARM: pxa: avoid section mismatch warning
  ARM: mmp: fix pxa168_device_usb_phy use on aspenite
  ARM: mmp: fix timer_init calls
  ARM: OMAP1: fix USB configuration for device-only setups
  ARM: OMAP1: add MMC configuration for Palm Tungsten E
  ARM: imx: fix dependencies on imx7ulp
  ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
  MAINTAINERS: add drivers/soc/amlogic/ to amlogic list
  ARM: imx: add initial support for imx7ulp
  ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed
  ARM: dts: Fix OMAP4430 SDP Ethernet startup
  ARM: dts: am335x-pdu001: Fix polarity of card detection input
  ARM: OMAP1: ams-delta: Fix audio permanently muted
  ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
  ARM: davinci: da850-evm: remove unnecessary include
  ...

Merge in fixes here, since the last batch didn't make it in before the
release of 4.20, and we might as well group them with this set of
patches.

* fixes: (822 commits)
  arm64: dts: renesas: draak: Fix CVBS input
  ARM: dts: Fix OMAP4430 SDP Ethernet startup
  ARM: dts: am335x-pdu001: Fix polarity of card detection input
  ARM: OMAP1: ams-delta: Fix audio permanently muted
  ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
  ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
  ARM: imx: update the cpu power up timing setting on i.mx6sx
  Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"
  ARM: dts: imx7d-pico: Describe the Wifi clock
  ARM: dts: realview: Fix some more duplicate regulator nodes
  MAINTAINERS: update entry for MMP platform
  ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt
  MAINTAINERS: mediatek: Update SoC entry
  ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
  + Linux 4.20-rc5
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull tracing updates from Steven Rostedt:

 - Rework of the kprobe/uprobe and synthetic events to consolidate all
   the dynamic event code. This will make changes in the future easier.

 - Partial rewrite of the function graph tracing infrastructure. This
   will allow for multiple users of hooking onto functions to get the
   callback (return) of the function. This is the ground work for having
   kprobes and function graph tracer using one code base.

 - Clean up of the histogram code that will facilitate adding more
   features to the histograms in the future.

 - Addition of str_has_prefix() and a few use cases. There currently is
   a similar function strstart() that is used in a few places, but only
   returns a bool and not a length. These instances will be removed in
   the future to use str_has_prefix() instead.

 - A few other various clean ups as well.

* tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
  tracing: Use the return of str_has_prefix() to remove open coded numbers
  tracing: Have the historgram use the result of str_has_prefix() for len of prefix
  tracing: Use str_has_prefix() instead of using fixed sizes
  tracing: Use str_has_prefix() helper for histogram code
  string.h: Add str_has_prefix() helper function
  tracing: Make function ‘ftrace_exports’ static
  tracing: Simplify printf'ing in seq_print_sym
  tracing: Avoid -Wformat-nonliteral warning
  tracing: Merge seq_print_sym_short() and seq_print_sym_offset()
  tracing: Add hist trigger comments for variable-related fields
  tracing: Remove hist trigger synth_var_refs
  tracing: Use hist trigger's var_ref array to destroy var_refs
  tracing: Remove open-coding of hist trigger var_ref management
  tracing: Use var_refs[] for hist trigger reference checking
  tracing: Change strlen to sizeof for hist trigger static strings
  tracing: Remove unnecessary hist trigger struct field
  tracing: Fix ftrace_graph_get_ret_stack() to use task and not current
  seq_buf: Use size_t for len in seq_buf_puts()
  seq_buf: Make seq_buf_puts() null-terminate the buffer
  arm64: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack
  ...

Pull alpha architecture updates from Matt Turner:
 "A few small changes for alpha as well as the new system call table
  generation support from Firoz Khan"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: Remove some unused variables
  alpha: rtc: simplify alpha_rtc_init
  alpha: Fix a typo on ptrace.h
  alpha: fix spelling mistake QSD_PORT_ACTUVE -> QSD_PORT_ACTIVE
  alpha: generate uapi header and syscall table header files
  alpha: add system call table generation support
  alpha: add __NR_syscalls along with NR_SYSCALLS
  alpha: remove CONFIG_OSF4_COMPAT flag from syscall table
  alpha: move __IGNORE* entries to non uapi header

Pull scheduler fix from Ingo Molnar:
 "This is a revert for a lockup in cgroups-intense workloads - the real
  fixes will come later"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix infinite loop in update_blocked_averages() by reverting a9e7f654

Pull dax fix from Dan Williams:
 "Clean up unnecessary usage of prepare_to_wait_exclusive().

  While I feel a bit silly sending a single-commit pull-request there is
  nothing else queued up for dax this cycle. This change has shipped in
  -next for multiple releases"

* tag 'dax-fix-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: Use non-exclusive wait in wait_entry_unlocked()

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've focused on bug fixes since Pixel devices have
  been shipping with f2fs. Some of them were related to hardware
  encryption support which are actually not an issue in mainline, but
  would be better to merge them in order to avoid potential bugs.

  Enhancements:
   - do GC sub-sections when the section is large
   - add a flag in ioctl(SHUTDOWN) to trigger fsck for QA
   - use kvmalloc() in order to give another chance to avoid ENOMEM

  Bug fixes:
   - fix accessing memory boundaries in a malformed iamge
   - GC gives stale unencrypted block
   - GC counts in large sections
   - detect idle time more precisely
   - block allocation of DIO writes
   - race conditions between write_begin and write_checkpoint
   - allow GCs for node segments via ioctl()

  There are various clean-ups and minor bug fixes as well"

* tag 'f2fs-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (43 commits)
  f2fs: sanity check of xattr entry size
  f2fs: fix use-after-free issue when accessing sbi->stat_info
  f2fs: check PageWriteback flag for ordered case
  f2fs: fix validation of the block count in sanity_check_raw_super
  f2fs: fix missing unlock(sbi->gc_mutex)
  f2fs: fix to dirty inode synchronously
  f2fs: clean up structure extent_node
  f2fs: fix block address for __check_sit_bitmap
  f2fs: fix sbi->extent_list corruption issue
  f2fs: clean up checkpoint flow
  f2fs: flush stale issued discard candidates
  f2fs: correct wrong spelling, issing_*
  f2fs: use kvmalloc, if kmalloc is failed
  f2fs: remove redundant comment of unused wio_mutex
  f2fs: fix to reorder set_page_dirty and wait_on_page_writeback
  f2fs: clear PG_writeback if IPU failed
  f2fs: add an ioctl() to explicitly trigger fsck later
  f2fs: avoid frequent costly fsck triggers
  f2fs: fix m_may_create to make OPU DIO write correctly
  f2fs: fix to update new block address correctly for OPU
  ...

Zhipeng Xie, Xie XiuQi and Sargun Dhillon reported lockups in the
scheduler under high loads, starting at around the v4.18 time frame,
and Zhipeng Xie tracked it down to bugs in the rq->leaf_cfs_rq_list
manipulation.

Do a (manual) revert of:

  a9e7f654 ("sched/fair: Fix O(nr_cgroups) in load balance path")

It turns out that the list_del_leaf_cfs_rq() introduced by this commit
is a surprising property that was not considered in followup commits
such as:

  9c2791f9 ("sched/fair: Fix hierarchical order in rq->leaf_cfs_rq_list")

As Vincent Guittot explains:

 "I think that there is a bigger problem with commit a9e7f654 and
  cfs_rq throttling:

  Let take the example of the following topology TG2 --> TG1 --> root:

   1) The 1st time a task is enqueued, we will add TG2 cfs_rq then TG1
      cfs_rq to leaf_cfs_rq_list and we are sure to do the whole branch in
      one path because it has never been used and can't be throttled so
      tmp_alone_branch will point to leaf_cfs_rq_list at the end.

   2) Then TG1 is throttled

   3) and we add TG3 as a new child of TG1.

   4) The 1st enqueue of a task on TG3 will add TG3 cfs_rq just before TG1
      cfs_rq and tmp_alone_branch will stay  on rq->leaf_cfs_rq_list.

  With commit a9e7f654, we can del a cfs_rq from rq->leaf_cfs_rq_list.
  So if the load of TG1 cfs_rq becomes NULL before step 2) above, TG1
  cfs_rq is removed from the list.
  Then at step 4), TG3 cfs_rq is added at the beginning of rq->leaf_cfs_rq_list
  but tmp_alone_branch still points to TG3 cfs_rq because its throttled
  parent can't be enqueued when the lock is released.
  tmp_alone_branch doesn't point to rq->leaf_cfs_rq_list whereas it should.

  So if TG3 cfs_rq is removed or destroyed before tmp_alone_branch
  points on another TG cfs_rq, the next TG cfs_rq that will be added,
  will be linked outside rq->leaf_cfs_rq_list - which is bad.

  In addition, we can break the ordering of the cfs_rq in
  rq->leaf_cfs_rq_list but this ordering is used to update and
  propagate the update from leaf down to root."

Instead of trying to work through all these cases and trying to reproduce
the very high loads that produced the lockup to begin with, simplify
the code temporarily by reverting a9e7f654 - which change was clearly
not thought through completely.

This (hopefully) gives us a kernel that doesn't lock up so people
can continue to enjoy their holidays without worrying about regressions. ;-)

[ mingo: Wrote changelog, fixed weird spelling in code comment while at it. ]
Analyzed-by: Xie XiuQi <xiexiuqi@huawei.com>
Analyzed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reported-by: Zhipeng Xie <xiezhipeng1@huawei.com>
Reported-by: Sargun Dhillon <sargun@sargun.me>
Reported-by: Xie XiuQi <xiexiuqi@huawei.com>
Tested-by: Zhipeng Xie <xiezhipeng1@huawei.com>
Tested-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: <stable@vger.kernel.org> # v4.13+
Cc: Bin Li <huawei.libin@huawei.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: a9e7f654 ("sched/fair: Fix O(nr_cgroups) in load balance path")
Link: http://lkml.kernel.org/r/1545879866-27809-1-git-send-email-xiexiuqi@huawei.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull Kconfig file consolidation from Masahiro Yamada:
 "Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by
  Christoph Hellwig.

  Currently, every architecture that wants to provide common peripheral
  busses needs to add some boilerplate code and include the right
  Kconfig files. This series instead just selects the presence (when
  needed) and then handles everything in the bus-specific Kconfig file
  under drivers/"

* tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  pcmcia: remove per-arch PCMCIA config entry
  eisa: consolidate EISA Kconfig entry in drivers/eisa
  rapidio: consolidate RAPIDIO config entry in drivers/rapidio
  pcmcia: allow PCMCIA support independent of the architecture
  PCI: consolidate the PCI_SYSCALL symbol
  PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options
  PCI: consolidate PCI config entry in drivers/pci
  MIPS: remove the HT_PCI config option

Pull Kconfig updates from Masahiro Yamada:

 - support -y option for merge_config.sh to avoid downgrading =y to =m

 - remove S_OTHER symbol type, and touch include/config/*.h files correctly

 - fix file name and line number in lexer warnings

 - fix memory leak when EOF is encountered in quotation

 - resolve all shift/reduce conflicts of the parser

 - warn no new line at end of file

 - make 'source' statement more strict to take only string literal

 - rewrite the lexer and remove the keyword lookup table

 - convert to SPDX License Identifier

 - compile C files independently instead of including them from zconf.y

 - fix various warnings of gconfig

 - misc cleanups

* tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
  kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning
  kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings
  kconfig: add static qualifiers to fix gconf warnings
  kconfig: split the lexer out of zconf.y
  kconfig: split some C files out of zconf.y
  kconfig: convert to SPDX License Identifier
  kconfig: remove keyword lookup table entirely
  kconfig: update current_pos in the second lexer
  kconfig: switch to ASSIGN_VAL state in the second lexer
  kconfig: stop associating kconf_id with yylval
  kconfig: refactor end token rules
  kconfig: stop supporting '.' and '/' in unquoted words
  treewide: surround Kconfig file paths with double quotes
  microblaze: surround string default in Kconfig with double quotes
  kconfig: use T_WORD instead of T_VARIABLE for variables
  kconfig: use specific tokens instead of T_ASSIGN for assignments
  kconfig: refactor scanning and parsing "option" properties
  kconfig: use distinct tokens for type and default properties
  kconfig: remove redundant token defines
  kconfig: rename depends_list to comment_option_list
  ...

Pull Kbuild updates from Masahiro Yamada:
 "Kbuild core:
   - remove unneeded $(call cc-option,...) switches
   - consolidate Clang compiler flags into CLANG_FLAGS
   - announce the deprecation of SUBDIRS
   - fix single target build for external module
   - simplify the dependencies of 'prepare' stage targets
   - allow fixdep to directly write to .*.cmd files
   - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS
   - change if_changed_rule to accept multi-line recipe
   - move .SECONDARY special target to scripts/Kbuild.include
   - remove redundant 'set -e'
   - improve parallel execution for CONFIG_HEADERS_CHECK
   - misc cleanups

  Treewide fixes and cleanups
   - set Clang flags correctly for PowerPC boot images
   - fix UML build error with CONFIG_GCC_PLUGINS
   - remove unneeded patterns from .gitignore files
   - refactor firmware/Makefile
   - remove unneeded rules for *offsets.s
   - avoid unneeded regeneration of intermediate .s files
   - clean up ./Kbuild

  Modpost:
   - remove unused -M, -K options
   - fix false positive warnings about section mismatch
   - use simple devtable lookup instead of linker magic
   - misc cleanups

  Coccinelle:
   - relax boolinit.cocci checks for overall consistency
   - fix warning messages of boolinit.cocci

  Other tools:
   - improve -dirty check of scripts/setlocalversion
   - add a tool to generate compile_commands.json from .*.cmd files"

* tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
  kbuild: remove unused cmd_gentimeconst
  kbuild: remove $(obj)/ prefixes in ./Kbuild
  treewide: add intermediate .s files to targets
  treewide: remove explicit rules for *offsets.s
  firmware: refactor firmware/Makefile
  firmware: remove unnecessary patterns from .gitignore
  scripts: remove unnecessary ihex2fw and check-lc_ctypes from .gitignore
  um: remove unused filechk_gen_header in Makefile
  scripts: add a tool to produce a compile_commands.json file
  kbuild: add -Werror=implicit-int flag unconditionally
  kbuild: add -Werror=strict-prototypes flag unconditionally
  kbuild: add -fno-PIE flag unconditionally
  scripts: coccinelle: Correct warning message
  scripts: coccinelle: only suggest true/false in files that already use them
  kbuild: handle part-of-module correctly for *.ll and *.symtypes
  kbuild: refactor part-of-module
  kbuild: refactor quiet_modtag
  kbuild: remove redundant quiet_modtag for $(obj-m)
  kbuild: refactor Makefile.asm-generic
  user/Makefile: Fix typo and capitalization in comment section
  ...

gen_crc64table requires linux include files to be installed in
/usr/include/linux.  This is a new requrement so hosts that could
previously build the kernel, now cannot.

gen_crc64table makes this requirement by including <linux/swab.h>, but
nothing from that header is actaully used.

So remove the #include, so that the linux headers no longer need to be
installed.

Fixes: feba04fd ("lib: add crc64 calculation routines")
Signed-off-by: NeilBrown <neil@brown.name>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull documentation update from Jonathan Corbet:
 "A fairly normal cycle for documentation stuff. We have a new document
  on perf security, more Italian translations, more improvements to the
  memory-management docs, improvements to the pathname lookup
  documentation, and the usual array of smaller fixes.

  As is often the case, there are a few reaches outside of
  Documentation/ to adjust kerneldoc comments"

* tag 'docs-5.0' of git://git.lwn.net/linux: (38 commits)
  docs: improve pathname-lookup document structure
  configfs: fix wrong name of struct in documentation
  docs/mm-api: link slab_common.c to "The Slab Cache" section
  slab: make kmem_cache_create{_usercopy} description proper kernel-doc
  doc:process: add links where missing
  docs/core-api: make mm-api.rst more structured
  x86, boot: documentation whitespace fixup
  Documentation: devres: note checking needs when converting
  doc:it: add some process/* translations
  doc:it: fixes in process/1.Intro
  Documentation: convert path-lookup from markdown to resturctured text
  Documentation/admin-guide: update admin-guide index.rst
  Documentation/admin-guide: introduce perf-security.rst file
  scripts/kernel-doc: Fix struct and struct field attribute processing
  Documentation: dev-tools: Fix typos in index.rst
  Correct gen_init_cpio tool's documentation
  Document /proc/pid PID reuse behavior
  Documentation: update path-lookup.md for parallel lookups
  Documentation: Use "while" instead of "whilst"
  dmaengine: Add mailing list address to the documentation
  ...

Pull cgroup updates from Tejun Heo:

 - Waiman's cgroup2 cpuset support has been finally merged closing one
   of the last remaining feature gaps.

 - cgroup.procs could show non-leader threads when cgroup2 threaded mode
   was used in certain ways. I forgot to push the fix during the last
   cycle.

 - A patch to fix mount option parsing when all mount options have been
   consumed by someone else (LSM).

 - cgroup_no_v1 boot param can now block named cgroup1 hierarchies too.

* 'for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Add named hierarchy disabling to cgroup_no_v1 boot param
  cgroup: fix parsing empty mount option string
  cpuset: Remove set but not used variable 'cs'
  cgroup: fix CSS_TASK_ITER_PROCS
  cgroup: Add .__DEBUG__. prefix to debug file names
  cpuset: Minor cgroup2 interface updates
  cpuset: Expose cpuset.cpus.subpartitions with cgroup_debug
  cpuset: Add documentation about the new "cpuset.sched.partition" flag
  cpuset: Use descriptive text when reading/writing cpuset.sched.partition
  cpuset: Expose cpus.effective and mems.effective on cgroup v2 root
  cpuset: Make generate_sched_domains() work with partition
  cpuset: Make CPU hotplug work with partition
  cpuset: Track cpusets that use parent's effective_cpus
  cpuset: Add an error state to cpuset.sched.partition
  cpuset: Add new v2 cpuset.sched.partition flag
  cpuset: Simply allocation and freeing of cpumasks
  cpuset: Define data structures to support scheduling partition
  cpuset: Enable cpuset controller in default hierarchy
  cgroup: remove unnecessary unlikely()

Pull percpu update from Dennis Zhou:
 "Michael Cree noted generic UP Alpha has been broken since v3.18. This
  is a small fix for locking in UP percpu code that fixes the issue"

* 'for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu: convert spin_lock_irq to spin_lock_irqsave.

Pull Xtensa updates from Max Filippov:

 - switch to generated syscall table

 - switch ptrace to regsets, use regsets for core dumps

 - complete tracehook implementation

 - add syscall tracepoints support

 - add jumplabels support

 - add memtest support

 - drop unused/duplicated code from entry.S, ptrace.c, coprocessor.S,
   elf.h and syscall.h

 - clean up warnings caused by WSR/RSR macros

 - clean up DTC warnings about SPI controller node names in xtfpga.dtsi

 - simplify coprocessor.S

 - get rid of explicit 'l32r' instruction usage in assembly

* tag 'xtensa-20181228' of git://github.com/jcmvbkbc/linux-xtensa: (25 commits)
  xtensa: implement jump_label support
  xtensa: implement syscall tracepoints
  xtensa: implement tracehook functions and enable HAVE_ARCH_TRACEHOOK
  xtensa: enable CORE_DUMP_USE_REGSET
  xtensa: implement TIE regset
  xtensa: implement task_user_regset_view
  xtensa: call do_syscall_trace_{enter,leave} selectively
  xtensa: use NO_SYSCALL instead of -1
  xtensa: define syscall_get_arch()
  Move EM_XTENSA to uapi/linux/elf-em.h
  xtensa: support memtest
  xtensa: don't use l32r opcode directly
  xtensa: xtfpga.dtsi: fix dtc warnings about SPI
  xtensa: don't clear cpenable unconditionally on release
  xtensa: simplify coprocessor.S
  xtensa: clean up WSR*/RSR*/get_sr/set_sr
  xtensa: drop unused declarations from elf.h
  xtensa: clean up syscall.h
  xtensa: drop unused coprocessor helper functions
  xtensa: drop custom PTRACE_{PEEK,POKE}{TEXT,DATA}
  ...

Pull nds32 updates from Greentime Hu:

 - Perf support

 - Power management support

 - FPU support

 - Hardware prefetcher support

 - Build error fixed

 - Performance enhancement

* tag 'nds32-for-linus-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
  nds32: support hardware prefetcher
  nds32: Fix the items of hwcap_str ordering issue.
  math-emu/soft-fp.h: (_FP_ROUND_ZERO) cast 0 to void to fix warning
  math-emu/op-2.h: Use statement expressions to prevent negative constant shift
  nds32: support denormalized result through FP emulator
  nds32: Support FP emulation
  nds32: nds32 FPU port
  nds32: Remove duplicated include from pm.c
  nds32: Power management for nds32
  nds32: Add document for NDS32 PMU.
  nds32: Add perf call-graph support.
  nds32: Perf porting
  nds32: Fix bug in bitfield.h
  nds32: Fix gcc 8.0 compiler option incompatible.
  nds32: Fill all TLB entries with kernel image mapping
  nds32: Remove the redundant assignment

Merge tag 'linux-kselftest-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:

 - fixes and improvements to the framework, and individual tests

 - a new media test for IR encoders from Sean Young

 - a new watchdog test option to find time left on a timer

* tag 'linux-kselftest-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: Fix test errors related to lib.mk khdr target
  fix dma-buf/udmabuf selftest
  selftests: watchdog: fix spelling mistake "experies" -> "expires"
  selftests: watchdog: Add gettimeleft command line arg
  selftests: do not macro-expand failed assertion expressions
  selftests/ftrace: Fix invalid SPDX identifiers
  selftests: gpio: Find libmount with pkg-config if available
  selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config
  selftests: firmware: remove use of non-standard diff -Z option
  media: rc: self test for IR encoders and decoders

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char and misc driver patches for 4.21-rc1.

  Lots of different types of driver things in here, as this tree seems
  to be the "collection of various driver subsystems not big enough to
  have their own git tree" lately.

  Anyway, some highlights of the changes in here:

   - binderfs: is it a rule that all driver subsystems will eventually
     grow to have their own filesystem? Binder now has one to handle the
     use of it in containerized systems.

     This was discussed at the Plumbers conference a few months ago and
     knocked into mergable shape very fast by Christian Brauner. Who
     also has signed up to be another binder maintainer, showing a
     distinct lack of good judgement :)

   - binder updates and fixes

   - mei driver updates

   - fpga driver updates and additions

   - thunderbolt driver updates

   - soundwire driver updates

   - extcon driver updates

   - nvmem driver updates

   - hyper-v driver updates

   - coresight driver updates

   - pvpanic driver additions and reworking for more device support

   - lp driver updates. Yes really, it's _finally_ moved to the proper
     parallal port driver model, something I never thought I would see
     happen. Good stuff.

   - other tiny driver updates and fixes.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (116 commits)
  MAINTAINERS: add another Android binder maintainer
  intel_th: msu: Fix an off-by-one in attribute store
  stm class: Add a reference to the SyS-T document
  stm class: Fix a module refcount leak in policy creation error path
  char: lp: use new parport device model
  char: lp: properly count the lp devices
  char: lp: use first unused lp number while registering
  char: lp: detach the device when parallel port is removed
  char: lp: introduce list to save port number
  bus: qcom: remove duplicated include from qcom-ebi2.c
  VMCI: Use memdup_user() rather than duplicating its implementation
  char/rtc: Use of_node_name_eq for node name comparisons
  misc: mic: fix a DMA pool free failure
  ptp: fix an IS_ERR() vs NULL check
  genwqe: Fix size check
  binder: implement binderfs
  binder: fix use-after-free due to ksys_close() during fdget()
  bus: fsl-mc: remove duplicated include files
  bus: fsl-mc: explicitly define the fsl_mc_command endianness
  misc: ti-st: make array read_ver_cmd static, shrinks object size
  ...

Merge tag 'driver-core-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core patches for 4.21-rc1.

  It's not really big, just a number of small changes for some reported
  issues, some documentation updates to hopefully make it harder for
  people to abuse the driver model, and some other minor cleanups.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  mm, memory_hotplug: update a comment in unregister_memory()
  component: convert to DEFINE_SHOW_ATTRIBUTE
  sysfs: Disable lockdep for driver bind/unbind files
  driver core: Add missing dev->bus->need_parent_lock checks
  kobject: return error code if writing /sys/.../uevent fails
  driver core: Move async_synchronize_full call
  driver core: platform: Respect return code of platform_device_register_full()
  kref/kobject: Improve documentation
  drivers/base/memory.c: Use DEVICE_ATTR_RO and friends
  driver core: Replace simple_strto{l,ul} by kstrtou{l,ul}
  kernfs: Improve kernfs_notify() poll notification latency
  kobject: Fix warnings in lib/kobject_uevent.c
  kobject: drop unnecessary cast "%llu" for u64
  driver core: fix comments for device_block_probing()
  driver core: Replace simple_strtol by kstrtoint

Pull staging/IIO driver updates from Greg KH:
 "Here is the big staging and iio driver pull request for 4.21-rc1.

  Lots and lots of tiny patches here, nothing major at all. Which is
  good, tiny cleanups is nice to see. No new huge driver removal or
  addition, this release cycle, although there are lots of good IIO
  driver changes, addtions, and movement from staging into the "real"
  part of the kernel, which is always great.

  Full details are in the shortlog, and all of these have been in
  linux-next for a while with no reported issues"

* tag 'staging-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (553 commits)
  staging: mt7621-mmc: Correct spelling mistakes in comments
  staging: wilc1000: fix missing read_write setting when reading data
  mt7621-mmc: char * array declaration might be better as static const
  mt7621-mmc: return statement in void function unnecessary
  mt7621-mmc: Alignment should match open parenthesis
  mt7621-mmc: Removed unnecessary blank lines
  mt7621-mmc: Fix some coding style issues
  staging: android: ashmem: doc: Fix spelling
  staging: rtl8188eu: cleanup brace coding style issues
  staging: rtl8188eu: add spaces around '&' in rtw_mlme_ext.c
  staging: rtl8188eu: change return type of is_basicrate() to bool
  staging: rtl8188eu: simplify null array initializations
  staging: rtl8188eu: change order of declarations to improve readability
  staging: rtl8188eu: make some arrays static in rtw_mlme_ext.c
  staging: rtl8188eu: constify some arrays
  staging: rtl8188eu: convert unsigned char arrays to u8
  staging: rtl8188eu: remove redundant declaration in rtw_mlme_ext.c
  staging: rtl8188eu: remove unused arrays WFD_OUI and WMM_INFO_OUI
  staging: rtl8188eu: remove unnecessary parentheses in rtw_mlme_ext.c
  staging: rtl8188eu: remove unnecessary comments in rtw_mlme_ext.c
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the large TTY/Serial driver set of patches for 4.21-rc1.

  A number of small serial driver changes along with some good tty core
  fixes for long-reported issues with locking. There is also a new
  console font added to the tree, for high-res screens, so that should
  be helpful for many.

  The last patch in the series is a revert of an older one in the tree,
  it came late but it resolves a reported issue that linux-next was
  having for some people.

  Full details are in the shortlog, and all of these, with the exception
  of the revert, have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (85 commits)
  Revert "serial: 8250: Default SERIAL_OF_PLATFORM to SERIAL_8250"
  serial: sccnxp: Allow to use non-standard baud rates
  serial: sccnxp: Adds a delay between sequential read/write cycles
  tty: serial: qcom_geni_serial: Fix UART hang
  tty: serial: qcom_geni_serial: Fix wrap around of TX buffer
  serial: max310x: Fix tx_empty() callback
  dt-bindings: serial: sh-sci: Document r8a774c0 bindings
  dt-bindings: serial: sh-sci: Document r8a774a1 bindings
  Fonts: New Terminus large console font
  dt-bindings: serial: lpuart: add imx8qxp compatible string
  serial: uartps: Fix interrupt mask issue to handle the RX interrupts properly
  serial: uartps: Fix error path when alloc failed
  serial: uartps: Check if the device is a console
  serial: uartps: Add the device_init_wakeup
  tty: serial: samsung: Increase maximum baudrate
  tty: serial: samsung: Properly set flags in autoCTS mode
  tty: Use of_node_name_{eq,prefix} for node name comparisons
  tty/serial: do not free trasnmit buffer page under port lock
  serial: 8250: Rate limit serial port rx interrupts during input overruns
  dt-bindings: serial: 8250: Add rate limit for serial port input overruns
  ...

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver patches for 4.21-rc1.

  All of the usual bits are in here:

  - loads of USB gadget driver updates and additions

  - new device ids

  - phy driver updates

  - xhci reworks and new features

  - typec updates

  Full details are in the shortlog.

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'usb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (142 commits)
  USB: serial: option: add Fibocom NL678 series
  cdc-acm: fix abnormal DATA RX issue for Mediatek Preloader.
  usb: r8a66597: Fix a possible concurrency use-after-free bug in r8a66597_endpoint_disable()
  usb: typec: tcpm: Extend the matching rules on PPS APDO selection
  usb: typec: Improve Alt Mode documentation
  usb: musb: dsps: fix runtime pm for peripheral mode
  usb: musb: dsps: fix otg state machine
  USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays
  usb: renesas_usbhs: add support for RZ/G2E
  usb: ehci-omap: Fix deferred probe for phy handling
  usb: roles: Add a description for the class to Kconfig
  usb: renesas_usbhs: mark PM functions as __maybe_unused
  usb: core: Remove unnecessary memset()
  usb: host: isp1362-hcd: convert to DEFINE_SHOW_ATTRIBUTE
  phy: qcom-qmp: Expose provided clocks to DT
  dt-bindings: phy-qcom-qmp: Move #clock-cells to child
  phy: qcom-qmp: Utilize fully-specified DT registers
  dt-bindings: phy-qcom-qmp: Fix register underspecification
  phy: ti: fix semicolon.cocci warnings
  phy: dphy: Add configuration helpers
  ...

Pull HSI update from Sebastian Reichel:
 "omap-ssi: use DEFINE_SHOW_ATTRIBUTE"

* tag 'hsi-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: omap_ssi: Change to use DEFINE_SHOW_ATTRIBUTE macro

Pull power supply and reset updates from Sebastian Reichel:

 - New core support:
    - battery internal resistance
    - battery OCV capacity lookup table
    - support for custom sysfs attributes

 - Convert all drivers to use power-supply core support for custom sysfs
   attributes

 - bq24190-charger: bq24196 support

 - axp20x-charger: AXP813 support

 - sc27xx-battery: new fuel gauge driver

 - gpio-poweroff: support for specific active and inactive delays

 - Misc fixes

* tag 'for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (53 commits)
  power: supply: bq25890: fix BAT_COMP field definition
  power: supply: gpio-charger: Do not use deprecated POWER_SUPPLY_TYPE_USB_*
  power: supply: ds2781: switch to devm_power_supply_register
  power: supply: ds2780: switch to devm_power_supply_register
  power: supply: ds2781: fix race-condition in bin attribute registration
  power: supply: ds2780: fix race-condition in bin attribute registration
  power: supply: pcf50633: fix race-condition in sysfs registration
  power: supply: charger-manager: fix race-condition in sysfs registration
  power: supply: charger-manager: simplify generation of sysfs attribute group name
  power: supply: bq24257: fix race-condition in sysfs registration
  power: supply: bq24190_charger: fix race-condition in sysfs registration
  power: supply: lp8788: fix race-condition in sysfs registration
  power: supply: ds2781: fix race-condition in sysfs registration
  power: supply: ds2780: fix race-condition in sysfs registration
  power: supply: bq2415x: fix race-condition in sysfs registration
  power: supply: core: add support for custom sysfs attributes
  power: supply: sc27xx: Save last battery capacity
  power: reset: at91-poweroff: move shdwc related data to one structure
  power: supply: sc27xx: Add suspend/resume interfaces
  power: supply: sc27xx: Add fuel gauge low voltage alarm
  ...

Pull Devicetree updates from Rob Herring:
 "The biggest highlight here is the start of using json-schema for DT
  bindings. Being able to validate bindings has been discussed for years
  with little progress.

   - Initial support for DT bindings using json-schema language. This is
     the start of converting DT bindings from free-form text to a
     structured format.

   - Reworking of initrd address initialization. This moves to using the
     phys address instead of virt addr in the DT parsing code. This
     rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary
     rebuilding of lots of files.

   - Fix stale phandle entries in phandle cache

   - DT overlay validation improvements. This exposed several memory
     leak bugs which have been fixed.

   - Use node name and device_type helper functions in DT code

   - Last remaining conversions to using %pOFn printk specifier instead
     of device_node.name directly

   - Create new common RTC binding doc and move all trivial RTC devices
     out of trivial-devices.txt.

   - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra
     PHY, and Xen shared memory

   - Update dtc to upstream version v1.4.7-57-gf267e674d145"

* tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits)
  of: __of_detach_node() - remove node from phandle cache
  of: of_node_get()/of_node_put() nodes held in phandle cache
  gpio-omap.txt: add reg and interrupts properties
  dt-bindings: mrvl,intc: fix a trivial typo
  dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110
  dt-bindings: Convert trivial-devices.txt to json-schema
  dt-bindings: arm: mrvl: amend Browstone compatible string
  dt-bindings: arm: Convert Tegra board/soc bindings to json-schema
  dt-bindings: arm: Convert ZTE board/soc bindings to json-schema
  dt-bindings: arm: Add missing Xilinx boards
  dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema
  dt-bindings: arm: Convert VIA board/soc bindings to json-schema
  dt-bindings: arm: Convert ST STi board/soc bindings to json-schema
  dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema
  dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema
  dt-bindings: arm: Convert QCom board/soc bindings to json-schema
  dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema
  dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema
  dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema
  dt-bindings: arm: Convert Altera board/soc bindings to json-schema
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.21 kernel series.

  Core changes:

   - Some core changes are already in outside of this pull request as
     they came through the regulator tree, most notably
     devm_gpiod_unhinge() that removes devres refcount management from a
     GPIO descriptor. This is needed in subsystems such as regulators
     where the regulator core need to take over the reference counting
     and lifecycle management for a GPIO descriptor.

   - We dropped devm_gpiochip_remove() and devm_gpio_chip_match() as
     nothing needs it. We can bring it back if need be.

   - Add a global TODO so people see where we are going. This helps
     setting the direction now that we are two GPIO maintainers.

   - Handle the MMC CD/WP properties in the device tree core. (The bulk
     of patches activating this code is already merged through the
     MMC/SD tree.)

   - Augment gpiochip_request_own_desc() to pass a flag so we as
     gpiochips can request lines as active low or open drain etc even
     from ourselves.

  New drivers:

   - New driver for Cadence GPIO blocks.

   - New driver for Atmel SAMA5D2 PIOBU GPIO lines.

  Driver improvements:

   - A major refactoring of the PCA953x driver - this driver has been
     around for ages, and is now modernized to reduce code duplication
     that has stacked up and is using regmap to read write and cache
     registers.

   - Intel drivers are now maintained in a separate tree and start with
     a round of cleanups and unifications"

* tag 'gpio-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (99 commits)
  gpio: sama5d2-piobu: Depend on OF_GPIO
  gpio: Add Cadence GPIO driver
  dt-bindings: gpio: Add bindings for Cadence GPIO
  gpiolib-acpi: remove unused variable 'err', cleans up build warning
  gpio: mxs: read pin level directly instead of using .get
  gpio: aspeed: remove duplicated statement
  gpio: add driver for SAMA5D2 PIOBU pins
  dt-bindings: arm: atmel: describe SECUMOD usage as a GPIO controller
  gpio/mmc/of: Respect polarity in the device tree
  dt-bindings: gpio: rcar: Add r8a774c0 (RZ/G2E) support
  memory: omap-gpmc: Get the header of the enum
  ARM: omap1: Fix new user of gpiochip_request_own_desc()
  gpio: pca953x: Add regmap dependency for PCA953x driver
  gpio: raspberrypi-exp: decrease refcount on firmware dt node
  gpiolib: Fix return value of gpio_to_desc() stub if !GPIOLIB
  gpio: pca953x: Restore registers after suspend/resume cycle
  gpio: pca953x: Zap single use of pca953x_read_single()
  gpio: pca953x: Zap ad-hoc reg_output cache
  gpio: pca953x: Zap ad-hoc reg_direction cache
  gpio: pca953x: Perform basic regmap conversion
  ...

Pull more drm updates from Dave Airlie:
 "Daniel collected a couple of pulls after I want on holidays, back for
  a couple of days, so may as well send them out.

  This has exynos and etnaviv work for 4.21.

  exynos:
   - plane alpha and blending configurability

  etnaviv:
   - mostly cleanups in prep for new features"

* tag 'drm-next-2018-12-27' of git://anongit.freedesktop.org/drm/drm:
  drm/etnaviv: remove lastctx member from gpu struct
  drm/etnaviv: replace header include with forward declaration
  drm/etnaviv: remove unnecessary local irq disable
  drm/exynos: fimd: Make pixel blend mode configurable
  drm/exynos: fimd: Make plane alpha configurable
  drm/etnaviv: Replace drm_dev_unref with drm_dev_put
  drm/etnaviv: consolidate hardware fence handling in etnaviv_gpu
  drm/etnaviv: kill active fence tracking

Pull hwmon updates from Guenter Roeck:
 "The big change in this series is for the most part automatic:
  Introducing SENSOR[_DEVICE]_ATTR_{RO,RW,WO} variants and conversion of
  various drivers to use it. This is similar to DEVICE_ATTR variants.

  Other than that, we have

   - Some conversions of S_<PERMS> with octal values, also automated

   - Added support for Hygon Dhyana CPUs to k10temp driver

   - Added support for STLM75 to lm75 driver

   - B57891S0103 to ntc_thermistor

   - Added pm-runtime support to ina3221 driver

   - Support for PowerPC On-Chip Controller (OCC)

   - Various minor bug fices and improvements"

* tag 'hwmon-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (80 commits)
  hwmon: (lm80) fix a missing check of bus read in lm80 probe
  hwmon: (lm80) fix a missing check of the status of SMBus read
  hwmon: (asus_atk0110) Fix debugfs_simple_attr.cocci warnings
  hwmon: (ftsteutates) Use permission specific SENSOR[_DEVICE]_ATTR variants
  hwmon: (fschmd) Use permission specific SENSOR[_DEVICE]_ATTR variants
  hwmon: (emc6w201) Use permission specific SENSOR[_DEVICE]_ATTR variants
  hwmon: (emc2103) Use permission specific SENSOR[_DEVICE]_ATTR variants
  hwmon: (emc1403) Use permission specific SENSOR[_DEVICE]_ATTR variants
  hwmon: (ds620) Use permission specific SENSOR[_DEVICE]_ATTR variants
  hwmon: (ds1621) Use permission specific SENSOR[_DEVICE]_ATTR variants
  hwmon: (dell-smm-hwmon) Use permission specific SENSOR[_DEVICE]_ATTR variants
  hwmon: (da9055-hwmon) Use permission specific SENSOR[_DEVICE]_ATTR variants
  hwmon: (da9052-hwmon) Use permission specific SENSOR[_DEVICE]_ATTR variants
  hwmon: (coretemp) Replace S_<PERMS> with octal values
  hwmon: (asus_atk0110) Replace S_<PERMS> with octal values
  hwmon: (aspeed-pwm-tacho) Use permission specific SENSOR[_DEVICE]_ATTR variants
  hwmon: (applesmc) Replace S_<PERMS> with octal values
  hwmon: (amc6821) Use permission specific SENSOR[_DEVICE]_ATTR variants
  hwmon: (adt7x10) Use permission specific SENSOR[_DEVICE]_ATTR variants
  hwmon: (adt7475) Use permission specific SENSOR[_DEVICE]_ATTR variants
  ...

Pull VFIO updates from Alex Williamson:

 - Replace global vfio-pci lock with per bus lock to allow concurrent
   open and release (Alex Williamson)

 - Declare mdev function as static (Paolo Cretaro)

 - Convert char to u8 in mdev/mtty sample driver (Nathan Chancellor)

* tag 'vfio-v4.21-rc1' of git://github.com/awilliam/linux-vfio:
  vfio-mdev/samples: Use u8 instead of char for handle functions
  vfio/mdev: add static modifier to add_mdev_supported_type
  vfio/pci: Parallelize device open and release

Merge misc updates from Andrew Morton:

 - large KASAN update to use arm's "software tag-based mode"

 - a few misc things

 - sh updates

 - ocfs2 updates

 - just about all of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits)
  kernel/fork.c: mark 'stack_vm_area' with __maybe_unused
  memcg, oom: notify on oom killer invocation from the charge path
  mm, swap: fix swapoff with KSM pages
  include/linux/gfp.h: fix typo
  mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm
  hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race
  hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
  memory_hotplug: add missing newlines to debugging output
  mm: remove __hugepage_set_anon_rmap()
  include/linux/vmstat.h: remove unused page state adjustment macro
  mm/page_alloc.c: allow error injection
  mm: migrate: drop unused argument of migrate_page_move_mapping()
  blkdev: avoid migration stalls for blkdev pages
  mm: migrate: provide buffer_migrate_page_norefs()
  mm: migrate: move migrate_page_lock_buffers()
  mm: migrate: lock buffers before migrate_page_move_mapping()
  mm: migration: factor out code to compute expected number of page references
  mm, page_alloc: enable pcpu_drain with zone capability
  kmemleak: add config to select auto scan
  mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init
  ...

Pull MMC updates from Ulf Hansson:
 "This time, this pull request contains changes crossing subsystems and
  archs/platforms, which is mainly because of a bigger modernization of
  moving from legacy GPIO to GPIO descriptors for MMC (by Linus
  Walleij).

  Additionally, once again, I am funneling changes to
  drivers/misc/cardreader/* and drivers/memstick/* through my MMC tree,
  mostly due to that we lack a maintainer for these.

  Summary:

  MMC core:
   - Cleanup BKOPS support
   - Introduce MMC_CAP_SYNC_RUNTIME_PM
   - slot-gpio: Delete legacy slot GPIO handling

  MMC host:
   - alcor: Add new mmc host driver for Alcor Micro PCI based cardreader
   - bcm2835: Several improvements to better recover from errors
   - jz4740: Rework and fixup pre|post_req support
   - mediatek: Add support for SDIO IRQs
   - meson-gx: Improve clock phase management
   - meson-gx: Stop descriptor on errors
   - mmci: Complete the sbc error path by sending a stop command
   - renesas_sdhi/tmio: Fixup reset/resume operations
   - renesas_sdhi: Add support for r8a774c0 and R7S9210
   - renesas_sdhi: Whitelist R8A77990 SDHI
   - renesas_sdhi: Fixup eMMC HS400 compatibility issues for H3 and M3-W
   - rtsx_usb_sdmmc: Re-work card detection/removal support
   - rtsx_usb_sdmmc: Re-work runtime PM support
   - sdhci: Fix timeout loops for some variant drivers
   - sdhci: Improve support for error handling due to failing commands
   - sdhci-acpi/pci: Disable LED control for Intel BYT-based controllers
   - sdhci_am654: Add new SDHCI variant driver to support TI's AM654 SOCs
   - sdhci-of-esdhc: Add support for eMMC HS400 mode
   - sdhci-omap: Fixup reset support
   - sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures
   - sdhci-msm: Fixup sporadic write transfers issues for SDR104/HS200
   - sdhci-msm: Fixup dynamical clock gating issues
   - various: Complete converting all hosts into using slot GPIO descriptors

  Other:
   - Move GPIO mmc platform data for mips/sh/arm to GPIO descriptors
   - Add new Alcor Micro cardreader PCI driver
   - Support runtime power management for memstick rtsx_usb_ms driver
   - Use USB remote wakeups for card detection for rtsx_usb misc driver"

* tag 'mmc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (99 commits)
  mmc: mediatek: Add MMC_CAP_SDIO_IRQ support
  mmc: renesas_sdhi_internal_dmac: Whitelist r8a774c0
  dt-bindings: mmc: renesas_sdhi: Add r8a774c0 support
  mmc: core: Cleanup BKOPS support
  mmc: core: Drop redundant check in mmc_send_hpi_cmd()
  mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929)
  dt-bindings: sdhci-omap: Add note for cpu_thermal
  mmc: sdhci-acpi: Disable LED control for Intel BYT-based controllers
  mmc: sdhci-pci: Disable LED control for Intel BYT-based controllers
  mmc: sdhci: Add quirk to disable LED control
  mmc: mmci: add variant property to set command stop bit
  misc: alcor_pci: fix spelling mistake "invailid" -> "invalid"
  mmc: meson-gx: add signal resampling
  mmc: meson-gx: align default phase on soc vendor tree
  mmc: meson-gx: remove useless lock
  mmc: meson-gx: make sure the descriptor is stopped on errors
  mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver
  dt-bindings: mmc: sdhci-of-arasan: Add deprecated message for AM65
  dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's AM654 SOCs
  mmc: sdhci-msm: avoid unused function warning
  ...

Pull libnvdimm updates from Dan Williams:
 "The vast bulk of this update is the new support for the security
  capabilities of some nvdimms.

  The userspace tooling for this capability is still a work in progress,
  but the changes survive the existing libnvdimm unit tests. The changes
  also pass manual checkout on hardware and the new nfit_test emulation
  of the security capability.

  The touches of the security/keys/ files have received the necessary
  acks from Mimi and David. Those changes were necessary to allow for a
  new generic encrypted-key type, and allow the nvdimm sub-system to
  lookup key material referenced by the libnvdimm-sysfs interface.

  Summary:

   - Add support for the security features of nvdimm devices that
     implement a security model similar to ATA hard drive security. The
     security model supports locking access to the media at
     device-power-loss, to be unlocked with a passphrase, and
     secure-erase (crypto-scramble).

     Unlike the ATA security case where the kernel expects device
     security to be managed in a pre-OS environment, the libnvdimm
     security implementation allows key provisioning and key-operations
     at OS runtime. Keys are managed with the kernel's encrypted-keys
     facility to provide data-at-rest security for the libnvdimm key
     material. The usage model mirrors fscrypt key management, but is
     driven via libnvdimm sysfs.

   - Miscellaneous updates for api usage and comment fixes"

* tag 'libnvdimm-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
  libnvdimm/security: Quiet security operations
  libnvdimm/security: Add documentation for nvdimm security support
  tools/testing/nvdimm: add Intel DSM 1.8 support for nfit_test
  tools/testing/nvdimm: Add overwrite support for nfit_test
  tools/testing/nvdimm: Add test support for Intel nvdimm security DSMs
  acpi/nfit, libnvdimm/security: add Intel DSM 1.8 master passphrase support
  acpi/nfit, libnvdimm/security: Add security DSM overwrite support
  acpi/nfit, libnvdimm: Add support for issue secure erase DSM to Intel nvdimm
  acpi/nfit, libnvdimm: Add enable/update passphrase support for Intel nvdimms
  acpi/nfit, libnvdimm: Add disable passphrase support to Intel nvdimm.
  acpi/nfit, libnvdimm: Add unlock of nvdimm support for Intel DIMMs
  acpi/nfit, libnvdimm: Add freeze security support to Intel nvdimm
  acpi/nfit, libnvdimm: Introduce nvdimm_security_ops
  keys-encrypted: add nvdimm key format type to encrypted keys
  keys: Export lookup_user_key to external users
  acpi/nfit, libnvdimm: Store dimm id as a member to struct nvdimm
  libnvdimm, namespace: Replace kmemdup() with kstrndup()
  libnvdimm, label: Switch to bitmap_zalloc()
  ACPI/nfit: Adjust annotation for why return 0 if fail to find NFIT at start
  libnvdimm, bus: Check id immediately following ida_simple_get
  ...

Merge tag 'for-4.21/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Eliminate a couple indirect calls from bio-based DM core.

 - Fix DM to allow reads that exceed readahead limits by setting
   io_pages in the backing_dev_info.

 - A couple code cleanups in request-based DM.

 - Fix various DM targets to check for device sector overflow if
   CONFIG_LBDAF is not set.

 - Use u64 instead of sector_t to store iv_offset in DM crypt; sector_t
   isn't large enough on 32bit when CONFIG_LBDAF is not set.

 - Performance fixes to DM's kcopyd and the snapshot target focused on
   limiting memory use and workqueue stalls.

 - Fix typos in the integrity and writecache targets.

 - Log which algorithm is used for dm-crypt's encryption and
   dm-integrity's hashing.

 - Fix false -EBUSY errors in DM raid target's handling of check/repair
   messages.

 - Fix DM flakey target's corrupt_bio_byte feature to reliably corrupt
   the Nth byte in a bio's payload.

* tag 'for-4.21/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: do not allow readahead to limit IO size
  dm raid: fix false -EBUSY when handling check/repair message
  dm rq: cleanup leftover code from recently removed q->mq_ops branching
  dm verity: log the hash algorithm implementation
  dm crypt: log the encryption algorithm implementation
  dm integrity: fix spelling mistake in workqueue name
  dm flakey: Properly corrupt multi-page bios.
  dm: Check for device sector overflow if CONFIG_LBDAF is not set
  dm crypt: use u64 instead of sector_t to store iv_offset
  dm kcopyd: Fix bug causing workqueue stalls
  dm snapshot: Fix excessive memory usage and workqueue stalls
  dm bufio: update comment in dm-bufio.c
  dm writecache: fix typo in error msg for creating writecache_flush_thread
  dm: remove indirect calls from __send_changing_extent_only()
  dm mpath: only flush workqueue when needed
  dm rq: remove unused arguments from rq_completed()
  dm: avoid indirect call in __dm_make_request

Pull rdma updates from Jason Gunthorpe:
 "This has been a fairly typical cycle, with the usual sorts of driver
  updates. Several series continue to come through which improve and
  modernize various parts of the core code, and we finally are starting
  to get the uAPI command interface cleaned up.

   - Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4,
     mlx5, qib, rxe, usnic

   - Rework the entire syscall flow for uverbs to be able to run over
     ioctl(). Finally getting past the historic bad choice to use
     write() for command execution

   - More functional coverage with the mlx5 'devx' user API

   - Start of the HFI1 series for 'TID RDMA'

   - SRQ support in the hns driver

   - Support for new IBTA defined 2x lane widths

   - A big series to consolidate all the driver function pointers into a
     big struct and have drivers provide a 'static const' version of the
     struct instead of open coding initialization

   - New 'advise_mr' uAPI to control device caching/loading of page
     tables

   - Support for inline data in SRPT

   - Modernize how umad uses the driver core and creates cdev's and
     sysfs files

   - First steps toward removing 'uobject' from the view of the drivers"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits)
  RDMA/srpt: Use kmem_cache_free() instead of kfree()
  RDMA/mlx5: Signedness bug in UVERBS_HANDLER()
  IB/uverbs: Signedness bug in UVERBS_HANDLER()
  IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported
  IB/umad: Start using dev_groups of class
  IB/umad: Use class_groups and let core create class file
  IB/umad: Refactor code to use cdev_device_add()
  IB/umad: Avoid destroying device while it is accessed
  IB/umad: Simplify and avoid dynamic allocation of class
  IB/mlx5: Fix wrong error unwind
  IB/mlx4: Remove set but not used variable 'pd'
  RDMA/iwcm: Don't copy past the end of dev_name() string
  IB/mlx5: Fix long EEH recover time with NVMe offloads
  IB/mlx5: Simplify netdev unbinding
  IB/core: Move query port to ioctl
  RDMA/nldev: Expose port_cap_flags2
  IB/core: uverbs copy to struct or zero helper
  IB/rxe: Reuse code which sets port state
  IB/rxe: Make counters thread safe
  IB/mlx5: Use the correct commands for UMEM and UCTX allocation
  ...

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
  megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas.

  Additionally, we have a pile of annotation, unused variable and minor
  updates.

  The big API change is the updates for Christoph's DMA rework which
  include removing the DISABLE_CLUSTERING flag.

  And finally there are a couple of target tree updates"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits)
  scsi: isci: request: mark expected switch fall-through
  scsi: isci: remote_node_context: mark expected switch fall-throughs
  scsi: isci: remote_device: Mark expected switch fall-throughs
  scsi: isci: phy: Mark expected switch fall-through
  scsi: iscsi: Capture iscsi debug messages using tracepoints
  scsi: myrb: Mark expected switch fall-throughs
  scsi: megaraid: fix out-of-bound array accesses
  scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through
  scsi: fcoe: remove set but not used variable 'port'
  scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()
  scsi: smartpqi: fix build warnings
  scsi: smartpqi: update driver version
  scsi: smartpqi: add ofa support
  scsi: smartpqi: increase fw status register read timeout
  scsi: smartpqi: bump driver version
  scsi: smartpqi: add smp_utils support
  scsi: smartpqi: correct lun reset issues
  scsi: smartpqi: correct volume status
  scsi: smartpqi: do not offline disks for transient did no connect conditions
  scsi: smartpqi: allow for larger raid maps
  ...

Pull DMA mapping updates from Christoph Hellwig:
 "A huge update this time, but a lot of that is just consolidating or
  removing code:

   - provide a common DMA_MAPPING_ERROR definition and avoid indirect
     calls for dma_map_* error checking

   - use direct calls for the DMA direct mapping case, avoiding huge
     retpoline overhead for high performance workloads

   - merge the swiotlb dma_map_ops into dma-direct

   - provide a generic remapping DMA consistent allocator for
     architectures that have devices that perform DMA that is not cache
     coherent. Based on the existing arm64 implementation and also used
     for csky now.

   - improve the dma-debug infrastructure, including dynamic allocation
     of entries (Robin Murphy)

   - default to providing chaining scatterlist everywhere, with opt-outs
     for the few architectures (alpha, parisc, most arm32 variants) that
     can't cope with it

   - misc sparc32 dma-related cleanups

   - remove the dma_mark_clean arch hook used by swiotlb on ia64 and
     replace it with the generic noncoherent infrastructure

   - fix the return type of dma_set_max_seg_size (Niklas Söderlund)

   - move the dummy dma ops for not DMA capable devices from arm64 to
     common code (Robin Murphy)

   - ensure dma_alloc_coherent returns zeroed memory to avoid kernel
     data leaks through userspace. We already did this for most common
     architectures, but this ensures we do it everywhere.
     dma_zalloc_coherent has been deprecated and can hopefully be
     removed after -rc1 with a coccinelle script"

* tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits)
  dma-mapping: fix inverted logic in dma_supported
  dma-mapping: deprecate dma_zalloc_coherent
  dma-mapping: zero memory returned from dma_alloc_*
  sparc/iommu: fix ->map_sg return value
  sparc/io-unit: fix ->map_sg return value
  arm64: default to the direct mapping in get_arch_dma_ops
  PCI: Remove unused attr variable in pci_dma_configure
  ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled
  dma-mapping: bypass indirect calls for dma-direct
  vmd: use the proper dma_* APIs instead of direct methods calls
  dma-direct: merge swiotlb_dma_ops into the dma_direct code
  dma-direct: use dma_direct_map_page to implement dma_direct_map_sg
  dma-direct: improve addressability error reporting
  swiotlb: remove dma_mark_clean
  swiotlb: remove SWIOTLB_MAP_ERROR
  ACPI / scan: Refactor _CCA enforcement
  dma-mapping: factor out dummy DMA ops
  dma-mapping: always build the direct mapping code
  dma-mapping: move dma_cache_sync out of line
  dma-mapping: move various slow path functions out of line
  ...

Pull libata updates from Jens Axboe:
 "Here are the libata changes for this merge window. Nothing major in
  here. This contains:

   - GPIO descriptor conversions (Linus Walleij)

   - rcar deferred probing fix (Sergei Shtylyov)"

* tag 'for-4.21/libata-20181221' of git://git.kernel.dk/linux-block:
  sata_rcar: fix deferred probing
  ata: palmld: Introduce state container
  ata: palmld: Convert to GPIO descriptors
  ata: rb532_cf: Convert to use GPIO descriptors
  ata: sata_highbank: Convert to use GPIO descriptors
  ata: pxa: Drop <linux/gpio.h> include