- 30 Apr, 2013 4 commits
-
-
Benjamin Herrenschmidt authored
From Kumar Gala: << Add support for T4 and B4 SoC families from Freescale, e6500 altivec support, some various board fixes and other minor cleanups. >>
-
Benjamin Herrenschmidt authored
From Anatolij Gustschin: << There are some changes for mpc5121 generic platform code to support mpc5125 SoC and DTS files for ac14xx and MPC5125-TWR boards. >>
-
Michel Lespinasse authored
Update the powerpc slice_get_unmapped_area function to make use of vm_unmapped_area() instead of implementing a brute force search. Signed-off-by:
Michel Lespinasse <walken@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Tested-by:
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Acked-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michel Lespinasse authored
As all other architectures have been converted to use vm_unmapped_area(), we are about to retire the free_area_cache. This change simply removes the use of that cache in slice_get_unmapped_area(), which will most certainly have a performance cost. Next one will convert that function to use the vm_unmapped_area() infrastructure and regain the performance. Signed-off-by:
Rik van Riel <riel@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
- 29 Apr, 2013 3 commits
-
-
Kevin Hao authored
The reg property in the pci bridge device node is used to bind this device node to the pci bridge device. Then all the pci devices under this bridge could use the interrupt maps defined in this device node to do the irq translation. So if this property is missed, the pci traditional irq mechanism will not work. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Kevin Hao authored
In patch 34642bbb (powerpc/fsl-pci: Keep PCI SoC controller registers in pci_controller) we choose to keep the map of the PCI SoC controller registers. But we missed to delete the unmap in setup_pci_atmu function. This will cause the following call trace once we access the PCI SoC controller registers later. Unable to handle kernel paging request for data at address 0x8000080080040f14 Faulting instruction address: 0xc00000000002ea58 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=24 T4240 QDS Modules linked in: NIP: c00000000002ea58 LR: c00000000002eaf4 CTR: c00000000002eac0 REGS: c00000017e10b4a0 TRAP: 0300 Not tainted (3.9.0-rc1-00052-gfa3529f-dirty) MSR: 0000000080029000 <CE,EE,ME> CR: 28adbe22 XER: 00000000 SOFTE: 0 DEAR: 8000080080040f14, ESR: 0000000000000000 TASK = c00000017e100000[1] 'swapper/0' THREAD: c00000017e108000 CPU: 2 GPR00: 0000000000000000 c00000017e10b720 c0000000009928d8 c00000017e578e00 GPR04: 0000000000000000 000000000000000c 0000000000000001 c00000017e10bb40 GPR08: 0000000000000000 8000080080040000 0000000000000000 0000000000000016 GPR12: 0000000088adbe22 c00000000fffa800 c000000000001ba0 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c0000000008a5b70 GPR24: c0000000008af938 c0000000009a28d8 c0000000009bb5dc c00000017e10bb40 GPR28: c00000017e32a400 c00000017e10bc00 c00000017e32a400 c00000017e578e00 NIP [c00000000002ea58] .fsl_pcie_check_link+0x88/0xf0 LR [c00000000002eaf4] .fsl_indirect_read_config+0x34/0xb0 Call Trace: [c00000017e10b720] [c00000017e10b7a0] 0xc00000017e10b7a0 (unreliable) [c00000017e10ba30] [c00000000002eaf4] .fsl_indirect_read_config+0x34/0xb0 [c00000017e10bad0] [c00000000033aa08] .pci_bus_read_config_byte+0x88/0xd0 [c00000017e10bb90] [c00000000088d708] .pci_apply_final_quirks+0x9c/0x18c [c00000017e10bc40] [c0000000000013dc] .do_one_initcall+0x5c/0x1f0 [c00000017e10bcf0] [c00000000086ebac] .kernel_init_freeable+0x180/0x26c [c00000017e10bdb0] [c000000000001bbc] .kernel_init+0x1c/0x460 [c00000017e10be30] [c000000000000880] .ret_from_kernel_thread+0x64/0xe4 Instruction dump: 38210310 2b800015 4fdde842 7c600026 5463fffe e8010010 7c0803a6 4e800020 60000000 60000000 e92301d0 7c0004ac <80690f14> 0c030000 4c00012c 38210310 ---[ end trace 7a8fe0cbccb7d992 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by:
Roy Zang <tie-fei.zang@freescale.com> Signed-off-by:
-
Zhicheng Fan authored
Fix the following errors: Error: p1025rdb.dtsi:326.2-3 label or path, 'qe', not found Error: p1021si-post.dtsi:242.2-3 label or path, 'qe', not found FATAL ERROR: Syntax error parsing input tree Signed-off-by:
Zhicheng Fan <B32736@freescale.com> Signed-off-by:
-
- 26 Apr, 2013 33 commits
-
-
Anshuman Khandual authored
Provides basic enablement for perf branch stack sampling framework on POWER8 processor based platforms. Adds new BHRB related elements into cpu_hw_event structure to represent current BHRB config, BHRB filter configuration, manage context and to hold output BHRB buffer during PMU interrupt before passing to the user space. This also enables processing of BHRB data and converts them into generic perf branch stack data format. Signed-off-by:
Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by:
-
Anshuman Khandual authored
This patch populates BHRB specific data for power_pmu structure. It also implements POWER8 specific BHRB filter and configuration functions. Signed-off-by:
-
Anshuman Khandual authored
This patch adds couple of generic functions to power_pmu structure which would configure the BHRB and it's filters. It also adds representation of the number of BHRB entries present on the PMU. A new PMU flag PPMU_BHRB would indicate presence of BHRB feature. Signed-off-by:
-
Anshuman Khandual authored
This patch adds the basic assembly code to read BHRB buffer. BHRB entries are valid only after a PMU interrupt has happened (when MMCR0[PMAO]=1) and BHRB has been freezed. BHRB read should not be attempted when it is still enabled (MMCR0[PMAE]=1) and getting updated, as this can produce non-deterministic results. Signed-off-by:
-
Anshuman Khandual authored
This patch adds new POWER8 instruction encoding for reading and clearing Branch History Rolling Buffer entries. The new instruction 'mfbhrbe' (move from branch history rolling buffer entry) is used to read BHRB buffer entries and instruction 'clrbhrb' (clear branch history rolling buffer) is used to clear the entire buffer. The instruction 'clrbhrb' has straight forward encoding. But the instruction encoding format for reading the BHRB entries is like 'mfbhrbe RT, BHRBE' where it takes two arguments, i.e the index for the BHRB buffer entry to read and a general purpose register to put the value which was read from the buffer entry. Signed-off-by:
-
Michael Ellerman authored
This patch adds support for the power8 PMU to perf. Work is ongoing to add generic cache events. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Acked-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Michael Ellerman authored
On power8 we have a new SIER (Sampled Instruction Event Register), which captures information about instructions when we have random sampling enabled. Add support for loading the SIER into pt_regs, overloading regs->dar. Also set the new NO_SIPR flag in regs->result if we don't have SIPR. Update regs_sihv/sipr() to look for SIPR/SIHV in SIER. Signed-off-by:
-
Michael Ellerman authored
On power8 the presence or absence of SIPR depends on settings at runtime, so convert to using a dynamic flag for NO_SIPR. Existing backends that set NO_SIPR unconditionally set the dynamic flag obviously. Signed-off-by:
-
Michael Ellerman authored
Add an accessor for regs->result so we can use it to store more flags in future. Signed-off-by:
-
Michael Ellerman authored
On power8 the SIPR and SIHV are not in MMCRA, so convert the routines to take regs and change the names accordingly. Signed-off-by:
-
Michael Ellerman authored
In perf_ip_adjust() we potentially use the MMCRA[SLOT] field to adjust the reported IP of a sampled instruction. Currently the logic is written so that if the backend does NOT have the PPMU_ALT_SIPR flag set then we assume MMCRA[SLOT] exists. However on power8 we do not want to set ALT_SIPR (it's in a third location), and we also do not have MMCRA[SLOT]. So add a new flag which only indicates whether MMCRA[SLOT] exists. Naively we'd set it on everything except power6/7, because they set ALT_SIPR, and we've reversed the polarity of the flag. But it's more complicated than that. mpc7450 is 32-bit, and uses its own version of perf_ip_adjust() which doesn't use MMCRA[SLOT], so it doesn't need the new flag set and the behaviour is unchanged. PPC970 (and I assume power4) don't have MMCRA[SLOT], so shouldn't have the new flag set. This is a behaviour change on those cpus, though we were probably getting lucky and the bits in question were 0. power5 and power5+ set the new flag, behaviour unchanged. power6 & power7 do not set the new flag, behaviour unchanged. Signed-off-by:
-
Michael Ellerman authored
For both HV and guest kernels, intialise PMU regs to something sane. Signed-off-by:
-
Gavin Shan authored
Ben found the root cause. Commit 37f02195 ("powerpc/pci: fix PCI-e devices rescan issue on powerpc platform") overwrites the IOMMU table of PCI device while enabling PCI device. The patch intends to fix the IOMMU table after that point. Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
-
Gavin Shan authored
The patch intends to build 32-bits DMA space for individual PEs on PHB3. The TVE# is recognized by the combo of PE# and fixed bits from DMA address, which is zero for 32-bits DMA space. Signed-off-by:
-
Gavin Shan authored
The TCE should be invalidated while it's created or free'd. The approach to do that for IODA1 and IODA2 compliant PHBs are different. So the patch differentiate them with different functions called to do that for IODA1 and IODA2 compliant PHBs. It's notable that the PCI address is used to invalidate the corresponding TCE on IODA2 compliant PHB3. Signed-off-by:
-
Gavin Shan authored
The EOI handler of MSI/MSI-X interrupts for P8 (PHB3) need additional steps to handle the P/Q bits in IVE before EOIing the corresponding interrupt. The patch changes the EOI handler to cover that. we have individual IRQ chip in each PHB instance. During the MSI IRQ setup time, the IRQ chip is copied over from the original one for that IRQ, and the EOI handler is patched with the one that will handle the P/Q bits (As Ben suggested). Signed-off-by:
-
Gavin Shan authored
As Michael Ellerman suggested, to add CONFIG_POWERNV_MSI for PowerNV platform. That's similar to CONFIG_PSERIES_MSI for pSeries platform. For now, we don't make it dependent on CONFIG_EEH since it's not ready to enable that yet. Apart from that, we also enable CONFIG_PPC_MSI_BITMAP on selecting CONFIG_POWERNV_MSI. Signed-off-by:
-
Gavin Shan authored
The patch intends to initialize PHB3 during system boot stage. The flag "PNV_PHB_MODEL_PHB3" is introduced to differentiate IODA2 compatible PHB3 from other types of PHBs. Signed-off-by: -
Paul Mackerras authored
Building a 64-bit powerpc kernel with PR KVM enabled currently gives this error: AS arch/powerpc/kernel/head_64.o arch/powerpc/kernel/exceptions-64s.S: Assembler messages: arch/powerpc/kernel/exceptions-64s.S:258: Error: attempt to move .org backwards make[2]: *** [arch/powerpc/kernel/head_64.o] Error 1 This happens because the MASKABLE_EXCEPTION_PSERIES macro turns into 33 instructions, but we only have space for 32 at the decrementer interrupt vector (from 0x900 to 0x980). In the code generated by the MASKABLE_EXCEPTION_PSERIES macro, we currently have two instances of the HMT_MEDIUM macro, which has the effect of setting the SMT thread priority to medium. One is the first instruction, and is overwritten by a no-op on processors where we save the PPR (processor priority register), that is, POWER7 or later. The other is after we have saved the PPR. In order to reduce the code at 0x900 by one instruction, we omit the first HMT_MEDIUM. On processors without SMT this will have no effect since HMT_MEDIUM is a no-op there. On POWER5 and RS64 machines this will mean that the first few instructions take a little longer in the case where a decrementer interrupt occurs when the hardware thread is running at low SMT priority. On POWER6 and later machines, the hardware automatically boosts the thread priority when a decrementer interrupt is taken if the thread priority was below medium, so this change won't make any difference. The alternative would be to branch out of line after saving the CFAR. However, that would incur an extra overhead on all processors, whereas the approach adopted here only adds overhead on older threaded processors. Signed-off-by:
-
Nathan Fontenot authored
There are instances in which we do not want topology updates to occur. In order to allow this a /proc interface (/proc/powerpc/topology_updates) is introduced so that topology updates can be enabled and disabled. This patch also adds a prrn_is_enabled() call so that PRRN events are handled in the kernel only if topology updating is enabled. Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
-
Nathan Fontenot authored
The Linux kernel and platform firmware negotiate their mutual support of the PRRN option via the ibm,client-architecture-support interface. This patch simply sets the appropriate fields in the client architecture vector to indicate Linux support for PRRN and will allow the firmware to report PRRN events via the RTAS event-scan mechanism. Signed-off-by:
-
Jesse Larrew authored
The new PRRN firmware feature provides a more convenient and event-driven interface than VPHN for notifying Linux of changes to the NUMA affinity of platform resources. However, for practical reasons, it may not be feasible for some customers to update to the latest firmware. For these customers, the VPHN feature supported on previous firmware versions may still be the best option. The VPHN feature was previously disabled due to races with the load balancing code when accessing the NUMA cpu maps, but the new stop_machine() approach protects the NUMA cpu maps from these concurrent accesses. It should be safe to re-enable this feature now. Signed-off-by:
-
Jesse Larrew authored
The following patch adds vdso_getcpu_init(), which stores the NUMA node for a cpu in SPRG3: Commit 18ad51dd ("powerpc: Add VDSO version of getcpu") adds vdso_getcpu_init(), which stores the NUMA node for a cpu in SPRG3. This patch ensures that this information is also updated when the NUMA affinity of a cpu changes. Signed-off-by:
-
Nathan Fontenot authored
The new PRRN firmware feature allows CPU and memory resources to be transparently reassigned across NUMA boundaries. When this happens, the kernel must update the node maps to reflect the new affinity information. Although the NUMA maps can be protected by locking primitives during the update itself, this is insufficient to prevent concurrent accesses to these structures. Since cpumask_of_node() hands out a pointer to these structures, they can still be modified outside of the lock. Furthermore, tracking down each usage of these pointers and adding locks would be quite invasive and difficult to maintain. The approach used is to make a list of affected cpus and call stop_machine to have the update routine run on each of the affected cpus allowing them to update themselves. Each cpu finds itself in the list of cpus and makes the appropriate updates. We need to have each cpu do this for themselves to handle calls to vdso_getcpu_init() added in a subsequent patch. Situations like these are best handled using stop_machine(). Since the NUMA affinity updates are exceptionally rare events, this approach has the benefit of not adding any overhead while accessing the NUMA maps during normal operation. Signed-off-by:
-
Jesse Larrew authored
Platform events such as partition migration or the new PRRN firmware feature can cause the NUMA characteristics of a CPU to change, and these changes will be reflected in the device tree nodes for the affected CPUs. This patch registers a handler for Open Firmware device tree updates and reconfigures the CPU and node maps whenever the associativity changes. Currently, this is accomplished by marking the affected CPUs in the cpu_associativity_changes_mask and allowing arch_update_cpu_topology() to retrieve the new associativity information using hcall_vphn(). Protecting the NUMA cpu maps from concurrent access during an update operation will be addressed in a subsequent patch in this series. Signed-off-by:
-
Nathan Fontenot authored
Update the numa code to use the updated firmware_has_feature() when checking for type 1 affinity. Signed-off-by:
-
Nathan Fontenot authored
The firmware_has_feature() function makes it easy to check for supported features of the hypervisor. This patch extends the capability of firmware_has_feature() to include checking for specified bits in vector 5 of the architecture vector as reported in the device tree. As part of this the #defines used for the architecture vector are re-defined such that each option has the index into vector 5 and the feature bit encoded into it. This makes checking for architecture bits when initiating data for firmware_has_feature much easier. Signed-off-by:
-
Nathan Fontenot authored
When iterating over the entries in firmware_features_table we only need to go over the actual number of entries in the array instead of declaring it to be bigger and checking to make sure there is a valid entry in every slot. This patch removes the FIRMWARE_MAX_FEATURES #define and replaces the array looping with the use of ARRAY_SIZE(). Signed-off-by:
-
Nathan Fontenot authored
As part of handling of PRRN events we need to check vector 5 of the architecture vector bits reported in the device tree to ensure PRRN event handling is enabled. To do this firmware_has_feature() is updated (in a subsequent patch) to make this check vector 5 bits. To avoid having to re-define bits in the architecture vector the bit definitions are moved to prom.h. Signed-off-by:
-
Jesse Larrew authored
A PRRN event is signaled via the RTAS event-scan mechanism, which returns a Hot Plug Event message "fixed part" indicating "Platform Resource Reassignment". In response to the Hot Plug Event message, we must call ibm,update-nodes to determine which resources were reassigned and then ibm,update-properties to obtain the new affinity information about those resources. The PRRN event-scan RTAS message contains only the "fixed part" with the "Type" field set to the value 160 and no Extended Event Log. The four-byte Extended Event Log Length field is re-purposed (since no Extended Event Log message is included) to pass the "scope" parameter that causes the ibm,update-nodes to return the nodes affected by the specific resource reassignment. This patch adds a handler for RTAS events. The function pseries_devicetree_update() (from mobility.c) is used to make the ibm,update-nodes/ibm,update-properties RTAS calls. Updating the NUMA maps (handled by a subsequent patch) will require significant processing, so pseries_devicetree_update() is called from an asynchronous workqueue to allow event processing to continue. PRRN RTAS events on pseries systems are rare events that have to be initiated from the HMC console for the system by an IBM tech. This allows us to assume that these events are widely spaced. Additionally, all work on the queue is flushed before handling any new work to ensure we only have one event in flight being handled at a time. Signed-off-by:
-
Nathan Fontenot authored
Correct parsing of the buffer returned from ibm,update-properties. The first element is a length and the path to the property which is slightly different from the list of properties in the buffer so we need to specifically handle this. Signed-off-by:
-
Nathan Fontenot authored
Newer firmware on Power systems can transparently reassign platform resources (CPU and Memory) in use. For instance, if a processor or memory unit is predicted to fail, the platform may transparently move the processing to an equivalent unused processor or the memory state to an equivalent unused memory unit. However, reassigning resources across NUMA boundaries may alter the performance of the partition. When such reassignment is necessary, the Platform Resource Reassignment Notification (PRRN) option provides a mechanism to inform the Linux kernel of changes to the NUMA affinity of its platform resources. When rtasd receives a PRRN event, it needs to make a series of RTAS calls (ibm,update-nodes and ibm,update-properties) to retrieve the updated device tree information. These calls are already handled in the pseries_devicetree_update() routine used in partition migration. This patch exposes pseries_devicetree_update() to make it accessible to other pseries routines, this patch also updates pseries_devicetree_update() to take a 32-bit scope parameter. The scope value, which was previously hard coded to 1 for partition migration, is used for the RTAS calls ibm,update-nodes/properties to update the device tree. Signed-off-by:
-
Michael Neuling authored
POWER8 allows us to take interrupts with the MMU on. This gives us a second set of vectors offset at 0x4000. Unfortunately when coping these vectors we missed checking for MSR HV for hardware interrupts (0x500). This results in us trying to use HSRR0/1 when HV=0, rather than SRR0/1 on HW IRQs The below fixes this to check CPU_FTR_HVMODE when patching the code at 0x4500. Also we remove the check for CPU_FTR_ARCH_206 since relocation on IRQs are only available in arch 2.07 and beyond. Thanks to benh for helping find this. Signed-off-by:
Michael Neuling <mikey@neuling.org> CC: <stable@vger.kernel.org> Signed-off-by:
-
