Since alarms don't play well with suspend, it is important every alarm
user cancels his tasks before suspending.

The task should be rescheduled on resume.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Tested-by: Martin Peres <martin.peres@labri.fr>
Tested-by: Dash Four <mr.dash.four@googlemail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This can be useful if some parts of Nouveau try to calculate the time
between two events.  Without this patch, the time difference would be
negative in the case where the computer is suspended/resumed between
two events.

This patch should fix fan speed probing when done while suspending/resuming.

Solve this by saving the current time before suspending and by restoring it
on resume.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Tested-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

If the fan was in manual or auto mode, we should restore the fan speed
that was previously set when resuming.

The initial pwm value is saved when loading the module.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Tested-by: Martin Peres <martin.peres@labri.fr>
Tested-by: Dash Four <mr.dash.four@googlemail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Tested-by: Martin Peres <martin.peres@labri.fr>
Tested-by: Dash Four <mr.dash.four@googlemail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This was already required before, but no check in the kernel was done
to enforce it.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The values are already stored on chipset specific basis in the ctor.
Make the most of them and simplify the code further by using a temporary
variable to avoid code duplication.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

For NV98+, BSP/VP/PPP are all FUC-based engines. Hook them all up in the
same way as NVC0, but with a couple of different values. Also make sure
that the PPP engine is handled in the fifo/mc/vm.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/tegra: Changes for v3.12-rc1

Only a couple of small patches this time around. These are mostly fixes
for minor bugs that showed up, but there is also some preparatory work
that will come in handy for future patches.

* tag 'drm/for-3.12-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/tegra: Parse device tree earlier
  gpu: host1x: Sort drivers by probe order
  gpu: host1x: Check for valid host1x pointer
  gpu: host1x: returning success instead of -ENOMEM
  gpu: host1x: fix an integer overflow check
  drm/tegra: hdmi: Make sure clock is enabled before dumping registers

Parsing the device tree may cause probing to be deferred. Doing this as
early as possible prevents any other resources from being requested and
enabled, therefore reducing the need to cleanup on deferred probe while
at the same time not wasting precious CPU cycles determining if probing
needs to be deferred or not.
Signed-off-by: Thierry Reding <treding@nvidia.com>

External driver declarations are sorted by probe order for consistency.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Under rare circumstances it can happen that the host1x driver's .probe()
doesn't finish properly, in which case the device's driver-specific data
will not be set. Instead of crashing in such a situation, propagate the
error to callers of the host1x_get_drm_data() function.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Enable support for drm render nodes for radeon by flagging the ioctls that
are safe and just needed for rendering.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Enable support for drm render nodes for nouveau by flagging the ioctls that
are safe and just needed for rendering.

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Enable support for drm render nodes for i915 by flagging the ioctls that
are safe and just needed for rendering.

v2: mark reg_read, set_caching and get_caching (ickle, danvet)
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

DRM_IOCTL_MODE_GETFB is used to retrieve information about a given
framebuffer ID. It is a read-only helper and was thus declassified for
unprivileged access in:

  commit a14b1b42
  Author: Mandeep Singh Baines <mandeep.baines@gmail.com>
  Date:   Fri Jan 20 12:11:16 2012 -0800

      drm: remove master fd restriction on mode setting getters

However, alongside width, height and stride information,
DRM_IOCTL_MODE_GETFB also passes back a handle to the underlying buffer of
the framebuffer. This handle allows users to mmap() it and read or write
into it. Obviously, this should be restricted to DRM-Master.

With the current setup, *any* process with access to /dev/dri/card0 (which
means any process with access to hardware-accelerated rendering) can
access the current screen framebuffer and modify it ad libitum.

For backwards-compatibility reasons we want to keep the
DRM_IOCTL_MODE_GETFB call unprivileged. Besides, it provides quite useful
information regarding screen setup. So we simply test whether the caller
is the current DRM-Master and if not, we return 0 as handle, which is
always invalid. A following DRM_IOCTL_GEM_CLOSE on this handle will fail
with EINVAL, but we accept this. Users shouldn't test for errors during
GEM_CLOSE, anyway. And it is still better as a failing MODE_GETFB call.

v2: add capable(CAP_SYS_ADMIN) check for compatibility with i-g-t

Cc: <stable@vger.kernel.org>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Drop the msm_connector base class, and special calls to base class
methods from the encoder, and use instead drm_bridge.  This allows for a
cleaner division between the hdmi (and in future dsi) blocks, from the
mdp block.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This patch adds the notion of a drm_bridge. A bridge is a chained
device which hangs off an encoder. The drm driver using the bridge
should provide the association between encoder and bridge. Once a
bridge is associated with an encoder, it will participate in mode
set, and dpms (via the enable/disable hooks).
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Noticed by kbuild test robot.
Signed-off-by: Dave Airlie <airlied@redhat.com>

This was one level away from where I'd grepped.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Alex writes:
This is the radeon drm-next request.  Big changes include:
- support for dpm on CIK parts
- support for ASPM on CIK parts
- support for berlin GPUs
- major ring handling cleanup
- remove the old 3D blit code for bo moves in favor of CP DMA or sDMA
- lots of bug fixes

[airlied: fix up a bunch of conflicts from drm_order removal]

* 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits)
  drm/radeon/dpm: make sure dc performance level limits are valid (CI)
  drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2)
  drm/radeon: gcc fixes for extended dpm tables
  drm/radeon: gcc fixes for kb/kv dpm
  drm/radeon: gcc fixes for ci dpm
  drm/radeon: gcc fixes for si dpm
  drm/radeon: gcc fixes for ni dpm
  drm/radeon: gcc fixes for trinity dpm
  drm/radeon: gcc fixes for sumo dpm
  drm/radeonn: gcc fixes for rv7xx/eg/btc dpm
  drm/radeon: gcc fixes for rv6xx dpm
  drm/radeon: gcc fixes for radeon_atombios.c
  drm/radeon: enable UVD interrupts on CIK
  drm/radeon: fix init ordering for r600+
  drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled
  drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init
  drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume
  radeon kms: fix uninitialised hotplug work usage in r100_irq_process()
  drm/radeon/audio: set up the sads on DCE3.2 asics
  drm/radeon: fix handling of variable sized arrays for router objects
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	drivers/gpu/drm/i915/i915_gem_dmabuf.c
	drivers/gpu/drm/i915/intel_pm.c
	drivers/gpu/drm/radeon/cik.c
	drivers/gpu/drm/radeon/ni.c
	drivers/gpu/drm/radeon/r600.c

Check to make sure the dc limits are valid before using them.
Some systems may not have a dc limits table.  In that case just
use the ac limits.  This fixes hangs on systems when the power
state is changed when on battery (dc) due to invalid performance
state parameters.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=68708Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Check to make sure the dc limits are valid before using them.
Some systems may not have a dc limits table.  In that case just
use the ac limits.  This fixes hangs on systems when the power
state is changed when on battery (dc) due to invalid performance
state parameters.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=68708

v2: fix up limits in dpm_init()
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Newer versions of gcc seem to wander off into the
weeds when dealing with variable sizes arrays in
structs.  Rather than indexing the arrays, use
pointer arithmetic.

See bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=66932
https://bugs.freedesktop.org/show_bug.cgi?id=66972
https://bugs.freedesktop.org/show_bug.cgi?id=66945Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The same as on evergreen.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: FrankR Huang <FrankR.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The vram scratch buffer needs to be initialized
before the mc is programmed otherwise we program
0 as the GPU address of the default GPU fault
page.  In most cases we put vram at zero anyway and
reserve a page for the legacy vga buffer so in practice
this shouldn't cause any problems, but better to make
it correct.

Was changed in:
6fab3febReported-by: FrankR Huang <FrankR.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Avoid needless uvd reprogramming if uvd powergating is disabled.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

No need to try the ring tests if starting the UVD block failed.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

For powergating, we just need to re-init the registers, there
is no need to restore the uvd BOs.  This just adds needless
work when powergating uvd for playback while the system is
on.  We only need to restore the uvd BOs on an actual resume
from suspend or when the driver loads.

This fixes multi-stream UVD playback on KB systems.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

Commit a01c34f7 (radeon kms: do not
flush uninitialized hotplug work) moved work initialisation phase to
the last step of radeon_irq_kms_init(). Meelis Roos reported that this
causes problems on his machine because drm_irq_install() uses hotplug
work on r100.

hotplug work flushed in radeon_irq_kms_fini(), with two possible cases:
-- radeon_irq_kms_fini() call after successful radeon_irq_kms_init()
-- radeon_irq_kms_fini() call after unsuccessful (or not called at all)
   radeon_irq_kms_init()

The latter one causes flush work on uninitialised hotplug work. Move
work initialisation before drm_irq_install(), but keep existing agreement
to flush hotplug work in radeon_irq_kms_fini() only for `irq.installed'
(successful radeon_irq_kms_init()) case.

WARNING: CPU: 0 PID: 243 at kernel/workqueue.c:1378 __queue_work+0x132/0x16d()
Call Trace:
[<c12319b3>] ? dump_stack+0xa/0x13
[<c1022600>] ? warn_slowpath_common+0x75/0x8a
[<c1031010>] ? __queue_work+0x132/0x16d
[<c1031010>] ? __queue_work+0x132/0x16d
[<c102269e>] ? warn_slowpath_null+0x1b/0x1f
[<c1031010>] ? __queue_work+0x132/0x16d
[<c103107b>] ? queue_work_on+0x30/0x40
[<f8aed3f3>] ? r100_irq_process+0x16d/0x1e6 [radeon]
[<f8ae77cf>] ? radeon_driver_irq_preinstall_kms+0xc2/0xc5 [radeon]
[<f8974d77>] ? drm_irq_install+0xb2/0x1ac [drm]
[<f897604d>] ? drm_vblank_init+0x196/0x1d2 [drm]
[<f8ae78d3>] ? radeon_irq_kms_init+0x33/0xc6 [radeon]
[<f8aef35a>] ? r100_startup+0x1a3/0x1d6 [radeon]
[<f8ad77c8>] ? radeon_ttm_init+0x26e/0x287 [radeon]
[<f8aef752>] ? r100_init+0x2b3/0x309 [radeon]
[<c118082e>] ? vga_client_register+0x39/0x40
[<f8ac535f>] ? radeon_device_init+0x54b/0x61b [radeon]
[<f8ac40fd>] ? cail_mc_write+0x13/0x13 [radeon]
[<f8ac6864>] ? radeon_driver_load_kms+0x82/0xda [radeon]
[<f8978bbd>] ? drm_get_pci_dev+0x136/0x22d [drm]
[<f8ac409b>] ? radeon_pci_probe+0x6c/0x86 [radeon]
[<c112acf6>] ? pci_device_probe+0x4c/0x83
[<c11846c7>] ? driver_probe_device+0x80/0x184
[<c112a848>] ? pci_match_id+0x18/0x36
[<c1184837>] ? __driver_attach+0x44/0x5f
[<c11833f4>] ? bus_for_each_dev+0x50/0x5a
[<c118433e>] ? driver_attach+0x14/0x16
[<c11847f3>] ? __device_attach+0x28/0x28
[<c1184045>] ? bus_add_driver+0xd6/0x1bf
[<c1184c22>] ? driver_register+0x78/0xcf
[<f8ba8000>] ? 0xf8ba7fff
[<c10003bf>] ? do_one_initcall+0x8b/0x121
[<c101e668>] ? change_page_attr_clear+0x2e/0x33
[<f8ba8000>] ? 0xf8ba7fff
[<c101e689>] ? set_memory_ro+0x1c/0x20
[<c104de94>] ? set_page_attributes+0x11/0x12
[<c104f6e1>] ? load_module+0x12fa/0x17e8
[<c107483b>] ? map_vm_area+0x22/0x31
[<c104fc36>] ? SyS_init_module+0x67/0x7d
[<c1234245>] ? sysenter_do_call+0x12/0x26
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org