- 19 Sep, 2016 40 commits
-
-
Dmitry Eremin authored
Change the type accordant usage. Signed-off-by:
Dmitry Eremin <dmitry.eremin@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5577 Reviewed-on: http://review.whamcloud.com/12385Reviewed-by:
Bob Glossman <bob.glossman@intel.com> Reviewed-by:
John L. Hammond <john.hammond@intel.com> Reviewed-by:
Oleg Drokin <oleg.drokin@intel.com> Signed-off-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bob Glossman authored
The name 'xattr' is used for two different ll_flags bits. Change the names to be distinct and different, reflecting the names of the bits used in LL_SBI_xbitnamex #defines. Signed-off-by:
Minh Diep <minh.diep@intel.com> Reviewed-by:
Jian Yu <jian.yu@intel.com> Reviewed-by:
-
frank zago authored
llog_process_thread() can be called from llog_cat_process_cb with an index already out of bound, leading to the following crash: LustreError: 3773:0:(llog.c:310:llog_process_thread()) ASSERTION(index <= last_index + 1 ) failed: LustreError: 3773:0:(llog.c:310:llog_process_thread()) LBUG #0 [ffff8801144bf900] machine_kexec at ffffffff81038f3b #1 [ffff8801144bf960] crash_kexec at ffffffff810c5d82 #2 [ffff8801144bfa30] panic at ffffffff8152798a #3 [ffff8801144bfab0] lbug_with_loc at ffffffffa02f8eeb [libcfs] #4 [ffff8801144bfad0] llog_process_thread at ffffffffa0413fff [obdclass] #5 [ffff8801144bfb80] llog_process_or_fork at ffffffffa041585f [obdclass] #6 [ffff8801144bfbd0] llog_cat_process_cb at ffffffffa0418612 [obdclass] #7 [ffff8801144bfc30] llog_process_thread at ffffffffa0413c22 [obdclass] #8 [ffff8801144bfce0] llog_process_or_fork at ffffffffa041585f [obdclass] #9 [ffff8801144bfd30] llog_cat_process_or_fork at ffffffffa0416b9d [obdclass] If index is too big, simply return success. Signed-off-by:
frank zago <fzago@cray.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5635 Reviewed-on: http://review.whamcloud.com/12161Reviewed-by:
Jinshan Xiong <jinshan.xiong@intel.com> Reviewed-by:
Patrick Farrell <paf@cray.com> Reviewed-by:
-
Andreas Dilger authored
It may be that a client or MDS is trying to connect to a target (OST or peer MDT) before that target is finished setup. Rather than spamming the console logs during initial connection, only print a console error message if there are repeated failures trying to connect to the target, which may indicate an error on that node. Signed-off-by:
Andreas Dilger <andreas.dilger@intel.com> Signed-off-by:
Bobi Jam <bobijam.xu@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3456 Reviewed-on: http://review.whamcloud.com/10057Reviewed-by:
Bobi Jam <bobijam@gmail.com> Reviewed-by:
-
Jinshan Xiong authored
The changes for LRU lock policy was introduced by commit bfae5a4e, where I was trying to revise the policy to pick locks for canceling. However, this caused two problems as mentioned in LU-5727. The first problem is that the lock can only be picked for canceling only if the number of LRU locks is over preset LRU number AND it's aged; the second problem is that mdc_cancel_weight() tends to not cancel OPEN locks, therefore open locks can be kept forever and finally exhausts memory on the MDT side. The commit 7b2d26b0 ("revert changes to ldlm_cancel_aged_policy") fixed the first problem. This patch will revert the rest of changes related to LRU policy revise. Signed-off-by:
Niu Yawei <yawei.niu@intel.com> Reviewed-by:
-
Niu Yawei authored
To avoid scanning the replay open list every time in the ptlrpc_free_committed(), the fix of LU-2613 (4322e0f9) changed the ptlrpc_free_committed() to skip the open list unless the import generation is changed. That introduced a race which could make a closed open being replayed: 1. Application calls ll_close_inode_openhandle()-> mdc_close(), to close file, rq_replay is cleared, but the open request is still on the imp_committed_list; 2. Before the md_clear_open_replay_data() is called for close, client start replay, and that closed open will be replayed mistakenly; 3. Open replay interpret callback (mdc_replay_open) could race with the mdc_clear_open_replay_data() at the end; This patch fix the ptlrpc_free_committed() to make sure the open list is scanned on recovery to prevent the closed open request from being replayed. Signed-off-by:
Lai Siyao <lai.siyao@intel.com> Reviewed-by:
-
Henri Doreau authored
Fixed changelog_remap_rec() to correctly remap records emitted with jobid_var=disabled, i.e. delivered by new servers but with no jobid field. Signed-off-by:
Henri Doreau <henri.doreau@cea.fr> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5862 Reviewed-on: http://review.whamcloud.com/12574Reviewed-by:
Robert Read <robert.read@intel.com> Signed-off-by:
-
John L. Hammond authored
Remove ll_objects_destroy(). This function is not needed for interoperability with servers of version 2.4 or higher. Remove the then unused function lov_destroy() and its supporting functions. Remove the lsm_destroy method of struct lsm_operations. Remove the unused struct lov_stripe_md, MD export, and capa parameters from obd_destroy() and its implementations. Signed-off-by:
-
John L. Hammond authored
In echo_client replace uses of struct lov_stripe_md with struct lov_oinfo (since the instances of the former really only contained a single instance of the latter). Remove the then unneccessary functions echo_alloc_memmd(), echo_free_memmd(), osc_unpackmd(), and obd_alloc_memmd(). Remove the struct lov_stripe_md * parameter from obd_create(). Signed-off-by:
-
John L. Hammond authored
Remove no longer used osc_packmd() and osc_getstripe(). Several ioctls cases that are no longer used are removed. Remove no longer used adjust_kms() infrastructure. Signed-off-by:
-
Lai Siyao authored
small fixes: * when 'unplug' is set for ll_statahead(), sa_put() shouldn't kill the entry found, because its inflight RPC may not finish yet. * remove 'sai_generation', add 'lli_sa_generation' because the former one is not safe to access without lock. * revalidate_statahead_dentry() may fail to wait for statahead entry to become ready, in this case it should not release this entry, because it may be used by inflight statahead RPC. cleanups: * rename ll_statahead_enter() to ll_statahead(). * move dentry 'lld_sa_generation' update to ll_statahead() to simplify code and logic. * other small cleanups. Signed-off-by:
Fan Yong <fan.yong@intel.com> Reviewed-by:
Bobi Jam <bobijam@hotmail.com> Reviewed-by:
James Simmons <uja.ornl@gmail.com> Reviewed-by:
-
John L. Hammond authored
Restore the trailing newline in the definition of OSC_DUMP_GRANT(). Remove an unnecessary CDEBUG() from ldlm_pool_recalc(). Signed-off-by:
James Nunez <james.a.nunez@intel.com> Reviewed-by:
-
John L. Hammond authored
In LOV and OSC remove handlers for the obsolete get and set info keys: KEY_CAPA_KEY, KEY_CONNECT_FLAG, KEY_EVICT_BY_NID, KEY_LAST_ID, KEY_LOCK_TO_STRIPE, KEY_MDS_CONN, KEY_NEXT_ID. Signed-off-by:
-
Dmitry Eremin authored
Change type of changelog_*{namelen,size}() to size_t. Fixed string specifier for unsigned types. Signed-off-by: -
John L. Hammond authored
Remove the obsolete ioctls LL_IOC_RECREATE_FID and LL_IOC_RECREATE_OBJ along with their handlers in llite. Remove the then unused OBD method lov_create(). Remove OBD_FL_RECREATE_OBJS handling from osc_create(). Signed-off-by:
-
Dmitry Eremin authored
Change the type accordant usage. Signed-off-by:
-
Dmitry Eremin authored
Change the type accordant usage. Signed-off-by:
-
Dmitry Eremin authored
Function ldlm_pools_count() return unsigned long but counter is int. Use ldlm_pool_granted() everywhere. Signed-off-by:
-
Jian Yu authored
On some customer's systems, kernel was compiled with HZ defined to 100, instead of 1000. This improves performance for HPC applications. However, to use these systems with Lustre, customers have to re-build Lustre for the kernel because Lustre directly uses the defined constant HZ. Since kernel 2.6.21, some non-HZ dependent timing APIs become non- inline functions, which can be used in Lustre codes to replace the direct HZ access. These kernel APIs include: jiffies_to_msecs() jiffies_to_usecs() jiffies_to_timespec() msecs_to_jiffies() usecs_to_jiffies() timespec_to_jiffies() And here are some samples of the replacement: HZ -> msecs_to_jiffies(MSEC_PER_SEC) n * HZ -> msecs_to_jiffies(n * MSEC_PER_SEC) HZ / n -> msecs_to_jiffies(MSEC_PER_SEC / n) n / HZ -> jiffies_to_msecs(n) / MSEC_PER_SEC n / HZ * 1000 -> jiffies_to_msecs(n) This patch replaces the direct HZ access in lustre modules. Signed-off-by:
Nathaniel Clark <nathaniel.l.clark@intel.com> Reviewed-by:
-
John L. Hammond authored
Make the following changes in or around struct md_op_data: * rename enum op_cli_flags to enum md_cli_flags. * Change to type of the op_flags member from __u32 to enum md_op_flags. * Remove the used but never set member op_npages. * Remove the set but never used member op_stripe_offset (an alias for op_ioepoch). * Remove the op_max_pages alias for op_valid and add a op_max_pages member. Signed-off-by:
-
Dmitry Eremin authored
Change type of client_obd->*_mds_*size from int to __u32 and argumanets of related create/rename/setattr functions. Change type of op_data->op_namelen to size_t. Change type of argument size for all mdc_*_pack() to size_t. Signed-off-by:
-
Alexander Boyko authored
Once connected, the previously gathered AT statistics is not valid anymore because may reflect other routing, etc. The connect by itself could take a long time due to different reasons (e.g. server was not ready) and net latency got very high (see import_select_connection()) what does not reflect the current situation. Take into account only the current (re-)CONNECT rpc latency. Signed-off-by:
Vitaly Fertman <vitaly_fertman@xyratex.com> Signed-off-by:
Alexander Boyko <alexander_boyko@xyratex.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5380 Xyratex-bug-id: MRP-1285 Reviewed-on: http://review.whamcloud.com/11155Reviewed-by:
Liang Zhen <liang.zhen@intel.com> Reviewed-by:
Mike Pershin <mike.pershin@intel.com> Signed-off-by:
-
Lai Siyao authored
When starting statahead thread, it should check whether current lli_opendir_key was deauthorized in the mean time by another process. Signed-off-by:
-
Lai Siyao authored
ll_intent_drop_lock() may sleep, which should not be called inside spinlock. Signed-off-by:
-
Lai Siyao authored
Rename ll_sa_entry to sa_entry, and manage sa_entry cache with dcache-like interfaces. sa_entry is not needed to be refcounted, because only scanner can free it, so after it's put in stat list, statahead thread shouldn't access it any longer. ll_statahead_interpret() doesn't need to take sai refcount, because statahead thread will wait for all inflight RPC to finish. Signed-off-by:
-
Jinshan Xiong authored
Extend the llite layer to support specifying individual target OSTs. Support specifying OSTs for regular files only. Directory support will be implemented later in a separate project. With this a file could have for example a OST index layout of 2,4,5,9,11. In addition, duplicate indices will be eliminated automatically. Calculate the max easize by ld_active_tgt_count instead of ld_tgt_count. However this may introduce problems when the OSTs are in recovery because non sufficient buffer may be allocated to store EA. Signed-off-by:
-
Henri Doreau authored
Added LL_IOC_GETPARENT to retrieve the <parent_fid>/name(s) of a given entry, based on its link EA. This saves multiple calls to path2fid/fid2path. Merged with second later patch that does various cleanups. Avoid unneeded allocation. Get read-only attributes from the user getparent structure and write the modified attributes only, instead of populating a whole structure in kernel and copying it back. Signed-off-by:
Thomas Leibovici <thomas.leibovici@cea.fr> Signed-off-by:
Ned Bass <bass6@llnl.gov> Reviewed-by:
-
James Simmons authored
Original linkea was only used for the lustre server code so it was removed from the upstream client. Now it needs to be restored for client work that uses this infrastructure. Signed-off-by:
-
Fan Yong authored
Enable testing of the lfsck recovery feature in the client code for the case when name hash for some entry becomes corrupt. Signed-off-by:
Alex Zhuravlev <alexey.zhuravlev@intel.com> Reviewed-by:
-
Yang Sheng authored
Write out all extents when clear inode. Otherwise we may lose data while umount. Signed-off-by:
Yang Sheng <yang.sheng@intel.com> Signed-off-by:
-
Vitaly Fertman authored
The lock callback timeout is calculated as an average per namespace. This does not reflect individual client behavior. Instead, we should calculate it on a per-export basis. This is the client side changes for upstream client. Signed-off-by:
Andriy Skulysh <Andriy_Skulysh@xyratex.com> Reviewed-by:
Alexey Lyashkov <Alexey_Lyashkov@xyratex.com> Xyratex-bug-id: MRP-417 Reviewed-on: http://review.whamcloud.com/9336Reviewed-by:
-
Fan Yong authored
Move some inline code out of lmv core into lustre_lmv.h. This is to prepare for use outside of the lmv layer in the future of these functions. Change from passing in struct lmv_stripe_md to just int for lmv_is_known_hash_type. Signed-off-by:
-
Henri Doreau authored
Added jobid fields to Changelog records (and extended records). The CLF_JOBID flags allows to check if the field is present or not (old format) when reading an entry. Jobids are expressed as 32 chars long, zero-terminated strings. Updated test_205 in sanity.sh. Signed-off-by:
Aurelien Degremont <aurelien.degremont@cea.fr> Signed-off-by:
-
Li Xi authored
The pool related codes have some inconsistency about the length of pool name. Creating and setting a pool name of length 16 to a directory will succeed. However, creating a file under that directory will fail. This patch disables any pool name which is longer or equal to 16. And it changes LOV_MAXPOOLNAME from 16 to 15 which might cause some invalid LLOG records of OST pools with 16 byte names. It is not a problem since invalid LLOG records are just ignored. And OST pools with 16 byte names won't work well anyway on the old versions. There will be problem of inconsistency if part of the servers have this patch and part of the servers don't. But it would be safe to assume that this is not a normal configuration. Signed-off-by:
Li Xi <lixi@ddn.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5054 Reviewed-on: http://review.whamcloud.com/10306Reviewed-by:
-
Stephen Champion authored
With the lockless __generic_file_aio_write introduced in LU-1669, ll_direct_IO_26 is no longer protected by the inode i_isem. This renders obsoltete checks that all transient pages have been handled before and after entry, and requires atomic access to their counter. Signed-off-by:
Stephen Champion <schamp@sgi.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5700 Reviewed-on: http://review.whamcloud.com/12179Reviewed-by:
-
Dmitry Eremin authored
The member lmv_obd->server_timeout and function lmv_set_timeouts() are not used. Signed-off-by:
-
Stephen Champion authored
When the number of an object in use or circulation is tied to memory size of the system, very large memory systems can overflow 32 bit counters. This patch addresses overflow on page counters in the osc LRU and obd accounting. Signed-off-by:
-
Dmitry Eremin authored
tgts_size is used as unsigned. Signed-off-by:
-
Dmitry Eremin authored
ltd_idx is used as unsigned. Signed-off-by:
-
John L. Hammond authored
In ll_iget() if ll_update_inode() fails then do not call make_bad_inode() on the inode since it may still be in use. Signed-off-by:
-
