- 20 Jul, 2017 1 commit
-
-
Mustafa Ismail authored
The order for calling i40iw_destroy_pble_pool is incorrect. Also, add PBLE_CHUNK_MEM init state to track pble pool creation and destruction. Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
- 18 Jul, 2017 19 commits
-
-
Tadeusz Struk authored
Playing with IP-O-IB interface can trigger a warning message: "ib0: Failed to modify QP to ERROR state" to be logged. This happens when the QP is in IB_QPS_RESET state and the stack is trying to transition it to IB_QPS_ERR state in ipoib_ib_dev_stop(). According to the IB spec, Table 91 - "QP State Transition Properties" it looks like the transition from reset to error is valid: Transition: Any State to Error Required Attributes: None Optional Attributes: None allowed Actions: Queue processing is stopped. Work Requests pending or in process are completed in error, when possible. This patch allows the transition and quiets the message. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
oulijun authored
This patch correct the comment style warnings caught by checkpatch.pl script. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
oulijun authored
When modified the MAC address used hns_roce_mac function, we release and create reserved qp again, It is not necessary to use spin_lock_bh and spin_unlock_bh in handle_en_event, Otherwise, it will occur a error. This patch mainly fixes it. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
oulijun authored
When opcode of work request is RDMA read and write, it should use rdma_wr to get remote_addr and rkey. This patch fixes it. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
oulijun authored
When destroyed rc qp, the hr_qp will be used after freed. This patch will fix it. Signed-off-by: Lijun Ou <oulijun@huawei.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
oulijun authored
In hip06 SoC, RoCE driver creates 8 reserved loopback QPs to ensure zero wqe when free mr. However, if the enabled phy port number is less than 6, it will fail in polling cqe with 8 reserved loopback QPs. In order to solve this problem, the number of loopback Qps will be adjusted based on the number of enabled phy port. Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
yonatanc authored
The RXE coupled with dummy device causes to the kernel panic attached below. The panic happens when ib_register_device tries to set dma_mask by accessing a NULLed parent device. The RXE does not actually use DMA, so we can set the dma_mask to architecture value. [16240.199689] RIP: 0010:ib_register_device+0x468/0x5a0 [ib_core] [16240.205289] RSP: 0018:ffffc9000220fc10 EFLAGS: 00010246 [16240.209909] RAX: 0000000000000024 RBX: ffff880220d1a2a8 RCX: 0000000000000000 [16240.212244] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000009 [16240.214385] RBP: ffffc9000220fcb0 R08: 0000000000000000 R09: 000000000000023f [16240.254465] R10: 0000000000000007 R11: 0000000000000000 R12: 0000000000000000 [16240.259467] R13: 0000000000000000 R14: 0000000000000000 R15: ffff880220d1a2a8 [16240.263314] FS: 00007fd8ecca0740(0000) GS:ffff8802364c0000(0000) knlGS:0000000000000000 [16240.267292] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [16240.273503] CR2: 0000000000000218 CR3: 00000002253ba000 CR4: 00000000000006e0 [16240.277066] Call Trace: [16240.281836] ? __kmalloc+0x26f/0x280 [16240.286596] rxe_register_device+0x297/0x300 [rdma_rxe] [16240.291377] rxe_add+0x535/0x5b0 [rdma_rxe] [16240.297586] rxe_net_add+0x3e/0xc0 [rdma_rxe] [16240.302375] rxe_param_set_add+0x65/0x144 [rdma_rxe] [16240.307769] param_attr_store+0x68/0xd0 [16240.311640] module_attr_store+0x1d/0x30 [16240.316421] sysfs_kf_write+0x3a/0x50 [16240.317802] kernfs_fop_write+0xff/0x180 [16240.322989] __vfs_write+0x37/0x140 [16240.328164] ? handle_mm_fault+0xce/0x240 [16240.333340] vfs_write+0xb2/0x1b0 [16240.335013] SyS_write+0x55/0xc0 [16240.340632] entry_SYSCALL_64_fastpath+0x1a/0xa9 Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Yonatan Cohen authored
In the time between rxe_send has finished and skb destructor called, the QP's ref count might be 0, leading to a possible QP destruction. This will lead to a kernel panic when the destructor dereferences the QP. The operation of incrementing QP ref count at rxe_send and decrementing from skb destructor will prevent this crash. BUG: unable to handle kernel NULL pointer dereference at 000000000000072c IP: [<ffffffffa05df765>] rxe_skb_tx_dtor+0x15/0x50 [rdma_rxe] PGD 0 [16240.211178] Oops: 0002 [#1] SMP CPU: 3 PID: 0 Comm: swapper/3 Tainted: G OE 4.9.0-mlnx #1 Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 task: ffff88042d6b1480 task.stack: ffffc90001904000 RIP: 0010:[<ffffffffa05df765>] [<ffffffffa05df765>] rxe_skb_tx_dtor+0x15/0x50 [rdma_rxe] RSP: 0018:ffff88043fcc3df0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880429684700 RCX: ffff88042d248200 RDX: 00000000ffffffff RSI: 00000000fffffe01 RDI: ffff880429684700 RBP: ffff88043fcc3e00 R08: ffff88043fcda240 R09: 00000000ff2d1de6 R10: 0000000000000000 R11: 00000000f49cf6fe R12: ffff880429684700 R13: ffffffff81893f96 R14: ffffffff817d66f0 R15: ffff880427f74200 FS: 0000000000000000(0000) GS:ffff88043fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000072c CR3: 000000041d3df000 CR4: 00000000000006e0 Stack: ffffffff817b29cf ffff880429684700 ffff88043fcc3e18 ffffffff817b42c2 ffff880429684700 ffff88043fcc3e40 ffffffff817b4332 ffff880429684700 ffff880427f74238 ffff880427f74228 ffff88043fcc3e58 ffffffff81893f96 Call Trace: <IRQ> [16240.336345] [<ffffffff817b29cf>] ? skb_release_head_state+0x4f/0xb0 [<ffffffff817b42c2>] skb_release_all+0x12/0x30 [<ffffffff817b4332>] kfree_skb+0x32/0x90 [<ffffffff81893f96>] ndisc_error_report+0x36/0x40 [<ffffffff817d4de1>] neigh_invalidate+0x81/0xf0 [<ffffffff817d68f7>] neigh_timer_handler+0x207/0x2b0 [<ffffffff81109295>] call_timer_fn+0x35/0x120 [<ffffffff81109db7>] run_timer_softirq+0x1d7/0x460 [<ffffffff8106155e>] ? kvm_sched_clock_read+0x1e/0x30 [<ffffffff810366b9>] ? sched_clock+0x9/0x10 [<ffffffff810cfed2>] ? sched_clock_cpu+0x72/0xa0 [<ffffffff818dd537>] __do_softirq+0xd7/0x289 [<ffffffff810a6c95>] irq_exit+0xb5/0xc0 [<ffffffff818dd372>] smp_apic_timer_interrupt+0x42/0x50 [<ffffffff818dc682>] apic_timer_interrupt+0x82/0x90 <EOI> [16240.395776] [<ffffffff818da156>] ? native_safe_halt+0x6/0x10 [<ffffffff818d9e6e>] default_idle+0x1e/0xd0 [<ffffffff8103797f>] arch_cpu_idle+0xf/0x20 [<ffffffff818da2c5>] default_idle_call+0x35/0x40 [<ffffffff810e3eb5>] cpu_startup_entry+0x185/0x210 [<ffffffff81050433>] start_secondary+0x103/0x130 RIP [<ffffffffa05df765>] rxe_skb_tx_dtor+0x15/0x50 [rdma_rxe] Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Erez Shitrit authored
The driver checks if the lower level driver supports get_stats, and if so calls it to get the updated statistics, otherwise takes from the current netdevice stats object. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Majd Dibbiny authored
Currently the RoCE GID management uses the ib_wq to do add and delete new GIDs according to the netdev events. The ib_wq isn't an ordered workqueue and thus two work elements can be executed concurrently which will result in unexpected behavior and inconsistency of the GIDs cache content. Example: ifconfig eth1 11.11.11.11/16 up This command will invoke the following netdev events in the following order: 1. NETDEV_UP 2. NETDEV_DOWN 3. NETDEV_UP If (2) and (3) will be executed concurrently or in reverse order, instead of having a new GID with 11.11.11.11 IP, we will end up without any new GIDs. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Leon Romanovsky authored
The failure in creation of debugfs entries for mr_cache left entries, which were already created. It caused to mismatch and misguiding for the end users. The solution is to clean mr_cache debugfs root, so no leftovers will be in the system. In addition, let's document why the error is not needed to be forwarded to user in case of failure. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Leon Romanovsky authored
There are no users for IB_QP_CREATE_USE_GFP_NOIO flag, so let's remove it. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Leon Romanovsky authored
The caller to the driver marks GFP_NOIO allocations with help of memalloc_noio-* calls now. This makes redundant to pass down to the driver gfp flags, which can be GFP_KERNEL only. The patch removes the gfp flags argument and updates all driver paths. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Leon Romanovsky authored
The caller to the driver marks GFP_NOIO allocations with help of memalloc_noio-* calls now. This makes redundant to pass down to the driver gfp flags, which can be GFP_KERNEL only. The patch removes the gfp flags argument and updates all driver paths. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Leon Romanovsky authored
Commit 21caf2fc ("mm: teach mm by current context info to not do I/O during memory allocation") added the memalloc_noio_(save|restore) functions to enable people to modify the MM behavior by disabling I/O during memory allocation. This was further extended in Fixes: 934f3072 ("mm: clear __GFP_FS when PF_MEMALLOC_NOIO is set"). memalloc_noio_* functions prevent allocation paths recursing back into the filesystem without explicitly changing the flags for every allocation site. However the IPoIB hasn't been keeping up with the changes and missed completely these memalloc_noio_* calls. This led to update of allocation site with special QP creation flag, see commit 09b93088 ("IB: Add a QP creation flag to use GFP_NOIO allocations"), while this flag is supported by small number of drivers in IB stack. Let's change it by updating to memalloc_noio_* calls and allow for every driver underneath enjoy NOIO allocations. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Erez Shitrit authored
This patch checks if there is a driver below that needs to be updated on the new MTU and calls it accordingly. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Leon Romanovsky authored
The msleep(1) may do not sleep 1 ms as expected and will sleep longer. The simple conversion from msleep to usleep_range between 1ms and 2ms can solve an issue. The full and comprehensive explanation can be found at [1] and [2]. [1] https://lkml.org/lkml/2007/8/3/250 [2] Documentation/timers/timers-howto.txt Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Parav Pandit authored
This patch makes use of IB core's ib_modify_qp_with_udata function that also resolves the DMAC and handles udata. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Parav Pandit authored
This patch adds new function ib_modify_qp_with_udata so that uverbs layer can avoid handling L2 mac address at verbs layer and depend on the core layer to resolve the mac address consistently for all required QPs. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
- 17 Jul, 2017 7 commits
-
-
Moni Shoua authored
When resolving an IP address that is on the host of the caller the result from querying the routing table is the loopback device. This is not a valid response, because it doesn't represent the RDMA device and the port. Therefore, callers need to check the resolved device and if it is a loopback device find an alternative way to resolve it. To avoid this we make sure that the response from rdma_resolve_ip() will not be the loopback device. While that, we fix an static checker warning about dereferencing an unintitialized pointer using the same solution as in commit abeffce9 ("net/mlx5e: Fix a -Wmaybe-uninitialized warning") as a reference. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Moni Shoua authored
In function addr_resolve() the namespace is a required input parameter and not an output. It is passed later for searching the routing table and device addresses. Also, it shouldn't be copied back to the caller. Fixes: 565edd1d ('IB/addr: Pass network namespace as a parameter') Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Vladimir Neyelov authored
Under heavy iser target(scst) start/stop stress during login/logout on iser intitiator side happened trace call provided below. The function iscsi_iser_slave_alloc iser_conn pointer could be NULL, due to the fact that function iscsi_iser_conn_stop can be called before and free iser connection. Let's protect that flow by introducing global mutex. BUG: unable to handle kernel paging request at 0000000000001018 IP: [<ffffffffc0426f7e>] iscsi_iser_slave_alloc+0x1e/0x50 [ib_iser] Call Trace: ? scsi_alloc_sdev+0x242/0x300 scsi_probe_and_add_lun+0x9e1/0xea0 ? kfree_const+0x21/0x30 ? kobject_set_name_vargs+0x76/0x90 ? __pm_runtime_resume+0x5b/0x70 __scsi_scan_target+0xf6/0x250 scsi_scan_target+0xea/0x100 iscsi_user_scan_session.part.13+0x101/0x130 [scsi_transport_iscsi] ? iscsi_user_scan_session.part.13+0x130/0x130 [scsi_transport_iscsi] iscsi_user_scan_session+0x1e/0x30 [scsi_transport_iscsi] device_for_each_child+0x50/0x90 iscsi_user_scan+0x44/0x60 [scsi_transport_iscsi] store_scan+0xa8/0x100 ? common_file_perm+0x5d/0x1c0 dev_attr_store+0x18/0x30 sysfs_kf_write+0x37/0x40 kernfs_fop_write+0x12c/0x1c0 __vfs_write+0x18/0x40 vfs_write+0xb5/0x1a0 SyS_write+0x55/0xc0 Fixes: 318d311e ("iser: Accept arbitrary sg lists mapping if the device supports it") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Vladimir Neyelov <vladimirn@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimbeg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Gustavo A. R. Silva authored
While looking into Coverity ID 1351047 I ran into the following piece of code at drivers/infiniband/core/verbs.c:496: ret = rdma_addr_find_l2_eth_by_grh(&dgid, &sgid, ah_attr->dmac, wc->wc_flags & IB_WC_WITH_VLAN ? NULL : &vlan_id, &if_index, &hoplimit); The issue here is that the position of arguments in the call to rdma_addr_find_l2_eth_by_grh() function do not match the order of the parameters: &dgid is passed to sgid &sgid is passed to dgid This is the function prototype: int rdma_addr_find_l2_eth_by_grh(const union ib_gid *sgid, const union ib_gid *dgid, u8 *dmac, u16 *vlan_id, int *if_index, int *hoplimit) My question here is if this is intentional? Answer: Yes. ib_init_ah_from_wc() creates ah from the incoming packet. Incoming packet has dgid of the receiver node on which this code is getting executed and sgid contains the GID of the sender. When resolving mac address of destination, you use arrived dgid as sgid and use sgid as dgid because sgid contains destinations GID whom to respond to. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Bart Van Assche authored
ib_map_mr_sg() can pass an SG-list to .map_mr_sg() that is larger than what fits into a single MR. .map_mr_sg() must not attempt to map more SG-list elements than what fits into a single MR. Hence make sure that mlx5_ib_sg_to_klms() does not write outside the MR klms[] array. Fixes: b005d316 ("mlx5: Add arbitrary sg list support") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Israel Rukshin <israelr@mellanox.com> Cc: <stable@vger.kernel.org> Acked-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Dennis Dalessandro authored
As the code stands today the array access in remap_intr() is OK. To future proof the code though we should explicitly check to ensure the index value is not outside of the valid range. This is not a straight forward calculation so err on the side of caution. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
-
Doug Ledford authored
Linux v4.13-rc1
-
- 15 Jul, 2017 13 commits
-
-
Linus Torvalds authored
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation format standardization from Jonathan Corbet: "This series converts a number of top-level documents to the RST format without incorporating them into the Sphinx tree. The hope is to bring some uniformity to kernel documentation and, perhaps more importantly, have our existing docs serve as an example of the desired formatting for those that will be added later. Mauro has gone through and fixed up a lot of top-level documentation files to make them conform to the RST format, but without moving or renaming them in any way. This will help when we incorporate the ones we want to keep into the Sphinx doctree, but the real purpose is to bring a bit of uniformity to our documentation and let the top-level docs serve as examples for those writing new ones" * tag 'standardize-docs' of git://git.lwn.net/linux: (84 commits) docs: kprobes.txt: Fix whitespacing tee.txt: standardize document format cgroup-v2.txt: standardize document format dell_rbu.txt: standardize document format zorro.txt: standardize document format xz.txt: standardize document format xillybus.txt: standardize document format vfio.txt: standardize document format vfio-mediated-device.txt: standardize document format unaligned-memory-access.txt: standardize document format this_cpu_ops.txt: standardize document format svga.txt: standardize document format static-keys.txt: standardize document format smsc_ece1099.txt: standardize document format SM501.txt: standardize document format siphash.txt: standardize document format sgi-ioc4.txt: standardize document format SAK.txt: standardize document format rpmsg.txt: standardize document format robust-futexes.txt: standardize document format ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds authored
Pull random updates from Ted Ts'o: "Add wait_for_random_bytes() and get_random_*_wait() functions so that callers can more safely get random bytes if they can block until the CRNG is initialized. Also print a warning if get_random_*() is called before the CRNG is initialized. By default, only one single-line warning will be printed per boot. If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a warning will be printed for each function which tries to get random bytes before the CRNG is initialized. This can get spammy for certain architecture types, so it is not enabled by default" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: reorder READ_ONCE() in get_random_uXX random: suppress spammy warnings about unseeded randomness random: warn when kernel uses unseeded randomness net/route: use get_random_int for random counter net/neighbor: use get_random_u32 for 32-bit hash random rhashtable: use get_random_u32 for hash_rnd ceph: ensure RNG is seeded before using iscsi: ensure RNG is seeded before use cifs: use get_random_u32 for 32-bit lock random random: add get_random_{bytes,u32,u64,int,long,once}_wait family random: add wait_for_random_bytes() API
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull ->s_options removal from Al Viro: "Preparations for fsmount/fsopen stuff (coming next cycle). Everything gets moved to explicit ->show_options(), killing ->s_options off + some cosmetic bits around fs/namespace.c and friends. Basically, the stuff needed to work with fsmount series with minimum of conflicts with other work. It's not strictly required for this merge window, but it would reduce the PITA during the coming cycle, so it would be nice to have those bits and pieces out of the way" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: isofs: Fix isofs_show_options() VFS: Kill off s_options and helpers orangefs: Implement show_options 9p: Implement show_options isofs: Implement show_options afs: Implement show_options affs: Implement show_options befs: Implement show_options spufs: Implement show_options bpf: Implement show_options ramfs: Implement show_options pstore: Implement show_options omfs: Implement show_options hugetlbfs: Implement show_options VFS: Don't use save/replace_mount_options if not using generic_show_options VFS: Provide empty name qstr VFS: Make get_filesystem() return the affected filesystem VFS: Clean up whitespace in fs/namespace.c and fs/super.c Provide a function to create a NUL-terminated string from unterminated data
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more __copy_.._user elimination from Al Viro. * 'work.__copy_to_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: drm_dp_aux_dev: switch to read_iter/write_iter
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull uacess-unaligned removal from Al Viro: "That stuff had just one user, and an exotic one, at that - binfmt_flat on arm and m68k" * 'work.uaccess-unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kill {__,}{get,put}_user_unaligned() binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull network field-by-field copy-in updates from Al Viro: "This part of the misc compat queue was held back for review from networking folks and since davem has jus ACKed those..." * 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: get_compat_bpf_fprog(): don't copyin field-by-field get_compat_msghdr(): get rid of field-by-field copyin copy_msghdr_from_user(): get rid of field-by-field copyin
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "Boston platform support: - Document DT bindings - Add CLK driver for board clocks CM: - Avoid per-core locking with CM3 & higher - WARN on attempt to lock invalid VP, not BUG CPS: - Select CONFIG_SYS_SUPPORTS_SCHED_SMT for MIPSr6 - Prevent multi-core with dcache aliasing - Handle cores not powering down more gracefully - Handle spurious VP starts more gracefully DSP: - Add lwx & lhx missaligned access support eBPF: - Add MIPS support along with many supporting change to add the required infrastructure Generic arch code: - Misc sysmips MIPS_ATOMIC_SET fixes - Drop duplicate HAVE_SYSCALL_TRACEPOINTS - Negate error syscall return in trace - Correct forced syscall errors - Traced negative syscalls should return -ENOSYS - Allow samples/bpf/tracex5 to access syscall arguments for sane traces - Cleanup from old Kconfig options in defconfigs - Fix PREF instruction usage by memcpy for MIPS R6 - Fix various special cases in the FPU eulation - Fix some special cases in MIPS16e2 support - Fix MIPS I ISA /proc/cpuinfo reporting - Sort MIPS Kconfig alphabetically - Fix minimum alignment requirement of IRQ stack as required by ABI / GCC - Fix special cases in the module loader - Perform post-DMA cache flushes on systems with MAARs - Probe the I6500 CPU - Cleanup cmpxchg and add support for 1 and 2 byte operations - Use queued read/write locks (qrwlock) - Use queued spinlocks (qspinlock) - Add CPU shared FTLB feature detection - Handle tlbex-tlbp race condition - Allow storing pgd in C0_CONTEXT for MIPSr6 - Use current_cpu_type() in m4kc_tlbp_war() - Support Boston in the generic kernel Generic platform: - yamon-dt: Pull YAMON DT shim code out of SEAD-3 board - yamon-dt: Support > 256MB of RAM - yamon-dt: Use serial* rather than uart* aliases - Abstract FDT fixup application - Set RTC_ALWAYS_BCD to 0 - Add a MAINTAINERS entry core kernel: - qspinlock.c: include linux/prefetch.h Loongson 3: - Add support Perf: - Add I6500 support SEAD-3: - Remove GIC timer from DT - Set interrupt-parent per-device, not at root node - Fix GIC interrupt specifiers SMP: - Skip IPI setup if we only have a single CPU VDSO: - Make comment match reality - Improvements to time code in VDSO" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (86 commits) locking/qspinlock: Include linux/prefetch.h MIPS: Fix MIPS I ISA /proc/cpuinfo reporting MIPS: Fix minimum alignment requirement of IRQ stack MIPS: generic: Support MIPS Boston development boards MIPS: DTS: img: Don't attempt to build-in all .dtb files clk: boston: Add a driver for MIPS Boston board clocks dt-bindings: Document img,boston-clock binding MIPS: Traced negative syscalls should return -ENOSYS MIPS: Correct forced syscall errors MIPS: Negate error syscall return in trace MIPS: Drop duplicate HAVE_SYSCALL_TRACEPOINTS select MIPS16e2: Provide feature overrides for non-MIPS16 systems MIPS: MIPS16e2: Report ASE presence in /proc/cpuinfo MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions MIPS: MIPS16e2: Identify ASE presence MIPS: VDSO: Fix a mismatch between comment and preprocessor constant MIPS: VDSO: Add implementation of gettimeofday() fallback MIPS: VDSO: Add implementation of clock_gettime() fallback MIPS: VDSO: Fix conversions in do_monotonic()/do_monotonic_coarse() MIPS: Use current_cpu_type() in m4kc_tlbp_war() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML updates from Richard Weinberger: "Mostly fixes for UML: - First round of fixes for PTRACE_GETRESET/SETREGSET - A printf vs printk cleanup - Minor improvements" * 'for-linus-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Correctly check for PTRACE_GETRESET/SETREGSET um: v2: Use generic NOTES macro um: Add kerneldoc for userspace_tramp() and start_userspace() um: Add kerneldoc for segv_handler um: stub-data.h: remove superfluous include um: userspace - be more verbose in ptrace set regs error um: add dummy ioremap and iounmap functions um: Allow building and running on older hosts um: Avoid longjmp/setjmp symbol clashes with libpthread.a um: console: Ignore console= option um: Use os_warn to print out pre-boot warning/error messages um: Add os_warn() for pre-boot warning/error messages um: Use os_info for the messages on normal path um: Add os_info() for pre-boot information messages um: Use printk instead of printf in make_uml_dir
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBIFS updates from Richard Weinberger: - Updates and fixes for the file encryption mode - Minor improvements - Random fixes * tag 'upstream-4.13-rc1' of git://git.infradead.org/linux-ubifs: ubifs: Set double hash cookie also for RENAME_EXCHANGE ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs ubifs: Don't leak kernel memory to the MTD ubifs: Change gfp flags in page allocation for bulk read ubifs: Fix oops when remounting with no_bulk_read. ubifs: Fail commit if TNC is obviously inconsistent ubifs: allow userspace to map mounts to volumes ubifs: Wire-up statx() support ubifs: Remove dead code from ubifs_get_link() ubifs: Massage debug prints wrt. fscrypt ubifs: Add assert to dent_key_init() ubifs: Fix unlink code wrt. double hash lookups ubifs: Fix data node size for truncating uncompressed nodes ubifs: Don't encrypt special files on creation ubifs: Fix memory leak in RENAME_WHITEOUT error path in do_rename ubifs: Fix inode data budget in ubifs_mknod ubifs: Correctly evict xattr inodes ubifs: Unexport ubifs_inode_slab ubifs: don't bother checking for encryption key in ->mmap() ubifs: require key for truncate(2) of encrypted file
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more KVM updates from Radim Krčmář: "Second batch of KVM updates for v4.13 Common: - add uevents for VM creation/destruction - annotate and properly access RCU-protected objects s390: - rename IOCTL added in the first v4.13 merge x86: - emulate VMLOAD VMSAVE feature in SVM - support paravirtual asynchronous page fault while nested - add Hyper-V userspace interfaces for better migration - improve master clock corner cases - extend internal error reporting after EPT misconfig - correct single-stepping of emulated instructions in SVM - handle MCE during VM entry - fix nVMX VM entry checks and nVMX VMCS shadowing" * tag 'kvm-4.13-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) kvm: x86: hyperv: make VP_INDEX managed by userspace KVM: async_pf: Let guest support delivery of async_pf from guest mode KVM: async_pf: Force a nested vmexit if the injected #PF is async_pf KVM: async_pf: Add L1 guest async_pf #PF vmexit handler KVM: x86: Simplify kvm_x86_ops->queue_exception parameter list kvm: x86: hyperv: add KVM_CAP_HYPERV_SYNIC2 KVM: x86: make backwards_tsc_observed a per-VM variable KVM: trigger uevents when creating or destroying a VM KVM: SVM: Enable Virtual VMLOAD VMSAVE feature KVM: SVM: Add Virtual VMLOAD VMSAVE feature definition KVM: SVM: Rename lbr_ctl field in the vmcb control area KVM: SVM: Prepare for new bit definition in lbr_ctl KVM: SVM: handle singlestep exception when skipping emulated instructions KVM: x86: take slots_lock in kvm_free_pit KVM: s390: Fix KVM_S390_GET_CMMA_BITS ioctl definition kvm: vmx: Properly handle machine check during VM-entry KVM: x86: update master clock before computing kvmclock_offset kvm: nVMX: Shadow "high" parts of shadowed 64-bit VMCS fields kvm: nVMX: Fix nested_vmx_check_msr_bitmap_controls kvm: nVMX: Validate the I/O bitmaps on nested VM-entry ...
-
Sebastian Andrzej Siewior authored
Avoid the READ_ONCE in commit 4a072c71 ("random: silence compiler warnings and fix race") if we can leave the function after arch_get_random_XXX(). Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
Theodore Ts'o authored
Unfortunately, on some models of some architectures getting a fully seeded CRNG is extremely difficult, and so this can result in dmesg getting spammed for a surprisingly long time. This is really bad from a security perspective, and so architecture maintainers really need to do what they can to get the CRNG seeded sooner after the system is booted. However, users can't do anything actionble to address this, and spamming the kernel messages log will only just annoy people. For developers who want to work on improving this situation, CONFIG_WARN_UNSEEDED_RANDOM has been renamed to CONFIG_WARN_ALL_UNSEEDED_RANDOM. By default the kernel will always print the first use of unseeded randomness. This way, hopefully the security obsessed will be happy that there is _some_ indication when the kernel boots there may be a potential issue with that architecture or subarchitecture. To see all uses of unseeded randomness, developers can enable CONFIG_WARN_ALL_UNSEEDED_RANDOM. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-