- 19 Jun, 2020 6 commits
-
-
Taehee Yoo authored
In the datapath, the ip_tunnel_lookup() is used and it internally uses fallback tunnel device pointer, which is fb_tunnel_dev. This pointer variable should be set to NULL when a fb interface is deleted. But there is no routine to set fb_tunnel_dev pointer to NULL. So, this pointer will be still used after interface is deleted and it eventually results in the use-after-free problem. Test commands: ip netns add A ip netns add B ip link add eth0 type veth peer name eth1 ip link set eth0 netns A ip link set eth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set eth0 up ip netns exec A ip link add gre1 type gre local 10.0.0.1 \ remote 10.0.0.2 ip netns exec A ip link set gre1 up ip netns exec A ip a a 10.0.100.1/24 dev gre1 ip netns exec A ip a a 10.0.0.1/24 dev eth0 ip netns exec B ip link set lo up ip netns exec B ip link set eth1 up ip netns exec B ip link add gre1 type gre local 10.0.0.2 \ remote 10.0.0.1 ip netns exec B ip link set gre1 up ip netns exec B ip a a 10.0.100.2/24 dev gre1 ip netns exec B ip a a 10.0.0.2/24 dev eth1 ip netns exec A hping3 10.0.100.2 -2 --flood -d 60000 & ip netns del B Splat looks like: [ 77.793450][ C3] ================================================================== [ 77.794702][ C3] BUG: KASAN: use-after-free in ip_tunnel_lookup+0xcc4/0xf30 [ 77.795573][ C3] Read of size 4 at addr ffff888060bd9c84 by task hping3/2905 [ 77.796398][ C3] [ 77.796664][ C3] CPU: 3 PID: 2905 Comm: hping3 Not tainted 5.8.0-rc1+ #616 [ 77.797474][ C3] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 77.798453][ C3] Call Trace: [ 77.798815][ C3] <IRQ> [ 77.799142][ C3] dump_stack+0x9d/0xdb [ 77.799605][ C3] print_address_description.constprop.7+0x2cc/0x450 [ 77.800365][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.800908][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.801517][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.802145][ C3] kasan_report+0x154/0x190 [ 77.802821][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.803503][ C3] ip_tunnel_lookup+0xcc4/0xf30 [ 77.804165][ C3] __ipgre_rcv+0x1ab/0xaa0 [ip_gre] [ 77.804862][ C3] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 77.805621][ C3] gre_rcv+0x304/0x1910 [ip_gre] [ 77.806293][ C3] ? lock_acquire+0x1a9/0x870 [ 77.806925][ C3] ? gre_rcv+0xfe/0x354 [gre] [ 77.807559][ C3] ? erspan_xmit+0x2e60/0x2e60 [ip_gre] [ 77.808305][ C3] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 77.809032][ C3] ? rcu_read_lock_held+0x90/0xa0 [ 77.809713][ C3] gre_rcv+0x1b8/0x354 [gre] [ ... ] Suggested-by:Eric Dumazet <eric.dumazet@gmail.com> Fixes: c5441932 ("GRE: Refactor GRE tunneling code.") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Taehee Yoo authored
In the datapath, the ip6gre_tunnel_lookup() is used and it internally uses fallback tunnel device pointer, which is fb_tunnel_dev. This pointer variable should be set to NULL when a fb interface is deleted. But there is no routine to set fb_tunnel_dev pointer to NULL. So, this pointer will be still used after interface is deleted and it eventually results in the use-after-free problem. Test commands: ip netns add A ip netns add B ip link add eth0 type veth peer name eth1 ip link set eth0 netns A ip link set eth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set eth0 up ip netns exec A ip link add ip6gre1 type ip6gre local fc:0::1 \ remote fc:0::2 ip netns exec A ip -6 a a fc:100::1/64 dev ip6gre1 ip netns exec A ip link set ip6gre1 up ip netns exec A ip -6 a a fc:0::1/64 dev eth0 ip netns exec A ip link set ip6gre0 up ip netns exec B ip link set lo up ip netns exec B ip link set eth1 up ip netns exec B ip link add ip6gre1 type ip6gre local fc:0::2 \ remote fc:0::1 ip netns exec B ip -6 a a fc:100::2/64 dev ip6gre1 ip netns exec B ip link set ip6gre1 up ip netns exec B ip -6 a a fc:0::2/64 dev eth1 ip netns exec B ip link set ip6gre0 up ip netns exec A ping fc:100::2 -s 60000 & ip netns del B Splat looks like: [ 73.087285][ C1] BUG: KASAN: use-after-free in ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.088361][ C1] Read of size 4 at addr ffff888040559218 by task ping/1429 [ 73.089317][ C1] [ 73.089638][ C1] CPU: 1 PID: 1429 Comm: ping Not tainted 5.7.0+ #602 [ 73.090531][ C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 73.091725][ C1] Call Trace: [ 73.092160][ C1] <IRQ> [ 73.092556][ C1] dump_stack+0x96/0xdb [ 73.093122][ C1] print_address_description.constprop.6+0x2cc/0x450 [ 73.094016][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.094894][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.095767][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.096619][ C1] kasan_report+0x154/0x190 [ 73.097209][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.097989][ C1] ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.098750][ C1] ? gre_del_protocol+0x60/0x60 [gre] [ 73.099500][ C1] gre_rcv+0x1c5/0x1450 [ip6_gre] [ 73.100199][ C1] ? ip6gre_header+0xf00/0xf00 [ip6_gre] [ 73.100985][ C1] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 73.101830][ C1] ? ip6_input_finish+0x5/0xf0 [ 73.102483][ C1] ip6_protocol_deliver_rcu+0xcbb/0x1510 [ 73.103296][ C1] ip6_input_finish+0x5b/0xf0 [ 73.103920][ C1] ip6_input+0xcd/0x2c0 [ 73.104473][ C1] ? ip6_input_finish+0xf0/0xf0 [ 73.105115][ C1] ? rcu_read_lock_held+0x90/0xa0 [ 73.105783][ C1] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 73.106548][ C1] ipv6_rcv+0x1f1/0x300 [ ... ] Suggested-by: -
Taehee Yoo authored
In the current code, ->ndo_start_xmit() can be executed recursively only 10 times because of stack memory. But, in the case of the vxlan, 10 recursion limit value results in a stack overflow. In the current code, the nested interface is limited by 8 depth. There is no critical reason that the recursion limitation value should be 10. So, it would be good to be the same value with the limitation value of nesting interface depth. Test commands: ip link add vxlan10 type vxlan vni 10 dstport 4789 srcport 4789 4789 ip link set vxlan10 up ip a a 192.168.10.1/24 dev vxlan10 ip n a 192.168.10.2 dev vxlan10 lladdr fc:22:33:44:55:66 nud permanent for i in {9..0} do let A=$i+1 ip link add vxlan$i type vxlan vni $i dstport 4789 srcport 4789 4789 ip link set vxlan$i up ip a a 192.168.$i.1/24 dev vxlan$i ip n a 192.168.$i.2 dev vxlan$i lladdr fc:22:33:44:55:66 nud permanent bridge fdb add fc:22:33:44:55:66 dev vxlan$A dst 192.168.$i.2 self done hping3 192.168.10.2 -2 -d 60000 Splat looks like: [ 103.814237][ T1127] ============================================================================= [ 103.871955][ T1127] BUG kmalloc-2k (Tainted: G B ): Padding overwritten. 0x00000000897a2e4f-0x000 [ 103.873187][ T1127] ----------------------------------------------------------------------------- [ 103.873187][ T1127] [ 103.874252][ T1127] INFO: Slab 0x000000005cccc724 objects=5 used=5 fp=0x0000000000000000 flags=0x10000000001020 [ 103.881323][ T1127] CPU: 3 PID: 1127 Comm: hping3 Tainted: G B 5.7.0+ #575 [ 103.882131][ T1127] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 103.883006][ T1127] Call Trace: [ 103.883324][ T1127] dump_stack+0x96/0xdb [ 103.883716][ T1127] slab_err+0xad/0xd0 [ 103.884106][ T1127] ? _raw_spin_unlock+0x1f/0x30 [ 103.884620][ T1127] ? get_partial_node.isra.78+0x140/0x360 [ 103.885214][ T1127] slab_pad_check.part.53+0xf7/0x160 [ 103.885769][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.886316][ T1127] check_slab+0x97/0xb0 [ 103.886763][ T1127] alloc_debug_processing+0x84/0x1a0 [ 103.887308][ T1127] ___slab_alloc+0x5a5/0x630 [ 103.887765][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.888265][ T1127] ? lock_downgrade+0x730/0x730 [ 103.888762][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.889244][ T1127] ? __slab_alloc+0x3e/0x80 [ 103.889675][ T1127] __slab_alloc+0x3e/0x80 [ 103.890108][ T1127] __kmalloc_node_track_caller+0xc7/0x420 [ ... ] Fixes: 11a766ce ("net: Increase xmit RECURSION_LIMIT to 10.") Signed-off-by: -
Yang Yingliang authored
I got a memleak report when doing some fuzz test: unreferenced object 0xffff888112584000 (size 13599): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 32 bytes): 74 61 70 30 00 00 00 00 00 00 00 00 00 00 00 00 tap0............ 00 ee d9 19 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<000000002f60ba65>] __kmalloc_node+0x309/0x3a0 [<0000000075b211ec>] kvmalloc_node+0x7f/0xc0 [<00000000d3a97396>] alloc_netdev_mqs+0x76/0xfc0 [<00000000609c3655>] __tun_chr_ioctl+0x1456/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff888111845cc0 (size 8): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 8 bytes): 74 61 70 30 00 88 ff ff tap0.... backtrace: [<000000004c159777>] kstrdup+0x35/0x70 [<00000000d8b496ad>] kstrdup_const+0x3d/0x50 [<00000000494e884a>] kvasprintf_const+0xf1/0x180 [<0000000097880a2b>] kobject_set_name_vargs+0x56/0x140 [<000000008fbdfc7b>] dev_set_name+0xab/0xe0 [<000000005b99e3b4>] netdev_register_kobject+0xc0/0x390 [<00000000602704fe>] register_netdevice+0xb61/0x1250 [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff88811886d800 (size 512): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff c0 66 3d a3 ff ff ff ff .........f=..... backtrace: [<0000000050315800>] device_add+0x61e/0x1950 [<0000000021008dfb>] netdev_register_kobject+0x17e/0x390 [<00000000602704fe>] register_netdevice+0xb61/0x1250 [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 If call_netdevice_notifiers() failed, then rollback_registered() calls netdev_unregister_kobject() which holds the kobject. The reference cannot be put because the netdev won't be add to todo list, so it will leads a memleak, we need put the reference to avoid memleak. Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Sascha Hauer authored
The older SoCs like Armada XP support a 2500BaseX mode in the datasheets referred to as DR-SGMII (Double rated SGMII) or HS-SGMII (High Speed SGMII). This is an upclocked 1000BaseX mode, thus PHY_INTERFACE_MODE_2500BASEX is the appropriate mode define for it. adding support for it merely means writing the correct magic value into the MVNETA_SERDES_CFG register. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Sascha Hauer authored
The MVNETA_SERDES_CFG register is only available on older SoCs like the Armada XP. On newer SoCs like the Armada 38x the fields are moved to comphy. This patch moves the writes to this register next to the comphy initialization, so that depending on the SoC either comphy or MVNETA_SERDES_CFG is configured. With this we no longer write to the MVNETA_SERDES_CFG on SoCs where it doesn't exist. Suggested-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
- 17 Jun, 2020 16 commits
-
-
Shannon Nelson authored
Set up vlan_features for use by any vlans above us. Fixes: beead698 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Acked-by:
Jonathan Toppins <jtoppins@redhat.com> Signed-off-by:
-
Shannon Nelson authored
If the driver is busy resetting queues after a change in MTU or queue parameters, don't bother checking the link, wait until the next watchdog cycle. Fixes: 987c0871 ("ionic: check for linkup in watchdog") Signed-off-by:
-
Jeremy Kerr authored
Using a AX88179 device (0b95:1790), I see two bytes of appended data on every RX packet. For example, this 48-byte ping, using 0xff as a payload byte: 04:20:22.528472 IP 192.168.1.1 > 192.168.1.2: ICMP echo request, id 2447, seq 1, length 64 0x0000: 000a cd35 ea50 000a cd35 ea4f 0800 4500 0x0010: 0054 c116 4000 4001 f63e c0a8 0101 c0a8 0x0020: 0102 0800 b633 098f 0001 87ea cd5e 0000 0x0030: 0000 dcf2 0600 0000 0000 ffff ffff ffff 0x0040: ffff ffff ffff ffff ffff ffff ffff ffff 0x0050: ffff ffff ffff ffff ffff ffff ffff ffff 0x0060: ffff 961f Those last two bytes - 96 1f - aren't part of the original packet. In the ax88179 RX path, the usbnet rx_fixup function trims a 2-byte 'alignment pseudo header' from the start of the packet, and sets the length from a per-packet field populated by hardware. It looks like that length field *includes* the 2-byte header; the current driver assumes that it's excluded. This change trims the 2-byte alignment header after we've set the packet length, so the resulting packet length is correct. While we're moving the comment around, this also fixes the spelling of 'pseudo'. Signed-off-by:
Jeremy Kerr <jk@ozlabs.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2020-06-17 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 2 day(s) which contain a total of 14 files changed, 158 insertions(+), 59 deletions(-). The main changes are: 1) Important fix for bpf_probe_read_kernel_str() return value, from Andrii. 2) [gs]etsockopt fix for large optlen, from Stanislav. 3) devmap allocation fix, from Toke. ==================== Signed-off-by: -
Stanislav Fomichev authored
Extend existing doc with more details about requiring ctx->optlen = 0 for handling optval > PAGE_SIZE. Signed-off-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200617010416.93086-3-sdf@google.com
-
Stanislav Fomichev authored
We are relying on the fact, that we can pass > sizeof(int) optvals to the SOL_IP+IP_FREEBIND option (the kernel will take first 4 bytes). In the BPF program we check that we can only touch PAGE_SIZE bytes, but the real optlen is PAGE_SIZE * 2. In both cases, we override it to some predefined value and trim the optlen. Also, let's modify exiting IP_TOS usecase to test optlen=0 case where BPF program just bypasses the data as is. Signed-off-by:
-
Stanislav Fomichev authored
Attaching to these hooks can break iptables because its optval is usually quite big, or at least bigger than the current PAGE_SIZE limit. David also mentioned some SCTP options can be big (around 256k). For such optvals we expose only the first PAGE_SIZE bytes to the BPF program. BPF program has two options: 1. Set ctx->optlen to 0 to indicate that the BPF's optval should be ignored and the kernel should use original userspace value. 2. Set ctx->optlen to something that's smaller than the PAGE_SIZE. v5: * use ctx->optlen == 0 with trimmed buffer (Alexei Starovoitov) * update the docs accordingly v4: * use temporary buffer to avoid optval == optval_end == NULL; this removes the corner case in the verifier that might assume non-zero PTR_TO_PACKET/PTR_TO_PACKET_END. v3: * don't increase the limit, bypass the argument v2: * proper comments formatting (Jakub Kicinski) Fixes: 0d01da6a ("bpf: implement getsockopt and setsockopt hooks") Signed-off-by:
-
Toke Høiland-Jørgensen authored
Syzkaller discovered that creating a hash of type devmap_hash with a large number of entries can hit the memory allocator limit for allocating contiguous memory regions. There's really no reason to use kmalloc_array() directly in the devmap code, so just switch it to the existing bpf_map_area_alloc() function that is used elsewhere. Fixes: 6f9d451a ("xdp: Add devmap_hash map type for looking up devices by hashed index") Reported-by:
Xiumei Mu <xmu@redhat.com> Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200616142829.114173-1-toke@redhat.com
-
Hangbin Liu authored
In commit 34cc0b33 we only handled the frame_sz in convert_to_xdp_frame(). This patch will also handle frame_sz in xdp_convert_zc_to_xdp_frame(). Fixes: 34cc0b33 ("xdp: Xdp_frame add member frame_sz and handle in convert_to_xdp_frame") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
-
Tobias Klauser authored
Commit c34a06c5 ("tools/bpftool: Add ringbuf map to a list of known map types") added the symbolic "ringbuf" name. Document it in the bpftool map command docs and usage as well. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Andrii Nakryiko <andriin@fb.com> Acked-by:
-
Andrii Nakryiko authored
During recent refactorings, bpf_probe_read_kernel_str() started returning 0 on success, instead of amount of data successfully read. This majorly breaks applications relying on bpf_probe_read_kernel_str() and bpf_probe_read_str() and their results. Fix this by returning actual number of bytes read. Fixes: 8d92db5c ("bpf: rework the compat kernel probe handling") Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't get per-cpu pointer with preemption enabled in nft_set_pipapo, fix from Stefano Brivio. 2) Fix memory leak in ctnetlink, from Pablo Neira Ayuso. 3) Multiple definitions of MPTCP_PM_MAX_ADDR, from Geliang Tang. 4) Accidently disabling NAPI in non-error paths of macb_open(), from Charles Keepax. 5) Fix races between alx_stop and alx_remove, from Zekun Shen. 6) We forget to re-enable SRIOV during resume in bnxt_en driver, from Michael Chan. 7) Fix memory leak in ipv6_mc_destroy_dev(), from Wang Hai. 8) rxtx stats use wrong index in mvpp2 driver, from Sven Auhagen. 9) Fix memory leak in mptcp_subflow_create_socket error path, from Wei Yongjun. 10) We should not adjust the TCP window advertised when sending dup acks in non-SACK mode, because it won't be counted as a dup by the sender if the window size changes. From Eric Dumazet. 11) Destroy the right number of queues during remove in mvpp2 driver, from Sven Auhagen. 12) Various WOL and PM fixes to e1000 driver, from Chen Yu, Vaibhav Gupta, and Arnd Bergmann. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits) e1000e: fix unused-function warning e1000: use generic power management e1000e: Do not wake up the system via WOL if device wakeup is disabled lan743x: add MODULE_DEVICE_TABLE for module loading alias mlxsw: spectrum: Adjust headroom buffers for 8x ports bareudp: Fixed configuration to avoid having garbage values mvpp2: remove module bugfix tcp: grow window for OOO packets only for SACK flows mptcp: fix memory leak in mptcp_subflow_create_socket() netfilter: flowtable: Make nf_flow_table_offload_add/del_cb inline net/sched: act_ct: Make tcf_ct_flow_table_restore_skb inline net: dsa: sja1105: fix PTP timestamping with large tc-taprio cycles mvpp2: ethtool rxtx stats fix MAINTAINERS: switch to my private email for Renesas Ethernet drivers rocker: fix incorrect error handling in dma_rings_init test_objagg: Fix potential memory leak in error handling net: ethernet: mtk-star-emac: simplify interrupt handling mld: fix memory leak in ipv6_mc_destroy_dev() bnxt_en: Return from timer if interface is not in open state. bnxt_en: Fix AER reset logic on 57500 chips. ... -
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsLinus Torvalds authored
Pull AFS fixes from David Howells: "I've managed to get xfstests kind of working with afs. Here are a set of patches that fix most of the bugs found. There are a number of primary issues: - Incorrect handling of mtime and non-handling of ctime. It might be argued, that the latter isn't a bug since the AFS protocol doesn't support ctime, but I should probably still update it locally. - Shared-write mmap, truncate and writeback bugs. This includes not changing i_size under the callback lock, overwriting local i_size with the reply from the server after a partial writeback, not limiting the writeback from an mmapped page to EOF. - Checks for an abort code indicating that the primary vnode in an operation was deleted by a third-party are done in the wrong place. - Silly rename bugs. This includes an incomplete conversion to the new operation handling, duplicate nlink handling, nlink changing not being done inside the callback lock and insufficient handling of third-party conflicting directory changes. And some secondary ones: - The UAEOVERFLOW abort code should map to EOVERFLOW not EREMOTEIO. - Remove a couple of unused or incompletely used bits. - Remove a couple of redundant success checks. These seem to fix all the data-corruption bugs found by ./check -afs -g quick along with the obvious silly rename bugs and time bugs. There are still some test failures, but they seem to fall into two classes: firstly, the authentication/security model is different to the standard UNIX model and permission is arbitrated by the server and cached locally; and secondly, there are a number of features that AFS does not support (such as mknod). But in these cases, the tests themselves need to be adapted or skipped. Using the in-kernel afs client with xfstests also found a bug in the AuriStor AFS server that has been fixed for a future release" * tag 'afs-fixes-20200616' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Fix silly rename afs: afs_vnode_commit_status() doesn't need to check the RPC error afs: Fix use of afs_check_for_remote_deletion() afs: Remove afs_operation::abort_code afs: Fix yfs_fs_fetch_status() to honour vnode selector afs: Remove yfs_fs_fetch_file_status() as it's not used afs: Fix the mapping of the UAEOVERFLOW abort code afs: Fix truncation issues and mmap writeback size afs: Concoct ctimes afs: Fix EOF corruption afs: afs_write_end() should change i_size under the right lock afs: Fix non-setting of mtime when writing into mmap -
Randy Dunlap authored
Remove SH-5 documentation index entries following the removal of SH-5 source code. Error: Cannot open file ../arch/sh/mm/tlb-sh5.c Error: Cannot open file ../arch/sh/mm/tlb-sh5.c Error: Cannot open file ../arch/sh/include/asm/tlb_64.h Error: Cannot open file ../arch/sh/include/asm/tlb_64.h Fixes: 3b69e8b4 ("Merge tag 'sh-for-5.8' of git://git.libc.org/linux-sh") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Cc: Rich Felker <dalias@libc.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: ysato@users.sourceforge.jp Cc: linux-sh@vger.kernel.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'flex-array-conversions-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull flexible-array member conversions from Gustavo A. R. Silva: "Replace zero-length arrays with flexible-array members. Notice that all of these patches have been baking in linux-next for two development cycles now. There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. C99 introduced “flexible array members”, which lacks a numeric size for the array declaration entirely: struct something { size_t count; struct foo items[]; }; This is the way the kernel expects dynamically sized trailing elements to be declared. It allows the compiler to generate errors when the flexible array does not occur last in the structure, which helps to prevent some kind of undefined behavior[3] bugs from being inadvertently introduced to the codebase. It also allows the compiler to correctly analyze array sizes (via sizeof(), CONFIG_FORTIFY_SOURCE, and CONFIG_UBSAN_BOUNDS). For instance, there is no mechanism that warns us that the following application of the sizeof() operator to a zero-length array always results in zero: struct something { size_t count; struct foo items[0]; }; struct something *instance; instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL); instance->count = count; size = sizeof(instance->items) * instance->count; memcpy(instance->items, source, size); At the last line of code above, size turns out to be zero, when one might have thought it represents the total size in bytes of the dynamic memory recently allocated for the trailing array items. Here are a couple examples of this issue[4][5]. Instead, flexible array members have incomplete type, and so the sizeof() operator may not be applied[6], so any misuse of such operators will be immediately noticed at build time. The cleanest and least error-prone way to implement this is through the use of a flexible array member: struct something { size_t count; struct foo items[]; }; struct something *instance; instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL); instance->count = count; size = sizeof(instance->items[0]) * instance->count; memcpy(instance->items, source, size); instead" [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") [4] commit f2cd32a4 ("rndis_wlan: Remove logically dead code") [5] commit ab91c2a8 ("tpm: eventlog: Replace zero-length array with flexible-array member") [6] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html * tag 'flex-array-conversions-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (41 commits) w1: Replace zero-length array with flexible-array tracing/probe: Replace zero-length array with flexible-array soc: ti: Replace zero-length array with flexible-array tifm: Replace zero-length array with flexible-array dmaengine: tegra-apb: Replace zero-length array with flexible-array stm class: Replace zero-length array with flexible-array Squashfs: Replace zero-length array with flexible-array ASoC: SOF: Replace zero-length array with flexible-array ima: Replace zero-length array with flexible-array sctp: Replace zero-length array with flexible-array phy: samsung: Replace zero-length array with flexible-array RxRPC: Replace zero-length array with flexible-array rapidio: Replace zero-length array with flexible-array media: pwc: Replace zero-length array with flexible-array firmware: pcdp: Replace zero-length array with flexible-array oprofile: Replace zero-length array with flexible-array block: Replace zero-length array with flexible-array tools/testing/nvdimm: Replace zero-length array with flexible-array libata: Replace zero-length array with flexible-array kprobes: Replace zero-length array with flexible-array ...
-
Arvind Sankar authored
The purgatory Makefile removes -fstack-protector options if they were configured in, but does not currently add -fno-stack-protector. If gcc was configured with the --enable-default-ssp configure option, this results in the stack protector still being enabled for the purgatory (absent distro-specific specs files that might disable it again for freestanding compilations), if the main kernel is being compiled with stack protection enabled (if it's disabled for the main kernel, the top-level Makefile will add -fno-stack-protector). This will break the build since commit e4160b2e ("x86/purgatory: Fail the build if purgatory.ro has missing symbols") and prior to that would have caused runtime failure when trying to use kexec. Explicitly add -fno-stack-protector to avoid this, as done in other Makefiles that need to disable the stack protector. Reported-by:
Gabriel C <nix.or.die@googlemail.com> Signed-off-by:
Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by:
-
- 16 Jun, 2020 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2020-06-16 This series contains fixes to e1000 and e1000e. Chen fixes an e1000e issue where systems could be waken via WoL, even though the user has disabled the wakeup bit via sysfs. Vaibhav Gupta updates the e1000 driver to clean up the legacy Power Management hooks. Arnd Bergmann cleans up the inconsistent use CONFIG_PM_SLEEP preprocessor tags, which also resolves the compiler warnings about the possibility of unused structure. ==================== Signed-off-by: -
Arnd Bergmann authored
The CONFIG_PM_SLEEP #ifdef checks in this file are inconsistent, leading to a warning about sometimes unused function: drivers/net/ethernet/intel/e1000e/netdev.c:137:13: error: unused function 'e1000e_check_me' [-Werror,-Wunused-function] Rather than adding more #ifdefs, just remove them completely and mark the PM functions as __maybe_unused to let the compiler work it out on it own. Fixes: e086ba2f ("e1000e: disable s0ix entry and exit flows for ME systems") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Vaibhav Gupta authored
With legacy PM hooks, it was the responsibility of a driver to manage PCI states and also the device's power state. The generic approach is to let PCI core handle the work. e1000_suspend() calls __e1000_shutdown() to perform intermediate tasks. __e1000_shutdown() modifies the value of "wake" (device should be wakeup enabled or not), responsible for controlling the flow of legacy PM. Since, PCI core has no idea about the value of "wake", new code for generic PM may produce unexpected results. Thus, use "device_set_wakeup_enable()" to wakeup-enable the device accordingly. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Tested-by:
-
Chen Yu authored
Currently the system will be woken up via WOL(Wake On LAN) even if the device wakeup ability has been disabled via sysfs: cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup disabled The system should not be woken up if the user has explicitly disabled the wake up ability for this device. This patch clears the WOL ability of this network device if the user has disabled the wake up ability in sysfs. Fixes: bc7f75fa ("[E1000E]: New pci-express e1000 driver") Reported-by:
"Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Chen Yu <yu.c.chen@intel.com> Tested-by:
-
Tim Harvey authored
Without a MODULE_DEVICE_TABLE the attributes are missing that create an alias for auto-loading the module in userspace via hotplug. Signed-off-by:
Tim Harvey <tharvey@gateworks.com> Signed-off-by:
-
David Howells authored
Fix AFS's silly rename by the following means: (1) Set the destination directory in afs_do_silly_rename() so as to avoid misbehaviour and indicate that the directory data version will increment by 1 so as to avoid warnings about unexpected changes in the DV. Also indicate that the ctime should be updated to avoid xfstest grumbling. (2) Note when the server indicates that a directory changed more than we expected (AFS_OPERATION_DIR_CONFLICT), indicating a conflict with a third party change, checking on successful completion of unlink and rename. The problem is that the FS.RemoveFile RPC op doesn't report the status of the unlinked file, though YFS.RemoveFile2 does. This can be mitigated by the assumption that if the directory DV cranked by exactly 1, we can be sure we removed one link from the file; further, ordinarily in AFS, files cannot be hardlinked across directories, so if we reduce nlink to 0, the file is deleted. However, if the directory DV jumps by more than 1, we cannot know if a third party intervened by adding or removing a link on the file we just removed a link from. The same also goes for any vnode that is at the destination of the FS.Rename RPC op. (3) Make afs_vnode_commit_status() apply the nlink drop inside the cb_lock section along with the other attribute updates if ->op_unlinked is set on the descriptor for the appropriate vnode. (4) Issue a follow up status fetch to the unlinked file in the event of a third party conflict that makes it impossible for us to know if we actually deleted the file or not. (5) Provide a flag, AFS_VNODE_SILLY_DELETED, to make afs_getattr() lie to the user about the nlink of a silly deleted file so that it appears as 0, not 1. Found with the generic/035 and generic/084 xfstests. Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept") Reported-by:Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com>
-
Ido Schimmel authored
The port's headroom buffers are used to store packets while they traverse the device's pipeline and also to store packets that are egress mirrored. On Spectrum-3, ports with eight lanes use two headroom buffers between which the configured headroom size is split. In order to prevent packet loss, multiply the calculated headroom size by two for 8x ports. Fixes: da382875 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Martin authored
Code to initialize the conf structure while gathering the configuration of the device was missing. Fixes: 571912c6 ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by:
Martin <martin.varghese@nokia.com> Signed-off-by:
-
Sven Auhagen authored
The remove function does not destroy all BM Pools when per cpu pool is active. When reloading the mvpp2 as a module the BM Pools are still active in hardware and due to the bug have twice the size now old + new. This eventually leads to a kernel crash. v2: * add Fixes tag Fixes: 7d04b0b1 ("mvpp2: percpu buffers") Signed-off-by:
Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by:
-
Eric Dumazet authored
Back in 2013, we made a change that broke fast retransmit for non SACK flows. Indeed, for these flows, a sender needs to receive three duplicate ACK before starting fast retransmit. Sending ACK with different receive window do not count. Even if enabling SACK is strongly recommended these days, there still are some cases where it has to be disabled. Not increasing the window seems better than having to rely on RTO. After the fix, following packetdrill test gives : // Initialize connection 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1000,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,wscale 8> +0 < . 1:1(0) ack 1 win 514 +0 accept(3, ..., ...) = 4 +0 < . 1:1001(1000) ack 1 win 514 // Quick ack +0 > . 1:1(0) ack 1001 win 264 +0 < . 2001:3001(1000) ack 1 win 514 // DUPACK : Normally we should not change the window +0 > . 1:1(0) ack 1001 win 264 +0 < . 3001:4001(1000) ack 1 win 514 // DUPACK : Normally we should not change the window +0 > . 1:1(0) ack 1001 win 264 +0 < . 4001:5001(1000) ack 1 win 514 // DUPACK : Normally we should not change the window +0 > . 1:1(0) ack 1001 win 264 +0 < . 1001:2001(1000) ack 1 win 514 // Hole is repaired. +0 > . 1:1(0) ack 5001 win 272 Fixes: 4e4f1fc2 ("tcp: properly increase rcv_ssthresh for ofo packets") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD fix from Lee Jones: "Fix NULL pointer dereference in mt6360 driver" * tag 'mfd-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: mt6360: Fix register driver NULL pointer by adding driver name
-
David Howells authored
afs_vnode_commit_status() is only ever called if op->error is 0, so remove the op->error checks from the function. Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept") Signed-off-by:
-
David Howells authored
afs_check_for_remote_deletion() checks to see if error ENOENT is returned by the server in response to an operation and, if so, marks the primary vnode as having been deleted as the FID is no longer valid. However, it's being called from the operation success functions, where no abort has happened - and if an inline abort is recorded, it's handled by afs_vnode_commit_status(). Fix this by actually calling the operation aborted method if provided and having that point to afs_check_for_remote_deletion(). Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept") Signed-off-by:
-
David Howells authored
Remove afs_operation::abort_code as it's read but never set. Use ac.abort_code instead. Signed-off-by: -
David Howells authored
Fix yfs_fs_fetch_status() to honour the vnode selector in op->fetch_status.which as does afs_fs_fetch_status() that allows afs_do_lookup() to use this as an alternative to the InlineBulkStatus RPC call if not implemented by the server. This doesn't matter in the current code as YFS servers always implement InlineBulkStatus, but a subsequent will call it on YFS servers too in some circumstances. Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept") Signed-off-by:
-
David Howells authored
Remove yfs_fs_fetch_file_status() as it's no longer used. Signed-off-by: -
Gaurav Singh authored
Memset on the pointer right after malloc can cause a NULL pointer deference if it failed to allocate memory. A simple fix is to replace malloc()/memset() pair with a simple call to calloc(). Fixes: 0fca931a ("samples/bpf: program demonstrating access to xdp_rxq_info") Signed-off-by:
Gaurav Singh <gaurav1086@gmail.com> Signed-off-by:
-
Gene Chen authored
The driver name was accidentally removed when .probe() by was replaced by .probe_new() during an early patch review. [ 121.243012] EAX: c2a8bc64 EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 121.243012] ESI: c2a8bc79 EDI: 00000000 EBP: e54bdea8 ESP: e54bdea0 [ 121.243012] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010286 [ 121.243012] CR0: 80050033 CR2: 00000000 CR3: 02ec3000 CR4: 000006b0 [ 121.243012] Call Trace: [ 121.243012] kset_find_obj+0x3d/0xc0 [ 121.243012] driver_find+0x16/0x40 [ 121.243012] driver_register+0x49/0x100 [ 121.243012] ? i2c_for_each_dev+0x39/0x50 [ 121.243012] ? __process_new_adapter+0x20/0x20 [ 121.243012] ? cht_wc_driver_init+0x11/0x11 [ 121.243012] i2c_register_driver+0x30/0x80 [ 121.243012] ? intel_lpss_pci_driver_init+0x16/0x16 [ 121.243012] mt6360_pmu_driver_init+0xf/0x11 [ 121.243012] do_one_initcall+0x33/0x1a0 [ 121.243012] ? parse_args+0x1eb/0x3d0 [ 121.243012] ? __might_sleep+0x31/0x90 [ 121.243012] ? kernel_init_freeable+0x10a/0x17f [ 121.243012] kernel_init_freeable+0x12c/0x17f [ 121.243012] ? rest_init+0x110/0x110 [ 121.243012] kernel_init+0xb/0x100 [ 121.243012] ? schedule_tail_wrapper+0x9/0xc [ 121.243012] ret_from_fork+0x19/0x24 [ 121.243012] Modules linked in: [ 121.243012] CR2: 0000000000000000 [ 121.243012] random: get_random_bytes called from init_oops_id+0x3a/0x40 with crng_init=0 [ 121.243012] ---[ end trace 38a803400f1a2bee ]--- [ 121.243012] EIP: strcmp+0x11/0x30 Fixes: 7edd3634 ("mfd: Add support for PMIC MT6360") Signed-off-by:
Gene Chen <gene_chen@richtek.com> Reviewed-by:
Matthias Brugger <matthias.bgg@kernel.org> [Lee: Taking the opportunity to fix the compatible string too 's/_/-/'] Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
