- 18 Dec, 2015 40 commits
-
-
Glen Lee authored
This patch adds struct wilc to host_if_dev and assign wilc to use driver's primary structure in host_if_dev. Signed-off-by:
Glen Lee <glen.lee@atmel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Glen Lee authored
This patch adds new function parameter struct wilc and use it instead of global variable wilc_dev, and pass wilc to the function as well. Signed-off-by:
-
Glen Lee authored
This patch adds new function parameter struct wilc and use it instead of global variable wilc_dev, and pass wilc to the functions as well. Signed-off-by:
-
Glen Lee authored
This patch add new function parameter struct wilc and use it instead of wilc_dev, and pass wilc to the function as well. Signed-off-by:
-
Glen Lee authored
This patch adds new function parameter struct wilc and use it instead of global variable wilc_dev and pass wilc to the function as well. Signed-off-by:
-
Glen Lee authored
This patch adds new function parameter struct wilc and use it instead of wilc_dev. Pass wilc to the function as well. Signed-off-by:
-
Glen Lee authored
This patch adds new function parameter struct wilc to all function pointers of struct wilc_hif_func, and all functions of wilc_sdio.c and wilc_spi.c need to be changed as it's function pointer is changed. Pass wilc in all the functions call as well. The wilc will be passed to functions in linux_wlan_sdio.c and linux_wlan_spi.c to replace with global variable wilc_dev in the next patch. Signed-off-by:
-
Glen Lee authored
This patch passes struct wilc to the functions which use hif_func inside. The function pointers of wilc_hif_func will pass wilc also in the later patch. Pass wilc to the functions if necessary. Flollowings are modified functions. chip_wakeup wilc_chip_sleep_manually chip_allow_sleep wilc_get_chipid wilc_unknown_isr_ext wilc_pllupdate_isr_ext wilc_sleeptimer_isr_ext Signed-off-by:
-
Glen Lee authored
This patch removes PLAT_WMS8304 and it's related codes as well. We will not use this way of supporting other platform. This will be supported if necessary by device tree later. Signed-off-by:
-
Glen Lee authored
This patch removes spi speed control codes. We are not using define SPEED to specify speed of spi, it is not proper way of doing this. It will be provided by the device tree. The following functions and variable are removed. MIN_SPEED, MAX_SPEED, SPEED wilc_spi_set_max_speed wilc_spi_max_bus_speed wilc_spi_default_bus_speed hif_set_max_bus_speed hif_set_default_bus_speed Signed-off-by:
-
Glen Lee authored
This patch removes spi speed control related functions and variable. We cannot get exact clock what we need in this way and it can causes some problem in host side by setting the clock, so remove the codes. Speed control codes in spi also will removed in next patch, so it's ok to remove functions in linux_wlan.c and wilc_wlan.c which also not used anymore. The Following functions and varialbe are removed. MAX_SPEED, sdio_default_speed wilc_bus_set_default_speed wilc_bus_set_max_speed linux_sdio_set_speed linux_sdio_get_speed wilc_sdio_set_max_speed wilc_sdio_set_default_speed Signed-off-by:
-
Greg Kroah-Hartman authored
This was done to handle two large patch sets that conflicted to be merged together without forcing each developer to redo their work. Signed-off-by: -
Arnd Bergmann authored
We want to get rid of all global variables in this driver, and instead pass device structures from one function to another. This changes the linux_wlan.c and wilc_wlan.c to do this for the most part. There are a few exceptions where these functions are themselves called from another part of the driver that does not have an instance pointer at hand. Changing those would be a follow-up step. There are a few other globals that will have to get moved into struct wilc at a later point. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
So far, my patches tried to do equivalent conversions of the existing code. This one goes beyond that by restructuring how the devices get probed. In particular, the spi driver no longer creates the netdev until the device is probed, and I've removed the global wilc_sdio_func and wilc_spi_dev variables in favor of retrieving them from the wilc_dev variable that will eventually get passed through all functions instead of using a global. Signed-off-by:
-
Arnd Bergmann authored
The SPI and SDIO specific code is now separate enough that we just need to restructure the Makefile and Kconfig logic a bit and export a couple of symbols from the common module to have separate bus glue drivers. Signed-off-by:
-
Arnd Bergmann authored
The last remaining user of WILC_SDIO macro checks for the correct time to wait in an interrupt for the PLL to settle. We can replace this with a runtime check and remove both WILC_SDIO and WILC_SPI, as we no longer need conditional compilation based on the hardware type. Signed-off-by:
-
Arnd Bergmann authored
As a preparation for turning the SDIO side of wilc1000 into a separate module, this removes the last direct caller from the core module into the sdio specific portion. All calls to wilc_sdio_enable_interrupt() and wilc_sdio_disable_interrupt() now go through a function pointer in wilc_hif_func. We also change arguments slightly to pass the device, as we are already touching those lines and the change will be needed later to remove the global variables. Signed-off-by:
-
Arnd Bergmann authored
The wilc_hif_spi and wilc_hif_sdio structures are part of the bus specific code, and the generic code should have no knowledge of their addresses. This changes the code to reference them only from the bus specific initialization code, which we can then use to split up the driver into separate modules. Signed-off-by:
-
Arnd Bergmann authored
Whether the SDIO function uses an internal or external interrupt should not be a compiletime decision but be determined at runtime. This changes the code to pass a GPIO number from the init code as early as possible, and leaves just one #ifdef WILC_SDIO_IRQ_GPIO to preserve the previous behavior. All other locations that check for the interrupt method are turned into runtime checks based on the gpio number (>=0) or the interrupt number (>0). Signed-off-by:
-
Arnd Bergmann authored
wilc_create_wiphy tries to get a pointer to a device from the global wilc_sdio_func variable. This is a layering violation and we can use the wilc_dev->dev pointer instead. Signed-off-by:
-
Arnd Bergmann authored
In order to avoid some of the #ifdefs, this passes the io_type and device pointer as an argument to wilc_netdev_init. Signed-off-by:
-
Arnd Bergmann authored
struct wilc has two pointers to store the device, one for sdio_func and one for spi_device. By changing the pointer to a 'struct device', we can simplify the logic and avoid a few #ifdefs. Signed-off-by:
-
Arnd Bergmann authored
The driver interfaces are in linux_wlan_sdio.c and linux_wlan_spi.c, so this is where the init and exit functions should be. Splitting this up enables further cleanups, including eventually allowing both modules to be built together. Signed-off-by:
-
Arnd Bergmann authored
wilc_wlan_inp_t is an unnecessary indirection and requires linux_wlan.c to have knowledge of the specific sdio and spi front-ends. This removes the structure and places io_type directly inside the struct wilc. Signed-off-by:
-
Arnd Bergmann authored
The driver provides an interface for custom power management and detection that is meant to be filled by people customizing the driver. The default implementation of this is empty, and we don't actually want people to have to modify the source code. If anybody needs this, they need to describe the respective hardware specifics using device tree or platform data and make the driver handle this is a more general way. This removes the empty stubs. Signed-off-by:
-
Arnd Bergmann authored
The wilc_wfi_cfgoperations.h header defines the ieee80211_txrx_stypes and cipher_suites variables that are only used in wilc_wfi_cfgoperations.c and should not be shared in a header file. This moves over all that data into the .c file, and also moves all the macro definitions from the file that are also not needed here. Signed-off-by:
-
Arnd Bergmann authored
The linux_wlan.c file uses a set of enums from wilc_wlan_if.h, with the exception of the NO_ENCRYPT that comes from wilc_wfi_cfgoperations.h. The two sets of enums clearly have the same intention but are defined a bit different. To prepare to clean up the ones in wilc_wfi_cfgoperations.h, this first changes over the only other user. Signed-off-by:
-
Arnd Bergmann authored
'extern' declarations belong into a header file rather than a .c file, to ensure that the definition matches the declaration. This moves all declarations into a header file that seems most appropriate for it. Signed-off-by:
-
Arnd Bergmann authored
There are many global symbols in the wilc1000 driver, some of them with names like "DEBUG_LEVEL" or "probe" that are not acceptable for globals in the linux kernel as they may easily conflict with other (equally broken) drivers. This renames all the globals that do not already start with wilc or a variation of that to start with wilc_ and to follow the usual naming conventions. Signed-off-by:
-
Arnd Bergmann authored
All symbols that are only referenced in the file that defines them can be declared 'static' to avoid namespace pollution, to produce better object code, and to make the source more readable. Signed-off-by:
-
Arnd Bergmann authored
A number of symbols in the wilc1000 driver are completely unused and can be removed. This includes two variables that are only written but not read. Signed-off-by:
-
Chaehyun Lim authored
This patch removes host_int_get_rx_power_level function definition and declaration that is defined at host_interface.c and host_interface.h. This function is defined but not used anywhere in this driver so just remove it. Signed-off-by:
Chaehyun Lim <chaehyun.lim@gmail.com> Signed-off-by:
-
Chaehyun Lim authored
This patch removes host_int_get_assoc_req_info function definition and declaration that is defined at host_interface.c and host_interface.h. This function is defined but not used anywhere in this driver so just remove it. Signed-off-by:
-
Chaehyun Lim authored
This patch removes host_int_disconnect_station function definition and declaration that is defined at host_interface.c and host_interface.h. This function is defined but not used anywhere so just remove it. Signed-off-by:
-
Chaehyun Lim authored
This patch removes host_int_get_start_scan_req function definition and declaration that is defined at host_interface.c and host_interface.h. This function is defined but not used anywhere in this driver so just remove it. Signed-off-by:
-
Chaehyun Lim authored
This patch removes host_int_set_start_scan_req function definition and declaration that is defined at host_interface.c and host_interface.h. This function is defined but not used anywhere in this driver so that just remove it. Signed-off-by:
-
Chaehyun Lim authored
This patch removes host_int_get_RSNAConfigPSKPassPhrase function definition and declaration that is defined at host_interface.c and host_interface.h. This function is defined but not used anywhere in this driver so just remove it. Signed-off-by:
-
Chaehyun Lim authored
This patch removes host_int_set_RSNAConfigPSKPassPhrase function definition and declaration that is defined at host_interface.c and host_interface.h. This function is defined but not used anywhere in this driver so just remove it. Signed-off-by:
-
Chaehyun Lim authored
This patch removes host_int_get_pmkid_info function definition and declaration that is defined at host_interface.c and host_interface.h. This function is defined but not used anywhere in this driver so just remove it. Signed-off-by:
-
Chaehyun Lim authored
This patch removes host_int_add_tx_gtk declaration that is defined in host_interface.h file. It can not find any host_int_add_tx_gtk function definition in this driver so just remove it. Signed-off-by:
-
