- 07 Jan, 2020 3 commits
-
-
Boris Brezillon authored
So that bridge drivers have a way to check/reject an atomic operation. The drm_atomic_bridge_chain_check() (which is just a wrapper around the ->atomic_check() hook) is called in place of drm_bridge_chain_mode_fixup() (when ->atomic_check() is not implemented, the core falls back on ->mode_fixup(), so the behavior should stay the same for existing bridge drivers). Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-4-narmstrong@baylibre.com
-
Boris Brezillon authored
This way the drm_bridge_funcs interface is consistent with the rest of the subsystem. The only driver implementing those hooks (analogix DP) is patched too. Signed-off-by:
-
Boris Brezillon authored
One of the last remaining objects to not have its atomic state. This is being motivated by our attempt to support runtime bus-format negotiation between elements of the bridge chain. This patch just paves the road for such a feature by adding a new drm_bridge_state object inheriting from drm_private_obj so we can re-use some of the existing state initialization/tracking logic. Signed-off-by:
-
- 06 Jan, 2020 17 commits
-
-
Claudiu Beznea authored
This reverts commit d2c755e66617620b729041c625a6396c81d1231c ("drm: atmel-hlcdc: enable sys_clk during initalization."). With commit "drm: atmel-hlcdc: enable clock before configuring timing engine" there is no need for this patch. Code is also simpler. Cc: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com> Signed-off-by:Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-7-git-send-email-claudiu.beznea@microchip.com
-
Peter Rosin authored
The intention was to only select a higher pixel-clock rate than the requested, if a slight overclocking would result in a rate significantly closer to the requested rate than if the conservative lower pixel-clock rate is selected. The fixed patch has the logic the other way around and actually prefers the higher frequency. Fix that. Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Claudiu Beznea authored
Changing pixel clock source without having this clock source enabled will block the timing engine and the next operations after (in this case setting ATMEL_HLCDC_CFG(5) settings in atmel_hlcdc_crtc_mode_set_nofb() will fail). It is recomended (although in datasheet this is not present) to actually enabled pixel clock source before doing any changes on timing enginge (only SAM9X60 datasheet specifies that the peripheral clock and pixel clock must be enabled before using LCD controller). Fixes: 1a396789 ("drm: add Atmel HLCDC Display Controller support") Signed-off-by:
-
Claudiu Beznea authored
Doubled system clock should be used as pixel cock source only if this is supported. This is emphasized by the value of atmel_hlcdc_crtc::dc::desc::fixed_clksrc. Fixes: a6eca2ab ("drm: atmel-hlcdc: add config option for clock selection") Signed-off-by:
-
Sam Ravnborg authored
The reg property in the example caused following warnings: xinpeng,xpp055c272.example.dts:20.17-27: Warning (reg_format): /example-0/dsi@ff450000/panel@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) xinpeng,xpp055c272.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' xinpeng,xpp055c272.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' xinpeng,xpp055c272.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' xinpeng,xpp055c272.example.dts:18.21-24.15: Warning (avoid_default_addr_size): /example-0/dsi@ff450000/panel@0: Relying on default #address-cells value xinpeng,xpp055c272.example.dts:18.21-24.15: Warning (avoid_default_addr_size): /example-0/dsi@ff450000/panel@0: Relying on default #size-cells value Added #address-cells and #size-cells to silence the warning. Signed-off-by:
Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200106181731.GA24294@ravnborg.org
-
yu kuai authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/bridge/cdns-dsi.c: In function ‘cdns_dsi_mode2cfg’: drivers/gpu/drm/bridge/cdns-dsi.c:515:11: warning: variable ‘nlanes’ set but not used [-Wunused-but-set-variable] It is never used, and so can be removed. Signed-off-by:
yu kuai <yukuai3@huawei.com> Reviewed-by:
-
yu kuai authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/bridge/cdns-dsi.c: In function ‘cdns_dsi_bridge_enable’: drivers/gpu/drm/bridge/cdns-dsi.c:788:6: warning: variable ‘bpp’ set but not used [-Wunused-but-set-variable] It is never used, and so can be removed. Signed-off-by:
-
zhengbin authored
Fixes coccicheck warning: drivers/gpu/drm/meson/meson_crtc.c:360:3-4: Unneeded semicolon drivers/gpu/drm/meson/meson_plane.c:181:2-3: Unneeded semicolon Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Reviewed-by:
-
Julia Lawall authored
The dw_hdmi_hw structure is only copied into another structure, so make it const. The opportunity for this change was found using Coccinelle. Fixes: 7ed6c665 ("drm: bridge/dw_hdmi-ahb-audio: add audio driver") Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by:
-
Thomas Zimmermann authored
This change makes information about VRAM consumption available on debugfs. See /sys/kernel/debug/dri/0/vram-mm for an overview of how VRAM is being used. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
-
Thomas Zimmermann authored
The hibmc driver aligns scanlines to 16 bytes. By using the new pitch_align argument of drm_gem_vram_fill_create_dumb(), convert hibmc over. v2: * move changes to VRAM helpers into separate patch Signed-off-by:
-
Thomas Zimmermann authored
Adding the pitch alignment as an argument to drm_gem_vram_fill_create_dumb() allows to align scanlines to certain offsets. A value of 0 disables scanline pitches. v3: * only do power-of-2 test if pitch_align given; fails otherwise * mgag200: call drm_gem_vram_fill_create_dumb() with pitch_align v2: * split of patch from related hibmc changes * test if scanline pitch is power of 2 Signed-off-by:
-
Thomas Zimmermann authored
The hibmc driver's struct hibmc_framebuffer stores a DRM framebuffer with an associated GEM object. This functionality is also provided by generic code. Switch hibmc over. Signed-off-by:
-
Thomas Zimmermann authored
There's nothing special about hibmc's fbdev emulation that is not provided by the generic implementation. Switch over and remove the driver's code. Signed-off-by:
-
Nickey Yang authored
Fix edid reading error when edid's block > 2. Signed-off-by:
Nickey Yang <nickey.yang@rock-chips.com> Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20191211203417.19448-1-jbx6244@gmail.com
-
Miquel Raynal authored
Introduce PX30 LVDS support. This means adding the relevant helper functions, a specific probe and also the initialization of a specific PHY. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Maarten Lankhorst authored
Requested, and we need v5.5-rc1 backported as our current branch is still based on v5.4. Signed-off-by:Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
- 05 Jan, 2020 8 commits
-
-
Miquel Raynal authored
Reorganize a bit the functions order to clarify the driver and separate hardware independent and specific functions a bit. This change only moves functions around, there is no functional change. Signed-off-by:
-
Miquel Raynal authored
Return errors instead of returning void from internal helpers. When these helpers are called, check the returned value and print an error message in this case and not blindly continue. Signed-off-by:
-
Miquel Raynal authored
The probe function is highly adapted to the RK3288 specificities, move all specific bits into an "rk3288_probe" function, also part of the platform data. The goal is to ease the addition of new flavors of Rockchip LVDS IPs. Signed-off-by:
-
Miquel Raynal authored
Prepare the introduction of PX30 support by using drm_encoder_helper_funcs as platform data instead of multiple register names which are specific to rk3288 and not generic to all Rockchip IPs. This way adding support for a new flavor of a similar IP will be a matter of adding the relevant helper funcs. Signed-off-by:
-
Miquel Raynal authored
Prepare the introduction of PX30 support by clarifying the function prefixes. We continue to prefix with 'rockchip_lvds_' generic functions that are not specific to a single hardware. Functions implying hardware modifications are now prefixed with 'rk3288_lvds_'. Signed-off-by:
-
Miquel Raynal authored
Fix a #define indentation before adding more lines. Fixes: 34cc0aa2 ("drm/rockchip: Add support for Rockchip Soc LVDS") Signed-off-by:
-
Miquel Raynal authored
PX30 SoCs use a single PHY shared by two display pipelines: MIPI DSI and LVDS. In the case of the LVDS IP, document the possibility to fill a PHY handle. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Miquel Raynal authored
Document the PX30 LVDS compatible. Signed-off-by:
-
- 04 Jan, 2020 6 commits
-
-
Heiko Stuebner authored
The LTK500HD1829 is 5.5" DSI display. v5: - Fix some trivial checkpatch warnings while applying (sam) changes in v4: - drop error message if backlight not found, no other panel does that and if needed it should live in drm_panel_of_backlight changes in v3: - drop one more overlooked panel->drm access Signed-off-by:
-
Heiko Stuebner authored
The LTK500HD1829 is a 5.0" 720x1280 DSI display. v3: - fixed example by adding address,size-cells (sam) changes in v2: - fix id (Maxime) - drop port (Maxime) Signed-off-by:
Maxime Ripard <mripard@kernel.org> Reviewed-by:
-
Heiko Stuebner authored
Shenzhen Leadtek Technology Co., Ltd. produces for example display and touch panels. Signed-off-by:
-
Heiko Stuebner authored
Base on the somewhat similar Rocktech driver but adapted for panel-specific init of the XPP055C272. changes in v5: - drop error message when backlight not found, no other panel does that and if needed it should live in drm_panel_of_backlight changes in v4: none changes in v3: - remove wrong negative sync flags from display-mode to fix a display artifact of the output getting move a tiny bit to the right changes in v2: - move to drm-panel-internal backlight handling (Sam) - adapt to changes that happened to drm_panel structs+functions (Sam) - sort includes (Sam) - drop unnecessary DRV_NAME constant (Sam) - do mipi_dsi_dcs_exit_sleep_mode and mipi_dsi_dcs_set_display_on in panel prepare (not init_sequence) to keep symmetric (Sam) Signed-off-by:
-
Heiko Stuebner authored
The XPP055C272 is a 5.5" 720x1280 DSI display. changes in v4: - fix id (Maxime) - drop port (Maxime) changes in v2: - add size info into binding title (Sam) - add more required properties (Sam) Signed-off-by:
-
Heiko Stuebner authored
Shenzhen Xinpeng Technology Co., Ltd produces for example display panels. Signed-off-by:
-
- 03 Jan, 2020 6 commits
-
-
Andrew F. Davis authored
Found with scripts/coccinelle/misc/boolconv.cocci. Signed-off-by:
Andrew F. Davis <afd@ti.com> Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191016180424.23907-1-afd@ti.com
-
Markus Elfring authored
Simplify this function implementation by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Cc: Daniel Mack <daniel@zonque.org> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: YueHaibing <yuehaibing@huawei.com> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by:
-
Markus Elfring authored
Simplify this function implementation by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Gustavo A. R. Silva authored
Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: mpc512x_defconfig powerpc): drivers/video/fbdev/fsl-diu-fb.c: In function ‘fsl_diu_ioctl’: ./include/linux/device.h:1750:2: warning: this statement may fall through [-Wimplicit-fallthrough=] _dev_warn(dev, dev_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/video/fbdev/fsl-diu-fb.c:1287:3: note: in expansion of macro ‘dev_warn’ dev_warn(info->dev, ^~~~~~~~ drivers/video/fbdev/fsl-diu-fb.c:1290:2: note: here case MFB_SET_PIXFMT: ^~~~ In file included from ./include/linux/acpi.h:15:0, from ./include/linux/i2c.h:13, from ./include/uapi/linux/fb.h:6, from ./include/linux/fb.h:6, from drivers/video/fbdev/fsl-diu-fb.c:20: ./include/linux/device.h:1750:2: warning: this statement may fall through [-Wimplicit-fallthrough=] _dev_warn(dev, dev_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/video/fbdev/fsl-diu-fb.c:1296:3: note: in expansion of macro ‘dev_warn’ dev_warn(info->dev, ^~~~~~~~ drivers/video/fbdev/fsl-diu-fb.c:1299:2: note: here case MFB_GET_PIXFMT: ^~~~ Reported-by:kbuild test robot <lkp@intel.com> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: Timur Tabi <timur@kernel.org> Signed-off-by:
-
Colin Ian King authored
Don't populate the array wtst_xlat on the stack but instead make it static const. Makes the object code smaller by 89 bytes. Before: text data bss dec hex filename 14347 840 0 15187 3b53 fbdev/matrox/matroxfb_misc.o After: text data bss dec hex filename 14162 936 0 15098 3afa fbdev/matrox/matroxfb_misc.o (gcc version 9.2.1, amd64) Signed-off-by:
Colin Ian King <colin.king@canonical.com> [b.zolnierkie: use u8 while at it (suggested by Ville Syrjälä)] Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
YueHaibing <yuehaibing@huawei.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by:
-
