Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw into next

Pull gfs2 updates from Steven Whitehouse:
 "This must be about the smallest merge window patch set ever for GFS2.
  It is probably also the first one without a single patch from me.
  That is down to a combination of factors, and I have some things in
  the works that are not quite ready yet, that I hope to put in next
  time around.

  Returning to what is here this time...  we have 3 patches which fix
  various warnings.  Two are bug fixes (for quotas and also a rare
  recovery race condition).  The final patch, from Ben Marzinski, is an
  important change in the freeze code which has been in progress for
  some time.  This removes the need to take and drop the transaction
  lock for every single transaction, when the only time it was used, was
  at file system freeze time.  Ben's patch integrates the freeze
  operation into the journal flush code as an alternative with lower
  overheads and also lands up resolving some difficult to fix races at
  the same time"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
  GFS2: Prevent recovery before the local journal is set
  GFS2: fs/gfs2/file.c: kernel-doc warning fixes
  GFS2: fs/gfs2/bmap.c: kernel-doc warning fixes
  GFS2: remove transaction glock
  GFS2: lops.c: replace 0 by NULL for pointers
  GFS2: quotas not being refreshed in gfs2_adjust_quota

Pull file locking changes from Jeff Layton:
 "Pretty quiet on the file-locking related front this cycle.  Just some
  small cleanups and the addition of some tracepoints in the lease
  handling code"

* tag 'locks-v3.16' of git://git.samba.org/jlayton/linux:
  locks: add some tracepoints in the lease handling code
  fs/locks.c: replace seq_printf by seq_puts
  locks: ensure that fl_owner is always initialized properly in flock and lease codepaths

Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 into next

Pull firewire updates from Stefan Richter:
 "IEEE 1394 (FireWire) subsystem changes: One optimization for some VIA
  controllers, one fix, one kconfig brushup"

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: enable MSI for VIA VT6315 rev 1, drop cycle timer quirk
  firewire: Use COMPILE_TEST for build testing
  firewire: net: fix NULL derefencing in fwnet_probe()

The newly merged versatile sched clock support uses a deprecated
interface.  Of course that patch got routed through the ARM tree instead
of going through the relevant maintainer tree.

Use the proper interface so we can get rid of the cruft.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86/UV changes from Ingo Molnar:
 "Continued updates for SGI UV 3 hardware support"

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/UV: Fix conditional in gru_exit()
  x86/UV: Set n_lshift based on GAM_GR_CONFIG MMR for UV3

Pull x86 RAS changes from Ingo Molnar:
 "Improve mcheck device initialization and bootstrap robustness"

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mce: Panic when a core has reached a timeout
  x86/mce: Improve mcheck_init_device() error handling

Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull x86 IOSF platform updates from Ingo Molnar:
 "IOSF (Intel OnChip System Fabric) updates:

   - generalize the IOSF interface to allow mixed mode drivers: non-IOSF
     drivers to utilize of IOSF features on IOSF platforms.

   - add 'Quark X1000' IOSF/MBI support

   - clean up BayTrail and Quark PCI ID enumeration"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, iosf: Add PCI ID macros for better readability
  x86, iosf: Add Quark X1000 PCI ID
  x86, iosf: Added Quark MBI identifiers
  x86, iosf: Make IOSF driver modular and usable by more drivers

Pull x86 mm update from Ingo Molnar:

 - speed up 256 GB PCI BAR ioremap()s

 - speed up PTE swapout page reclaim case

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, ioremap: Speed up check for RAM pages
  x86/mm: In the PTE swapout page reclaim case clear the accessed bit instead of flushing the TLB

Merge branch 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull x86 microcode changes from Ingo Molnar:
 "A microcode-debugging boot flag plus related refactoring"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode: Add a disable chicken bit
  x86, boot: Carve out early cmdline parsing function

Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull x86 irq cleanup from Ingo Molnar:
 "A single, trivial cleanup"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Clean up VECTOR_UNDEFINED and VECTOR_RETRIGGERED definition

Merge branch 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull x86 build cleanups from Ingo Molnar:
 "Two small build related cleanups"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Supress realmode.bin is up to date message
  compiler-intel.h: Remove duplicate definition

Merge branch 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull x86 boot changes from Ingo Molnar:
 "Two small cleanups"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, boot: Remove misc.h inclusion from compressed/string.c
  x86, boot: Do not include boot.h in string.c

Pull x86 asm cleanups from Ingo Molnar:
 "A handful of entry_64.S cleanups"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86_64, entry: Merge paranoidzeroentry_ist into idtentry
  x86_64, entry: Merge most 64-bit asm entry macros
  x86_64, entry: Add missing 'DEFAULT_FRAME 0' entry annotations

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull scheduler updates from Ingo Molnar:
 "The main scheduling related changes in this cycle were:

   - various sched/numa updates, for better performance

   - tree wide cleanup of open coded nice levels

   - nohz fix related to rq->nr_running use

   - cpuidle changes and continued consolidation to improve the
     kernel/sched/idle.c high level idle scheduling logic.  As part of
     this effort I pulled cpuidle driver changes from Rafael as well.

   - standardized idle polling amongst architectures

   - continued work on preparing better power/energy aware scheduling

   - sched/rt updates

   - misc fixlets and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
  sched/numa: Decay ->wakee_flips instead of zeroing
  sched/numa: Update migrate_improves/degrades_locality()
  sched/numa: Allow task switch if load imbalance improves
  sched/rt: Fix 'struct sched_dl_entity' and dl_task_time() comments, to match the current upstream code
  sched: Consolidate open coded implementations of nice level frobbing into nice_to_rlimit() and rlimit_to_nice()
  sched: Initialize rq->age_stamp on processor start
  sched, nohz: Change rq->nr_running to always use wrappers
  sched: Fix the rq->next_balance logic in rebalance_domains() and idle_balance()
  sched: Use clamp() and clamp_val() to make sys_nice() more readable
  sched: Do not zero sg->cpumask and sg->sgp->power in build_sched_groups()
  sched/numa: Fix initialization of sched_domain_topology for NUMA
  sched: Call select_idle_sibling() when not affine_sd
  sched: Simplify return logic in sched_read_attr()
  sched: Simplify return logic in sched_copy_attr()
  sched: Fix exec_start/task_hot on migrated tasks
  arm64: Remove TIF_POLLING_NRFLAG
  metag: Remove TIF_POLLING_NRFLAG
  sched/idle: Make cpuidle_idle_call() void
  sched/idle: Reflow cpuidle_idle_call()
  sched/idle: Delay clearing the polling bit
  ...

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull perf updates from Ingo Molnar:
 "The tooling changes maintained by Jiri Olsa until Arnaldo is on
  vacation:

  User visible changes:
   - Add -F option for specifying output fields (Namhyung Kim)
   - Propagate exit status of a command line workload for record command
     (Namhyung Kim)
   - Use tid for finding thread (Namhyung Kim)
   - Clarify the output of perf sched map plus small sched command
     fixes (Dongsheng Yang)
   - Wire up perf_regs and unwind support for ARM64 (Jean Pihet)
   - Factor hists statistics counts processing which in turn also fixes
     several bugs in TUI report command (Namhyung Kim)
   - Add --percentage option to control absolute/relative percentage
     output (Namhyung Kim)
   - Add --list-cmds to 'kmem', 'mem', 'lock' and 'sched', for use by
     completion scripts (Ramkumar Ramachandra)

  Development/infrastructure changes and fixes:
   - Android related fixes for pager and map dso resolving (Michael
     Lentine)
   - Add libdw DWARF post unwind support for ARM (Jean Pihet)
   - Consolidate types.h for ARM and ARM64 (Jean Pihet)
   - Fix possible null pointer dereference in session.c (Masanari Iida)
   - Cleanup, remove unused variables in map_switch_event() (Dongsheng
     Yang)
   - Remove nr_state_machine_bugs in perf latency (Dongsheng Yang)
   - Remove usage of trace_sched_wakeup(.success) (Peter Zijlstra)
   - Cleanups for perf.h header (Jiri Olsa)
   - Consolidate types.h and export.h within tools (Borislav Petkov)
   - Move u64_swap union to its single user's header, evsel.h (Borislav
     Petkov)
   - Fix for s390 to properly parse tracepoints plus test code
     (Alexander Yarygin)
   - Handle EINTR error for readn/writen (Namhyung Kim)
   - Add a test case for hists filtering (Namhyung Kim)
   - Share map_groups among threads of the same group (Arnaldo Carvalho
     de Melo, Jiri Olsa)
   - Making some code (cpu node map and report parse callchain callback)
     global to be usable by upcomming changes (Don Zickus)
   - Fix pmu object compilation error (Jiri Olsa)

  Kernel side changes:
   - intrusive uprobes fixes from Oleg Nesterov.  Since the interface is
     admin-only, and the bug only affects user-space ("any probed
     jmp/call can kill the application"), we queued these fixes via the
     development tree, as a special exception.
   - more fuzzer motivated race fixes and related refactoring and
     robustization.
   - allow PMU drivers to be built as modules.  (No actual module yet,
     because the x86 Intel uncore module wasn't ready in time for this)"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
  perf tools: Add automatic remapping of Android libraries
  perf tools: Add cat as fallback pager
  perf tests: Add a testcase for histogram output sorting
  perf tests: Factor out print_hists_*()
  perf tools: Introduce reset_output_field()
  perf tools: Get rid of obsolete hist_entry__sort_list
  perf hists: Reset width of output fields with header length
  perf tools: Skip elided sort entries
  perf top: Add --fields option to specify output fields
  perf report/tui: Fix a bug when --fields/sort is given
  perf tools: Add ->sort() member to struct sort_entry
  perf report: Add -F option to specify output fields
  perf tools: Call perf_hpp__init() before setting up GUI browsers
  perf tools: Consolidate management of default sort orders
  perf tools: Allow hpp fields to be sort keys
  perf ui: Get rid of callback from __hpp__fmt()
  perf tools: Consolidate output field handling to hpp format routines
  perf tools: Use hpp formats to sort final output
  perf tools: Support event grouping in hpp ->sort()
  perf tools: Use hpp formats to sort hist entries
  ...

Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull core locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - reduced/streamlined smp_mb__*() interface that allows more usecases
     and makes the existing ones less buggy, especially in rarer
     architectures

   - add rwsem implementation comments

   - bump up lockdep limits"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  rwsem: Add comments to explain the meaning of the rwsem's count field
  lockdep: Increase static allocations
  arch: Mass conversion of smp_mb__*()
  arch,doc: Convert smp_mb__*()
  arch,xtensa: Convert smp_mb__*()
  arch,x86: Convert smp_mb__*()
  arch,tile: Convert smp_mb__*()
  arch,sparc: Convert smp_mb__*()
  arch,sh: Convert smp_mb__*()
  arch,score: Convert smp_mb__*()
  arch,s390: Convert smp_mb__*()
  arch,powerpc: Convert smp_mb__*()
  arch,parisc: Convert smp_mb__*()
  arch,openrisc: Convert smp_mb__*()
  arch,mn10300: Convert smp_mb__*()
  arch,mips: Convert smp_mb__*()
  arch,metag: Convert smp_mb__*()
  arch,m68k: Convert smp_mb__*()
  arch,m32r: Convert smp_mb__*()
  arch,ia64: Convert smp_mb__*()
  ...

Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

Pull RCU changes from Ingo Molnar:
 "The main RCU changes in this cycle were:

   - RCU torture-test changes.

   - variable-name renaming cleanup.

   - update RCU documentation.

   - miscellaneous fixes.

   - patch to suppress RCU stall warnings while sysrq requests are being
     processed"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits)
  rcu: Provide API to suppress stall warnings while sysrc runs
  rcu: Variable name changed in tree_plugin.h and used in tree.c
  torture: Remove unused definition
  torture: Remove __init from torture_init_begin/end
  torture: Check for multiple concurrent torture tests
  locktorture: Remove reference to nonexistent Kconfig parameter
  rcutorture: Run rcu_torture_writer at normal priority
  rcutorture: Note diffs from git commits
  rcutorture: Add missing destroy_timer_on_stack()
  rcutorture: Explicitly test synchronous grace-period primitives
  rcutorture:  Add tests for get_state_synchronize_rcu()
  rcutorture: Test RCU-sched primitives in TREE_PREEMPT_RCU kernels
  torture: Use elapsed time to detect hangs
  rcutorture: Check for rcu_torture_fqs creation errors
  torture: Better summary diagnostics for build failures
  torture: Notice if an all-zero cpumask is passed inside a critical section
  rcutorture: Make rcu_torture_reader() use cond_resched()
  sched,rcu: Make cond_resched() report RCU quiescent states
  percpu: Fix raw_cpu_inc_return()
  rcutorture: Export RCU grace-period kthread wait state to rcutorture
  ...

Pull CMA and DMA-mapping fixes from Marek Szyprowski:
 "A few fixes for dma-mapping and CMA subsystems"

* 'for-v3.16' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  CMA: correct unlock target
  drivers/base/dma-contiguous.c: erratum of dev_get_cma_area
  arm: dma-mapping: add checking cma area initialized
  arm: dma-iommu: Clean up redundant variable
  cma: Remove potential deadlock situation

Merge tag 'regulator-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into next

Pull regulator updates from Mark Brown:
 "The bulk of the changes for this release are a few new drivers however
  there are a couple of noticable core changes and the usual stream of
  cleanups and fixes:

   - move disable of unused regulators later in init so it comes after
     deferred probe has iterated making startup smoother.
   - fixes to reference counting of the DT nodes for constraints from
     Charles Keepax.  This has little practical impact since all real
     users of the regulator bindings use FDT which doesn't need the
     reference counting.
   - lots of cleanups, especially to the Samsung drivers.
   - support for Linear Technologies LTC3589, Texas Instruments
     TPS658640 and X-Powers AXP20x"

* tag 'regulator-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (64 commits)
  regulator: pbias: remove unnecessary OOM messages
  regulator: max8649: remove unnecessary OOM messages
  regulator: core: Fix the init of DT defined fixed regulators
  regulator: core: Disable unused regulators after deferred probing is done
  regulator: Don't disable unused regulators we don't have permission for
  regulator: axp20x: Use regulator_map_voltage_ascend for LDO4
  regulator: use of_property_read_{bool|u32}()
  regulator: Fix regulator_get_{optional,exclusive}() documentation
  regulators: Add definition of regulator_set_voltage_time() for !CONFIG_REGULATOR
  regulator: arizona-ldo1: add missing #include
  regulator: pfuze100: Support enable/disable for fixed regulator
  regulator: ltc3589: Remove ltc3589_list_voltage_fixed function
  regulator: ltc3589: Fix module dependency
  regulator: tps6586x: Remove unused to_tps6586x_dev() function
  regulator: tps65218: Convert to use regulator_set_voltage_time_sel
  regulator: tps6586x: Add support for the TPS658640
  regulator: tps6586x: Prepare supporting fixed regulators
  regulator: pfuze100: Don't allocate an invalid gpio
  regulator: pfuze100: Support SWB enable/disable
  regulator: fixed: use of_property_read_{bool|u32}()
  ...

Pull spi updates from Mark Brown:
 "For this release SPI has been exceptionally quiet, all the work has
  been on improving drivers (including taking advantage of some of the
  recent framework updates):

   - DMA support for the rspi driver providing a nice performance boost
   - performance improvement for the SIRF controller in PIO mode
   - new support for the Cadence SPI IP and for pxa2xx on BayTrail"

* tag 'spi-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (59 commits)
  spi: rspi: Extract rspi_common_transfer()
  spi: rspi: Add DMA support for RSPI on RZ/A1H
  spi: rspi: Add DMA support for QSPI on R-Car Gen2
  spi: rspi: Absorb rspi_rz_transfer_out_in() into rspi_rz_transfer_one()
  spi: rspi: Merge rspi_*_dma() into rspi_dma_transfer()
  spi: rspi: Pass sg_tables instead of spi_tranfer to rspi_*_dma()
  spi: rspi: Move RSPI-specific setup out of DMA routines
  spi: rspi: Use SPI core DMA mapping framework
  spi: rspi: SPI DMA core needs both RX and TX DMA to function
  spi: rspi: Remove unneeded resource test in DMA setup
  spi: rspi: Extract rspi_request_dma_chan()
  spi: rspi: Don't consider DMA configuration failures fatal
  spi: rspi: Extract rspi_pio_transfer()
  spi: rspi: Use core SPI_MASTER_MUST_[RT]X handling
  spi: rspi: Remove unused 16-bit DMA support
  spi: rspi: Do not call rspi_receive_init() for TX-only
  spi: rspi: Extract rspi_wait_for_{tx_empty,rx_full}()
  spi/pxa2xx: fix runtime PM enabling order
  spi/fsl-espi: fix rx_buf in fsl_espi_cmd_trans()/fsl_espi_rw_trans()
  spi: core: Ignore unsupported spi-[tr]x-bus-width property values
  ...

Pull regmap updates from Mark Brown:
 "Another fairly quiet release, a few bug fixes and a couple of new
  features:

   - support for I2C devices connected to SMBus rather than full I2C
     controllers contributed by Boris Brezillon.  If the controller is
     only capable of SMBus operation the framework will transparently
     fall back to that

   - suport for little endian values, contributed by Xiubo Li"

* tag 'regmap-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: mmio: Fix regmap_mmio_write for uneven counts
  regmap: irq: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  regmap: Add missing initialization of this_page
  regmap: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  regmap: i2c: fallback to SMBus if the adapter does not support standard I2C
  regmap: add reg_read/reg_write callbacks to regmap_bus struct
  regmap: rbtree: improve 64bits memory alignment
  regmap: mmio: Fix the bug of 'offset' value parsing.
  regmap: implement LE formatting/parsing for 16/32-bit values.

Merge tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into next

Pull pin control changes from Linus Walleij:
 "This is the bulk of pin control changes for the v3.16 development
  cycle:

   - Antoine Tenart made the get_group_pins() vtable entry optional.

   - Antoine also provides an entirely new driver for the Marvell Berlin
     SoC.  This is unrelated to the existing MVEBU hardware driver and
     warrants its own separate driver.

   - reflected from the GPIO subsystem there is a number of refactorings
     to make pin control drivers with gpiochips use the new gpiolib
     irqchip helpers.  The following drivers were converted to use the
     new infrastructure:
       * ST Microelectronics STiH416 and friends
       * The Atmel AT91
       * The CSR SiRF (Prima2)
       * The Qualcomm MSM series

   - massive improvements in the Qualcomm MSM driver from Bjorn
     Andersson, Andy Gross and Kumar Gala.  Among those new support for
     the IPQ8064 and MSM8x74 SoC variants.

   - support for the Freescale i.MX6 SoloX SoC variant.

   - massive improvements in the Allwinner sunxi driver from Boris
     Brezillon, Maxime Ripard and Chen-Yu Tsai.

   - Renesas PFC updates from Laurent Pinchart, Kuninori Morimoto,
     Wolfram Sang and Magnus Damm.

   - Cleanups and refactorings of the nVidia Tegra driver from Stepgen
     Warren.

   - the Exynos driver now supports the Exynos3250 SoC.

   - Intel BayTrail updates from Jin Yao, Mika Westerberg.

   - the MVEBU driver now supports the Orion5x SoC variants, which is
     part of the effort of getting rid of the old Marvell kludges in
     arch/arm/mach-orion5x

   - Rockchip driver updates from Heiko Stuebner.

   - a ton of cleanups and janitorial patches from Axel Lin.

   - some minor fixes and improvements here and there"

* tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (93 commits)
  pinctrl: sirf: fix a bad conflict resolution
  pinctrl: msm: Add more MSM8X74 pin definitions
  pinctrl: qcom: ipq8064: Fix naming convention
  pinctrl: msm: Add missing sdc1 and sdc3 groups
  pinctrl: sirf: switch to using allocated state container
  pinctrl: Enable "power-source" to be extracted from DT files
  pinctrl: sunxi: create irq/pin mapping during init
  pinctrl: pinconf-generic: Use kmemdup instead of kmalloc + memcpy
  pinctrl: berlin: Use devm_ioremap_resource()
  pinctrl: sirf: fix typo for GPIO bank number
  pinctrl: sunxi: depend on RESET_CONTROLLER
  pinctrl: sunxi: fix pin numbers passed to register offset helpers
  pinctrl: add pinctrl driver for imx6sx
  pinctrl/at91: Fix lockup when IRQ on PIOC and PIOD occurs
  pinctrl: msm: switch to using generic GPIO irqchip helpers
  pinctrl: sunxi: Fix multiple registration issue
  pinctrl: sunxi: Fix recursive dependency
  pinctrl: berlin: add the BG2CD pinctrl driver
  pinctrl: berlin: add the BG2 pinctrl driver
  pinctrl: berlin: add the BG2Q pinctrl driver
  ...

Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging into next

Pull hwmon updates from Guenter Roeck:
 "New driver for NCT6683D

  New chip support to existing drivers:
   - add support for STTS2004 and AT30TSE004 to jc42 driver
   - add support for EMC1402/EMC1412/EMC1422 to emc1403 driver

  Other notable changes:
   - document hwmon kernel API
   - convert jc42, lm70, lm75, lm77, lm83, lm92, max1619, tmp421, and
     tmp102 drivers to use new hwmon API functions
   - replace function macros in lm80, lm92, and jc42 drivers with real
     code
   - convert emc1403 driver to use regmap, add support for additional
     attributes, and add device IDs for EMC1412, EMC1413, and EMC1414
   - various additional cleanup and minor bug fixes in several drivers"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (60 commits)
  hwmon: (nct6775) Fix probe unwind paths to properly unregister platform devices
  hwmon: (nct6683) Fix probe unwind paths to properly unregister platform devices
  hwmon: (ultra45_env) Introduce managed version of kzalloc
  hwmon: Driver for NCT6683D
  hwmon: (lm80) Rearrange code to avoid forward declarations
  hwmon: (lm80) Convert fan display function macros into functions
  hwmon: (lm80) Convert voltage display function macros into functions
  hwmon: (lm80) Convert temperature display function macros into functions
  hwmon: (lm80) Normalize all temperature values to 16 bit
  hwmon: (lm80) Simplify TEMP_FROM_REG
  hwmon: (lm83) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm83) Rearange code to avoid forward declarations
  hwmon: (lm83) Drop FSF address
  hwmon: (max1619) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (max1619) Drop function macros
  hwmon: (max1619) Rearrange code to avoid forward declarations
  hwmon: (max1619) Drop FSF address
  hwmon: (max1619) Fix critical alarm display
  hwmon: (jc42) Add support for STTS2004 and AT30TSE004
  hwmon: (jc42) Convert function macros into functions
  ...

Pull first set of s390 updates from Martin Schwidefsky:
 "The biggest change in this patchset is conversion from the bootmem
  bitmaps to the memblock code.  This conversion requires two common
  code patches to introduce the 'physmem' memblock list.

  We experimented with ticket spinlocks but in the end decided against
  them as they perform poorly on virtualized systems.  But the spinlock
  cleanup and some small improvements are included.

  The uaccess code got another optimization, the get_user/put_user calls
  are now inline again for kernel compiles targeted at z10 or newer
  machines.  This makes the text segment shorter and the code gets a
  little bit faster.

  And as always some bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits)
  s390/lowcore: replace lowcore irb array with a per-cpu variable
  s390/lowcore: reserve 96 bytes for IRB in lowcore
  s390/facilities: remove extract-cpu-time facility check
  s390: require mvcos facility for z10 and newer machines
  s390/boot: fix boot of compressed kernel built with gcc 4.9
  s390/cio: remove weird assignment during argument evaluation
  s390/time: cast tv_nsec to u64 prior to shift in update_vsyscall
  s390/oprofile: make return of 0 explicit
  s390/spinlock: refactor arch_spin_lock_wait[_flags]
  s390/rwlock: add missing local_irq_restore calls
  s390/spinlock,rwlock: always to a load-and-test first
  s390/cio: fix multiple structure definitions
  s390/spinlock: fix system hang with spin_retry <= 0
  s390/appldata: add slab.h for kzalloc/kfree
  s390/uaccess: provide inline variants of get_user/put_user
  s390/pci: add some new arch specific pci attributes
  s390/pci: use pdev->dev.groups for attribute creation
  s390/pci: use macro for attribute creation
  s390/pci: improve state check when processing hotplug events
  s390: split TIF bits into CIF, PIF and TIF bits
  ...

Pull USB driver updates from Greg KH:
 "Here is the big USB driver pull request for 3.16-rc1.

  Nothing huge here, but lots of little things in the USB core, and in
  lots of drivers.  Hopefully the USB power management will be work
  better now that it has been reworked to do per-port power control
  dynamically.  There's also a raft of gadget driver updates and fixes,
  CONFIG_USB_DEBUG is finally gone now that everything has been
  converted over to the dynamic debug inteface, the last hold-out
  drivers were cleaned up and the config option removed.  There were
  also other minor things all through the drivers/usb/ tree, the
  shortlog shows this pretty well.

  All have been in linux-next, including the very last patch, which came
  from linux-next to fix a build issue on some platforms"

* tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (314 commits)
  usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y
  USB: orinoco_usb: remove CONFIG_USB_DEBUG support
  USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support
  USB: media: streamzap: remove CONFIG_USB_DEBUG
  USB: media: redrat3: remove CONFIG_USB_DEBUG usage
  USB: media: redrat3: remove unneeded tracing macro
  usb: qcserial: add additional Sierra Wireless QMI devices
  usb: host: max3421-hcd: Use module_spi_driver
  usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity
  usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning
  usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue()
  usb: qcserial: add Netgear AirCard 341U
  Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2
  usb: host: xhci-plat: add xhci_plat_start()
  usb: host: max3421-hcd: Fix potential NULL urb dereference
  Revert "usb: gadget: net2280: Add support for PLX USB338X"
  USB: usbip: remove CONFIG_USB_DEBUG reference
  USB: remove CONFIG_USB_DEBUG from defconfig files
  usb: resume child device when port is powered on
  usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty / serial driver pull request for 3.16-rc1.

  A variety of different serial driver fixes and updates and additions,
  nothing huge, and no real major core tty changes at all.

  All have been in linux-next for a while"

* tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (84 commits)
  Revert "serial: imx: remove the DMA wait queue"
  serial: kgdb_nmi: Improve console integration with KDB I/O
  serial: kgdb_nmi: Switch from tasklets to real timers
  serial: kgdb_nmi: Use container_of() to locate private data
  serial: cpm_uart: No LF conversion in put_poll_char()
  serial: sirf: Fix compilation failure
  console: Remove superfluous readonly check
  console: Use explicit pointer type for vc_uni_pagedir* fields
  vgacon: Fix & cleanup refcounting
  ARM: tty: Move HVC DCC assembly to arch/arm
  tty/hvc/hvc_console: Fix wakeup of HVC thread on hvc_kick()
  drivers/tty/n_hdlc.c: replace kmalloc/memset by kzalloc
  vt: emulate 8- and 24-bit colour codes.
  printk/of_serial: fix serial console cessation part way through boot.
  serial: 8250_dma: check the result of TX buffer mapping
  serial: uart: add hw flow control support configuration
  tty/serial: at91: add interrupts for modem control lines
  tty/serial: at91: use mctrl_gpio helpers
  tty/serial: Add GPIOLIB helpers for controlling modem lines
  ARM: at91: gpio: implement get_direction
  ...

Merge tag 'staging-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging into next

Pull staging driver updates from Greg KH:
 "Here is the big staging driver pull request for 3.16-rc1.

  Lots of stuff here, tons of cleanup patches, a few new drivers, and
  some removed as well, but I think we are still adding a few thousand
  more lines than we remove, due to the new drivers being bigger than
  the ones deleted.

  One notible bit of work did stand out, Jes Sorensen has gone on a
  tear, fixing up a wireless driver to be "more sane" than it originally
  was from the vendor, with over 500 patches merged here.  Good stuff,
  and a number of users laptops are better off for it.

  All of this has been in linux-next for a while"

* tag 'staging-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1703 commits)
  staging: skein: fix sparse warning for static declarations
  staging/mt29f_spinand: coding style fixes
  staging: silicom: fix sparse warning for static variable
  staging: lustre: Fix coding style
  staging: android: binder.c: Use more appropriate functions for euid retrieval
  staging: lustre: fix integer as NULL pointer warnings
  Revert "staging: dgap: remove unneeded kfree() in dgap_tty_register_ports()"
  Staging: rtl8192u: r8192U_wx.c Fixed a misplaced brace
  staging: ion: shrink highmem pages on kswapd
  staging: ion: use compound pages on high order pages for system heap
  staging: ion: remove struct ion_page_pool_item
  staging: ion: simplify ion_page_pool_total()
  staging: ion: tidy up a bit
  staging: rtl8723au: Remove redundant casting in usb_ops_linux.c
  staging: rtl8723au: Remove redundant casting in rtl8723a_hal_init.c
  staging: rtl8723au: Remove redundant casting in rtw_xmit.c
  staging: rtl8723au: Remove redundant casting in rtw_wlan_util.c
  staging: rtl8723au: Remove redundant casting in rtw_sta_mgt.c
  staging: rtl8723au: Remove redundant casting in rtw_recv.c
  staging: rtl8723au: Remove redundant casting in rtw_mlme.c
  ...

Merge tag 'driver-core-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into next

Pull driver core / kernfs changes from Greg KH:
 "Here is the "big" pull request for 3.16-rc1.

  Not a lot of changes here, some kernfs work, a revert of a very old
  driver core change that ended up cauing some memory leaks on driver
  probe error paths, and other minor things.

  As was pointed out earlier today, one commit here, 26fc9cd2
  ("kernfs: move the last knowledge of sysfs out from kernfs") is also
  needed in your 3.15-final branch as well.  If you could cherry-pick it
  there, it would be most appreciated by Andy Lutomirski to prevent a
  regression there.

  All of these have been in linux-next for a while"

* tag 'driver-core-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  crypto/nx/nx-842: dev_set_drvdata can no longer fail
  kernfs: move the last knowledge of sysfs out from kernfs
  sysfs: fix attribute_group bin file path on removal
  sysfs.h: don't return a void-valued expression in sysfs_remove_file
  init.h: Update initcall_sync variants to fix build errors
  driver core: Inline dev_set/get_drvdata
  driver core: dev_get_drvdata: Don't check for NULL dev
  driver core: dev_set_drvdata returns void
  driver core: dev_set_drvdata can no longer fail
  driver core: Move driver_data back to struct device
  lib/devres.c: fix checkpatch warnings
  lib/devres.c: use dev in devm_request_and_ioremap
  kobject: Make support for uevent_helper optional.
  kernfs: make kernfs_notify() trigger inotify events too
  kernfs: implement kernfs_root->supers list

Merge tag 'char-misc-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into next

Pull char/misc driver patches from Greg KH:
 "Here is the big char / misc driver update for 3.16-rc1.

  Lots of different driver updates for a variety of different drivers
  and minor driver subsystems.

  All have been in linux-next with no reported issues"

* tag 'char-misc-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (79 commits)
  hv: use correct order when freeing monitor_pages
  spmi: of: fixup generic SPMI devicetree binding example
  applicom: dereferencing NULL on error path
  misc: genwqe: fix uninitialized return value in genwqe_free_sync_sgl()
  miscdevice.h: Simple syntax fix to make pointers consistent.
  MAINTAINERS: Add miscdevice.h to file list for char/misc drivers.
  mcb: Add support for shared PCI IRQs
  drivers: Remove duplicate conditionally included subdirs
  misc: atmel_pwm: only build for supported platforms
  mei: me: move probe quirk to cfg structure
  mei: add per device configuration
  mei: me: read H_CSR after asserting reset
  mei: me: drop harmful wait optimization
  mei: me: fix hw ready reset flow
  mei: fix memory leak of mei_clients array
  uio: fix vma io range check in mmap
  drivers: uio_dmem_genirq: Fix memory leak in uio_dmem_genirq_probe()
  w1: do not unlock unheld list_mutex in __w1_remove_master_device()
  w1: optional bundling of netlink kernel replies
  connector: allow multiple messages to be sent in one packet
  ...

Pull m68knommu updates from Greg Ungerer:
 "Nothing too big, just a handfull of small changes.

  A couple of dragonball fixes, coldfire qspi cleanup and fixes, and
  some coldfire gpio cleanup, fixes and extensions"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: Implement gpio support for m54xx.
  m68knommu: Make everything thats not exported, static.
  m68knommu: setting the gpio data direction register to output doesn't dependent upon the value to output!
  m68knommu: add to_irq function so we can map gpios to external interrupts.
  m68knommu: qspi declutter.
  m68knommu: Fix the 5249/525x qspi base address.
  m68knommu: Add qspi clk for Coldfire SoCs without real clks.
  m68k: fix a compiler warning when building for DragonBall
  m68knommu: Fix mach_sched_init for EZ and VZ DragonBall chips

Pull ARM SoC driver changes from Olof Johansson:
 "SoC-near driver changes that we're merging through our tree.  Mostly
  because they depend on other changes we have staged, but in some cases
  because the driver maintainers preferred that we did it this way.

  This contains a largeish cleanup series of the omap_l3_noc bus driver,
  cpuidle rework for Exynos, some reset driver conversions and a long
  branch of TI EDMA fixes and cleanups, with more to come next release.

  The TI EDMA cleanups is a shared branch with the dmaengine tree, with
  a handful of Davinci-specific fixes on top.

  After discussion at last year's KS (and some more on the mailing
  lists), we are here adding a drivers/soc directory.  The purpose of
  this is to keep per-vendor shared code that's needed by different
  drivers but that doesn't fit into the MFD (nor drivers/platform)
  model.  We expect to keep merging contents for this hierarchy through
  arm-soc so we can keep an eye on what the vendors keep adding here and
  not making it a free-for-all to shove in crazy stuff"

* tag 'drivers-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM
  tty: serial: msm: Remove direct access to GSBI
  power: reset: keystone-reset: introduce keystone reset driver
  Documentation: dt: add bindings for keystone pll control controller
  Documentation: dt: add bindings for keystone reset driver
  soc: qcom: fix of_device_id table
  ARM: EXYNOS: Fix kernel panic when unplugging CPU1 on exynos
  ARM: EXYNOS: Move the driver to drivers/cpuidle directory
  ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c
  ARM: EXYNOS: Pass the AFTR callback to the platform_data
  ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c
  ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier
  ARM: EXYNOS: Move the AFTR state function into pm.c
  ARM: EXYNOS: Encapsulate the AFTR code into a function
  ARM: EXYNOS: Disable cpuidle for exynos5440
  ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle
  ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle
  ARM: EXYNOS: Remove ifdef for scu_enable in pm
  ARM: EXYNOS: Move scu_enable in the cpu_pm notifier
  ARM: EXYNOS: Use the cpu_pm notifier for pm
  ...

Pull ARM SoC devicetree updates from Olof Johansson:
 "As with previous release, this continues to be among the largest
  branches we merge, with lots of new contents.

  New things for this release are among other things:

   - DTSI contents for the new SoCs supported in 3.16 (see SoC pull request)
   - Qualcomm APQ8064 and APQ8084 SoCs and eval boards
   - Nvidia Jetson TK1 development board (Tegra T124-based)

  Two new SoCs that didn't need enough new platform code to stand out
  enough for me to notice when writing the SoC tag, but that adds new DT
  contents are:

   - TI DRA72
   - Marvell Berlin 2Q"

* tag 'dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (500 commits)
  ARM: dts: add secure firmware support for exynos5420-arndale-octa
  ARM: dts: add pmu sysreg node to exynos3250
  ARM: dts: correct the usb phy node in exynos5800-peach-pi
  ARM: dts: correct the usb phy node in exynos5420-peach-pit
  ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
  ARM: dts: add dts files for exynos3250 SoC
  ARM: dts: add mfc node for exynos5800
  ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi
  ARM: dts: enable fimd for exynos5800-peach-pi
  ARM: dts: enable display controller for exynos5800-peach-pi
  ARM: dts: enable hdmi for exynos5800-peach-pi
  ARM: dts: add dts file for exynos5800-peach-pi board
  ARM: dts: add dts file for exynos5800 SoC
  ARM: dts: add dts file for exynos5260-xyref5260 board
  ARM: dts: add dts files for exynos5260 SoC
  ARM: dts: update watchdog node name in exynos5440
  ARM: dts: use key code macros on Origen and Arndale boards
  ARM: dts: enable RTC and WDT nodes on Origen boards
  ARM: dts: qcom: Add APQ8084-MTP board support
  ARM: dts: qcom: Add APQ8084 SoC support
  ...

Merge tag 'defconfig-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull ARM SoC defconfig updates from Olof Johansson:
 "A number of defconfig updates for 3.16.  We have quite a few of these
  as new SoCs and drivers get supported, and we've started collecting
  them in one shared branch.

  We started halfway through the merge window so there'll be some small
  conflicts with other branches on nearby changes, but nothing major.
  Next cycle should be smoother"

* tag 'defconfig-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: multi_v7_defconfig: Enable Exynos platform
  ARM: configs: update Allwinner options
  ARM: qcom: Enable GSBI driver in defconfig
  ARM: multi_v7_defconfig: Enable Zynq peripheral drivers
  ARM: at91/defconfig: sama5_defconfig: updated
  ARM: add drivers for Colibri T30 to multi_v7_defconfig
  ARM: configs: add CONFIG_MMC_SDHCI_PXAV3 to the multi_v7_defconfig
  ARM: configs: enable XHCI mvebu support in multi_v7_defconfig
  ARM: multi_v7: Add Allwinner reset drivers to multi_v7_defconfig
  ARM: sunxi: Add A31 reset driver to sunxi_defconfig
  ARM: config: Update msm_defconfig
  ARM: mvebu: enable MSI support in mvebu_v7_defconfig
  ARM: config: Add qcom_defconfig
  ARM: configs: enable XHCI mvebu support in mvebu_v7_defconfig

Pull ARM SoC board support updates from Olof Johansson:
 "The bulk of this branch is updates for Renesas Shmobile.  They are
  still doing some enablement for classic boards first, and then come up
  with DT bindings when they've had a chance to learn more about the
  hardware.  Not necessarily a bad way to go about it, and they're
  looking at moving some of the temporary board code resulting from it
  to drivers/staging instead to avoid the churn here.

  As a result of the shmobile clock cleanups, we end up merging quite a
  bit of SH code here as well.  We ended up merging it here instead of
  in the cleanup branch due to the other board changes depending on it"

* tag 'boards-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (130 commits)
  ARM: davinci: remove checks for CONFIG_USB_MUSB_PERIPHERAL
  ARM: add drivers for Colibri T30 to multi_v7_defconfig
  ARM: shmobile: Remove Genmai reference DTS
  ARM: shmobile: Let Genmai multiplatform boot with Genmai DTB
  ARM: shmobile: Sync Genmai DTS with Genmai reference DTS
  ARM: shmobile: genmai-reference: Remove legacy clock support
  ARM: shmobile: Remove non-multiplatform Genmai reference support
  ARM: configs: enable XHCI mvebu support in multi_v7_defconfig
  ARM: OMAP: replace checks for CONFIG_USB_GADGET_OMAP
  ARM: OMAP: AM3517EVM: remove check for CONFIG_PANEL_SHARP_LQ043T1DG01
  ARM: OMAP: SX1: remove check for CONFIG_SX1_OLD_FLASH
  ARM: OMAP: remove some dead code
  ARM: OMAP: omap3stalker: remove two Kconfig macros
  ARM: tegra: tegra_defconfig updates
  ARM: shmobile: r7s72100: use workaround for non DT-clocks
  ARM: shmobile: Add forward declaration of struct clk to silence warning
  ARM: shmobile: r7s72100: remove SPI DT clocks from legacy clock support
  ARM: shmobile: r7s72100: add spi clocks to dtsi
  ARM: shmobile: r7s72100: remove I2C DT clocks from legacy clock support
  ARM: shmobile: r7s72100: add i2c clocks to dtsi
  ...

Pull part one of ARM SoC updates from Olof Johansson:
 "A quite large set of SoC updates this cycle.  In no particular order:

   - Multi-cluster power management for Samsung Exynos, adding support
     for big.LITTLE CPU switching on EXYNOS5

   - SMP support for Marvell Armada 375 and 38x

   - SMP rework on Allwinner A31

   - Xilinx Zynq support for SOC_BUS, big endian

   - Marvell orion5x platform cleanup, modernizing the implementation
     and moving to DT.

   - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
     that their platform can be enabled in the same kernel binary as
     most of the other v7 platforms in the tree.  \o/

     The work isn't quite complete, there's some driver fixes still
     needed, but the basics now work.

  New SoC support added:

   - Freescale i.MX6SX

   - LSI Axxia AXM55xx SoCs

   - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800

   - STi STIH407

  plus a large set of various smaller updates for different platforms.
  I'm probably missing some important one here"

* tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits)
  ARM: exynos: don't run exynos4 l2x0 setup on other platforms
  ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug
  ARM: EXYNOS: mcpm rename the power_down_finish
  ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
  ARM: EXYNOS: Enable multi-platform build support
  ARM: EXYNOS: Consolidate Kconfig entries
  ARM: EXYNOS: Add support for EXYNOS5410 SoC
  ARM: EXYNOS: Support secondary CPU boot of Exynos3250
  ARM: EXYNOS: Add Exynos3250 SoC ID
  ARM: EXYNOS: Add 5800 SoC support
  ARM: EXYNOS: initial board support for exynos5260 SoC
  clk: exynos5410: register clocks using common clock framework
  ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
  ARM: sunxi: allow building without reset controller
  Documentation: devicetree: arm: sort enable-method entries
  ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE
  clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
  ARM: dts: axxia: Add reset controller
  power: reset: Add Axxia system reset driver
  ARM: axxia: Adding defconfig for AXM55xx
  ...

Pull ARM SoC cleanups from Olof Johansson:
 "Cleanups for 3.16.  Among these are:

   - a bunch of misc cleanups for Broadcom platforms, mostly
     housekeeping
   - enabling Common Clock Framework on the older s3c24xx Samsung
     chipsets
   - cleanup of the Versatile Express system controller code, moving it
     to syscon
   - power management cleanups for OMAP platforms

  plus a handful of other cleanups across the place"

* tag 'cleanup-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
  ARM: kconfig: allow PCI support to be selected with ARCH_MULTIPLATFORM
  clk: samsung: fix build error
  ARM: vexpress: refine dependencies for new code
  clk: samsung: clk-s3c2410-dlck: do not use PNAME macro as it declares __initdata
  cpufreq: exynos: Fix the compile error
  ARM: S3C24XX: move debug-macro.S into the common space
  ARM: S3C24XX: use generic DEBUG_UART_PHY/_VIRT in debug macro
  ARM: S3C24XX: trim down debug uart handling
  ARM: compressed/head.S: remove s3c24xx special case
  ARM: EXYNOS: Remove unnecessary inclusion of cpu.h
  ARM: EXYNOS: Migrate Exynos specific macros from plat to mach
  ARM: EXYNOS: Remove exynos_subsys registration
  ARM: EXYNOS: Remove duplicate lines in Makefile
  ARM: EXYNOS: use v7_exit_coherency_flush macro for cache disabling
  ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files
  ARM: OMAP3/4: PRM: add support of late_init call to prm_ll_ops
  ARM: OMAP3/OMAP4: PRM: add prm_features flags and add IO wakeup under it
  ARM: OMAP3/4: PRM: provide io chain reconfig function through irq setup
  ARM: OMAP2+: PRM: remove unnecessary cpu_is_XXX calls from prm_init / exit
  ARM: OMAP2+: PRCM: cleanup some header includes
  ...

Pull ARM SoC low-priority fixes from Olof Johansson:
 "A small selection of fixes coming in late during the release cycle and
  not being critical enough for 3.15 inclusion"

* tag 'fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: shmobile: armadillo800eva: fixup HDMI sound flags setting
  ARM: msm: Silence readb/writeb warnings due to missing IOMEM()
  ARM: dts: am43xx: fix starting offset of NAND.filesystem MTD partition
  ARM: dts: am335x-boneblack: remove use of ti,vcc-aux-disable-is-sleep
  ARM: OMAP2+: free use_gptimer_clksrc variable after boot
  ARM: OMAP5: Redo THUMB mode switch on secondary CPU
  ARM: dts: AM4372: add l3-noc information
  ARM: dts: DRA7: Use dra7-l3-noc instead of omap4-l3-noc
  reset: Add of_reset_control_get to reset.h

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull block driver changes from Jens Axboe:
 "Now that the core bits are in, here's the pull request for the driver
  related changes for 3.16.  Nothing out of the ordinary here, mostly
  business as usual.  There are a few pulls of for-3.16/core into this
  branch, which were done when the blk-mq was modified after the
  mtip32xx conversion was put in.

  The pull request contains:

   - skd and cciss converted to use pci_enable_msix_exact().  From
     Alexander Gordeev.

   - A few mtip32xx fixes from Asai @ Micron.

   - The conversion of mtip32xx from make_request_fn to blk-mq, and a
     later small fix for that conversion on quiescing for non-queued IO.
     From me.

   - A fix for bsg to use an exported function to check whether this
     driver is request based or not.  Needed updating for blk-mq, which
     is request based, but does not have a request_fn hook.  From me.

   - Small floppy bug fix from Jiri.

   - A series of cleanups for the cdrom uniform layer from Joe Perches.
     Gets rid of various old ugly macros, making the code conform more
     to the modern coding style.

   - A series of patches for drbd from the drbd crew (Lars Ellenberg and
     Philipp Reisner).

   - A use-after-free fix for null_blk from Ming Lei.

   - Also from Ming Lei is a performance patch for virtio-blk, which can
     net us a 3x win on kvm platforms where world notification is
     expensive.

   - Ming Lei also fixed a stall issue in virtio-blk, due to a race
     between queue start/stop and resource limits.

   - A small batch of fixes for xen-blk{back,front} from Olaf Hering and
     Valentin Priescu"

* 'for-3.16/drivers' of git://git.kernel.dk/linux-block: (54 commits)
  block: virtio_blk: don't hold spin lock during world switch
  xen-blkback: defer freeing blkif to avoid blocking xenwatch
  xen blkif.h: fix comment typo in discard-alignment
  xen/blkback: disable discard feature if requested by toolstack
  xen-blkfront: remove type check from blkfront_setup_discard
  floppy: do not corrupt bio.bi_flags when reading block 0
  mtip32xx: move error handling to service thread
  virtio_blk: fix race between start and stop queue
  mtip32xx: stop block hardware queues before quiescing IO
  mtip32xx: blk_mq_init_queue() returns an ERR_PTR
  mtip32xx: convert to use blk-mq
  cdrom: Remove unnecessary prototype for cdrom_get_disc_info
  cdrom: Remove unnecessary prototype for cdrom_mrw_exit
  cdrom: Remove cdrom_count_tracks prototype
  cdrom: Remove cdrom_get_next_writeable prototype
  cdrom: Remove cdrom_get_last_written prototype
  cdrom: Move mmc_ioctls above cdrom_ioctl to remove unnecessary prototype
  cdrom: Remove unnecessary sanitize_format prototype
  cdrom: Remove unnecessary check_for_audio_disc prototype
  cdrom: Remove prototype for open_for_data
  ...

Merge tag 'pci-v3.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into next

Pull PCI changes from Bjorn Helgaas:
 "Enumeration
    - Notify driver before and after device reset (Keith Busch)
    - Use reset notification in NVMe (Keith Busch)

  NUMA
    - Warn if we have to guess host bridge node information (Myron Stowe)
    - Work around AMD Fam15h BIOSes that fail to provide _PXM (Suravee
      Suthikulpanit)
    - Clean up and mark early_root_info_init() as deprecated (Suravee
      Suthikulpanit)

  Driver binding
    - Add "driver_override" for force specific binding (Alex Williamson)
    - Fail "new_id" addition for devices we already know about (Bandan
      Das)

  Resource management
    - Support BAR sizes up to 8GB (Nikhil Rao, Alan Cox)
    - Don't move IORESOURCE_PCI_FIXED resources (Bjorn Helgaas)
    - Mark SBx00 HPET BAR as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
    - Fail safely if we can't handle BARs larger than 4GB (Bjorn Helgaas)
    - Reject BAR above 4GB if dma_addr_t is too small (Bjorn Helgaas)
    - Don't convert BAR address to resource if dma_addr_t is too small
      (Bjorn Helgaas)
    - Don't set BAR to zero if dma_addr_t is too small (Bjorn Helgaas)
    - Don't print anything while decoding is disabled (Bjorn Helgaas)
    - Don't add disabled subtractive decode bus resources (Bjorn Helgaas)
    - Add resource allocation comments (Bjorn Helgaas)
    - Restrict 64-bit prefetchable bridge windows to 64-bit resources
      (Yinghai Lu)
    - Assign i82875p_edac PCI resources before adding device (Yinghai Lu)

  PCI device hotplug
    - Remove unnecessary "dev->bus" test (Bjorn Helgaas)
    - Use PCI_EXP_SLTCAP_PSN define (Bjorn Helgaas)
    - Fix rphahp endianess issues (Laurent Dufour)
    - Acknowledge spurious "cmd completed" event (Rajat Jain)
    - Allow hotplug service drivers to operate in polling mode (Rajat Jain)
    - Fix cpqphp possible NULL dereference (Rickard Strandqvist)

  MSI
    - Replace pci_enable_msi_block() by pci_enable_msi_exact()
      (Alexander Gordeev)
    - Replace pci_enable_msix() by pci_enable_msix_exact() (Alexander Gordeev)
    - Simplify populate_msi_sysfs() (Jan Beulich)

  Virtualization
    - Add Intel Patsburg (X79) root port ACS quirk (Alex Williamson)
    - Mark RTL8110SC INTx masking as broken (Alex Williamson)

  Generic host bridge driver
    - Add generic PCI host controller driver (Will Deacon)

  Freescale i.MX6
    - Use new clock names (Lucas Stach)
    - Drop old IRQ mapping (Lucas Stach)
    - Remove optional (and unused) IRQs (Lucas Stach)
    - Add support for MSI (Lucas Stach)
    - Fix imx6_add_pcie_port() section mismatch warning (Sachin Kamat)

  Renesas R-Car
    - Add gen2 device tree support (Ben Dooks)
    - Use new OF interrupt mapping when possible (Lucas Stach)
    - Add PCIe driver (Phil Edworthy)
    - Add PCIe MSI support (Phil Edworthy)
    - Add PCIe device tree bindings (Phil Edworthy)

  Samsung Exynos
    - Remove unnecessary OOM messages (Jingoo Han)
    - Fix add_pcie_port() section mismatch warning (Sachin Kamat)

  Synopsys DesignWare
    - Make MSI ISR shared IRQ aware (Lucas Stach)

  Miscellaneous
    - Check for broken config space aliasing (Alex Williamson)
    - Update email address (Ben Hutchings)
    - Fix Broadcom CNB20LE unintended sign extension (Bjorn Helgaas)
    - Fix incorrect vgaarb conditional in WARN_ON() (Bjorn Helgaas)
    - Remove unnecessary __ref annotations (Bjorn Helgaas)
    - Add arch/x86/kernel/quirks.c to MAINTAINERS PCI file patterns
      (Bjorn Helgaas)
    - Fix use of uninitialized MPS value (Bjorn Helgaas)
    - Tidy x86/gart messages (Bjorn Helgaas)
    - Fix return value from pci_user_{read,write}_config_*() (Gavin Shan)
    - Turn pcibios_penalize_isa_irq() into a weak function (Hanjun Guo)
    - Remove unused serial device IDs (Jean Delvare)
    - Use designated initialization in PCI_VDEVICE (Mark Rustad)
    - Fix powerpc NULL dereference in pci_root_buses traversal (Mike Qiu)
    - Configure MPS on ARM (Murali Karicheri)
    - Remove unnecessary includes of <linux/init.h> (Paul Gortmaker)
    - Move Open Firmware devspec attribute to PCI common code (Sebastian Ott)
    - Use pdev->dev.groups for attribute creation on s390 (Sebastian Ott)
    - Remove pcibios_add_platform_entries() (Sebastian Ott)
    - Add new ID for Intel GPU "spurious interrupt" quirk (Thomas Jarosch)
    - Rename pci_is_bridge() to pci_has_subordinate() (Yijing Wang)
    - Add and use new pci_is_bridge() interface (Yijing Wang)
    - Make pci_bus_add_device() void (Yijing Wang)

  DMA API
    - Clarify physical/bus address distinction in docs (Bjorn Helgaas)
    - Fix typos in docs (Emilio López)
    - Update dma_pool_create ()and dma_pool_alloc() descriptions (Gioh Kim)
    - Change dma_declare_coherent_memory() CPU address to phys_addr_t
      (Bjorn Helgaas)
    - Pass GAPSPCI_DMA_BASE CPU & bus address to dma_declare_coherent_memory()
      (Bjorn Helgaas)"

* tag 'pci-v3.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits)
  MAINTAINERS: Add generic PCI host controller driver
  PCI: generic: Add generic PCI host controller driver
  PCI: imx6: Add support for MSI
  PCI: designware: Make MSI ISR shared IRQ aware
  PCI: imx6: Remove optional (and unused) IRQs
  PCI: imx6: Drop old IRQ mapping
  PCI: imx6: Use new clock names
  i82875p_edac: Assign PCI resources before adding device
  ARM/PCI: Call pcie_bus_configure_settings() to set MPS
  PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning
  PCI: Make pci_bus_add_device() void
  PCI: exynos: Fix add_pcie_port() section mismatch warning
  PCI: Introduce new device binding path using pci_dev.driver_override
  PCI: rcar: Add gen2 device tree support
  PCI: cpqphp: Fix possible null pointer dereference
  PCI: rcar: Add R-Car PCIe device tree bindings
  PCI: rcar: Add MSI support for PCIe
  PCI: rcar: Add Renesas R-Car PCIe driver
  PCI: Fix return value from pci_user_{read,write}_config_*()
  PCI: exynos: Remove unnecessary OOM messages
  ...