- 29 Sep, 2020 40 commits
-
-
Sebastian Andrzej Siewior authored
The usage of in_interrupt) in driver code is phased out. The iwlwifi_dbg tracepoint records in_interrupt() seperately, but that's superfluous because the trace header already records all kind of state and context information like hardirq status, softirq status, preemption count etc. Aside of that the recording of in_interrupt() as boolean does not allow to distinguish between the possible contexts (hard interrupt, soft interrupt, bottom half disabled) while the trace header gives precise information. Remove the duplicate information from the tracepoint and fixup the caller. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Luca Coelho <luca@coelho.fi> Acked-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sebastian Andrzej Siewior authored
The usage of in_interrupt() in non-core code is phased out. The debugging macros in these drivers use in_interrupt() to print 'I' or 'U' depending on the return value of in_interrupt(). While 'U' is confusing at best and 'I' is not really describing the actual context (hard interupt, soft interrupt, bottom half disabled section) these debug macros originate from the pre ftrace kernel era and their value today is questionable. They probably should be removed completely. The macros weere added initially for ipw2100 and then spreaded when the driver was forked. Remove the in_interrupt() usage at least.. Signed-off-by:
-
Sebastian Andrzej Siewior authored
The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be seperated or the context be conveyed in an argument passed by the caller, which usually knows the context. brcmf_fweh_process_event() uses in_interrupt() to select the allocation mode GFP_KERNEL/GFP_ATOMIC. Aside of the above reasons this check is incomplete as it cannot detect contexts which just have preemption or interrupts disabled. All callchains leading to brcmf_fweh_process_event() can clearly identify the calling context. Convey a 'gfp' argument through the callchains and let the callers hand in the appropriate GFP mode. This has also the advantage that any change of execution context or preemption/interrupt state in these callchains will be detected by the memory allocator for all GFP_KERNEL allocations. Signed-off-by:
-
Thomas Gleixner authored
bcrmgf_netif_rx() uses in_interrupt to chose between netif_rx() and netif_rx_ni(). in_interrupt() usage in drivers is phased out. Convey the execution mode via an 'inirq' argument through the various callchains leading to brcmf_netif_rx(): brcmf_pcie_isr_thread() <- Task context brcmf_proto_msgbuf_rx_trigger() brcmf_msgbuf_process_rx() brcmf_msgbuf_process_msgtype() brcmf_msgbuf_process_rx_complete() brcmf_netif_mon_rx() brcmf_netif_rx(isirq = false) brcmf_netif_rx(isirq = false) brcmf_sdio_readframes() <- Task context sdio_claim_host() might sleep brcmf_rx_frame(isirq = false) brcmf_sdio_rxglom() <- Task context sdio_claim_host() might sleep brcmf_rx_frame(isirq = false) brcmf_usb_rx_complete() <- Interrupt context brcmf_rx_frame(isirq = true) brcmf_rx_frame() brcmf_proto_rxreorder() brcmf_proto_bcdc_rxreorder() brcmf_fws_rxreorder() brcmf_netif_rx() brcmf_netif_rx() Signed-off-by: -
Sebastian Andrzej Siewior authored
brcmf_sdio_isr() is using in_interrupt() to distinguish if it is called from a interrupt service routine or from a worker thread. Passing such information from the calling context is preferred and requested by Linus, so add an argument `in_isr' to brcmf_sdio_isr() and let the callers pass the information about the calling context. Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Acked-by:
-
Sebastian Andrzej Siewior authored
lmc_trace() was first introduced in commit e7a392d5 ("Import 2.3.99pre6-5") and was not touched ever since. The reason for looking at this was to get rid of the in_interrupt() usage, but while looking at it the following observations were made: - At least lmc_get_stats() (->ndo_get_stats()) is invoked with disabled preemption which is not detected by the in_interrupt() check, which would cause schedule() to be called from invalid context. - The code is hidden behind #ifdef LMC_TRACE which is not defined within the kernel and wasn't at the time it was introduced. - Three jiffies don't match 50ms. msleep() would be a better match which would also avoid the schedule() invocation. But why have it to begin with? - Nobody would do something like this today. Either netdev_dbg() or trace_printk() or a trace event would be used. If only the functions related to this driver are interesting then ftrace can be used with filtering. As it is obviously broken for years, simply remove it. Signed-off-by:
-
Sebastian Andrzej Siewior authored
The comment above nc_vendor_write() suggests that the function could become async so that is usable in `in_interrupt()' context or that it already is safe to be called from such a context. Eitherway: The function did not become async since v2.4.9.2 (2002) and it must be not be called from `in_interrupt()' context because it sleeps on mutltiple occations. Remove the misleading comment. Signed-off-by:
-
Sebastian Andrzej Siewior authored
kaweth_async_set_rx_mode() invokes kaweth_contol() and has two callers: - kaweth_open() which is invoked from preemptible context . - kaweth_start_xmit() which holds a spinlock and has bottom halfs disabled. If called from kaweth_start_xmit() kaweth_async_set_rx_mode() obviously cannot block, which means it can't call kaweth_control(). This is detected with an in_interrupt() check. Replace the in_interrupt() check in kaweth_async_set_rx_mode() with an argument which is set true by the caller if the context is safe to sleep, otherwise false. Now kaweth_control() is only called from preemptible context which means there is no need for GFP_ATOMIC allocations anymore. Replace it with usb_control_msg(). Cleanup the code a bit while at it. Finally remove kaweth_control() since the last user is gone. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Sebastian Andrzej Siewior authored
kaweth_control() is almost the same as usb_control_msg() except for the memory allocation mode (GFP_ATOMIC vs GFP_NOIO) and the in_interrupt() check. All the invocations of kaweth_control() are within the probe function in fully preemtible context so there is no reason to use atomic allocations, GFP_NOIO which is used by usb_control_msg() is perfectly fine. Replace kaweth_control() invocations from probe with usb_control_msg(). Signed-off-by:
-
Sebastian Andrzej Siewior authored
in_interrupt() is ill defined and does not provide what the name suggests. The usage especially in driver code is deprecated and a tree wide effort to clean up and consolidate the (ab)usage of in_interrupt() and related checks is happening. handle_regs_int() is always invoked as part of URB callback which is either invoked from hard or soft interrupt context. Remove the magic assertion. Signed-off-by:
-
Sebastian Andrzej Siewior authored
vxge_os_dma_malloc() and vxge_os_dma_malloc_async() are both called from callchains which use GFP_KERNEL allocations unconditionally or have other requirements to be called from fully preemptible task context.. vxge_os_dma_malloc(): 1) __vxge_hw_blockpool_create() <- GFP_KERNEL 2) __vxge_hw_mempool_grow() <- vzalloc() __vxge_hw_blockpool_malloc() vxge_os_dma_malloc_async(): 1 __vxge_hw_mempool_grow() <- vzalloc() __vxge_hw_blockpool_malloc() __vxge_hw_blockpool_blocks_add() 2) vxge_hw_vpath_open() <- vzalloc() __vxge_hw_blockpool_block_allocate() That means neither of these functions needs a conditional allocation mode. Remove the in_interrupt() conditional and use GFP_KERNEL. Signed-off-by: -
Sebastian Andrzej Siewior authored
lance_interrupt() contains two pointless checks: - A check whether the 'dev_id' argument is NULL. 'dev_id' is the pointer which was handed in to request_irq() and the interrupt handler will always be invoked with that pointer as 'dev_id' argument by the core code. - A check for interrupt reentrancy. The core code already guarantees non-reentrancy of interrupt handlers. Remove these check. Signed-off-by:
-
Sebastian Andrzej Siewior authored
bigmac_init_rings() has an argument signaling if it is called from the interrupt handler. This is used to decide between GFP_KERNEL and GFP_ATOMIC for memory allocations. But it also checks in_interrupt() to handle invocations which come from the timer callback bigmac_timer() via bigmac_hw_init(), which is invoked with 'in_irq = 0'. While the timer callback is clearly not in hard interrupt context it is still not sleepable context. Rename the argument to `non_blocking' and set it to true if invoked from the timer callback or the interrupt handler which allows to remove the in_interrupt() check and makes the code consistent. Signed-off-by:
-
Sebastian Andrzej Siewior authored
efx_ef10_try_update_nic_stats_vf() is now only invoked from thread context and can sleep after efx::stats_lock is dropped. Change the allocation mode from GFP_ATOMIC to GFP_KERNEL. Signed-off-by:
-
Edward Cree authored
efx_ef10_try_update_nic_stats_vf() used in_interrupt() to figure out whether it is safe to sleep (for MCDI) or not. The only caller from which it was not is efx_net_stats(), which can be invoked under dev_base_lock from net-sysfs::netstat_show(). So add a new update_stats_atomic() method to struct efx_nic_type, and call it from efx_net_stats(), removing the need for efx_ef10_try_update_nic_stats_vf() to behave differently for this case (which it wasn't doing correctly anyway). For all nic_types other than EF10 VF, this method is NULL so the the regular update_stats() methods are invoked , which are happy with being called from atomic contexts. Fixes: f00bf230 ("sfc: don't update stats on VF when called in atomic context") Reported-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
Martin Habets <mhabets@solarflare.com> Signed-off-by:
-
Thomas Gleixner authored
The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be seperated or the context be conveyed in an argument passed by the caller, which usually knows the context. sonic_quiesce() uses 'in_interrupt() || irqs_disabled()' to chose either udelay() or usleep_range() in the wait loop. In all callchains leading to it the context is well defined and known. Add a 'may_sleep' argument and pass it through the various callchains leading to this function. Signed-off-by:
-
Sebastian Andrzej Siewior authored
in_interrupt() is ill defined and does not provide what the name suggests. The usage especially in driver code is deprecated and a tree wide effort to clean up and consolidate the (ab)usage of in_interrupt() and related checks is happening. In this case the check covers only parts of the contexts in which these functions cannot be called. It fails to detect preemption or interrupt disabled invocations. As the functions which contain these warnings invoke mutex_lock() which contains a broad variety of checks (always enabled or debug option dependent) and therefore covers all invalid conditions already, there is no point in having inconsistent warnings in those drivers. The conditional return is not really valuable in practice either. Just remove them. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Sebastian Andrzej Siewior authored
in_interrupt() is ill defined and does not provide what the name suggests. The usage especially in driver code is deprecated and a tree wide effort to clean up and consolidate the (ab)usage of in_interrupt() and related checks is happening. In this case the check covers only parts of the contexts in which these functions cannot be called. It fails to detect preemption or interrupt disabled invocations. As the functions which are invoked from ionic_adminq_post() and ionic_dev_cmd_wait() contain a broad variety of checks (always enabled or debug option dependent) which cover all invalid conditions already, there is no point in having inconsistent warnings in those drivers. Just remove them. Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Sebastian Andrzej Siewior authored
The in_interrupt() usage in this driver tries to figure out which context may sleep and which context may not sleep. in_interrupt() is not really suitable as it misses both preemption disabled and interrupt disabled invocations from task context. Conditionals like that in driver code are frowned upon in general because invocations of functions from invalid contexts might not be detected as the conditional papers over it. ionic_lif_addr() and _ionoc_lif_rx_mode() can be called from: 1) ->ndo_set_rx_mode() which is under netif_addr_lock_bh()) so it must not sleep. 2) Init and setup functions which are in fully preemptible task context. ionic_link_status_check_request() has two call paths: 1) NAPI which obviously cannot sleep 2) Setup which is again fully preemptible task context Add arguments which convey the execution context to the affected functions and let the callers provide the context instead of letting the functions deduce it. Signed-off-by: -
Sebastian Andrzej Siewior authored
in_interrupt() is ill defined and does not provide what the name suggests. The usage especially in driver code is deprecated and a tree wide effort to clean up and consolidate the (ab)usage of in_interrupt() and related checks is happening. In this case the checks cover only parts of the contexts in which these functions cannot be called. They fail to detect preemption or interrupt disabled invocations. As the functions which are invoked from the various places contain already a broad variety of checks (always enabled or debug option dependent) cover all invalid conditions already, there is no point in having inconsistent warnings in those drivers. Just remove them. Signed-off-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be seperated or the context be conveyed in an argument passed by the caller, which usually knows the context. mpc52xx_fec_stop() uses in_interrupt() to check if it is safe to sleep. All callers run in well defined contexts. Pass an argument from the callers indicating whether it is safe to sleep. Signed-off-by:
-
Sebastian Andrzej Siewior authored
e100_hw_init() invokes e100_self_test() only if in_interrupt() returns false as e100_self_test() uses msleep() which requires sleepable task context. The in_interrupt() check is incomplete because in_interrupt() cannot catch callers from contexts which have just preemption or interrupts disabled. e100_hw_init() is invoked from: - e100_loopback_test() which clearly is sleepable task context as the function uses msleep() itself. - e100_up() which clearly is sleepable task context as well because it invokes e100_alloc_cbs() abd request_irq() which both require sleepable task context due to GFP_KERNEL allocations and mutex_lock() operations. Remove the pointless in_interrupt() check. As a side effect of this analysis it turned out that e100_rx_alloc_list() which is only invoked from e100_loopback_test() and e100_up() pointlessly uses a GFP_ATOMIC allocation. The next invoked function e100_alloc_cbs() is using GFP_KERNEL already. Change the allocation mode in e100_rx_alloc_list() to GFP_KERNEL as well. Signed-off-by: -
Thomas Gleixner authored
t4_sge_stop() is only ever called from task context and the in_interrupt() check is presumably a leftover from copying t3_sge_stop(). Aside of in_interrupt() being deprecated because it's not providing what it claims to provide, this check would paper over illegitimate callers. The functions invoked from t4_sge_stop() contain already warnings to catch invocations from invalid contexts. Remove it. Signed-off-by:
-
Thomas Gleixner authored
t3_sge_stop() is called from task context and from error handlers in interrupt context. It relies on in_interrupt() to differentiate the contexts. in_interrupt() is deprecated as it is ill defined and does not provide what it suggests. Instead of replacing it with some other construct, simply split the function into t3_sge_stop_dma(), which can be called from any context, and t3_sge_stop() which can be only called from task context. This has the advantage that any bogus invocation of t3_sge_stop() from wrong contexts can be caught by debug kernels instead of being papered over by the conditional. Signed-off-by:
-
Thomas Gleixner authored
in_interrupt() is ill defined and does not provide what the name suggests. The usage especially in driver code is deprecated and a tree wide effort to clean up and consolidate the (ab)usage of in_interrupt() and related checks is happening. In this case the check covers only parts of the contexts in which these functions cannot be called. It fails to detect preemption or interrupt disabled invocations. As the functions which are invoked from at*_reinit_locked() contain a broad variety of checks (always enabled or debug option dependent) which cover all invalid conditions already, there is no point in having inconsistent warnings in those drivers. Just remove them. Signed-off-by:
-
Sebastian Andrzej Siewior authored
The usage of in_interrupt() in non-core code is phased out. Ideally the information of the calling context should be passed by the callers or the functions be split as appropriate. cfhsi_rx_desc() and cfhsi_rx_pld() use in_interrupt() to distinguish if they should use netif_rx() or netif_rx_ni() for receiving packets. The attempt to consolidate the code by passing an arguemnt or by distangling it failed due lack of knowledge about this driver and because the call chains are hard to follow. As a stop gap use netif_rx_any_context() which invokes the correct code path depending on context and confines the in_interrupt() usage to core code. Signed-off-by:
-
Sebastian Andrzej Siewior authored
Quite some drivers make conditional decisions based on in_interrupt() to invoke either netif_rx() or netif_rx_ni(). Conditionals based on in_interrupt() or other variants of preempt count checks in drivers should not exist for various reasons and Linus clearly requested to either split the code pathes or pass an argument to the common functions which provides the context. This is obviously the correct solution, but for some of the affected drivers this needs a major rewrite due to their convoluted structure. As in_interrupt() usage in drivers needs to be phased out, provide netif_rx_any_context() as a stop gap for these drivers. This confines the in_interrupt() conditional to core code which in turn allows to remove the access to this check for driver code and provides one central place to do further modifications once the driver maze is cleaned up. Suggested-by:
-
Thomas Gleixner authored
While chasing in_interrupt() (ab)use in drivers it turned out that the caif_spi driver has never been in use since the driver was merged 10 years ago. There never was any matching code which provides a platform device. The driver has not seen any update (asided of treewide changes and cleanups) since 8 years and the maintainers vanished from the planet. So analysing the potential contexts and the (in)correctness of in_interrupt() usage is just a pointless exercise. Remove the cruft. Signed-off-by:
-
Thomas Gleixner authored
enic_dev_wait() has a BUG_ON(in_interrupt()). Chasing the callers of enic_dev_wait() revealed the gems of enic_reset() and enic_tx_hang_reset() which are both invoked through work queues in order to be able to call rtnl_lock(). So far so good. After locking rtnl both functions acquire enic::enic_api_lock which serializes against the (ab)use from infiniband. This is where the trainwreck starts. enic::enic_api_lock is a spin_lock() which implicitly disables preemption, but both functions invoke a ton of functions under that lock which can sleep. The BUG_ON(in_interrupt()) does not trigger in that case because it can't detect the preempt disabled condition. This clearly has never been tested with any of the mandatory debug options for 7+ years, which would have caught that for sure. Cure it by adding a enic_api_busy member to struct enic, which is modified and evaluated with enic::enic_api_lock held. If enic_api_devcmd_proxy_by_index() observes enic::enic_api_busy as true, it drops enic::enic_api_lock and busy waits for enic::enic_api_busy to become false. It would be smarter to wait for a completion of that busy period, but enic_api_devcmd_proxy_by_index() is called with other spin locks held which obviously can't sleep. Remove the BUG_ON(in_interrupt()) check as well because it's incomplete and with proper debugging enabled the problem would have been caught from the debug checks in schedule_timeout(). Fixes: 0b038566 ("drivers/net: enic: Add an interface for USNIC to interact with firmware") Signed-off-by:
-
Jacob Keller authored
Commit 5d5b4128 ("devlink: introduce flash update overwrite mask") added a usage of _BITUL to the UAPI <linux/devlink.h> header, but failed to include the header file where it was defined. It happens that this does not break any existing kernel include chains because it gets included through other sources. However, when including the UAPI headers in a userspace application (such as devlink in iproute2), _BITUL is not defined. Fixes: 5d5b4128 ("devlink: introduce flash update overwrite mask") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
David S. Miller authored
Rohit Maheshwari says: ==================== cxgb4/ch_ktls: updates in net-next This series of patches improves connections setup and statistics. This series is broken down as follows: Patch 1 fixes the handling of connection setup failure in HW. Driver shouldn't return success to tls_dev_add, until HW returns success. Patch 2 avoids the log flood. Patch 3 adds ktls statistics at port level. v1->v2: - removed conn_up from all places. v2->v3: - Corrected timeout handling. ==================== Signed-off-by: -
Rohit Maheshwari authored
All the ktls stats were at adapter level, but now changing it to port level. Fixes: 62370a4f ("cxgb4/chcr: Add ipv6 support and statistics") Signed-off-by:
Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by:
-
Rohit Maheshwari authored
Changing these logs to dynamic debugs. If issue is seen, these logs can be enabled at run time. Signed-off-by:
-
Rohit Maheshwari authored
Since driver first return success to tls_dev_add, if req to HW is successful, but later if HW returns failure, that connection traffic fails permanently and connection status remains unknown to stack. v1->v2: - removed conn_up from all places. v2->v3: - Corrected timeout handling. Fixes: 34aba2c4 ("cxgb4/chcr : Register to tls add and del callback") Signed-off-by:
-
Gustavo A. R. Silva authored
One-element arrays are being deprecated[1]. Replace the one-element array with a simple object of type u_char: 'u_char rm_pad1'[2], once it seems this is just a placeholder for padding. [1] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays [2] https://github.com/KSPP/linux/issues/86Built-tested-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/5f72c23f.%2FkPBWcZBu+W6HKH4%25lkp@intel.com/Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Tom Parkin authored
When an L2TPv3 session receives a data frame with an incorrect cookie l2tp_core logs a warning message and bumps a stats counter to reflect the fact that the packet has been dropped. However, the stats counter in question is missing from the l2tp_netlink get message for tunnel and session instances. Include the statistic in the netlink get response. Signed-off-by:
Tom Parkin <tparkin@katalix.com> Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-09-29 Here's the main bluetooth-next pull request for 5.10: - Multiple fixes to suspend/resume handling - Added mgmt events for controller suspend/resume state - Improved extended advertising support - btintel: Enhanced support for next generation controllers - Added Qualcomm Bluetooth SoC WCN6855 support - Several other smaller fixes & improvements ==================== Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: updates for -next There are some misc updates for the HNS3 ethernet driver. ==================== Signed-off-by: -
Guangbin Huang authored
Adds debugfs to dump tqp enable status. Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Guangbin Huang authored
In order to query specifications of the device, add a new debugfs command "dev spec" to do that. Signed-off-by:
-
