- 27 Apr, 2017 1 commit
-
-
Chris Mason authored
Merge branch 'for-chris-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/fdmanana/linux into for-linus-4.12
-
- 26 Apr, 2017 7 commits
-
-
Filipe Manana authored
Currently when there are buffered writes that were not yet flushed and they fall within allocated ranges of the file (that is, not in holes or beyond eof assuming there are no prealloc extents beyond eof), btrfs simply reports an incorrect number of used blocks through the stat(2) system call (or any of its variants), regardless of mount options or inode flags (compress, compress-force, nodatacow). This is because the number of blocks used that is reported is based on the current number of bytes in the vfs inode plus the number of dealloc bytes in the btrfs inode. The later covers bytes that both fall within allocated regions of the file and holes. Example scenarios where the number of reported blocks is wrong while the buffered writes are not flushed: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt/sdc $ xfs_io -f -c "pwrite -S 0xaa 0 64K" /mnt/sdc/foo1 wrote 65536/65536 bytes at offset 0 64 KiB, 16 ops; 0.0000 sec (259.336 MiB/sec and 66390.0415 ops/sec) $ sync $ xfs_io -c "pwrite -S 0xbb 0 64K" /mnt/sdc/foo1 wrote 65536/65536 bytes at offset 0 64 KiB, 16 ops; 0.0000 sec (192.308 MiB/sec and 49230.7692 ops/sec) # The following should have reported 64K... $ du -h /mnt/sdc/foo1 128K /mnt/sdc/foo1 $ sync # After flushing the buffered write, it now reports the correct value. $ du -h /mnt/sdc/foo1 64K /mnt/sdc/foo1 $ xfs_io -f -c "falloc -k 0 128K" -c "pwrite -S 0xaa 0 64K" /mnt/sdc/foo2 wrote 65536/65536 bytes at offset 0 64 KiB, 16 ops; 0.0000 sec (520.833 MiB/sec and 133333.3333 ops/sec) $ sync $ xfs_io -c "pwrite -S 0xbb 64K 64K" /mnt/sdc/foo2 wrote 65536/65536 bytes at offset 65536 64 KiB, 16 ops; 0.0000 sec (260.417 MiB/sec and 66666.6667 ops/sec) # The following should have reported 128K... $ du -h /mnt/sdc/foo2 192K /mnt/sdc/foo2 $ sync # After flushing the buffered write, it now reports the correct value. $ du -h /mnt/sdc/foo2 128K /mnt/sdc/foo2 So the number of used file blocks is simply incorrect, unlike in other filesystems such as ext4 and xfs for example, but only while the buffered writes are not flushed. Fix this by tracking the number of delalloc bytes that fall within holes and beyond eof of a file, and use instead this new counter when reporting the number of used blocks for an inode. Another different problem that exists is that the delalloc bytes counter is reset when writeback starts (by clearing the EXTENT_DEALLOC flag from the respective range in the inode's iotree) and the vfs inode's bytes counter is only incremented when writeback finishes (through insert_reserved_file_extent()). Therefore while writeback is ongoing we simply report a wrong number of blocks used by an inode if the write operation covers a range previously unallocated. While this change does not fix this problem, it does minimizes it a lot by shortening that time window, as the new dealloc bytes counter (new_delalloc_bytes) is only decremented when writeback finishes right before updating the vfs inode's bytes counter. Fully fixing this second problem is not trivial and will be addressed later by a different patch. Signed-off-by:Filipe Manana <fdmanana@suse.com>
-
Filipe Manana authored
Normally we don't have inline extents followed by regular extents, but there's currently at least one harmless case where this happens. For example, when the page size is 4Kb and compression is enabled: $ mkfs.btrfs -f /dev/sdb $ mount -o compress /dev/sdb /mnt $ xfs_io -f -c "pwrite -S 0xaa 0 4K" -c "fsync" /mnt/foobar $ xfs_io -c "pwrite -S 0xbb 8K 4K" -c "fsync" /mnt/foobar In this case we get a compressed inline extent, representing 4Kb of data, followed by a hole extent and then a regular data extent. The inline extent was not expanded/converted to a regular extent exactly because it represents 4Kb of data. This does not cause any apparent problem (such as the issue solved by commit e1699d2d ("btrfs: add missing memset while reading compressed inline extents")) except trigger an unexpected case in the incremental send code path that makes us issue an operation to write a hole when it's not needed, resulting in more writes at the receiver and wasting space at the receiver. So teach the incremental send code to deal with this particular case. The issue can be currently triggered by running fstests btrfs/137 with compression enabled (MOUNT_OPTIONS="-o compress" ./check btrfs/137). Signed-off-by:
Liu Bo <bo.li.liu@oracle.com>
-
Filipe Manana authored
If the call to btrfs_qgroup_reserve_data() failed, we were leaking an extent map structure. The failure can happen either due to an -ENOMEM condition or, when quotas are enabled, due to -EDQUOT for example. Signed-off-by:
David Sterba <dsterba@suse.com>
-
Filipe Manana authored
When using compression, if we fail to insert an inline extent we incorrectly end up attempting to free the reserved data space twice, once through extent_clear_unlock_delalloc(), because we pass it the flag EXTENT_DO_ACCOUNTING, and once through a direct call to btrfs_free_reserved_data_space_noquota(). This results in a trace like the following: [ 834.576240] ------------[ cut here ]------------ [ 834.576825] WARNING: CPU: 2 PID: 486 at fs/btrfs/extent-tree.c:4316 btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs] [ 834.579501] Modules linked in: btrfs crc32c_generic xor raid6_pq ppdev i2c_piix4 acpi_cpufreq psmouse tpm_tis parport_pc pcspkr serio_raw tpm_tis_core sg parport evdev i2c_core tpm button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio scsi_mod e1000 floppy [last unloaded: btrfs] [ 834.592116] CPU: 2 PID: 486 Comm: kworker/u32:4 Not tainted 4.10.0-rc8-btrfs-next-37+ #2 [ 834.593316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [ 834.595273] Workqueue: btrfs-delalloc btrfs_delalloc_helper [btrfs] [ 834.596103] Call Trace: [ 834.596103] dump_stack+0x67/0x90 [ 834.596103] __warn+0xc2/0xdd [ 834.596103] warn_slowpath_null+0x1d/0x1f [ 834.596103] btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs] [ 834.596103] compress_file_range.constprop.42+0x2fa/0x3fc [btrfs] [ 834.596103] ? submit_compressed_extents+0x3a7/0x3a7 [btrfs] [ 834.596103] async_cow_start+0x32/0x4d [btrfs] [ 834.596103] btrfs_scrubparity_helper+0x187/0x3e7 [btrfs] [ 834.596103] btrfs_delalloc_helper+0xe/0x10 [btrfs] [ 834.596103] process_one_work+0x273/0x4e4 [ 834.596103] worker_thread+0x1eb/0x2ca [ 834.596103] ? rescuer_thread+0x2b6/0x2b6 [ 834.596103] kthread+0x100/0x108 [ 834.596103] ? __list_del_entry+0x22/0x22 [ 834.596103] ret_from_fork+0x2e/0x40 [ 834.611656] ---[ end trace 719902fe6bdef08f ]--- So fix this by not calling directly btrfs_free_reserved_data_space_noquota() if an error happened. Signed-off-by: -
Filipe Manana authored
When attempting to COW a file range (we are starting writeback and doing COW), if we manage to reserve an extent for the range we will write into but fail after reserving it and before creating the respective ordered extent, we end up in an error path where we attempt to decrement the data space's bytes_may_use counter after we already did it while reserving the extent, leading to a warning/trace like the following: [ 847.621524] ------------[ cut here ]------------ [ 847.625441] WARNING: CPU: 5 PID: 4905 at fs/btrfs/extent-tree.c:4316 btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs] [ 847.633704] Modules linked in: btrfs crc32c_generic xor raid6_pq acpi_cpufreq i2c_piix4 ppdev psmouse tpm_tis serio_raw pcspkr parport_pc tpm_tis_core i2c_core sg [ 847.644616] CPU: 5 PID: 4905 Comm: xfs_io Not tainted 4.10.0-rc8-btrfs-next-37+ #2 [ 847.648601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [ 847.648601] Call Trace: [ 847.648601] dump_stack+0x67/0x90 [ 847.648601] __warn+0xc2/0xdd [ 847.648601] warn_slowpath_null+0x1d/0x1f [ 847.648601] btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs] [ 847.648601] btrfs_clear_bit_hook+0x140/0x258 [btrfs] [ 847.648601] clear_state_bit+0x87/0x128 [btrfs] [ 847.648601] __clear_extent_bit+0x222/0x2b7 [btrfs] [ 847.648601] clear_extent_bit+0x17/0x19 [btrfs] [ 847.648601] extent_clear_unlock_delalloc+0x3b/0x6b [btrfs] [ 847.648601] cow_file_range.isra.39+0x387/0x39a [btrfs] [ 847.648601] run_delalloc_nocow+0x4d7/0x70e [btrfs] [ 847.648601] ? arch_local_irq_save+0x9/0xc [ 847.648601] run_delalloc_range+0xa7/0x2b5 [btrfs] [ 847.648601] writepage_delalloc.isra.31+0xb9/0x15c [btrfs] [ 847.648601] __extent_writepage+0x249/0x2e8 [btrfs] [ 847.648601] extent_write_cache_pages.constprop.33+0x28b/0x36c [btrfs] [ 847.648601] ? arch_local_irq_save+0x9/0xc [ 847.648601] ? mark_lock+0x24/0x201 [ 847.648601] extent_writepages+0x4b/0x5c [btrfs] [ 847.648601] ? btrfs_writepage_start_hook+0xed/0xed [btrfs] [ 847.648601] btrfs_writepages+0x28/0x2a [btrfs] [ 847.648601] do_writepages+0x23/0x2c [ 847.648601] __filemap_fdatawrite_range+0x5a/0x61 [ 847.648601] filemap_fdatawrite_range+0x13/0x15 [ 847.648601] btrfs_fdatawrite_range+0x20/0x46 [btrfs] [ 847.648601] start_ordered_ops+0x19/0x23 [btrfs] [ 847.648601] btrfs_sync_file+0x136/0x42c [btrfs] [ 847.648601] vfs_fsync_range+0x8c/0x9e [ 847.648601] vfs_fsync+0x1c/0x1e [ 847.648601] do_fsync+0x31/0x4a [ 847.648601] SyS_fsync+0x10/0x14 [ 847.648601] entry_SYSCALL_64_fastpath+0x18/0xad [ 847.648601] RIP: 0033:0x7f5b05200800 [ 847.648601] RSP: 002b:00007ffe204f71c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004a [ 847.648601] RAX: ffffffffffffffda RBX: ffffffff8109637b RCX: 00007f5b05200800 [ 847.648601] RDX: 00000000008bd0a0 RSI: 00000000008bd2e0 RDI: 0000000000000003 [ 847.648601] RBP: ffffc90001d67f98 R08: 000000000000ffff R09: 000000000000001f [ 847.648601] R10: 00000000000001f6 R11: 0000000000000246 R12: 0000000000000046 [ 847.648601] R13: ffffc90001d67f78 R14: 00007f5b054be740 R15: 00007f5b054be740 [ 847.648601] ? trace_hardirqs_off_caller+0x3f/0xaa [ 847.685787] ---[ end trace 2a4a3e15382508e8 ]--- So fix this by not attempting to decrement the data space info's bytes_may_use counter if we already reserved the extent and an error happened before creating the ordered extent. We are already correctly freeing the reserved extent if an error happens, so there's no additional measure needed. Signed-off-by:
-
Qu Wenruo authored
[BUG] If run_delalloc_range() returns error and there is already some ordered extents created, btrfs will be hanged with the following backtrace: Call Trace: __schedule+0x2d4/0xae0 schedule+0x3d/0x90 btrfs_start_ordered_extent+0x160/0x200 [btrfs] ? wake_atomic_t_function+0x60/0x60 btrfs_run_ordered_extent_work+0x25/0x40 [btrfs] btrfs_scrubparity_helper+0x1c1/0x620 [btrfs] btrfs_flush_delalloc_helper+0xe/0x10 [btrfs] process_one_work+0x2af/0x720 ? process_one_work+0x22b/0x720 worker_thread+0x4b/0x4f0 kthread+0x10f/0x150 ? process_one_work+0x720/0x720 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x2e/0x40 [CAUSE] |<------------------ delalloc range --------------------------->| | OE 1 | OE 2 | ... | OE n | |<>| |<---------- cleanup range --------->| || \_=> First page handled by end_extent_writepage() in __extent_writepage() The problem is caused by error handler of run_delalloc_range(), which doesn't handle any created ordered extents, leaving them waiting on btrfs_finish_ordered_io() to finish. However after run_delalloc_range() returns error, __extent_writepage() won't submit bio, so btrfs_writepage_end_io_hook() won't be triggered except the first page, and btrfs_finish_ordered_io() won't be triggered for created ordered extents either. So OE 2~n will hang forever, and if OE 1 is larger than one page, it will also hang. [FIX] Introduce btrfs_cleanup_ordered_extents() function to cleanup created ordered extents and finish them manually. The function is based on existing btrfs_endio_direct_write_update_ordered() function, and modify it to act just like btrfs_writepage_endio_hook() but handles specified range other than one page. After fix, delalloc error will be handled like: |<------------------ delalloc range --------------------------->| | OE 1 | OE 2 | ... | OE n | |<>|<-------- ----------->|<------ old error handler --------->| || || || \_=> Cleaned up by cleanup_ordered_extents() \_=> First page handled by end_extent_writepage() in __extent_writepage() Signed-off-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by:
-
Qu Wenruo authored
[BUG] When btrfs_reloc_clone_csum() reports error, it can underflow metadata and leads to kernel assertion on outstanding extents in run_delalloc_nocow() and cow_file_range(). BTRFS info (device vdb5): relocating block group 12582912 flags data BTRFS info (device vdb5): found 1 extents assertion failed: inode->outstanding_extents >= num_extents, file: fs/btrfs//extent-tree.c, line: 5858 Currently, due to another bug blocking ordered extents, the bug is only reproducible under certain block group layout and using error injection. a) Create one data block group with one 4K extent in it. To avoid the bug that hangs btrfs due to ordered extent which never finishes b) Make btrfs_reloc_clone_csum() always fail c) Relocate that block group [CAUSE] run_delalloc_nocow() and cow_file_range() handles error from btrfs_reloc_clone_csum() wrongly: (The ascii chart shows a more generic case of this bug other than the bug mentioned above) |<------------------ delalloc range --------------------------->| | OE 1 | OE 2 | ... | OE n | |<----------- cleanup range --------------->| |<----------- ----------->| \/ btrfs_finish_ordered_io() range So error handler, which calls extent_clear_unlock_delalloc() with EXTENT_DELALLOC and EXTENT_DO_ACCOUNT bits, and btrfs_finish_ordered_io() will both cover OE n, and free its metadata, causing metadata under flow. [Fix] The fix is to ensure after calling btrfs_add_ordered_extent(), we only call error handler after increasing the iteration offset, so that cleanup range won't cover any created ordered extent. |<------------------ delalloc range --------------------------->| | OE 1 | OE 2 | ... | OE n | |<----------- ----------->|<---------- cleanup range --------->| \/ btrfs_finish_ordered_io() range Signed-off-by:
-
- 18 Apr, 2017 32 commits
-
-
Anand Jain authored
The block layer call chain from submit_bio will check if the write cache is enabled for the given queue before submitting the flush. This will add a code to fail fast if its not. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Anand Jain authored
The last consumer of nobarriers is removed by the commit [1] and sync won't fail with EOPNOTSUPP anymore. Thus, now when write cache is write through it just return success without actually transpiring such a request to the block device/lun. [1] commit b25de9d6 block: remove BIO_EOPNOTSUPP And, as the device/lun write cache state may change dynamically saving such as state won't help either. So deleting the member nobarriers. Signed-off-by:
-
Qu Wenruo authored
When scrubbing a RAID5 which has recoverable data corruption (only one data stripe is corrupted), sometimes scrub will report more csum errors than expected. Sometimes even unrecoverable error will be reported. The problem can be easily reproduced by the following steps: 1) Create a btrfs with RAID5 data profile with 3 devs 2) Mount it with nospace_cache or space_cache=v2 To avoid extra data space usage. 3) Create a 128K file and sync the fs, unmount it Now the 128K file lies at the beginning of the data chunk 4) Locate the physical bytenr of data chunk on dev3 Dev3 is the 1st data stripe. 5) Corrupt the first 64K of the data chunk stripe on dev3 6) Mount the fs and scrub it The correct csum error number should be 16 (assuming using x86_64). Larger csum error number can be reported in a 1/3 chance. And unrecoverable error can also be reported in a 1/10 chance. The root cause of the problem is RAID5/6 recover code has race condition, due to the fact that full scrub is initiated per device. While for other mirror based profiles, each mirror is independent with each other, so race won't cause any big problem. For example: Corrupted | Correct | Correct | | Scrub dev3 (D1) | Scrub dev2 (D2) | Scrub dev1(P) | ------------------------------------------------------------------------ Read out D1 |Read out D2 |Read full stripe | Check csum |Check csum |Check parity | Csum mismatch |Csum match, continue |Parity mismatch | handle_errored_block | |handle_errored_block | Read out full stripe | | Read out full stripe| D1 csum error(err++) | | D1 csum error(err++)| Recover D1 | | Recover D1 | So D1's csum error is accounted twice, just because handle_errored_block() doesn't have enough protection, and race can happen. On even worse case, for example D1's recovery code is re-writing D1/D2/P, and P's recovery code is just reading out full stripe, then we can cause unrecoverable error. This patch will use previously introduced lock_full_stripe() and unlock_full_stripe() to protect the whole scrub_handle_errored_block() function for RAID56 recovery. So no extra csum error nor unrecoverable error. Reported-by:Goffredo Baroncelli <kreijack@libero.it> Signed-off-by:
-
Qu Wenruo authored
Unlike mirror based profiles, RAID5/6 recovery needs to read out the whole full stripe. And if we don't do proper protection, it can easily cause race condition. Introduce 2 new functions: lock_full_stripe() and unlock_full_stripe() for RAID5/6. Which store a rb_tree of mutexes for full stripes, so scrub callers can use them to lock a full stripe to avoid race. Signed-off-by:
-
Deepa Dinamani authored
btrfs_root_item maintains the ctime for root updates. This is not part of vfs_inode. Since current_time() uses struct inode* as an argument as Linus suggested, this cannot be used to update root times unless, we modify the signature to use inode. Since btrfs uses nanosecond time granularity, it can also use ktime_get_real_ts directly to obtain timestamp for the root. It is necessary to use the timespec time api here because the same btrfs_set_stack_timespec_*() apis are used for vfs inode times as well. These can be transitioned to using timespec64 when btrfs internally changes to use timespec64 as well. Signed-off-by:
Deepa Dinamani <deepa.kernel@gmail.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Dan Carpenter authored
btrfs_get_extent() never returns NULL pointers, so this code introduces a static checker warning. The btrfs_get_extent() is a bit complex, but trust me that it doesn't return NULLs and also if it did we would trigger the BUG_ON(!em) before the last return statement. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> [ updated subject ] Signed-off-by:
-
Qu Wenruo authored
[BUG] The easist way to reproduce the bug is: ------ # mkfs.btrfs -f $dev -n 16K # mount $dev $mnt -o inode_cache # btrfs quota enable $mnt # btrfs quota rescan -w $mnt # btrfs qgroup show $mnt qgroupid rfer excl -------- ---- ---- 0/5 32.00KiB 32.00KiB ^^ Twice the correct value ------ And fstests/btrfs qgroup test group can easily detect them with inode_cache mount option. Although some of them are false alerts since old test cases are using fixed golden output. While new test cases will use "btrfs check" to detect qgroup mismatch. [CAUSE] Inode_cache mount option will make commit_fs_roots() to call btrfs_save_ino_cache() to update fs/subvol trees, and generate new delayed refs. However we call btrfs_qgroup_prepare_account_extents() too early, before commit_fs_roots(). This makes the "old_roots" for newly generated extents are always NULL. For freeing extent case, this makes both new_roots and old_roots to be empty, while correct old_roots should not be empty. This causing qgroup numbers not decreased correctly. [FIX] Modify the timing of calling btrfs_qgroup_prepare_account_extents() to just before btrfs_qgroup_account_extents(), and add needed delayed_refs handler. So qgroup can handle inode_map mount options correctly. Signed-off-by: -
Anand Jain authored
We have already assigned q from bdev_get_queue() so use it. And rearrange the code for better view. Signed-off-by:
-
Liu Bo authored
This is fixing code pieces where we use div_u64 when passing a u64 divisor. Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
Liu Bo authored
Commit 3d8da678 ("Btrfs: fix divide error upon chunk's stripe_len") changed stripe_len in struct map_lookup to u64, but didn't update stripe_len in struct scrub_parity. This updates the type and switches to div64_u64_rem to match u64 divisor. Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
Liu Bo authored
Now that scrub can fix data errors with the help of parity for raid56 profile, repair during read is able to as well. Although the mirror num in raid56 scenario has different meanings, i.e. 0 or 1: read data directly > 1: do recover with parity, it could be fit into how we repair bad block during read. The trick is to use BTRFS_MAP_READ instead of BTRFS_MAP_WRITE to get the device and position on it. Cc: David Sterba <dsterba@suse.cz> Tested-by:
-
David Sterba authored
There's a helper to clear whole page, with a arch-specific optimized code. The replaced cases do not seem to be in performace critical code, but we still might get some percent gain. Signed-off-by: -
Qu Wenruo authored
scrub_setup_recheck_block() calls btrfs_map_sblock() and then accesses bbio without protection of bio_counter. This can lead to use-after-free if racing with dev replace cancel. Fix it by increasing bio_counter before calling btrfs_map_sblock() and decreasing the bio_counter when corresponding recover is finished. Cc: Liu Bo <bo.li.liu@oracle.com> Reported-by:
-
Qu Wenruo authored
When raid56 dev-replace is cancelled by running scrub, we will free target device without waiting for in-flight bios, causing the following NULL pointer deference or general protection failure. BUG: unable to handle kernel NULL pointer dereference at 00000000000005e0 IP: generic_make_request_checks+0x4d/0x610 CPU: 1 PID: 11676 Comm: kworker/u4:14 Tainted: G O 4.11.0-rc2 #72 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 Workqueue: btrfs-endio-raid56 btrfs_endio_raid56_helper [btrfs] task: ffff88002875b4c0 task.stack: ffffc90001334000 RIP: 0010:generic_make_request_checks+0x4d/0x610 Call Trace: ? generic_make_request+0xc7/0x360 generic_make_request+0x24/0x360 ? generic_make_request+0xc7/0x360 submit_bio+0x64/0x120 ? page_in_rbio+0x4d/0x80 [btrfs] ? rbio_orig_end_io+0x80/0x80 [btrfs] finish_rmw+0x3f4/0x540 [btrfs] validate_rbio_for_rmw+0x36/0x40 [btrfs] raid_rmw_end_io+0x7a/0x90 [btrfs] bio_endio+0x56/0x60 end_workqueue_fn+0x3c/0x40 [btrfs] btrfs_scrubparity_helper+0xef/0x620 [btrfs] btrfs_endio_raid56_helper+0xe/0x10 [btrfs] process_one_work+0x2af/0x720 ? process_one_work+0x22b/0x720 worker_thread+0x4b/0x4f0 kthread+0x10f/0x150 ? process_one_work+0x720/0x720 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x2e/0x40 RIP: generic_make_request_checks+0x4d/0x610 RSP: ffffc90001337bb8 In btrfs_dev_replace_finishing(), we will call btrfs_rm_dev_replace_blocked() to wait bios before destroying the target device when scrub is finished normally. However when dev-replace is aborted, either due to error or cancelled by scrub, we didn't wait for bios, this can lead to use-after-free if there are bios holding the target device. Furthermore, for raid56 scrub, at least 2 places are calling btrfs_map_sblock() without protection of bio_counter, leading to the problem. This patch fixes the problem: 1) Wait for bio_counter before freeing target device when canceling replace 2) When calling btrfs_map_sblock() for raid56, use bio_counter to protect the call. Cc: Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Qu Wenruo authored
In the following situation, scrub will calculate wrong parity to overwrite the correct one: RAID5 full stripe: Before | Dev 1 | Dev 2 | Dev 3 | | Data stripe 1 | Data stripe 2 | Parity Stripe | --------------------------------------------------- 0 | 0x0000 (Bad) | 0xcdcd | 0x0000 | --------------------------------------------------- 4K | 0xcdcd | 0xcdcd | 0x0000 | ... | 0xcdcd | 0xcdcd | 0x0000 | --------------------------------------------------- 64K After scrubbing dev3 only: | Dev 1 | Dev 2 | Dev 3 | | Data stripe 1 | Data stripe 2 | Parity Stripe | --------------------------------------------------- 0 | 0xcdcd (Good) | 0xcdcd | 0xcdcd (Bad) | --------------------------------------------------- 4K | 0xcdcd | 0xcdcd | 0x0000 | ... | 0xcdcd | 0xcdcd | 0x0000 | --------------------------------------------------- 64K The reason is that after raid56 read rebuild rbio->stripe_pages are all correctly recovered (0xcd for data stripes). However when we check and repair parity in scrub_parity_check_and_repair(), we will append pages in sparity->spages list to rbio->bio_pages[], which contains old on-disk data. And when we submit parity data to disk, we calculate parity using rbio->bio_pages[] first, if rbio->bio_pages[] not found, then fallback to rbio->stripe_pages[]. The patch fix it by not appending pages from sparity->spages. So finish_parity_scrub() will use rbio->stripe_pages[] which is correct. Signed-off-by:
-
Qu Wenruo authored
Newly introduced qgroup reserved space trace points are normally nested into several common qgroup operations. While some other trace points are not well placed to co-operate with them, causing confusing output. This patch re-arrange trace_btrfs_qgroup_release_data() and trace_btrfs_qgroup_free_delayed_ref() trace points so they are triggered before reserved space ones. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Qu Wenruo authored
Introduce the following trace points: qgroup_update_reserve qgroup_meta_reserve These trace points are handy to trace qgroup reserve space related problems. Also export btrfs_qgroup structure, as now we directly pass btrfs_qgroup structure to trace points, so that structure needs to be exported. Signed-off-by:
-
David Sterba authored
All callers pass 0 for mirror_num and 1 for need_raid_map. Signed-off-by: -
David Sterba authored
All (1) callers pass the same value. Signed-off-by: -
David Sterba authored
All (1) callers pass the same value. Signed-off-by: -
Liu Bo authored
In raid56 scenario, after trying parity recovery, we didn't set mirror_num for btrfs_bio with failed mirror_num, hence end_bio_extent_readpage() will report a random mirror_num in dmesg log. Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
Liu Bo authored
Scrub repairs data by the unit called scrub_block, which may contain several pages. Scrub always tries to look up a good copy of a whole block, but if there's no such copy, it tries to do repair page by page. If we don't set page's io_error when checking this bad copy, in the last step, we may skip this page when repairing bad copy from good copy. Cc: David Sterba <dsterba@suse.cz> Signed-off-by:
-
David Sterba authored
There are several operations, usually started from ioctls, that cannot run concurrently. The status is tracked in mutually_exclusive_operation_running as an atomic_t. We can easily track the status as one of the per-filesystem flag bits with same synchronization guarantees. The conversion replaces: * atomic_xchg(..., 1) -> test_and_set_bit(FLAG, ...) * atomic_set(..., 0) -> clear_bit(FLAG, ...) Reviewed-by:
-
Goldwyn Rodrigues authored
We are facing the same problem with EDQUOT which was experienced with ENOSPC. Not sure if we require a full ticketing system such as ENOSPC, but here is a quick fix, which may be too big a hammer. Quotas are reserved during the start of an operation, incrementing qg->reserved. However, it is written to disk in a commit_transaction which could take as long as commit_interval. In the meantime there could be deletions which are not accounted for because deletions are accounted for only while committed (free_refroot). So, when we get a EDQUOT flush the data to disk and try again. This fixes fstests btrfs/139. Here is a sample script which shows this issue. DEVICE=/dev/vdb MOUNTPOINT=/mnt TESTVOL=$MOUNTPOINT/tmp QUOTA=5 PROG=btrfs DD_BS="4k" DD_COUNT="256" RUN_TIMES=5000 mkfs.btrfs -f $DEVICE mount -o commit=240 $DEVICE $MOUNTPOINT $PROG subvolume create $TESTVOL $PROG quota enable $TESTVOL $PROG qgroup limit ${QUOTA}G $TESTVOL typeset -i DD_RUN_GOOD typeset -i QUOTA function _check_cmd() { if [[ ${?} > 0 ]]; then echo -n "$(date) E: Running previous command" echo ${*} echo "Without sync" $PROG qgroup show -pcreFf ${TESTVOL} echo "With sync" $PROG qgroup show -pcreFf --sync ${TESTVOL} exit 1 fi } while true; do DD_RUN_GOOD=$RUN_TIMES while (( ${DD_RUN_GOOD} != 0 )); do dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT} _check_cmd "dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT}" DD_RUN_GOOD=(${DD_RUN_GOOD}-1) done $PROG qgroup show -pcref $TESTVOL echo "----------- Cleanup ---------- " rm $TESTVOL/quotatest* done Signed-off-by:Goldwyn Rodrigues <rgoldwyn@suse.com> Reviewed-by:
-
Edmund Nadolski authored
Define the SEQ_LAST macro to replace (u64)-1 in places where said value triggers a special-case ref search behavior. Signed-off-by:
Edmund Nadolski <enadolski@suse.com> Reviewed-by:
-
Edmund Nadolski authored
Replace hardcoded numeric values for __merge_refs 'mode' argument with descriptive constants. Signed-off-by:
-
David Sterba authored
The members have been effectively unused since "Btrfs: rework qgroup accounting" (fcebe456), there's no substitute for assert_qgroups_uptodate so it's removed as well. Reviewed-by:
-
David Sterba authored
The name is misleading and the local variable serves no purpose. Reviewed-by:
-
David Sterba authored
We can read fs_info from dev. Reviewed-by:
-
David Sterba authored
We can read fs_info from dev. Reviewed-by:
-
David Sterba authored
We can read fs_info from eb. Reviewed-by:
-
David Sterba authored
We can preallocate the node so insertion does not have to do that under the lock. The GFP flags for the global radix tree are initialized to GFP_NOFS & ~__GFP_DIRECT_RECLAIM but we can use GFP_KERNEL, because readahead is optional and not on any critical writeout path. Reviewed-by:
-
