- 18 Apr, 2017 40 commits
-
-
David Sterba authored
All (1) callers pass the same value. Signed-off-by:David Sterba <dsterba@suse.com>
-
David Sterba authored
All (1) callers pass the same value. Signed-off-by: -
Liu Bo authored
In raid56 scenario, after trying parity recovery, we didn't set mirror_num for btrfs_bio with failed mirror_num, hence end_bio_extent_readpage() will report a random mirror_num in dmesg log. Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
-
Liu Bo authored
Scrub repairs data by the unit called scrub_block, which may contain several pages. Scrub always tries to look up a good copy of a whole block, but if there's no such copy, it tries to do repair page by page. If we don't set page's io_error when checking this bad copy, in the last step, we may skip this page when repairing bad copy from good copy. Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
David Sterba authored
There are several operations, usually started from ioctls, that cannot run concurrently. The status is tracked in mutually_exclusive_operation_running as an atomic_t. We can easily track the status as one of the per-filesystem flag bits with same synchronization guarantees. The conversion replaces: * atomic_xchg(..., 1) -> test_and_set_bit(FLAG, ...) * atomic_set(..., 0) -> clear_bit(FLAG, ...) Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
-
Goldwyn Rodrigues authored
We are facing the same problem with EDQUOT which was experienced with ENOSPC. Not sure if we require a full ticketing system such as ENOSPC, but here is a quick fix, which may be too big a hammer. Quotas are reserved during the start of an operation, incrementing qg->reserved. However, it is written to disk in a commit_transaction which could take as long as commit_interval. In the meantime there could be deletions which are not accounted for because deletions are accounted for only while committed (free_refroot). So, when we get a EDQUOT flush the data to disk and try again. This fixes fstests btrfs/139. Here is a sample script which shows this issue. DEVICE=/dev/vdb MOUNTPOINT=/mnt TESTVOL=$MOUNTPOINT/tmp QUOTA=5 PROG=btrfs DD_BS="4k" DD_COUNT="256" RUN_TIMES=5000 mkfs.btrfs -f $DEVICE mount -o commit=240 $DEVICE $MOUNTPOINT $PROG subvolume create $TESTVOL $PROG quota enable $TESTVOL $PROG qgroup limit ${QUOTA}G $TESTVOL typeset -i DD_RUN_GOOD typeset -i QUOTA function _check_cmd() { if [[ ${?} > 0 ]]; then echo -n "$(date) E: Running previous command" echo ${*} echo "Without sync" $PROG qgroup show -pcreFf ${TESTVOL} echo "With sync" $PROG qgroup show -pcreFf --sync ${TESTVOL} exit 1 fi } while true; do DD_RUN_GOOD=$RUN_TIMES while (( ${DD_RUN_GOOD} != 0 )); do dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT} _check_cmd "dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT}" DD_RUN_GOOD=(${DD_RUN_GOOD}-1) done $PROG qgroup show -pcref $TESTVOL echo "----------- Cleanup ---------- " rm $TESTVOL/quotatest* done Signed-off-by:Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by:
-
Edmund Nadolski authored
Define the SEQ_LAST macro to replace (u64)-1 in places where said value triggers a special-case ref search behavior. Signed-off-by:
Edmund Nadolski <enadolski@suse.com> Reviewed-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
-
Edmund Nadolski authored
Replace hardcoded numeric values for __merge_refs 'mode' argument with descriptive constants. Signed-off-by:
-
David Sterba authored
The members have been effectively unused since "Btrfs: rework qgroup accounting" (fcebe456), there's no substitute for assert_qgroups_uptodate so it's removed as well. Reviewed-by:
-
David Sterba authored
The name is misleading and the local variable serves no purpose. Reviewed-by:
-
David Sterba authored
We can read fs_info from dev. Reviewed-by:
-
David Sterba authored
We can read fs_info from dev. Reviewed-by:
-
David Sterba authored
We can read fs_info from eb. Reviewed-by:
-
David Sterba authored
We can preallocate the node so insertion does not have to do that under the lock. The GFP flags for the global radix tree are initialized to GFP_NOFS & ~__GFP_DIRECT_RECLAIM but we can use GFP_KERNEL, because readahead is optional and not on any critical writeout path. Reviewed-by:
-
David Sterba authored
We can preallocate the node so insertion does not have to do that under the lock. The GFP flags for the per-device radix tree are initialized to GFP_NOFS & ~__GFP_DIRECT_RECLAIM but we can use GFP_KERNEL, same as an allocation above anyway, but also because readahead is optional and not on any critical writeout path. Reviewed-by:
-
Hans van Kranenburg authored
The btrfs_balance_args are only used for the balance ioctl, so use __u instead of __le here for consistency. The __le usage was introduced in bc309467 and dee32d0a and was probably a result of copy/pasting when the code was written. The usage of __le did not break anything, but it's unnecessary. Also, this change makes the code less confusing for the careful reader. Signed-off-by:
Hans van Kranenburg <hans.van.kranenburg@mendix.com> Reviewed-by:
-
Goldwyn Rodrigues authored
Code cleanup. The code block is for !(*flags & MS_RDONLY). We don't need to check it again. Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Liu Bo authored
We also don't bother to flush free space cache while with free space tree. Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
Liu Bo authored
These two BUG_ON()s would never be true, ensured by callers' logic. Reviewed-by:
-
Liu Bo authored
This adds a helper to show directly whether ops require full stripe. Reviewed-by:
-
Liu Bo authored
With this, we can avoid allocating memory for dev replace copies if the target dev is not available. Reviewed-by:
-
Liu Bo authored
Since this part is mostly independent, this moves it to a separate function. Reviewed-by:
-
Liu Bo authored
As the part of getting extra mirror in __btrfs_map_block is independent, this puts it into a separate function. Reviewed-by:
-
Liu Bo authored
Since DISCARD is not as important as an operation like write, we don't copy it to target device during replace, and it makes __btrfs_map_block less complex. Signed-off-by:
-
Liu Bo authored
We have similar code here and there, this merges them into a helper. Signed-off-by:
-
Liu Bo authored
While debugging truncate problems, I found that these tracepoints could help us quickly know what went wrong. Two sets of tracepoints are created to track regular/prealloc file item and inline file item respectively, I put inline as a separate one since what inline file items cares about are way less than the regular one. This adds four tracepoints: - btrfs_get_extent_show_fi_regular - btrfs_get_extent_show_fi_inline - btrfs_truncate_show_fi_regular - btrfs_truncate_show_fi_inline Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David Windsor <dwindsor@gmail.com> Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
