- 10 Feb, 2016 13 commits
-
-
Jean-Michel Hautbois authored
Use the helper to enumerate and set DV timings instead of a custom code. This will ease debugging too, as it is consistent with other drivers. Signed-off-by:
Jean-Michel Hautbois <jean-michel.hautbois@veo-labs.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Amitoj Kaur Chawla authored
Remove an unnecassary cast in the argument to kfree. Found using Coccinelle. The semantic patch used to find this is as follows: //<smpl> @@ type T; expression *f; @@ - kfree((T *)(f)); + kfree(f); //</smpl> Signed-off-by:
Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Auto-gain and auto-exposure clusters in the ov9650 driver have both a size of 2, not 3 controls. Fix this. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of having lots of #ifdefs inside au0828-core due to V4L2, move the dependencies to au0828-video.c. That allows removing all those ifdefs, as au0828-video is only compiled if CONFIG_VIDEO_AU0828_V4L2. This fixes the following warnings reported by Kbuild test with a random config with au0828 enabled, but V4L2 is disabled. All warnings (new ones prefixed by >>): drivers/media/usb/au0828/au0828-core.c: In function 'au0828_usb_probe': >> drivers/media/usb/au0828/au0828-core.c:463:1: warning: label 'done' defined but not used [-Wunused-label] done: ^ drivers/media/usb/au0828/au0828-core.c: At top level: drivers/media/usb/au0828/au0828-core.c:250:12: warning: 'au0828_create_media_graph' defined but not used [-Wunused-function] static int au0828_create_media_graph(struct au0828_dev *dev) ^ Tested with a WinTV HVR 950Q (USB ID: 2040:7200) Signed-off-by: -
Mauro Carvalho Chehab authored
It doesn't make sense to try to create the analog TV graph, if the device fails to register at V4L2, or if it doesn't have V4L2 support. Thanks to Shuah for pointing this issue. Reported-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Register saa7134 at the media controller core and provide support for both analog TV and DVB. Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of copyping the same code on all PCI devices that would have a media controller, add a core ancillary routine. Signed-off-by: -
Mauro Carvalho Chehab authored
The saa7134_input.tv field was used to indicate if an input had a RF signal for TV input. This is not needed anymore, as the input type can be checked directly by the driver. Also, due to a past bug when setting the TV standard at the demod, all inputs should have this field set, with is wrong. This reduces the size of the saa7134_boards by about 8KB, on i386 (and probably twice on 64 bits), with is a nice colateral effect: text data bss dec hex filename 241047 136831 66356 444234 6c74a drivers/media/pci/saa7134/saa7134.o.old 240851 128895 66292 436038 6a746 drivers/media/pci/saa7134/saa7134.o Signed-off-by: -
Mauro Carvalho Chehab authored
It doesn't make any sense to only update the TV standard for TV, as composite and S-Video inputs also need it. Signed-off-by: -
Mauro Carvalho Chehab authored
Currently, the saa7134 driver is hardcoding input names on each board entry. More modern drivers define, instead, an enum for each input type. While the current logic works, it adds extra complexity at the driver, as it needs to discover the type of the input using some euristics. Instead, let's standardize the input types and use a type, instead of a name on all places. That will allow further patches to properly report the input type via VIDIOC_G_INPUT and to remove an extra field from the struct to identify if the input is for TV. Please notice that several boards define an input for receiving composite signals via a S-Video connector. The name of such input was inconsistent, so this patch cleans it and make it to be properly reported the same way for all boards. Signed-off-by: -
Mauro Carvalho Chehab authored
Allow devices to pass an optional argument to register the DVB driver at the media controller. Signed-off-by: -
Mauro Carvalho Chehab authored
Now that the core has a function to create the media graph, we can get rid of the specialized code at em28xx. Signed-off-by: -
Mauro Carvalho Chehab authored
The em28xx_v4l2_create_media_graph() is almost generic enough to be at the core, as an ancillary function. Make it even more generic, by getting rid of em28xx-specific code, relying only at the media_device, in order to discover all entities found on PC-customer's hardware and add it at the V4L2 core. Signed-off-by:
-
- 09 Feb, 2016 1 commit
-
-
Mauro Carvalho Chehab authored
Linux 4.5-rc3 * tag 'v4.5-rc3': (644 commits) Linux 4.5-rc3 epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT radix-tree: fix oops after radix_tree_iter_retry MAINTAINERS: trim the file triggers for ABI/API dax: dirty inode only if required thp: make deferred_split_scan() work again mm: replace vma_lock_anon_vma with anon_vma_lock_read/write ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup um: asm/page.h: remove the pte_high member from struct pte_t mm, hugetlb: don't require CMA for runtime gigantic pages mm/hugetlb: fix gigantic page initialization/allocation mm: downgrade VM_BUG in isolate_lru_page() to warning mempolicy: do not try to queue pages from !vma_migratable() mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress vmstat: make vmstat_update deferrable mm, vmstat: make quiet_vmstat lighter mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT memblock: don't mark memblock_phys_mem_size() as __init dump_stack: avoid potential deadlocks mm: validate_mm browse_rb SMP race condition ...
-
- 07 Feb, 2016 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "The first real batch of fixes for this release cycle, so there are a few more than usual. Most of these are fixes and tweaks to board support (DT bugfixes, etc). I've also picked up a couple of small cleanups that seemed innocent enough that there was little reason to wait (const/ __initconst and Kconfig deps). Quite a bit of the changes on OMAP were due to fixes to no longer write to rodata from assembly when ARM_KERNMEM_PERMS was enabled, but there were also other fixes. Kirkwood had a bunch of gpio fixes for some boards. OMAP had RTC fixes on OMAP5, and Nomadik had changes to MMC parameters in DT. All in all, mostly the usual mix of various fixes" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: multi_v7_defconfig: enable DW_WATCHDOG ARM: nomadik: fix up SD/MMC DT settings ARM64: tegra: Add chosen node for tegra132 norrin ARM: realview: use "depends on" instead of "if" after prompt ARM: tango: use "depends on" instead of "if" after prompt ARM: tango: use const and __initconst for smp_operations ARM: realview: use const and __initconst for smp_operations bus: uniphier-system-bus: revive tristate prompt arm64: dts: Add missing DMA Abort interrupt to Juno bus: vexpress-config: Add missing of_node_put ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2 ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address ARM: dts: LogicPD Torpedo: Revert Duplicative Entries ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types ARM: dts: am4372: fix irq type for arm twd and global timer ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type ...
-
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox fixes from Jassi Brar: - fix getting element from the pcc-channels array by simply indexing into it - prevent building mailbox-test driver for archs that don't have IOMEM * 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Fix dependencies for !HAS_IOMEM archs mailbox: pcc: fix channel calculation in get_pcc_channel()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some USB fixes for 4.5-rc3. The usual, xhci fixes for reported issues, combined with some small gadget driver fixes, and a MAINTAINERS file update. All have been in linux-next with no reported issues" * tag 'usb-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: harden xhci_find_next_ext_cap against device removal xhci: Fix list corruption in urb dequeue at host removal usb: host: xhci-plat: fix NULL pointer in probe for device tree case usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TT usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms usb: xhci: set SSIC port unused only if xhci_suspend succeeds usb: xhci: add a quirk bit for ssic port unused usb: xhci: handle both SSIC ports in PME stuck quirk usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver. Revert "xhci: don't finish a TD if we get a short-transfer event mid TD" MAINTAINERS: fix my email address usb: dwc2: Fix probe problem on bcm2835 Revert "usb: dwc2: Move reset into dwc2_get_hwparams()" usb: musb: ux500: Fix NULL pointer dereference at system PM usb: phy: mxs: declare variable with initialized value usb: phy: msm: fix error handling in probe.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging and IIO driver fixes from Greg KH: "Here are some IIO and staging driver fixes for 4.5-rc3. All of them, except one, are for IIO drivers, and one is for a speakup driver fix caused by some earlier patches, to resolve a reported build failure" * tag 'staging-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Staging: speakup: Fix allyesconfig build on mn10300 iio: dht11: Use boottime iio: ade7753: avoid uninitialized data iio: pressure: mpl115: fix temperature offset sign iio: imu: Fix dependencies for !HAS_IOMEM archs staging: iio: Fix dependencies for !HAS_IOMEM archs iio: adc: Fix dependencies for !HAS_IOMEM archs iio: inkern: fix a NULL dereference on error iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer. iio: light: acpi-als: Report data as processed iio: dac: mcp4725: set iio name property in sysfs iio: add HAS_IOMEM dependency to VF610_ADC iio: add IIO_TRIGGER dependency to STK8BA50 iio: proximity: lidar: correct return value iio-light: Use a signed return type for ltr501_match_samp_freq()
-
- 06 Feb, 2016 21 commits
-
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "22 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits) epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT radix-tree: fix oops after radix_tree_iter_retry MAINTAINERS: trim the file triggers for ABI/API dax: dirty inode only if required thp: make deferred_split_scan() work again mm: replace vma_lock_anon_vma with anon_vma_lock_read/write ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup um: asm/page.h: remove the pte_high member from struct pte_t mm, hugetlb: don't require CMA for runtime gigantic pages mm/hugetlb: fix gigantic page initialization/allocation mm: downgrade VM_BUG in isolate_lru_page() to warning mempolicy: do not try to queue pages from !vma_migratable() mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress vmstat: make vmstat_update deferrable mm, vmstat: make quiet_vmstat lighter mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT memblock: don't mark memblock_phys_mem_size() as __init dump_stack: avoid potential deadlocks mm: validate_mm browse_rb SMP race condition m32r: fix build failure due to SMP and MMU ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph fixes from Sage Weil: "We have a few wire protocol compatibility fixes, ports of a few recent CRUSH mapping changes, and a couple error path fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: MOSDOpReply v7 encoding libceph: advertise support for TUNABLES5 crush: decode and initialize chooseleaf_stable crush: add chooseleaf_stable tunable crush: ensure take bucket value is valid crush: ensure bucket id is valid before indexing buckets array ceph: fix snap context leak in error path ceph: checking for IS_ERR instead of NULL
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Fixes all over the place: - amdkfd: two static checker fixes - mst: a bunch of static checker and spec/hw interaction fixes - amdgpu: fix Iceland hw properly, and some fiji bugs, along with some write-combining fixes. - exynos: some regression fixes - adv7511: fix some EDID reading issues" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (38 commits) drm/dp/mst: deallocate payload on port destruction drm/dp/mst: Reverse order of MST enable and clearing VC payload table. drm/dp/mst: move GUID storage from mgr, port to only mst branch drm/dp/mst: change MST detection scheme drm/dp/mst: Calculate MST PBN with 31.32 fixed point drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil drm/mst: Add range check for max_payloads during init drm/mst: Don't ignore the MST PBN self-test result drm: fix missing reference counting decrease drm/amdgpu: disable uvd and vce clockgating on Fiji drm/amdgpu: remove exp hardware support from iceland drm/amdgpu: load MEC ucode manually on iceland drm/amdgpu: don't load MEC2 on topaz drm/amdgpu: drop topaz support from gmc8 module drm/amdgpu: pull topaz gmc bits into gmc_v7 drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above drm/amdgpu: iceland use CI based MC IP drm/amdgpu: move gmc7 support out of CIK dependency drm/amdgpu/gfx7: enable cp inst/reg error interrupts drm/amdgpu/gfx8: enable cp inst/reg error interrupts ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management and ACPI fixes from Rafael Wysocki: "These are: a fix for a recently introduced false-positive warnings about PM domain pointers being changed inappropriately (harmless but annoying), an MCH size workaround quirk for one more platform, a compiler warning fix (generic power domains framework), an ACPI LPSS (Intel SoCs) driver fixup and a cleanup of the ACPI CPPC core code. Specifics: - PM core fix to avoid false-positive warnings generated when the pm_domain field is cleared for a device that appears to be bound to a driver (Rafael Wysocki). - New MCH size workaround quirk for Intel Haswell-ULT (Josh Boyer). - Fix for an "unused function" compiler warning in the generic power domains framework (Ulf Hansson). - Fixup for the ACPI driver for Intel SoCs (acpi-lpss) to set the PM domain pointer of a device properly in one place that was overlooked by a recent PM core update (Andy Shevchenko). - Removal of a redundant function declaration in the ACPI CPPC core code (Timur Tabi)" * tag 'pm+acpi-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: Avoid false-positive warnings in dev_pm_domain_set() PM / Domains: Silence compiler warning for an unused function ACPI / CPPC: remove redundant mbox_send_message() declaration ACPI / LPSS: set PM domain via helper setter PNP: Add Haswell-ULT to Intel MCH size workaround -
Jason Baron authored
In the current implementation of the EPOLLEXCLUSIVE flag (added for 4.5-rc1), if epoll waiters create different POLL* sets and register them as exclusive against the same target fd, the current implementation will stop waking any further waiters once it finds the first idle waiter. This means that waiters could miss wakeups in certain cases. For example, when we wake up a pipe for reading we do: wake_up_interruptible_sync_poll(&pipe->wait, POLLIN | POLLRDNORM); So if one epoll set or epfd is added to pipe p with POLLIN and a second set epfd2 is added to pipe p with POLLRDNORM, only epfd may receive the wakeup since the current implementation will stop after it finds any intersection of events with a waiter that is blocked in epoll_wait(). We could potentially address this by requiring all epoll waiters that are added to p be required to pass the same set of POLL* events. IE the first EPOLL_CTL_ADD that passes EPOLLEXCLUSIVE establishes the set POLL* flags to be used by any other epfds that are added as EPOLLEXCLUSIVE. However, I think it might be somewhat confusing interface as we would have to reference count the number of users for that set, and so userspace would have to keep track of that count, or we would need a more involved interface. It also adds some shared state that we'd have store somewhere. I don't think anybody will want to bloat __wait_queue_head for this. I think what we could do instead, is to simply restrict EPOLLEXCLUSIVE such that it can only be specified with EPOLLIN and/or EPOLLOUT. So that way if the wakeup includes 'POLLIN' and not 'POLLOUT', we can stop once we hit the first idle waiter that specifies the EPOLLIN bit, since any remaining waiters that only have 'POLLOUT' set wouldn't need to be woken. Likewise, we can do the same thing if 'POLLOUT' is in the wakeup bit set and not 'POLLIN'. If both 'POLLOUT' and 'POLLIN' are set in the wake bit set (there is at least one example of this I saw in fs/pipe.c), then we just wake the entire exclusive list. Having both 'POLLOUT' and 'POLLIN' both set should not be on any performance critical path, so I think that's ok (in fs/pipe.c its in pipe_release()). We also continue to include EPOLLERR and EPOLLHUP by default in any exclusive set. Thus, the user can specify EPOLLERR and/or EPOLLHUP but is not required to do so. Since epoll waiters may be interested in other events as well besides EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP, these can still be added by doing a 'dup' call on the target fd and adding that as one normally would with EPOLL_CTL_ADD. Since I think that the POLLIN and POLLOUT events are what we are interest in balancing, I think that the 'dup' thing could perhaps be added to only one of the waiter threads. However, I think that EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP should be sufficient for the majority of use-cases. Since EPOLLEXCLUSIVE is intended to be used with a target fd shared among multiple epfds, where between 1 and n of the epfds may receive an event, it does not satisfy the semantics of EPOLLONESHOT where only 1 epfd would get an event. Thus, it is not allowed to be specified in conjunction with EPOLLEXCLUSIVE. EPOLL_CTL_MOD is also not allowed if the fd was previously added as EPOLLEXCLUSIVE. It seems with the limited number of flags to not be as interesting, but this could be relaxed at some further point. Signed-off-by:
Jason Baron <jbaron@akamai.com> Tested-by:
Madars Vitolins <m@silodev.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Eric Wong <normalperson@yhbt.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Konstantin Khlebnikov authored
Helper radix_tree_iter_retry() resets next_index to the current index. In following radix_tree_next_slot current chunk size becomes zero. This isn't checked and it tries to dereference null pointer in slot. Tagged iterator is fine because retry happens only at slot 0 where tag bitmask in iter->tags is filled with single bit. Fixes: 46437f9a ("radix-tree: fix race in gang lookup") Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Michael Kerrisk (man-pages) authored
Commit ea8f8fc8 ("MAINTAINERS: add linux-api for review of API/ABI changes") added file triggers for various paths that likely indicated API/ABI changes. However, catching all changes in Documentation/ABI/ and include/uapi/ produces a large volume of mail to linux-api, rather than only API/ABI changes. Drop those two entries, but leave include/linux/syscalls.h and kernel/sys_ni.c to catch syscall-related changes. [josh@joshtriplett.org: redid changelog] Signed-off-by:
Michael Kerrisk <mtk.man-pages@gmail.com> Acked-by:
-
Dmitry Monakhov authored
Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by:
-
Kirill A. Shutemov authored
We need to iterate over split_queue, not local empty list to get anything split from the shrinker. Fixes: e3ae1953 ("thp: limit number of object to scan on deferred_split_scan()") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Konstantin Khlebnikov authored
Sequence vma_lock_anon_vma() - vma_unlock_anon_vma() isn't safe if anon_vma appeared between lock and unlock. We have to check anon_vma first or call anon_vma_prepare() to be sure that it's here. There are only few users of these legacy helpers. Let's get rid of them. This patch fixes anon_vma lock imbalance in validate_mm(). Write lock isn't required here, read lock is enough. And reorders expand_downwards/expand_upwards: security_mmap_addr() and wrapping-around check don't have to be under anon vma lock. Link: https://lkml.kernel.org/r/CACT4Y+Y908EjM2z=706dv4rV6dWtxTLK9nFg9_7DhRMLppBo2g@mail.gmail.comSigned-off-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
-
xuejiufei authored
When recovery master down, dlm_do_local_recovery_cleanup() only remove the $RECOVERY lock owned by dead node, but do not clear the refmap bit. Which will make umount thread falling in dead loop migrating $RECOVERY to the dead node. Signed-off-by:
xuejiufei <xuejiufei@huawei.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Nicolai Stange authored
Commit 16da3068 ("um: kill pfn_t") introduced a compile warning for defconfig (SUBARCH=i386): arch/um/kernel/skas/mmu.c:38:206: warning: right shift count >= width of type [-Wshift-count-overflow] Aforementioned patch changes the definition of the phys_to_pfn() macro from ((pfn_t) ((p) >> PAGE_SHIFT)) to ((p) >> PAGE_SHIFT) This effectively changes the phys_to_pfn() expansion's type from unsigned long long to unsigned long. Through the callchain init_stub_pte() => mk_pte(), the expansion of phys_to_pfn() is (indirectly) fed into the 'phys' argument of the pte_set_val(pte, phys, prot) macro, eventually leading to (pte).pte_high = (phys) >> 32; This results in the warning from above. Since UML only deals with 32 bit addresses, the upper 32 bits from 'phys' used to be always zero anyway. Also, all page protection flags defined by UML don't use any bits beyond bit 9. Since the contents of a PTE are defined within architecture scope only, the ->pte_high member can be safely removed. Remove the ->pte_high member from struct pte_t. Rename ->pte_low to ->pte. Adapt the pte helper macros in arch/um/include/asm/page.h. Noteworthy is the pte_copy() macro where a smp_wmb() gets dropped. This write barrier doesn't seem to be paired with any read barrier though and thus, was useless anyway. Fixes: 16da3068 ("um: kill pfn_t") Signed-off-by:
Nicolai Stange <nicstange@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Richard Weinberger <richard@nod.at> Cc: Nicolai Stange <nicstange@gmail.com> Signed-off-by:
-
Vlastimil Babka authored
Commit 944d9fec ("hugetlb: add support for gigantic page allocation at runtime") has added the runtime gigantic page allocation via alloc_contig_range(), making this support available only when CONFIG_CMA is enabled. Because it doesn't depend on MIGRATE_CMA pageblocks and the associated infrastructure, it is possible with few simple adjustments to require only CONFIG_MEMORY_ISOLATION instead of full CONFIG_CMA. After this patch, alloc_contig_range() and related functions are available and used for gigantic pages with just CONFIG_MEMORY_ISOLATION enabled. Note CONFIG_CMA selects CONFIG_MEMORY_ISOLATION. This allows supporting runtime gigantic pages without the CMA-specific checks in page allocator fastpaths. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
-
Mike Kravetz authored
Attempting to preallocate 1G gigantic huge pages at boot time with "hugepagesz=1G hugepages=1" on the kernel command line will prevent booting with the following: kernel BUG at mm/hugetlb.c:1218! When mapcount accounting was reworked, the setting of compound_mapcount_ptr in prep_compound_gigantic_page was overlooked. As a result, the validation of mapcount in free_huge_page fails. The "BUG_ON" checks in free_huge_page were also changed to "VM_BUG_ON_PAGE" to assist with debugging. Fixes: 53f9263b ("mm: rework mapcount accounting to enable 4k mapping of THPs") Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by:
David Rientjes <rientjes@google.com> Tested-by:
-
Kirill A. Shutemov authored
Calling isolate_lru_page() is wrong and shouldn't happen, but it not nessesary fatal: the page just will not be isolated if it's not on LRU. Let's downgrade the VM_BUG_ON_PAGE() to WARN_RATELIMIT(). Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Kirill A. Shutemov authored
Maybe I miss some point, but I don't see a reason why we try to queue pages from non migratable VMAs. This testcase steps on VM_BUG_ON_PAGE() in isolate_lru_page(): #include <fcntl.h> #include <unistd.h> #include <stdio.h> #include <sys/mman.h> #include <numaif.h> #define SIZE 0x2000 int foo; int main() { int fd; char *p; unsigned long mask = 2; fd = open("/dev/sg0", O_RDWR); p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); /* Faultin pages */ foo = p[0] + p[0x1000]; mbind(p, SIZE, MPOL_BIND, &mask, 4, MPOL_MF_MOVE | MPOL_MF_STRICT); return 0; } The only case when we can queue pages from such VMA is MPOL_MF_STRICT plus MPOL_MF_MOVE or MPOL_MF_MOVE_ALL for VMA which has pages on LRU, but gfp mask is not sutable for migaration (see mapping_gfp_mask() check in vma_migratable()). That's looks like a bug to me. Let's filter out non-migratable vma at start of queue_pages_test_walk() and go to queue_pages_pte_range() only if MPOL_MF_MOVE or MPOL_MF_MOVE_ALL flag is set. Signed-off-by: -
Tetsuo Handa authored
Jan Stancek has reported that system occasionally hanging after "oom01" testcase from LTP triggers OOM. Guessing from a result that there is a kworker thread doing memory allocation and the values between "Node 0 Normal free:" and "Node 0 Normal:" differs when hanging, vmstat is not up-to-date for some reason. According to commit 373ccbe5 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress"), it meant to force the kworker thread to take a short sleep, but it by error used schedule_timeout(1). We missed that schedule_timeout() in state TASK_RUNNING doesn't do anything. Fix it by using schedule_timeout_uninterruptible(1) which forces the kworker thread to take a short sleep in order to make sure that vmstat is up-to-date. Fixes: 373ccbe5 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress") Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
Jan Stancek <jstancek@redhat.com> Acked-by:
-
Michal Hocko authored
Commit 0eb77e98 ("vmstat: make vmstat_updater deferrable again and shut down on idle") made vmstat_shepherd deferrable. vmstat_update itself is still useing standard timer which might interrupt idle task. This is possible because "mm, vmstat: make quiet_vmstat lighter" removed cancel_delayed_work from the quiet_vmstat. Change vmstat_work to use DEFERRABLE_WORK to prevent from pointless wakeups from the idle context. Acked-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
-
Michal Hocko authored
Mike has reported a considerable overhead of refresh_cpu_vm_stats from the idle entry during pipe test: 12.89% [kernel] [k] refresh_cpu_vm_stats.isra.12 4.75% [kernel] [k] __schedule 4.70% [kernel] [k] mutex_unlock 3.14% [kernel] [k] __switch_to This is caused by commit 0eb77e98 ("vmstat: make vmstat_updater deferrable again and shut down on idle") which has placed quiet_vmstat into cpu_idle_loop. The main reason here seems to be that the idle entry has to get over all zones and perform atomic operations for each vmstat entry even though there might be no per cpu diffs. This is a pointless overhead for _each_ idle entry. Make sure that quiet_vmstat is as light as possible. First of all it doesn't make any sense to do any local sync if the current cpu is already set in oncpu_stat_off because vmstat_update puts itself there only if there is nothing to do. Then we can check need_update which should be a cheap way to check for potential per-cpu diffs and only then do refresh_cpu_vm_stats. The original patch also did cancel_delayed_work which we are not doing here. There are two reasons for that. Firstly cancel_delayed_work from idle context will blow up on RT kernels (reported by Mike): CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.5.0-rt3 #7 Hardware name: MEDION MS-7848/MS-7848, BIOS M7848W08.20C 09/23/2013 Call Trace: dump_stack+0x49/0x67 ___might_sleep+0xf5/0x180 rt_spin_lock+0x20/0x50 try_to_grab_pending+0x69/0x240 cancel_delayed_work+0x26/0xe0 quiet_vmstat+0x75/0xa0 cpu_idle_loop+0x38/0x3e0 cpu_startup_entry+0x13/0x20 start_secondary+0x114/0x140 And secondly, even on !RT kernels it might add some non trivial overhead which is not necessary. Even if the vmstat worker wakes up and preempts idle then it will be most likely a single shot noop because the stats were already synced and so it would end up on the oncpu_stat_off anyway. We just need to teach both vmstat_shepherd and vmstat_update to stop scheduling the worker if there is nothing to do. [mgalbraith@suse.de: cancel pending work of the cpu_stat_off CPU] Signed-off-by:Mike Galbraith <umgwanakikbuti@gmail.com> Acked-by:
Mike Galbraith <mgalbraith@suse.de> Signed-off-by:
-
Vlastimil Babka authored
The description mentions kswapd threads, while the deferred struct page initialization is actually done by one-off "pgdatinitX" threads. Fix the description so that potentially users are not confused about pgdatinit threads using CPU after boot instead of kswapd. Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
David Gibson authored
At the moment memblock_phys_mem_size() is marked as __init, and so is discarded after boot. This is different from most of the memblock functions which are marked __init_memblock, and are only discarded after boot if memory hotplug is not configured. To allow for upcoming code which will need memblock_phys_mem_size() in the hotplug path, change it from __init to __init_memblock. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
