Make sure to register the GPIO chip after requesting the
interrupt and setting up the IRQ members of the irqchip.

Fixes: 97450796 ("gpio: stmpe: Use irqchip template")
Reported-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Patrice Chotard <patrice.chotard@st.com>
Link: https://lore.kernel.org/r/20200728072706.348725-1-linus.walleij@linaro.org

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().

The irqchip is instead added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Biju Das <biju.das@bp.renesas.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200722113141.243163-1-linus.walleij@linaro.org

GPIO_REGMAP_ADDR_ZERO() cast to unsigned long but the actual config
parameters are unsigned int. We use unsigned int here because that is
the type which is used by the underlying regmap.

Fixes: ebe36319 ("gpio: add a reusable generic gpio_chip using regmap")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200725232337.27581-1-michael@walle.ccSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Fix kernel-doc comment to match parameter name change "chip" to "gc"
in gpiochip_add_data function.
Signed-off-by: Colton Lewis <colton.w.lewis@protonmail.com>
Link: https://lore.kernel.org/r/20200723095658.234668-1-colton.w.lewis@protonmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().

The irqchip is instead added while adding the gpiochip.
Also move the IRQ initialization to the special .init_hw()
callback.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20200722110649.202223-1-linus.walleij@linaro.org

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().

The irqchip is instead added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20200722110027.192782-1-linus.walleij@linaro.org

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().

The irqchip is instead added while adding the gpiochip.
Also move the IRQ initialization to the special .init_hw()
callback.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20200722105517.186137-1-linus.walleij@linaro.org

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().

The irqchip is instead added while adding the gpiochip.
Also move the IRQ initialization to the special .init_hw()
callback.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20200722104820.174654-1-linus.walleij@linaro.org

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().

The irqchip is instead added while adding the gpiochip.
Also move the IRQ initialization to the special .init_hw()
callback.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20200722103915.162156-1-linus.walleij@linaro.org

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().

The irqchip is instead added while adding the gpiochip.
Also move the IRQ initialization to the special .init_hw()
callback.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20200722101938.151265-1-linus.walleij@linaro.org

Change the handling of pin config flags from if/else to switch
statement to make the code more readable and cleaner.
Suggested-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200722120755.230741-1-drew@beagleboard.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add(). The irqchip is
instead added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Cc: Octavian Purdila <octavian.purdila@nxp.com>
Link: https://lore.kernel.org/r/20200722073426.38890-1-linus.walleij@linaro.org

Merge tag 'intel-gpio-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into devel

intel-gpio for v5.9-1

* Move GPIO PMIC drivers to use IRQ chip template
* Introduce for_each_requested_gpio() and convert existing users
* Replace unsigned by unsigned int in few drivers
* Fix an issue in kernel doc that validator complains about
* Move to verbose debug level the IRQ status message in gpio-pch

The following is an automated git shortlog grouped by driver:

ARM/orion/gpio:
 -  Make use of for_each_requested_gpio()

crystalcove:
 -  Use irqchip template
 -  changed every 'unsigned' to 'unsigned int'

gpiolib:
 -  Introduce for_each_requested_gpio_in_range() macro

gpio-ml-ioh:
 -  Fix missing ':' in 'struct ioh_gpio_reg_data

ich:
 -  changed every 'unsigned' to 'unsigned int'

mvebu:
 -  Make use of for_each_requested_gpio()

pch:
 -  Add a blank line between declaration and code
 -  changed every 'unsigned' to 'unsigned int'
 -  Move IRQ status message to verbose debug level

pinctrl:
 -  at91: Make use of for_each_requested_gpio()

sch:
 -  Add a blank line between declaration and code
 -  changed every 'unsigned' to 'unsigned int'

wcove:
 -  Use irqchip template

xra1403:
 -  Make use of for_each_requested_gpio()

Added a lined between a declaration and other statements according to the
kernel coding style.
Signed-off-by: Abanoub Sameh <abanoubsameh@protonmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Changed 'unsigned' to 'unsigned int'.
This makes the code more uniform, and compliant with the kernel coding style.
Signed-off-by: Abanoub Sameh <abanoubsameh@protonmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Changed 'unsigned' to 'unsigned int'.
This makes the code more uniform, and compliant with the kernel coding style.
Signed-off-by: Abanoub Sameh <abanoubsameh@protonmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.

Cc: Bin Gao <bin.gao@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Changed 'unsigned' to 'unsigned int'.
This makes the code more uniform, and compliant with the kernel coding style.
Signed-off-by: Abanoub Sameh <abanoubsameh@protonmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Added a lined between a declaration and other statements according to the
kernel coding style.
Signed-off-by: Abanoub Sameh <abanoubsameh@protonmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Changed 'unsigned' to 'unsigned int'.
This makes the code more uniform, and compliant with the kernel coding style.
Signed-off-by: Abanoub Sameh <abanoubsameh@protonmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Adam Ford <aford173@gmail.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200717144040.63253-1-linus.walleij@linaro.org

Modify omap_gpio_set_config() to handle pin config bias flags by calling
gpiochip_generic_config().

The pin group for the gpio line must have the corresponding pinconf
properties:

PIN_CONFIG_BIAS_PULL_UP requires "pinctrl-single,bias-pullup"
PIN_CONFIG_BIAS_PULL_DOWN requires "pinctrl-single,bias-pulldown"

This is necessary for pcs_pinconf_set() to find the requested bias
parameter in the PIN_MAP_TYPE_CONFIGS_GROUP pinctrl map.
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20200715213738.1640030-1-drew@beagleboard.org
Link: https://lore.kernel.org/r/20200717194043.1774643-1-drew@beagleboard.org

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Anders Darander <anders@chargestorm.se>
Cc: Roger Quadros <rogerq@ti.com>
Link: https://lore.kernel.org/r/20200717144835.68150-1-linus.walleij@linaro.org

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Cc: Nikolaus Voss <nv@vosn.de>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20200716150502.195821-1-linus.walleij@linaro.org

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Lars Poeschel <poeschel@lemonage.de>
Link: https://lore.kernel.org/r/20200716120318.127176-1-linus.walleij@linaro.org

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Alexandre TORGUE <alexandre.torgue@st.com>
Link: https://lore.kernel.org/r/20200716100638.112451-1-linus.walleij@linaro.org

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200716093459.76378-1-linus.walleij@linaro.org

Most other drivers fill out the gpio_irq_chip using a
struct gpio_irq_chip *girq helper variable for ease of
reading.

We also make a habit of explicitly assigning NULL and
zero to the parent IRQs when using ordinary IRQ handlers
in the driver, mostly for code readability and
maintenance.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Cc: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200716092835.69176-1-linus.walleij@linaro.org

Use for_each_set_bit() instead of open-coding it to simplify the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200713154429.23662-1-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

This patch adds device tree bindings for the NXP PCA9570,
a 4-bit I2C GPO expander.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200630160934.1197066-1-mans0n@gorani.runSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

NXP PCA9570 is a 4-bit I2C GPO expander without interrupt functionality.
Its ports are controlled only by a data byte without register address.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Datasheet: https://www.nxp.com/docs/en/data-sheet/PCA9570.pdf
Link: https://lore.kernel.org/r/20200709134829.216393-1-mans0n@gorani.runSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

I noticed on Nexus 7 that after rebooting from downstream kernel to
upstream, the GPIO interrupt is triggering non-stop despite interrupts
being disabled for all of GPIOs. This happens because Nexus 7 uses a
soft-reboot, meaning that bootloader should take care of resetting
hardware, but the bootloader doesn't do it well. As a result, GPIO
interrupt may be left ON at a boot time. Let's mask all GPIO interrupts
at the driver's initialization time in order to resolve the issue.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Link: https://lore.kernel.org/r/20200709171203.12950-7-digetx@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

This change addresses one of the GPIO-core TODOs for the MAX77620 driver
which requires modern drivers to use the irqchip template. Instead of
using the GPIO's irqchip-helpers for creating the IRQ domain, the
gpio_irq_chip structure is now filled by the driver itself and then
gpiochip_add_data() takes care of instantiating the IRQ domain for us.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Link: https://lore.kernel.org/r/20200709171203.12950-6-digetx@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The platform_get_irq() returns a positive interrupt number on success and
negative error code on failure (zero shouldn't ever happen in practice, it
would produce a noisy warning). Hence let's return the error code directly
instead of overriding it with -ENODEV.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Link: https://lore.kernel.org/r/20200709171203.12950-5-digetx@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The gpiochip_add_data() takes care of setting the of_node to the parent's
device of_node, hence there is no need to do it manually in the driver's
code. This patch corrects the parent's device pointer and removes the
unnecessary setting of the of_node.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Link: https://lore.kernel.org/r/20200709171203.12950-4-digetx@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The requested interrupt is never released by the driver. Fix this by
using the resource-managed variant of request_threaded_irq().

Fixes: ab3dd9cc ("gpio: max77620: Fix interrupt handling")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Cc: <stable@vger.kernel.org> # 5.5+
Link: https://lore.kernel.org/r/20200709171203.12950-3-digetx@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The MAX77620_GPIO_NR enum value represents the total number of GPIOs,
let's use it instead of a raw value in order to improve the code's
readability a tad.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Link: https://lore.kernel.org/r/20200709171203.12950-2-digetx@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'gpio-updates-for-v5.9-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel

gpio updates for v5.9 - part 2

- several improvements and minor tweaks to the GPIO character device code

Fix bogus close warning that occurs when opening the character device
fails.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>