When a vdevice is DLPAR removed from the system the vio subsystem
doesn't bother unmapping the virq from the irq_domain. As a result we
have a virq mapped to a hardware irq that is no longer valid for the
irq_domain. A side effect is that we are left with /proc/irq/<irq#>
affinity entries, and attempts to modify the smp_affinity of the irq
will fail.

In the following observed example the kernel log is spammed by
ics_rtas_set_affinity errors after the removal of a VSCSI adapter.
This is a result of irqbalance trying to adjust the affinity every 10
seconds.

  rpadlpar_io: slot U8408.E8E.10A7ACV-V5-C25 removed
  ics_rtas_set_affinity: ibm,set-xive irq=655385 returns -3
  ics_rtas_set_affinity: ibm,set-xive irq=655385 returns -3

This patch fixes the issue by calling irq_dispose_mapping() on the
virq of the viodev on unregister.

Fixes: f2ab6219 ("powerpc/pseries: Add PFO support to the VIO bus")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

According to the architecture, the process table entry cache must be
flushed with tlbie RIC=2.

Currently the process table entry is set to invalid right before the
PID is returned to the allocator, with no invalidation. This works on
existing implementations that are known to not cache the process table
entry for any except the current PIDR.

It is architecturally correct and cleaner to invalidate with RIC=2
after clearing the process table entry and before the PID is returned
to the allocator. This can be done in arch_exit_mmap that runs before
the final flush, and to ensure the final flush (fullmm) is always a
RIC=2 variant.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Preempt should be consistently disabled for mm_is_thread_local tests,
so bring the rest of these under preempt_disable().

Preempt does not need to be disabled for the mm->context.id tests,
which allows simplification and removal of gotos.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Close the recoverability gap for OPAL calls by using FIXUP_ENDIAN_HV
in the return path.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Add an HV variant of FIXUP_ENDIAN which uses HSRR[01] and does not
clear MSR[RI], which improves recoverability.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When returning from an exception to a soft-enabled context, pending
IRQs are replayed but IRQ tracing is not reset, so a number of them
can get chained together into the same IRQ-disabled trace.

Fix this by having __check_irq_replay re-set IRQ trace. This is
conceptually where we respond to the next interrupt, so it fits the
semantics of the IRQ tracer.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If the host takes a system reset interrupt while a guest is running,
the CPU must exit the guest before processing the host exception
handler.

After this patch, taking a sysrq+x with a CPU running in a guest
gives a trace like this:

   cpu 0x27: Vector: 100 (System Reset) at [c000000fdf5776f0]
       pc: c008000010158b80: kvmppc_run_core+0x16b8/0x1ad0 [kvm_hv]
       lr: c008000010158b80: kvmppc_run_core+0x16b8/0x1ad0 [kvm_hv]
       sp: c000000fdf577850
      msr: 9000000002803033
     current = 0xc000000fdf4b1e00
     paca    = 0xc00000000fd4d680	 softe: 3	 irq_happened: 0x01
       pid   = 6608, comm = qemu-system-ppc
   Linux version 4.14.0-rc7-01489-g47e1893a404a-dirty #26 SMP
   [c000000fdf577a00] c008000010159dd4 kvmppc_vcpu_run_hv+0x3dc/0x12d0 [kvm_hv]
   [c000000fdf577b30] c0080000100a537c kvmppc_vcpu_run+0x44/0x60 [kvm]
   [c000000fdf577b60] c0080000100a1ae0 kvm_arch_vcpu_ioctl_run+0x118/0x310 [kvm]
   [c000000fdf577c00] c008000010093e98 kvm_vcpu_ioctl+0x530/0x7c0 [kvm]
   [c000000fdf577d50] c000000000357bf8 do_vfs_ioctl+0xd8/0x8c0
   [c000000fdf577df0] c000000000358448 SyS_ioctl+0x68/0x100
   [c000000fdf577e30] c00000000000b220 system_call+0x58/0x6c
   --- Exception: c01 (System Call) at 00007fff76868df0
   SP (7fff7069baf0) is in userspace

Fixes: e36d0a2e ("powerpc/powernv: Implement NMI IPI with OPAL_SIGNAL_SYSTEM_RESET")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Although kfree(NULL) is legal, it's a bit lazy to rely on that to
implement the error handling. So do it the normal Linux way using
labels for each failure path.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[mpe: Squash a few patches and rewrite change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Fix a word in these descriptions.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The local variable "rc" will eventually be set only to an error code.
Thus omit the explicit initialisation at the beginning.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In the hv-24x7 code there is a function memord() which tries to
implement a sort function return -1, 0, 1. However one of the
conditions is incorrect, such that it can never be true, because we
will have already returned.

I don't believe there is a bug in practice though, because the
comparisons are an optimisation prior to calling memcmp().

Fix it by swapping the second comparision, so it can be true.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Back in 2008 we added support for "fast little-endian switch" in the
syscall path. This added a special case syscall number 0x1ebe, which
is caught very early in the system call exception and switches endian
with as little overhead as possible. See commit 745a14cc
("[POWERPC] Add fast little-endian switch system call") for full
details.

Although it is fast, it's also completely non standard. The "syscall
number" is out of the range of normal syscalls, it can't be traced or
audited, and it's a bit of a wart. To the best of our knowledge it was
only used by one program, now long since discontinued.

So in an effort to shake out any current users, put it behind a config
option, and make it default n. If anyone *is* using it they can
quickly reinstate it with a rebuild, and we can flip it to default y.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

So we can #ifdef them in the next patch.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When dumping the paca in xmon we currently show kstack. Although it's
not hard it's a bit fiddly to work out what the bounds of the kernel
stack should be based on the kstack value.

To make life easier and "kstack_base" which is the base (lowest
address) of the kernel stack, eg:

 kstack               = 0xc0000000f1a7be30      (0x258)
 kstack_base          = 0xc0000000f1a78000
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

i2c-dev provides an interface for userspace programs to interact with I2C
devices, and is very helpful for I2C-related debugging.

Enable it in pseries_defconfig and powernv_defconfig. It's already enabled
in many other powerpc defconfigs.
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

We call these functions with non-NULL mm or vma. Hence we can skip the
NULL check in these functions. We also remove now unused function
__local_flush_hugetlb_page().
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Drop the checks with is_vm_hugetlb_page() as noticed by Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Currently xmon could call XIVE functions from OPAL even if the XIVE is
disabled or does not exist in the system, as in POWER8 machines. This
causes the following exception:

 1:mon> dx
 cpu 0x1: Vector: 700 (Program Check) at [c000000423c93450]
     pc: c00000000009cfa4: opal_xive_dump+0x50/0x68
     lr: c0000000000997b8: opal_return+0x0/0x50

This patch simply checks if XIVE is enabled before calling XIVE
functions.

Fixes: 243e2511 ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Suggested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Access to PSL/XSL_DEBUG registers on the adapter provides easy access
to the debug facilities provided by PSL/XSL. So this patch adds two
new files (debug, xsl-debug) to the cxl-adapter specific debugfs
folder located at /sys/kernel/debugfs/cxl/card<n>, which will provide
direct r/w access to corrosponding debug registers in the adapter
config-space.
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Unfortunately userspace can construct a sigcontext which enables
suspend. Thus userspace can force Linux into a path where trechkpt is
executed.

This patch blocks this from happening on POWER9 by sanity checking
sigcontexts passed in.

ptrace doesn't have this problem as only MSR SE and BE can be changed
via ptrace.

This patch also adds a number of WARN_ON()s in case we ever enter
suspend when we shouldn't. This should not happen, but if it does the
symptoms are soft lockup warnings which are not obviously TM related,
so the WARN_ON()s should make it obvious what's happening.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Some Power9 revisions can run in a mode where TM operates without
suspended state. If we find ourself on a CPU that might be in this
mode, we query OPAL to check, and if so we reenable TM in CPU
features, and enable a new user feature to signal to userspace that we
are in this mode.

We do not enable the "normal" user feature, PPC_FEATURE2_HTM, but we
do enable PPC_FEATURE2_HTM_NOSC because that indicates to userspace
that the kernel will abort transactions on syscall entry, which is
true regardless of the suspend mode.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Some CPUs can operate in a mode where TM (Transactional Memory) is
enabled but the suspended state of TM is disabled. In this mode
tsuspend does not enter suspended state, instead the transaction is
aborted. Similarly any other event that would lead to suspended state
instead aborts the transaction.

There is also an ABI change, in that in this mode processes are not
allowed to sigreturn with an MSR that would lead to suspended state,
Linux will instead return an error to the sigreturn syscall.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Currently the kernel relies on firmware to inform it whether or not the
CPU supports HTM and as long as the kernel was built with
CONFIG_PPC_TRANSACTIONAL_MEM=y then it will allow userspace to make
use of the facility.

There may be situations where it would be advantageous for the kernel
to not allow userspace to use HTM, currently the only way to achieve
this is to recompile the kernel with CONFIG_PPC_TRANSACTIONAL_MEM=n.

This patch adds a simple commandline option so that HTM can be
disabled at boot time.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[mpe: Simplify to a bool, move to prom.c, put doco in the right place.
 Always disable, regardless of initial state, to avoid user confusion.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Bring in some KVM commits we need (the TM one in particular).

Currently we use CPU_FTR_TM to decide if the CPU/kernel can support
TM (Transactional Memory), and if it's true we advertise that to
Qemu (or similar) via KVM_CAP_PPC_HTM.

PPC_FEATURE2_HTM is the user-visible feature bit, which indicates that
the CPU and kernel can support TM. Currently CPU_FTR_TM and
PPC_FEATURE2_HTM always have the same value, either true or false, so
using the former for KVM_CAP_PPC_HTM is correct.

However some Power9 CPUs can operate in a mode where TM is enabled but
TM suspended state is disabled. In this mode CPU_FTR_TM is true, but
PPC_FEATURE2_HTM is false. Instead a different PPC_FEATURE2 bit is
set, to indicate that this different mode of TM is available.

It is not safe to let guests use TM as-is, when the CPU is in this
mode. So to prevent that from happening, use PPC_FEATURE2_HTM to
determine the value of KVM_CAP_PPC_HTM.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This reverts commit 94a04bc2.

In order to run HPT guests on a radix POWER9 host, we will have to run
the host in single-threaded mode, because POWER9 processors do not
currently support running some threads of a core in HPT mode while
others are in radix mode ("mixed mode").

That means that we will need the same mechanisms that are used on
POWER8 to make the secondary threads available to KVM, which were
disabled on POWER9 by commit 94a04bc2.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/vphn: On Power systems with shared configurations of CPUs
and memory, there are some issues with the association of additional
CPUs and memory to nodes when hot-adding resources.  This patch
fixes an end-of-updates processing problem observed occasionally
in numa_update_cpu_topology().
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/hotplug: On Power systems with shared configurations of CPUs
and memory, there are some issues with the association of additional
CPUs and memory to nodes when hot-adding resources.  During hotplug
CPU operations, this patch resets the timer on topology update work
function to a small value to better ensure that the CPU topology is
detected and configured sooner.
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/vphn: On Power systems with shared configurations of CPUs
and memory, there are some issues with the association of additional
CPUs and memory to nodes when hot-adding resources.  This patch
updates the initialization checks to independently recognize PRRN
or VPHN support.
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/vphn: On Power systems with shared configurations of CPUs
and memory, there are some issues with the association of additional
CPUs and memory to nodes when hot-adding resources.  This patch
corrects the currently broken capability to set the topology for
shared CPUs in LPARs.  At boot time for shared CPU lpars, the
topology for each CPU was being set to node zero.  Now when
numa_update_cpu_topology() is called appropriately, the Virtual
Processor Home Node (VPHN) capabilities information provided by the
pHyp allows the appropriate node in the shared configuration to be
selected for the CPU.
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If we are in user space and hit a UE error, we now have the
basic infrastructure to walk the page tables and find out
the effective address that was accessed, since the DAR
is not valid.

We use a work_queue content to hookup the bad pfn, any
other context causes problems, since memory_failure itself
can call into schedule() via lru_drain_ bits.

We could probably poison the struct page to avoid a race
between detection and taking corrective action.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Hookup instruction errors (UE) for memory offling via memory_failure()
in a manner similar to load/store errors (derror). Since we have access
to the NIP, the conversion is a one step process in this case.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Extract physical_address for UE errors by walking the page
tables for the mm and address at the NIP, to extract the
instruction. Then use the instruction to find the effective
address via analyse_instr().

We might have page table walking races, but we expect them to
be rare, the physical address extraction is best effort. The idea
is to then hook up this infrastructure to memory failure eventually.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Use the same alignment as Effective address.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

There are no users of get_mce_fault_addr() since commit
1363875b ("powerpc/64s: fix handling of non-synchronous machine
checks") removed the last usage.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Use WARN_ON(), while running out of stubs in stub_for_addr()
and abort loading of the module instead of BUG_ON().
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

For PSL9 currently we aren't dumping the PSL FIR register when a
PSL error interrupt is triggered. Contents of this register are useful
in debugging AFU issues.

This patch fixes issue by adding a new service_layer_ops callback
cxl_native_err_irq_dump_regs_psl9() to dump the PSL_FIR registers on a
PSL error interrupt thereby bringing the behavior in line with PSL on
POWER-8. Also the existing service_layer_ops callback
for PSL8 has been renamed to cxl_native_err_irq_dump_regs_psl8().
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Turns out pthreads returns an errno and doesn't set errno. This doesn't
play well with perror().
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

PSL9 doesn't have a FIR2 register as was the case with PSL8. However
currently the register definitions in 'cxl.h' have a definition for
PSL9_FIR2 that actually points to PSL9_FIR_MASK register in the P1
area at offset 0x308.

So this patch renames the def PSL9_FIR2 to PSL9_FIR_MASK and updates
the references in the code to point to the new identifier. It also
removes the code to dump contents of FIR2 (FIR_MASK actually) in
cxl_native_irq_dump_regs_psl9().

Fixes: f24be42a ("cxl: Add psl9 specific code")
Reported-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>