- 21 Jun, 2018 14 commits
-
-
Mark Rutland authored
We define a trivial fallback for atomic_inc_not_zero(), but don't do the same for atomic64_inc_not_zero(), leading most architectures to define the same boilerplate. Let's add a fallback in <linux/atomic.h>, and remove the redundant implementations. Note that atomic64_add_unless() is always defined in <linux/atomic.h>, and promotes its arguments to the requisite types, so we need not do this explicitly. There should be no functional change as a result of this patch. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Reviewed-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Palmer Dabbelt <palmer@sifive.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/20180621121321.4761-6-mark.rutland@arm.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Mark Rutland authored
Some of the atomics return a status value, which is a boolean value describing whether the operation was performed. To make it clear that this is a boolean value, let's update the common fallbacks to return bool, fixing up the return values and comments likewise. At the same time, let's simplify the description of the operations in their respective comments. The instrumented atomics and generic atomic64 implementation are updated accordingly. Note that atomic64_dec_if_positive() doesn't follow the usual test op pattern, and returns the would-be decremented value. This is not changed. Signed-off-by:
-
Mark Rutland authored
While documentation suggests atomic_inc_not_zero_hint() will perform better than atomic_inc_not_zero(), this is unlikely to be the case. No architectures implement atomic_inc_not_zero_hint() directly, and thus it either falls back to atomic_inc_not_zero(), or a loop using atomic_cmpxchg(). Whenever the hint does not match the value in memory, the repeated use of atomic_cmpxchg() will be more expensive than the read that atomic_inc_not_zero_hint() attempts to avoid. For architectures with LL/SC atomics, a read cannot be avoided, and it would always be better to use atomic_inc_not_zero() directly. For other architectures, their own atomic_inc_not_zero() is likely to be more optimal than an atomic_cmpxchg() loop regardless. Generally, atomic_inc_not_zero_hint() is liable to perform worse than atomic_inc_not_zero(). Further, atomic_inc_not_zero_hint() only exists for atomic_t, and not atomic64_t or atomic_long_t, and there is only one user in the kernel tree. Given all this, let's remove atomic_inc_not_zero_hint(), and migrate the existing user over to atomic_inc_not_zero(). There should be no functional change as a result of this patch. Signed-off-by:
-
Mark Rutland authored
When atomic_inc_not_zero(v) isn't defined, <linux/atomic.h> will define it as falling back to atomic_add_unless((v), 1, 0), so there's no need for arch code to do so. There should be no functional change as a result of this patch. Signed-off-by:
-
Mark Rutland authored
While __atomic_add_unless() was originally intended as a building-block for atomic_add_unless(), it's now used in a number of places around the kernel. It's the only common atomic operation named __atomic*(), rather than atomic_*(), and for consistency it would be better named atomic_fetch_add_unless(). This lack of consistency is slightly confusing, and gets in the way of scripting atomics. Given that, let's clean things up and promote it to an official part of the atomics API, in the form of atomic_fetch_add_unless(). This patch converts definitions and invocations over to the new name, including the instrumented version, using the following script: ---- git grep -w __atomic_add_unless | while read line; do sed -i '{s/\<__atomic_add_unless\>/atomic_fetch_add_unless/}' "${line%%:*}"; done git grep -w __arch_atomic_add_unless | while read line; do sed -i '{s/\<__arch_atomic_add_unless\>/arch_atomic_fetch_add_unless/}' "${line%%:*}"; done ---- Note that we do not have atomic{64,_long}_fetch_add_unless(), which will be introduced by later patches. There should be no functional change as a result of this patch. Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
-
Will Deacon authored
<asm-generic/bitops/ext2-atomic-setbit.h> provides the ext2 atomic bitop definitions, so we don't need to define our own. Signed-off-by:
-
Will Deacon authored
The <asm-generic/bitops/{atomic,lock}.h> implementations are built around the atomic-fetch ops, which we implement efficiently for both LSE and LL/SC systems. Use that instead of our hand-rolled, out-of-line bitops.S. Signed-off-by: -
Will Deacon authored
The lock bitops can be implemented more efficiently using the atomic_fetch_*() ops, which provide finer-grained control over the memory ordering semantics than the bitops. Signed-off-by:
-
Will Deacon authored
The atomic bitops can actually be implemented pretty efficiently using the atomic_*() ops, rather than explicit use of spinlocks. Signed-off-by:
-
Will Deacon authored
The sh implementation of <asm/cmpxchg-xchg.h> pulls in <linux/bitops.h> so that it can refer to BITS_PER_BYTE. It also transitively relies on this pulling in <linux/compiler.h> for READ_ONCE(). Replace the #include with <linux/bits.h> and <linux/compiler.h>. Signed-off-by:
-
Will Deacon authored
The openrisc implementation of <asm/cmpxchg.h> pulls in <linux/bitops.h>, so that it can refer to BITS_PER_BYTE. It also transitively relies on this pulling in <linux/compiler.h> for READ_ONCE(). Replace the #include with <linux/bits.h> and <linux/compiler.h>. Signed-off-by:
-
Will Deacon authored
In preparation for implementing the asm-generic atomic bitops in terms of atomic_long_*(), we need to prevent <asm/atomic.h> implementations from pulling in <linux/bitops.h>. A common reason for this include is for the BITS_PER_BYTE definition, so move this and some other BIT() and masking macros into a new header file, <linux/bits.h>. Signed-off-by:
-
Will Deacon authored
<asm-generic/bitops/lock.h> is shortly going to be built on top of the atomic_long_*() API, which introduces a nasty circular dependency for m68k where <linux/atomic.h> pulls in <linux/bitops.h> via: linux/atomic.h asm/atomic.h linux/irqflags.h asm/irqflags.h linux/preempt.h asm/preempt.h asm-generic/preempt.h linux/thread_info.h asm/thread_info.h asm/page.h asm-generic/getorder.h linux/log2.h linux/bitops.h Since m68k isn't SMP and doesn't support ACQUIRE/RELEASE barriers, we can just define the lock bitops in terms of the atomic bitops in the <asm/bitops.h> header. Signed-off-by:
-
Will Deacon authored
<linux/kernel.h> isn't needed by <asm/atomic.h> and will result in circular dependencies when the asm-generic atomic bitops are built around the atomic_long_t interface. Remove the broad include and replace it with <linux/compiler.h> for READ_ONCE() etc and <asm/irqflags.h> for arch_local_irq_save() etc. Signed-off-by:
-
- 20 Jun, 2018 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Here are eight fairly small fixes collected over the last two weeks. Regression and crashing bug fixes: - mlx4/5: Fixes for issues found from various checkers - A resource tracking and uverbs regression in the core code - qedr: NULL pointer regression found during testing - rxe: Various small bugs" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/rxe: Fix missing completion for mem_reg work requests RDMA/core: Save kernel caller name when creating CQ using ib_create_cq() IB/uverbs: Fix ordering of ucontext check in ib_uverbs_write IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()' RDMA/qedr: Fix NULL pointer dereference when running over iWARP without RDMA-CM IB/mlx5: Fix return value check in flow_counters_set_data() IB/mlx5: Fix memory leak in mlx5_ib_create_flow IB/rxe: avoid double kfree skb
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix crash on bpf_prog_load() errors, from Daniel Borkmann. 2) Fix ATM VCC memory accounting, from David Woodhouse. 3) fib6_info objects need RCU freeing, from Eric Dumazet. 4) Fix SO_BINDTODEVICE handling for TCP sockets, from David Ahern. 5) Fix clobbered error code in enic_open() failure path, from Govindarajulu Varadarajan. 6) Propagate dev_get_valid_name() error returns properly, from Li RongQing. 7) Fix suspend/resume in davinci_emac driver, from Bartosz Golaszewski. 8) Various act_ife fixes (recursive locking, IDR leaks, etc.) from Davide Caratti. 9) Fix buggy checksum handling in sungem driver, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) ip: limit use of gso_size to udp stmmac: fix DMA channel hang in half-duplex mode net: stmmac: socfpga: add additional ocp reset line for Stratix10 net: sungem: fix rx checksum support bpfilter: ignore binary files bpfilter: fix build error net/usb/drivers: Remove useless hrtimer_active check net/sched: act_ife: preserve the action control in case of error net/sched: act_ife: fix recursive lock and idr leak net: ethernet: fix suspend/resume in davinci_emac net: propagate dev_get_valid_name return code enic: do not overwrite error code net/tcp: Fix socket lookups with SO_BINDTODEVICE ptp: replace getnstimeofday64() with ktime_get_real_ts64() net/ipv6: respect rcu grace period before freeing fib6_info net: net_failover: fix typo in net_failover_slave_register() ipvlan: use ETH_MAX_MTU as max mtu net: hamradio: use eth_broadcast_addr enic: initialize enic->rfs_h.lock in enic_probe MAINTAINERS: Add Sam as the maintainer for NCSI ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - Wacom 2nd-gen Intuos Pro large Y axis handling fix from Jason Gerecke - fix for hibernation in Intel ISH driver, from Even Xu - crash fix for hid-steam driver, from Rodrigo Rivas Costa - new device ID addition to google-hammer driver * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: Correct logical maximum Y for 2nd-gen Intuos Pro large HID: intel_ish-hid: ipc: register more pm callbacks to support hibernation HID: steam: use hid_device.driver_data instead of hid_set_drvdata() HID: google: Add support for whiskers
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping rename from Christoph Hellwig: "Move all the dma-mapping code to kernel/dma and lose their dma-* prefixes" * tag 'dma-rename-4.18' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move all DMA mapping code to kernel/dma dma-mapping: use obj-y instead of lib-y for generic dma ops
-
Jason Gerecke authored
The HID descriptor for the 2nd-gen Intuos Pro large (PTH-860) contains a typo which defines an incorrect logical maximum Y value. This causes a small portion of the bottom of the tablet to become unusable (both because the area is below the "bottom" of the tablet and because 'wacom_wac_event' ignores out-of-range values). It also results in a skewed aspect ratio. To fix this, we add a quirk to 'wacom_usage_mapping' which overwrites the data with the correct value. Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> CC: stable@vger.kernel.org # v4.10+ Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Even Xu authored
Current ISH driver only registers suspend/resume PM callbacks which don't support hibernation (suspend to disk). Basically after hiberation, the ISH can't resume properly and user may not see sensor events (for example: screen rotation may not work). User will not see a crash or panic or anything except the following message in log: hid-sensor-hub 001F:8086:22D8.0001: timeout waiting for response from ISHTP device So this patch adds support for S4/hiberbation to ISH by using the SIMPLE_DEV_PM_OPS() MACRO instead of struct dev_pm_ops directly. The suspend and resume functions will now be used for both suspend to RAM and hibernation. If power management is disabled, SIMPLE_DEV_PM_OPS will do nothing, the suspend and resume related functions won't be used, so mark them as __maybe_unused to clarify that this is the intended behavior, and remove #ifdefs for power management. Cc: stable@vger.kernel.org Signed-off-by:
Even Xu <even.xu@intel.com> Acked-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
-
Rodrigo Rivas Costa authored
When creating the low-level hidraw device, the reference to steam_device was stored using hid_set_drvdata(). But this value is not guaranteed to be kept when set before calling probe. If this pointer is reset, it crashes when opening the emulated hidraw device. It looks like hid_set_drvdata() is for users "avobe" this hid_device, while hid_device.driver_data it for users "below" this one. In this case, we are creating a virtual hidraw device, so we must use hid_device.driver_data. Signed-off-by:
Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Tested-by:
Mariusz Ceier <mceier+kernel@gmail.com> Signed-off-by:
-
Linus Torvalds authored
The rewrite of the cmdline fetching missed the fact that we used to also return the final terminating NUL character of the last argument. I hadn't noticed, and none of the tools I tested cared, but something obviously must care, because Michal Kubecek noticed the change in behavior. Tweak the "find the end" logic to actually include the NUL character, and once past the eend of argv, always start the strnlen() at the expected (original) argument end. This whole "allow people to rewrite their arguments in place" is a nasty hack and requires that odd slop handling at the end of the argv array, but it's our traditional model, so we continue to support it. Repored-and-bisected-by:
Michal Kubecek <mkubecek@suse.cz> Reviewed-and-tested-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Willem de Bruijn authored
The ipcm(6)_cookie field gso_size is set only in the udp path. The ip layer copies this to cork only if sk_type is SOCK_DGRAM. This check proved too permissive. Ping and l2tp sockets have the same type. Limit to sockets of type SOCK_DGRAM and protocol IPPROTO_UDP to exclude ping sockets. v1 -> v2 - remove irrelevant whitespace changes Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT") Reported-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bhadram Varka authored
HW does not support Half-duplex mode in multi-queue scenario. Fix it by not advertising the Half-Duplex mode if multi-queue enabled. Signed-off-by:
Bhadram Varka <vbhadram@nvidia.com> Signed-off-by:
-
Dinh Nguyen authored
The Stratix10 platform has an additional reset line, OCP(Open Core Protocol), that also needs to get deasserted for the stmmac ethernet controller to work. Thus we need to update the Kconfig to include ARCH_STRATIX10 in order to build dwmac-socfpga. Also, remove the redundant check for the reset controller pointer. The reset driver already checks for the pointer and returns 0 if the pointer is NULL. Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
Eric Dumazet authored
After commit 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), sungem owners reported the infamous "eth0: hw csum failure" message. CHECKSUM_COMPLETE has in fact never worked for this driver, but this was masked by the fact that upper stacks had to strip the FCS, and therefore skb->ip_summed was set back to CHECKSUM_NONE before my recent change. Driver configures a number of bytes to skip when the chip computes the checksum, and for some reason only half of the Ethernet header was skipped. Then a second problem is that we should strip the FCS by default, unless the driver is updated to eventually support NETIF_F_RXFCS in the future. Finally, a driver should check if NETIF_F_RXCSUM feature is enabled or not, so that the admin can turn off rx checksum if wanted. Many thanks to Andreas Schwab and Mathieu Malaterre for their help in debugging this issue. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Meelis Roos <mroos@linux.ee> Reported-by:
Mathieu Malaterre <malat@debian.org> Reported-by:
Andreas Schwab <schwab@linux-m68k.org> Tested-by:
-
Matteo Croce authored
net/bpfilter/bpfilter_umh is a binary file generated when bpfilter is enabled, add it to .gitignore to avoid committing it. Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module") Signed-off-by:
Matteo Croce <mcroce@redhat.com> Signed-off-by:
-
Matteo Croce authored
bpfilter Makefile assumes that the system locale is en_US, and the parsing of objdump output fails. Set LC_ALL=C and, while at it, rewrite the objdump parsing so it spawns only 2 processes instead of 7. Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module") Signed-off-by:
-
Daniel Lezcano authored
The code does: if (hrtimer_active(&t)) hrtimer_cancel(&t); However, hrtimer_cancel() checks if the timer is active, so the test above is pointless. Signed-off-by:Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Davide Caratti authored
in the following script # tc actions add action ife encode allow prio pass index 42 # tc actions replace action ife encode allow tcindex drop index 42 the action control should remain equal to 'pass', if the kernel failed to replace the TC action. Pospone the assignment of the action control, to ensure it is not overwritten in the error path of tcf_ife_init(). Fixes: ef6980b6 ("introduce IFE action") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Davide Caratti authored
a recursive lock warning [1] can be observed with the following script, # $TC actions add action ife encode allow prio pass index 42 IFE type 0xED3E # $TC actions replace action ife encode allow tcindex pass index 42 in case the kernel was unable to run the last command (e.g. because of the impossibility to load 'act_meta_skbtcindex'). For a similar reason, the kernel can leak idr in the error path of tcf_ife_init(), because tcf_idr_release() is not called after successful idr reservation: # $TC actions add action ife encode allow tcindex index 47 IFE type 0xED3E RTNETLINK answers: No such file or directory We have an error talking to the kernel # $TC actions add action ife encode allow tcindex index 47 IFE type 0xED3E RTNETLINK answers: No space left on device We have an error talking to the kernel # $TC actions add action ife encode use mark 7 type 0xfefe pass index 47 IFE type 0xFEFE RTNETLINK answers: No space left on device We have an error talking to the kernel Since tcfa_lock is already taken when the action is being edited, a call to tcf_idr_release() wrongly makes tcf_idr_cleanup() take the same lock again. On the other hand, tcf_idr_release() needs to be called in the error path of tcf_ife_init(), to undo the last tcf_idr_create() invocation. Fix both problems in tcf_ife_init(). Since the cleanup() routine can now be called when ife->params is NULL, also add a NULL pointer check to avoid calling kfree_rcu(NULL, rcu). [1] ============================================ WARNING: possible recursive locking detected 4.17.0-rc4.kasan+ #417 Tainted: G E -------------------------------------------- tc/3932 is trying to acquire lock: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_cleanup+0x19/0x80 [act_ife] but task is already holding lock: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&p->tcfa_lock)->rlock); lock(&(&p->tcfa_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by tc/3932: #0: 000000007ca8e990 (rtnl_mutex){+.+.}, at: tcf_ife_init+0xf61/0x13c0 [act_ife] #1: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife] stack backtrace: CPU: 3 PID: 3932 Comm: tc Tainted: G E 4.17.0-rc4.kasan+ #417 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: dump_stack+0x9a/0xeb __lock_acquire+0xf43/0x34a0 ? debug_check_no_locks_freed+0x2b0/0x2b0 ? debug_check_no_locks_freed+0x2b0/0x2b0 ? debug_check_no_locks_freed+0x2b0/0x2b0 ? __mutex_lock+0x62f/0x1240 ? kvm_sched_clock_read+0x1a/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? find_held_lock+0x39/0x1d0 ? lock_acquire+0x10b/0x330 lock_acquire+0x10b/0x330 ? tcf_ife_cleanup+0x19/0x80 [act_ife] _raw_spin_lock_bh+0x38/0x70 ? tcf_ife_cleanup+0x19/0x80 [act_ife] tcf_ife_cleanup+0x19/0x80 [act_ife] __tcf_idr_release+0xff/0x350 tcf_ife_init+0xdde/0x13c0 [act_ife] ? ife_exit_net+0x290/0x290 [act_ife] ? __lock_is_held+0xb4/0x140 tcf_action_init_1+0x67b/0xad0 ? tcf_action_dump_old+0xa0/0xa0 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? kvm_sched_clock_read+0x1a/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? memset+0x1f/0x40 tcf_action_init+0x30f/0x590 ? tcf_action_init_1+0xad0/0xad0 ? memset+0x1f/0x40 tc_ctl_action+0x48e/0x5e0 ? mutex_lock_io_nested+0x1160/0x1160 ? tca_action_gd+0x990/0x990 ? sched_clock+0x5/0x10 ? find_held_lock+0x39/0x1d0 rtnetlink_rcv_msg+0x4da/0x990 ? validate_linkmsg+0x680/0x680 ? sched_clock_cpu+0x18/0x170 ? find_held_lock+0x39/0x1d0 netlink_rcv_skb+0x127/0x350 ? validate_linkmsg+0x680/0x680 ? netlink_ack+0x970/0x970 ? __kmalloc_node_track_caller+0x304/0x3a0 netlink_unicast+0x40f/0x5d0 ? netlink_attachskb+0x580/0x580 ? _copy_from_iter_full+0x187/0x760 ? import_iovec+0x90/0x390 netlink_sendmsg+0x67f/0xb50 ? netlink_unicast+0x5d0/0x5d0 ? copy_msghdr_from_user+0x206/0x340 ? netlink_unicast+0x5d0/0x5d0 sock_sendmsg+0xb3/0xf0 ___sys_sendmsg+0x60a/0x8b0 ? copy_msghdr_from_user+0x340/0x340 ? lock_downgrade+0x5e0/0x5e0 ? tty_write_lock+0x18/0x50 ? kvm_sched_clock_read+0x1a/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? find_held_lock+0x39/0x1d0 ? lock_downgrade+0x5e0/0x5e0 ? lock_acquire+0x10b/0x330 ? __audit_syscall_entry+0x316/0x690 ? current_kernel_time64+0x6b/0xd0 ? __fget_light+0x55/0x1f0 ? __sys_sendmsg+0xd2/0x170 __sys_sendmsg+0xd2/0x170 ? __ia32_sys_shutdown+0x70/0x70 ? syscall_trace_enter+0x57a/0xd60 ? rcu_read_lock_sched_held+0xdc/0x110 ? __bpf_trace_sys_enter+0x10/0x10 ? do_syscall_64+0x22/0x480 do_syscall_64+0xa5/0x480 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fd646988ba0 RSP: 002b:00007fffc9fab3c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fffc9fab4f0 RCX: 00007fd646988ba0 RDX: 0000000000000000 RSI: 00007fffc9fab440 RDI: 0000000000000003 RBP: 000000005b28c8b3 R08: 0000000000000002 R09: 0000000000000000 R10: 00007fffc9faae20 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffc9fab504 R14: 0000000000000001 R15: 000000000066c100 Fixes: 4e8c8615 ("net sched: net sched: ife action fix late binding") Fixes: ef6980b6 ("introduce IFE action") Signed-off-by:
-
- 19 Jun, 2018 9 commits
-
-
Bartosz Golaszewski authored
This patch reverts commit 3243ff2a ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching") and adds a comment which should stop anyone from reintroducing the same "fix" in the future. We can't use bus_find_device_by_name() here because the device name is not guaranteed to be 'davinci_mdio'. On some systems it can be 'davinci_mdio.0' so we need to use strncmp() against the first part of the string to correctly match it. Fixes: 3243ff2a ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching") Cc: stable@vger.kernel.org Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Li RongQing authored
if dev_get_valid_name failed, propagate its return code and remove the setting err to ENODEV, it will be set to 0 again before dev_change_net_namespace exits. Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
In failure path, we overwrite err to what vnic_rq_disable() returns. In case it returns 0, enic_open() returns success in case of error. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Fixes: e8588e26 ("enic: enable rq before updating rq descriptors") Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
David Ahern authored
Similar to 69678bcd ("udp: fix SO_BINDTODEVICE"), TCP socket lookups need to fail if dev_match is not true. Currently, a packet to a given port can match a socket bound to device when it should not. In the VRF case, this causes the lookup to hit a VRF socket and not a global socket resulting in a response trying to go through the VRF when it should not. Fixes: 3fa6f616 ("net: ipv4: add second dif to inet socket lookups") Fixes: 4297a0ef ("net: ipv6: add second dif to inet6 socket lookups") Reported-by:
Lou Berger <lberger@labn.net> Diagnosed-by:
Renato Westphal <renato@opensourcerouting.org> Tested-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
getnstimeofday64() is deprecated and getting replaced throughout the kernel with ktime_get_*() based helpers for a more consistent interface. The two functions do the exact same thing, so this is just a cosmetic change. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Eric Dumazet authored
syzbot reported use after free that is caused by fib6_info being freed without a proper RCU grace period. CPU: 0 PID: 1407 Comm: udevd Not tainted 4.17.0+ #39 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 __read_once_size include/linux/compiler.h:188 [inline] find_rr_leaf net/ipv6/route.c:705 [inline] rt6_select net/ipv6/route.c:761 [inline] fib6_table_lookup+0x12b7/0x14d0 net/ipv6/route.c:1823 ip6_pol_route+0x1c2/0x1020 net/ipv6/route.c:1856 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2082 fib6_rule_lookup+0x211/0x6d0 net/ipv6/fib6_rules.c:122 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2110 ip6_route_output include/net/ip6_route.h:82 [inline] icmpv6_xrlim_allow net/ipv6/icmp.c:211 [inline] icmp6_send+0x147c/0x2da0 net/ipv6/icmp.c:535 icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43 ip6_link_failure+0xa5/0x790 net/ipv6/route.c:2244 dst_link_failure include/net/dst.h:427 [inline] ndisc_error_report+0xd1/0x1c0 net/ipv6/ndisc.c:695 neigh_invalidate+0x246/0x550 net/core/neighbour.c:892 neigh_timer_handler+0xaf9/0xde0 net/core/neighbour.c:978 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x79e/0xc50 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1d1/0x200 kernel/softirq.c:404 exiting_irq arch/x86/include/asm/apic.h:527 [inline] smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863 </IRQ> RIP: 0010:strlen+0x5e/0xa0 lib/string.c:482 Code: 24 00 74 3b 48 bb 00 00 00 00 00 fc ff df 4c 89 e0 48 83 c0 01 48 89 c2 48 89 c1 48 c1 ea 03 83 e1 07 0f b6 14 1a 38 ca 7f 04 <84> d2 75 23 80 38 00 75 de 48 83 c4 08 4c 29 e0 5b 41 5c 5d c3 48 RSP: 0018:ffff8801af117850 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffff880197f53bd0 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff81c5b06c RDI: ffff880197f53bc0 RBP: ffff8801af117868 R08: ffff88019a976540 R09: 0000000000000000 R10: ffff88019a976540 R11: 0000000000000000 R12: ffff880197f53bc0 R13: ffff880197f53bc0 R14: ffffffff899e4e90 R15: ffff8801d91c6a00 strlen include/linux/string.h:267 [inline] getname_kernel+0x24/0x370 fs/namei.c:218 open_exec+0x17/0x70 fs/exec.c:882 load_elf_binary+0x968/0x5610 fs/binfmt_elf.c:780 search_binary_handler+0x17d/0x570 fs/exec.c:1653 exec_binprm fs/exec.c:1695 [inline] __do_execve_file.isra.35+0x16fe/0x2710 fs/exec.c:1819 do_execveat_common fs/exec.c:1866 [inline] do_execve fs/exec.c:1883 [inline] __do_sys_execve fs/exec.c:1964 [inline] __se_sys_execve fs/exec.c:1959 [inline] __x64_sys_execve+0x8f/0xc0 fs/exec.c:1959 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f1576a46207 Code: 77 19 f4 48 89 d7 44 89 c0 0f 05 48 3d 00 f0 ff ff 76 e0 f7 d8 64 41 89 01 eb d8 f7 d8 64 41 89 01 eb df b8 3b 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 02 f3 c3 48 8b 15 00 8c 2d 00 f7 d8 64 89 02 RSP: 002b:00007ffff2784568 EFLAGS: 00000202 ORIG_RAX: 000000000000003b RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f1576a46207 RDX: 0000000001215b10 RSI: 00007ffff2784660 RDI: 00007ffff2785670 RBP: 0000000000625500 R08: 000000000000589c R09: 000000000000589c R10: 0000000000000000 R11: 0000000000000202 R12: 0000000001215b10 R13: 0000000000000007 R14: 0000000001204250 R15: 0000000000000005 Allocated by task 12188: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620 kmalloc include/linux/slab.h:513 [inline] kzalloc include/linux/slab.h:706 [inline] fib6_info_alloc+0xbb/0x280 net/ipv6/ip6_fib.c:152 ip6_route_info_create+0x782/0x2b50 net/ipv6/route.c:3013 ip6_route_add+0x23/0xb0 net/ipv6/route.c:3154 ipv6_route_ioctl+0x5a5/0x760 net/ipv6/route.c:3660 inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546 sock_do_ioctl+0xe4/0x3e0 net/socket.c:973 sock_ioctl+0x30d/0x680 net/socket.c:1097 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 __do_sys_ioctl fs/ioctl.c:708 [inline] __se_sys_ioctl fs/ioctl.c:706 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 1402: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xd9/0x260 mm/slab.c:3813 fib6_info_destroy+0x29b/0x350 net/ipv6/ip6_fib.c:207 fib6_info_release include/net/ip6_fib.h:286 [inline] __ip6_del_rt_siblings net/ipv6/route.c:3235 [inline] ip6_route_del+0x11c4/0x13b0 net/ipv6/route.c:3316 ipv6_route_ioctl+0x616/0x760 net/ipv6/route.c:3663 inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546 sock_do_ioctl+0xe4/0x3e0 net/socket.c:973 sock_ioctl+0x30d/0x680 net/socket.c:1097 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 __do_sys_ioctl fs/ioctl.c:708 [inline] __se_sys_ioctl fs/ioctl.c:706 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801b5df2580 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 8 bytes inside of 256-byte region [ffff8801b5df2580, ffff8801b5df2680) The buggy address belongs to the page: page:ffffea0006d77c80 count:1 mapcount:0 mapping:ffff8801da8007c0 index:0xffff8801b5df2e40 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffffea0006c5cc48 ffffea0007363308 ffff8801da8007c0 raw: ffff8801b5df2e40 ffff8801b5df2080 0000000100000006 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801b5df2480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801b5df2500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc > ffff8801b5df2580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801b5df2600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801b5df2680: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb Fixes: a64efe14 ("net/ipv6: introduce fib6_info struct and helpers") Signed-off-by: -
Liran Alon authored
Sync both unicast and multicast lists instead of unicast twice. Fixes: cfc80d9a ("net: Introduce net_failover driver") Reviewed-by:
Joao Martins <joao.m.martins@oracle.com> Signed-off-by:
Liran Alon <liran.alon@oracle.com> Signed-off-by:
-
Xin Long authored
Similar to the fixes on team and bonding, this restores the ability to set an ipvlan device's mtu to anything higher than 1500. Fixes: 91572088 ("net: use core MTU range checking in core net infra") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Stefan Agner authored
The array bpq_eth_addr is only used to get the size of an address, whereas the bcast_addr is used to set the broadcast address. This leads to a warning when using clang: drivers/net/hamradio/bpqether.c:94:13: warning: variable 'bpq_eth_addr' is not needed and will not be emitted [-Wunneeded-internal-declaration] static char bpq_eth_addr[6]; ^ Remove both variables and use the common eth_broadcast_addr to set the broadcast address. Signed-off-by:Stefan Agner <stefan@agner.ch> Signed-off-by:
-
