- 12 Sep, 2020 13 commits
-
-
Grzegorz Jaszczyk authored
The IEPCLK_MUX is present on all SoCs whereas the CORECLK_MUX is present only on AM65x SoCs and J721E. Add support for both these CLK muxes. This allows the clock rates and clock parents for these to be controlled through DT leveraging the clk infrastructure for configuring the default parents and rates. Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com>
-
Grzegorz Jaszczyk authored
ICSS/ICSSG modules have an IEP clock mux that allow selection of internal IEP clock from 2 clock sources. ICSSG module has a CORE clock mux that allows selection of internal CORE clock from 2 clock sources. Add binding information for these 2 clock muxes. Signed-off-by:
-
Tero Kristo authored
If a clock is disabled, its frequency should be allowed to change as it is no longer in use. Add a flag towards this to the firmware clock API handler routines. Acked-by:
Nishanth Menon <nm@ti.com> Tested-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
Tero Kristo authored
Current implementation of the genpd support over TI SCI uses a single genpd across the whole SoC, and attaches multiple devices to this. This solution has its drawbacks, like it is currently impossible to attach more than one power domain to a device; the core genpd implementation requires one genpd per power-domain entry in DT for a single device. Also, some devices like USB apparently require their own genpd during probe time, the current shared approach in use does not work at all. Switch the implementation over to use a single genpd per power domain entry in DT. The domains are registered with the onecell approach, but we also add our own xlate service due to recent introduction of the extended flag for TI SCI PM domains; genpd core xlate service requires a single cell per powerdomain, but we are using two cells. Signed-off-by:
-
Suman Anna authored
The K3 J721E family of SoCs have a revised version of the PRU-ICSS (ICSSG) processor subsystem present on K3 AM65x SoCs. These SoCs contain typically two ICSSG instances named ICSSG0 and ICSSG1. The two ICSSGs are identical to each other for the most part with minor SoC integration differences and capabilities. The ICSSG1 supports slightly enhanced features like SGMII mode Ethernet, while the ICSSG0 instance is limited to MII mode only. There is no change in the Interrupt Controller w.r.t AM65x. All other integration aspects are very similar to the ICSSGs on AM65x SoCs. The existing pruss platform driver has been updated to support these new ICSSG instances through new J721E specific compatibles. Signed-off-by:
-
Suman Anna authored
The K3 AM65x family of SoCs have the next generation of the PRU-ICSS processor subsystem capable of supporting Gigabit Ethernet, and is commonly referred to as ICSSG. These SoCs contain typically three ICSSG instances named ICSSG0, ICSSG1 and ICSSG2. The three ICSSGs are identical to each other for the most part with minor SoC integration differences and capabilities. The ICSSG2 supports slightly enhanced features like SGMII mode Ethernet, while the ICSS0 and ICSSG1 instances are limited to MII mode only. The ICSSGs on K3 AM65x SoCs are in general super-sets of the PRUSS on the AM57xx/66AK2G SoCs. They include two additional auxiliary PRU cores called RTUs and few other additional sub-modules. The interrupt integration is also different on the K3 AM65x SoCs and are propagated through various SoC-level Interrupt Router and Interrupt Aggregator blocks. Other IP level differences include different constant tables, differences in system event interrupt input sources etc. They also do not have a programmable module reset line like those present on AM33xx/AM43xx SoCs. The modules are reset just like any other IP with the SoC's global cold/warm resets. The existing pruss platform driver has been updated to support these new ICSSG instances through new AM65x specific compatibles. A build dependency with ARCH_K3 is added to enable building all the existing PRUSS platform drivers for this ARMv8 platform. Signed-off-by:
-
Suman Anna authored
The 66AK2G SoC supports two PRU-ICSS instances, named PRUSS0 and PRUSS1, each of which has two PRU processor cores. The two PRU-ICSS instances are identical to each other with few minor SoC integration differences, and are very similar to the PRU-ICSS1 of AM57xx/AM43xx. The Shared Data RAM size is larger and the number of interrupts coming into MPU INTC is like the instances on AM437x. There are also few other differences attributing to integration in Keystone architecture (like no SYSCFG register or PRCM handshake protocols). Other IP level differences include different constant table, differences in system event interrupt input sources etc. They also do not have a programmable module reset line like those present on AM33xx/AM43xx SoCs. The modules are reset just like any other IP with the SoC's global cold/warm resets. The existing PRUSS platform driver has been enhanced to support these 66AK2G PRU-ICSS instances through new 66AK2G specific compatible for properly probing and booting all the different PRU cores in each PRU-ICSS processor subsystem. A build dependency with ARCH_KEYSTONE is added to enable the driver to be built in K2G-only configuration. Signed-off-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
-
Suman Anna authored
The AM57xx family of SoCs supports two PRU-ICSS instances, each of which has two PRU processor cores. The two PRU-ICSS instances are identical to each other, and are very similar to the PRU-ICSS1 of AM33xx/AM43xx except for a few minor differences like the RAM sizes and the number of interrupts coming into the MPU INTC. They do not have a programmable module reset line unlike those present on AM33xx/AM43xx SoCs. The modules are reset just like any other IP with the SoC's global cold/warm resets. Each PRU-ICSS's INTC is also preceded by a Crossbar that enables multiple external events to be routed to a specific number of input interrupt events. Any interrupt event directed towards PRUSS needs this crossbar to be setup properly on the firmware side. The existing PRUSS platform driver has been enhanced to support these AM57xx PRU-ICSS instances through new AM57xx specific compatible for properly probing and booting all the different PRU cores in each PRU-ICSS processor subsystem. A build dependency with SOC_DRA7XX is also added to enable the driver to be built in AM57xx-only configuration (there is no separate Kconfig option for AM57xx vs DRA7xx). Signed-off-by:
-
Suman Anna authored
The AM437x SoCs have two different PRU-ICSS subsystems: PRU-ICSS1 and a smaller PRU-ICSS0. Enhance the PRUSS platform driver to support both the PRU-ICSS sub-systems on these SoCs. The PRU-ICSS1 on AM437x is very similar to the PRU-ICSS on AM33xx except for few minor differences - increased Instruction RAM, increased Shared Data RAM2, and 1 less interrupt (PRUSS host interrupt 7 which is redirected to the other PRUSS) towards the MPU INTC. The PRU-ICSS0 is a cut-down version of the IP, with less DRAM per PRU, no Shared DRAM etc. It also does not have direct access to L3 bus regions, there is a single interface to L3 for both PRUSS0 and PRUSS1, and it would have to go through the PRUSS1's interface. The PRUSS_SYSCFG register is reserved on PRUSS0, so any external access requires the programming the corresponding PRUSS_SYSCFG register in PRUSS1. It does have its own dedicated I/O lines though. Note that this instance does not support any PRU Ethernet related use cases. The adaptation uses SoC-specific compatibles in the driver and uses a newly introduced pruss_match_private_data structure and the pruss_get_private_data() function to retrieve a PRUSS instance specific data using a device-name based lookup logic. The reset and the L3 external access are managed by the parent interconnect ti-sysc bus driver so that PRUSS1 and PRUSS0 can be independently supported. Signed-off-by:
-
Suman Anna authored
The Programmable Real-Time Unit - Industrial Communication Subsystem (PRU-ICSS) is present on various TI SoCs such as AM335x or AM437x or the Keystone 66AK2G. Each SoC can have one or more PRUSS instances that may or may not be identical. For example, AM335x SoCs have a single PRUSS, while AM437x has two PRUSS instances PRUSS1 and PRUSS0, with the PRUSS0 being a cut-down version of the PRUSS1. The PRUSS consists of dual 32-bit RISC cores called the Programmable Real-Time Units (PRUs), some shared, data and instruction memories, some internal peripheral modules, and an interrupt controller. The programmable nature of the PRUs provide flexibility to implement custom peripheral interfaces, fast real-time responses, or specialized data handling. The PRU-ICSS functionality is achieved through three different platform drivers addressing a specific portion of the PRUSS. Some sub-modules of the PRU-ICSS IP reuse some of the existing drivers (like davinci mdio driver or the generic syscon driver). This design provides flexibility in representing the different modules of PRUSS accordingly, and at the same time allowing the PRUSS driver to add some instance specific configuration within an SoC. The PRUSS platform driver deals with the overall PRUSS and is used for managing the subsystem level resources like various memories and the CFG module. It is responsible for the creation and deletion of the platform devices for the child PRU devices and other child devices (like Interrupt Controller, MDIO node and some syscon nodes) so that they can be managed by specific platform drivers. The PRUSS interrupt controller is managed by an irqchip driver, while the individual PRU RISC cores are managed by a PRU remoteproc driver. The driver currently supports the AM335x SoC, and support for other TI SoCs will be added in subsequent patches. Signed-off-by:
-
Grzegorz Jaszczyk authored
This patch adds the bindings for the Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS) present on various TI SoCs. The IP is present on multiple TI SoC architecture families including the OMAP architecture SoCs such as AM33xx, AM437x and AM57xx; and on a Keystone 2 architecture based 66AK2G SoC. It is also present on the Davinci based OMAPL138 SoCs and K3 architecture based AM65x and J721E SoCs as well. The IP has a number of sub-modules some of which are represented as their own devices. This binding covers only the top-level sub-system devices, and some sub-modules like MDIO, MII_RT (Ethernet MII_RT module with MII ports) and IEP (Industrial Ethernet Peripheral). The remaining sub-modules bindings shall be defined in the respective driver subsystem bindings folders. Couple of full examples have also been added demonstrating the devices on AM335x and AM437x SoCs. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Grygorii Strashko authored
Remove "ti,dma-ring-reset-quirk" DT property as proper w/a handling is implemented now in Ringacc driver using SoC info. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Grygorii Strashko authored
The AM65x SR2.0 Ringacc has fixed errata i2023 "RINGACC, UDMA: RINGACC and UDMA Ring State Interoperability Issue after Channel Teardown". This errata also fixed for J271E SoC. Use SOC bus data for K3 SoC identification and enable i2023 errate w/a only for the AM65x SR1.0. This also makes obsolete "ti,dma-ring-reset-quirk" DT property. Signed-off-by:
-
- 16 Aug, 2020 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lookup of links holding inflight files io_uring: fail poll arm on queue proc failure io_uring: hold 'ctx' reference around task_work queue + execute fs: RWF_NOWAIT should imply IOCB_NOIO io_uring: defer file table grabbing request cleanup for locked requests io_uring: add missing REQ_F_COMP_LOCKED for nested requests io_uring: fix recursive completion locking on oveflow flush io_uring: use TWA_SIGNAL for task_work uncondtionally io_uring: account locked memory before potential error case io_uring: set ctx sq/cq entry count earlier io_uring: Fix NULL pointer dereference in loop_rw_iter() io_uring: add comments on how the async buffered read retry works io_uring: io_async_buf_func() need not test page bit
-
Mike Rapoport authored
Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") converted parisc to use generic version of pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for PMD. Restore the original version of pmd_alloc_one() for parisc, just use GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and memset. Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Tested-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.eeSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create -
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: "I collected a single fix during the merge window: we managed to break the early trap setup on !MMU, this fixes it" * tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Setup exception vector for nommu platform
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
-
- 15 Aug, 2020 21 commits
-
-
Jens Axboe authored
One case was missed in the short IO retry handling, and that's hitting -EAGAIN on a blocking attempt read (eg from io-wq context). This is a problem on sockets that are marked as non-blocking when created, they don't carry any REQ_F_NOWAIT information to help us terminate them instead of perpetually retrying. Fixes: 227c0c96 ("io_uring: internally retry short reads") Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
There's a bit of confusion on the matching pairs of poll vs double poll, depending on if the request is a pure poll (IORING_OP_POLL_ADD) or poll driven retry. Add io_poll_get_double() that returns the double poll waitqueue, if any, and io_poll_get_single() that returns the original poll waitqueue. With that, remove the argument to io_poll_remove_double(). Finally ensure that wait->private is cleared once the double poll handler has run, so that remove knows it's already been seen. Cc: stable@vger.kernel.org # v5.8 Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com Fixes: 18bceab1 ("io_uring: allow POLL_ADD with double poll_wait() users") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull more perf tools updates from Arnaldo Carvalho de Melo: "Fixes: - Fixes for 'perf bench numa'. - Always memset source before memcpy in 'perf bench mem'. - Quote CC and CXX for their arguments to fix build in environments using those variables to pass more than just the compiler names. - Fix module symbol processing, addressing regression detected via "perf test". - Allow multiple probes in record+script_probe_vfs_getname.sh 'perf test' entry. Improvements: - Add script to autogenerate socket family name id->string table from copy of kernel header, used so far in 'perf trace'. - 'perf ftrace' improvements to provide similar options for this utility so that one can go from 'perf record', 'perf trace', etc to 'perf ftrace' just by changing the name of the subcommand. - Prefer new "sched:sched_waking" trace event when it exists in 'perf sched' post processing. - Update POWER9 metrics to utilize other metrics. - Fall back to querying debuginfod if debuginfo not found locally. Miscellaneous: - Sync various kvm headers with kernel sources" * tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits) perf ftrace: Make option description initials all capital letters perf build-ids: Fall back to debuginfod query if debuginfo not found perf bench numa: Remove dead code in parse_nodes_opt() perf stat: Update POWER9 metrics to utilize other metrics perf ftrace: Add change log perf: ftrace: Add set_tracing_options() to set all trace options perf ftrace: Add option --tid to filter by thread id perf ftrace: Add option -D/--delay to delay tracing perf: ftrace: Allow set graph depth by '--graph-opts' perf ftrace: Add support for trace option tracing_thresh perf ftrace: Add option 'verbose' to show more info for graph tracer perf ftrace: Add support for tracing option 'irq-info' perf ftrace: Add support for trace option funcgraph-irqs perf ftrace: Add support for trace option sleep-time perf ftrace: Add support for tracing option 'func_stack_trace' perf tools: Add general function to parse sublevel options perf ftrace: Add option '--inherit' to trace children processes perf ftrace: Show trace column header perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size perf ftrace: Factor out function write_tracing_file_int() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes and small updates all around the place: - Fix mitigation state sysfs output - Fix an FPU xstate/sxave code assumption bug triggered by Architectural LBR support - Fix Lightning Mountain SoC TSC frequency enumeration bug - Fix kexec debug output - Fix kexec memory range assumption bug - Fix a boundary condition in the crash kernel code - Optimize porgatory.ro generation a bit - Enable ACRN guests to use X2APIC mode - Reduce a __text_poke() IRQs-off critical section for the benefit of PREEMPT_RT" * tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Acquire pte lock with interrupts enabled x86/bugs/multihit: Fix mitigation reporting when VMX is not in use x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs x86/purgatory: Don't generate debug info for purgatory.ro x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC kexec_file: Correctly output debugging information for the PT_LOAD ELF header kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges x86/crash: Correct the address boundary of function parameters x86/acrn: Remove redundant chars from ACRN signature x86/acrn: Allow ACRN guest to use X2APIC mode -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: fix a new tracepoint's output value, and fix the formatting of show-state syslog printouts" * tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix the alignment of the show-state debug output sched: Fix use of count for nr_running tracepoint
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc fixes, an expansion of perf syscall access to CAP_PERFMON privileged tools, plus a RAPL HW-enablement for Intel SPR platforms" * tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Add support for Intel SPR platform perf/x86/rapl: Support multiple RAPL unit quirks perf/x86/rapl: Fix missing psys sysfs attributes hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration kprobes: Remove show_registers() function prototype perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixlets from Ingo Molnar: "A documentation fix and a 'fallthrough' macro update" * tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Convert to use the preferred 'fallthrough' macro Documentation/locking/locktypes: Fix a typo
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: - some code cleanup - a couple of static analysis fixes - setattr: try to pick a fid associated with the file rather than the dentry, which might sometimes matter * tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux: 9p: Remove unneeded cast from memory allocation 9p: remove unused code in 9p net/9p: Fix sparse endian warning in trans_fd.c 9p: Fix memory leak in v9fs_mount 9p: retrieve fid from file when file instance exist.
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three small cifs/smb3 fixes, one for stable fixing mkdir path with the 'idsfromsid' mount option" * tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: SMB3: Fix mkdir when idsfromsid configured on mount cifs: Convert to use the fallthrough macro cifs: Fix an error pointer dereference in cifs_mount()
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client updates from Trond Myklebust: "Stable fixes: - pNFS: Don't return layout segments that are being used for I/O - pNFS: Don't move layout segments off the active list when being used for I/O Features: - NFS: Add support for user xattrs through the NFSv4.2 protocol - NFS: Allow applications to speed up readdir+statx() using AT_STATX_DONT_SYNC - NFSv4.0 allow nconnect for v4.0 Bugfixes and cleanups: - nfs: ensure correct writeback errors are returned on close() - nfs: nfs_file_write() should check for writeback errors - nfs: Fix getxattr kernel panic and memory overflow - NFS: Fix the pNFS/flexfiles mirrored read failover code - SUNRPC: dont update timeout value on connection reset - freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS - sunrpc: destroy rpc_inode_cachep after unregister_filesystem" * tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (32 commits) NFS: Fix flexfiles read failover fs: nfs: delete repeated words in comments rpc_pipefs: convert comma to semicolon nfs: Fix getxattr kernel panic and memory overflow NFS: Don't return layout segments that are in use NFS: Don't move layouts to plh_return_segs list while in use NFS: Add layout segment info to pnfs read/write/commit tracepoints NFS: Add tracepoints for layouterror and layoutstats. NFS: Report the stateid + status in trace_nfs4_layoutreturn_on_close() SUNRPC dont update timeout value on connection reset nfs: nfs_file_write() should check for writeback errors nfs: ensure correct writeback errors are returned on close() NFSv4.2: xattr cache: get rid of cache discard work queue NFS: remove redundant initialization of variable result NFSv4.0 allow nconnect for v4.0 freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS sunrpc: destroy rpc_inode_cachep after unregister_filesystem NFSv4.2: add client side xattr caching. NFSv4.2: hook in the user extended attribute handlers NFSv4.2: add the extended attribute proc functions. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull edac fix from Tony Luck: "Fix for the ie31200 driver that missed the first pull" * tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/ie31200: Fallback if host bridge device is already initialized
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: "Another round of 'allOf' removals and whitespace clean-ups of schemas" * tag 'devicetree-fixes-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Remove more cases of 'allOf' containing a '$ref' dt-bindings: Whitespace clean-ups in schema files
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more ACPI updates from Rafael Wysocki: "Add new hardware support to the ACPI driver for AMD SoCs, the x86 clk driver and the Designware i2c driver (changes from Akshu Agrawal and Pu Wen)" * tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: clk: x86: Support RV architecture ACPI: APD: Add a fmw property is_raven clk: x86: Change name from ST to FCH ACPI: APD: Change name from ST to FCH i2c: designware: Add device HID for Hygon I2C controller
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull one more power management update from Rafael Wysocki: "Modify the intel_pstate driver to allow it to work in the passive mode with hardware-managed P-states (HWP) enabled" * tag 'pm-5.9-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Implement passive mode with HWP enabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD updates from Lee Jones: "Core Frameworks - Make better attempt at matching device with the correct OF node - Allow batch removal of hierarchical sub-devices New Drivers - Add STM32 Clocksource driver - Add support for Khadas System Control Microcontroller Driver Removal - Remove unused driver for TI's SMSC ECE1099 New Device Support - Add support for Intel Emmitsburg PCH to Intel LPSS PCI - Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI - Add support for Dialog DA revision to Dialog DA9063 New Functionality - Add support for AXP803 to be probed by I2C Fix-ups - Numerous W=1 warning fixes - Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller) - Enabled Regmap 'fast I/O' in stm32-lptimer - Change BUG_ON to WARN_ON in arizona-core - Remove superfluous code/initialisation (madera, max14577) - Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private) - Switch to of_platform_populate() in sprd-sc27xx-spi - Expand out set/get brightness/pwm macros in lm3533-ctrlbank - Disable IRQs on suspend in motorola-cpcap - Clean-up error handling in intel_soc_pmic_mrfld - Ensure correct removal order of sub-devices in madera - Many s/HTTP/HTTPS/ link changes - Ensure name used with Regmap is unique in syscon Bug Fixes - Properly 'put' clock on unbind and error in arizona-core - Fix revision handling in da9063 - Fix 'assignment of read-only location' error in kempld-core - Avoid using the Regmap API when atomic in rn5t618 - Redefine volatile register description in rn5t618 - Use locking to protect event handler in dln2" * tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits) mfd: syscon: Use a unique name with regmap_config mfd: Replace HTTP links with HTTPS ones mfd: dln2: Run event handler loop under spinlock mfd: madera: Improve handling of regulator unbinding mfd: mfd-core: Add mechanism for removal of a subset of children mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8() mfd: max14577: Remove redundant initialization of variable current_bits mfd: rn5t618: Fix caching of battery related registers mfd: max77693-private: Drop a duplicated word mfd: da9055: pdata.h: Drop a duplicated word mfd: rn5t618: Make restart handler atomic safe mfd: kempld-core: Fix 'assignment of read-only location' error mfd: axp20x: Allow the AXP803 to be probed by I2C mfd: da9063: Add support for latest DA silicon revision mfd: da9063: Fix revision handling to correctly select reg tables dt-bindings: mfd: st,stmfx: Remove I2C unit name dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller mfd: motorola-cpcap: Disable interrupt for suspend mfd: smsc-ece1099: Remove driver mfd: core: Add OF_MFD_CELL_REG() helper ...
-
Linus Torvalds authored
Merge more updates from Andrew Morton: "Subsystems affected by this patch series: mm/hotfixes, lz4, exec, mailmap, mm/thp, autofs, sysctl, mm/kmemleak, mm/misc and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits) virtio: pci: constify ioreadX() iomem argument (as in generic implementation) ntb: intel: constify ioreadX() iomem argument (as in generic implementation) rtl818x: constify ioreadX() iomem argument (as in generic implementation) iomap: constify ioreadX() iomem argument (as in generic implementation) sh: use generic strncpy() sh: clkfwk: remove r8/r16/r32 include/asm-generic/vmlinux.lds.h: align ro_after_init mm: annotate a data race in page_zonenum() mm/swap.c: annotate data races for lru_rotate_pvecs mm/rmap: annotate a data race at tlb_flush_batched mm/mempool: fix a data race in mempool_free() mm/list_lru: fix a data race in list_lru_count_one mm/memcontrol: fix a data race in scan count mm/page_counter: fix various data races at memsw mm/swapfile: fix and annotate various data races mm/filemap.c: fix a data race in filemap_fault() mm/swap_state: mark various intentional data races mm/page_io: mark various intentional data races mm/frontswap: mark various intentional data races mm/kmemleak: silence KCSAN splats in checksum ...
-
Krzysztof Kozlowski authored
The ioreadX() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Cc: Allen Hubbe <allenbh@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jakub Kicinski <kuba@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200709072837.5869-5-krzk@kernel.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The ioreadX() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <allenbh@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jakub Kicinski <kuba@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200709072837.5869-4-krzk@kernel.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The ioreadX() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Cc: Allen Hubbe <allenbh@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jakub Kicinski <kuba@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200709072837.5869-3-krzk@kernel.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Patch series "iomap: Constify ioreadX() iomem argument", v3. The ioread8/16/32() and others have inconsistent interface among the architectures: some taking address as const, some not. It seems there is nothing really stopping all of them to take pointer to const. This patch (of 4): The ioreadX() and ioreadX_rep() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. [krzk@kernel.org: sh: clk: fix assignment from incompatible pointer type for ioreadX()] Link: http://lkml.kernel.org/r/20200723082017.24053-1-krzk@kernel.org [akpm@linux-foundation.org: fix drivers/mailbox/bcm-pdc-mailbox.c] Link: http://lkml.kernel.org/r/202007132209.Rxmv4QyS%25lkp@intel.comSuggested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Allen Hubbe <allenbh@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Link: http://lkml.kernel.org/r/20200709072837.5869-1-krzk@kernel.org Link: http://lkml.kernel.org/r/20200709072837.5869-2-krzk@kernel.orgSigned-off-by:
-
Kuninori Morimoto authored
Current SH will get below warning at strncpy() In file included from ${LINUX}/arch/sh/include/asm/string.h:3, from ${LINUX}/include/linux/string.h:20, from ${LINUX}/include/linux/bitmap.h:9, from ${LINUX}/include/linux/nodemask.h:95, from ${LINUX}/include/linux/mmzone.h:17, from ${LINUX}/include/linux/gfp.h:6, from ${LINUX}/innclude/linux/slab.h:15, from ${LINUX}/linux/drivers/mmc/host/vub300.c:38: ${LINUX}/drivers/mmc/host/vub300.c: In function 'new_system_port_status': ${LINUX}/arch/sh/include/asm/string_32.h:51:42: warning: array subscript\ 80 is above array bounds of 'char[26]' [-Warray-bounds] : "0" (__dest), "1" (__src), "r" (__src+__n) ~~~~~^~~~ In general, strncpy() should behave like below. char dest[10]; char *src = "12345"; strncpy(dest, src, 10); // dest = {'1', '2', '3', '4', '5', '\0','\0','\0','\0','\0'} But, current SH strnpy() has 2 issues. 1st is it will access to out-of-memory (= src + 10). 2nd is it needs big fixup for it, and maintenance __asm__ code is difficult. To solve these issues, this patch simply uses generic strncpy() instead of architecture specific one. Signed-off-by:Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
