- 31 May, 2005 8 commits
-
-
Scott Murray authored
Here is my third attempt at a patch to further update the CompactPCI hotplug driver infrastructure to address the pci_enable_device issue discussed on the list as well as a few other issues I discovered during some more testing. This version addresses a few more issues pointed out by Prarit Bhargava. Changes include: - cpci_enable_device and its recursive calling of pci_enable_device on new devices removed. - Use list_rwsem to avoid slot status change races between disable_slot and check_slots. - Fixed oopsing in cpci_hp_unregister_bus caused by calling list_del on a slot after calling pci_hp_deregister. - Removed kfree calls in cleanup_slots since release_slot will have done it already. - Reworked init_slots a bit to fix latch and adapter file updating on subsequent calls to cpci_hp_start. - Improved sanity checking in cpci_hp_register_controller. - Now shut things down correctly in cpci_hotplug_exit. - Switch to pci_get_slot instead of deprecated pci_find_slot. - A bunch of CodingStyle fixes. Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andy Currid authored
Here's the 2.6 amd74xx patch for NVIDIA MCP51. Signed-off-by: Andy Currid <acurrid@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kenji Kaneshige authored
Current shpchp driver doesn't seem to program command register to enable PERR and SERR properly. The following patch fixes this issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kenji Kaneshige authored
Current shpchp driver doesn't seem to program _HPP values properly. The following patch fixes this issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Tony Luck authored
I was gently reminded that there are per-cpu forms of the EXPORT_SYMBOL macros. Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Jens Axboe authored
Only the address needs alignment of mask bits, length should work with a relaxed alignment check. Signed-off-by: Jens Axboe <axboe@suse.de> [ This is take 2: make the length check be for 16-byte alignment, not just word alignment. That should hopefully keep everybody happy, while still allowing CD writing with DMA ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paul Mackerras authored
When I sent in the patch adding the code for the kernel to tell the firmware about its capabilities on pSeries machines, I included the function to give the capabilities to firmware but somehow forgot the hunk that adds the call to the new function. This patch adds the call. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 30 May, 2005 9 commits
-
-
David S. Miller authored
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
We are intentionally ignoring the copy_to_user() value, make it clear to the compiler too. Noted by Jeff Garzik. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pravin B. Shelar authored
It cannot work properly, so just ignore it in drr and rr multipath algorithms just like the random multipath algorithm does. Suggested by Herbert Xu. Signed-off by: Pravin B. Shelar <pravins@calsoftinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Ellerman authored
This patch adds is_multicast_ether_addr() to go along with is_valid_ether_addr() and friends. It then changes is_valid_ether_addr() to use the new macro, and fixes up the comment on that function to move implementation details out of the API doco. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harald Welte authored
Add an option to make secondary IP addresses get promoted when primary IP addresses are removed from the device. It defaults to off to preserve existing behavior. Signed-off-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
- 29 May, 2005 18 commits
-
-
Michael Chan authored
Add tg3_nvram_lock() and tg3_nvram_unlock() calls around tg3_halt_cpu(). It is possible that the bootcode may be loading code from nvram during this call and stopping the cpu without getting the lock may cause uncompleted nvram data to be left in the nvram data register. Subsequent calls to read/write nvram data will fail. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
This test uses the previously added tg3_test_interrupt() to perform the test. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The test will loopback one packet in MAC loopback mode and verify the packet data. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Add a reset kind parameter to tg3_halt() so that the RESET_KIND_SUSPEND parameter can be passed to tg3_halt() before doing offline tests. All other calls to tg3_halt() will use the RESET_KIND_SHUTDOWN parameter. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
This improves the bridge local receive path by avoiding going through another softirq. The bridge receive path is already being called from a netif_receive_skb() there is no point in going through another receiveq round trip. Recursion is limited because bridge can never be a port of a bridge so handle_bridge() always returns. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Avoid poisoning of the bridge forwarding table by frames that have been dropped by filtering. This prevents spoofed source addresses on hostile side of bridge from causing packet leakage, a small but possible security risk. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Make features of the bridge pseudo-device be a subset of the underlying devices. Motivated by Xen and others who use bridging to do failover. Signed-off-by: Catalin BOIE <catab at umrella.ro> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
The features field in netdevice is really a bitmask, and bitmask's should be unsigned. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Resend of earlier patch (no changes) from Catalin used to provide device feature change notification. Signed-off-by: Catalin BOIE <catab at umbrella.ro> Acked-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jeff Garzik authored
-
-
Vojtech Pavlik authored
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 28 May, 2005 5 commits
-
-
Kumar Gala authored
Trying to initialize the i8259 PIC will not work if CONFIG_PCI is not enabled. The kernel hangs if the initialization is tried. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Kumar Gala authored
This change allows mpc83xx_restart to issue a software reset. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Kumar Gala authored
The call to io_block_mapping was creating an invalid BAT entry because the value of BCSR_SIZE (32K) is too small to be used in a BAT (128K min). This change removes the io_block_mapping call since these registers can easily be mapped using ioremap at the point of use. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Kumar Gala authored
The error checking for emulation of load string instructions was overly generous and would cause certain valid forms of the instructions to be treated as illegal. We drop the range checking since the architecture allows this to be boundedly undefined. Tests on CPUs that support these instructions appear not do cause illegal instruction traps on range errors and just allow the execution to occur. Thanks to Kim Phillips for debugging this and figuring out what real HW was doing. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Kumar Gala authored
The patch that introduced support for the VIA chipset broke building if CONFIG_PCI is disabled. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-