In many instances regmap_update_bits() is used for simple bit setting
and clearing. In these cases the last argument is redundant and we can
hide it with a static inline function.

This adds three new helpers for simple bit operations: set_bits,
clear_bits and test_bits (the last one defined as a regular function).
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The caller doesn't care about the error codes, they only check for zero
vs non-zero.  Still, it's better to preserve the negative error codes
from alloc_uld_rxqs() instead of changing it to 1.  We can also return
directly if there is a failure.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
Fix infinite loop in bridge and vxlan modules

When suppressing invalid IPv6 Neighbour Solicitation messages, it is
possible for the bridge and vxlan modules to get stuck in an infinite
loop. See the individual changelogs for detailed explanation of the
problem and solution.

The bug was originally reported against the bridge module, but after
auditing the code base I found that the buggy code was copied from the
vxlan module. This patch set fixes both modules. Could not find more
instances of the problem.

Please consider both patches for stable releases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When proxy mode is enabled the vxlan device might reply to Neighbor
Solicitation (NS) messages on behalf of remote hosts.

In case the NS message includes the "Source link-layer address" option
[1], the vxlan device will use the specified address as the link-layer
destination address in its reply.

To avoid an infinite loop, break out of the options parsing loop when
encountering an option with length zero and disregard the NS message.

This is consistent with the IPv6 ndisc code and RFC 4886 which states
that "Nodes MUST silently discard an ND packet that contains an option
with length zero" [2].

[1] https://tools.ietf.org/html/rfc4861#section-4.3
[2] https://tools.ietf.org/html/rfc4861#section-4.6

Fixes: 4b29dba9 ("vxlan: fix nonfunctional neigh_reduce()")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When neighbor suppression is enabled the bridge device might reply to
Neighbor Solicitation (NS) messages on behalf of remote hosts.

In case the NS message includes the "Source link-layer address" option
[1], the bridge device will use the specified address as the link-layer
destination address in its reply.

To avoid an infinite loop, break out of the options parsing loop when
encountering an option with length zero and disregard the NS message.

This is consistent with the IPv6 ndisc code and RFC 4886 which states
that "Nodes MUST silently discard an ND packet that contains an option
with length zero" [2].

[1] https://tools.ietf.org/html/rfc4861#section-4.3
[2] https://tools.ietf.org/html/rfc4861#section-4.6

Fixes: ed842fae ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alla Segal <allas@mellanox.com>
Tested-by: Alla Segal <allas@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After allocating the spare nexthop group it should be tested for kzalloc()
returning NULL, instead the already used nexthop group (which cannot be
NULL at this point) had been tested so far.

Additionally, if kzalloc() fails, return ERR_PTR(-ENOMEM) instead of NULL.

Coverity-id: 1463885
Reported-by: Coverity <scan-admin@coverity.com>
Signed-off-by: Patrick Eigensatz <patrickeigensatz@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2020-06-01

Here's one last bluetooth-next pull request for 5.8, which I hope can
still be accepted.

 - Enabled Wide-Band Speech (WBS) support for Qualcomm wcn3991
 - Multiple fixes/imprvovements to Qualcomm-based devices
 - Fix GAP/SEC/SEM/BI-10-C qualfication test case
 - Added support for Broadcom BCM4350C5 device
 - Several other smaller fixes & improvements

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

QCA6390 memdump VSE sometimes come to bluetooth driver
with wrong sequence number as illustrated as follows:
frame # in dec: frame data in hex
1396: ff fd 01 08 74 05 00 37 8f 14
1397: ff fd 01 08 75 05 00 ff bf 38
1414: ff fd 01 08 86 05 00 fb 5e 4b
1399: ff fd 01 08 77 05 00 f3 44 0a
1400: ff fd 01 08 78 05 00 ca f7 41
it is mistook for controller missing packets, so results
in page fault after overwriting memdump buffer allocated.

Fixed by ignoring QCA6390 sequence number check and
checking buffer space before writing.
Signed-off-by: Zijun Hu <zijuhu@codeaurora.org>
Tested-by: Zijun Hu <zijuhu@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

serdev_device_write() is not appropriate at here because
serdev_device_write_wakeup() is not used to release completion hold
by the former at @write_wakeup member of struct serdev_device_ops.

Fix by using serdev_device_write_buf() instead of serdev_device_write().
Signed-off-by: Zijun Hu <zijuhu@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Controller ID info got by VSC EDL_PATCH_GETVER is very
important, so improve its log level from DEBUG to INFO.
Signed-off-by: Zijun Hu <zijuhu@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.

The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-next-for-davem-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Another set of changes, including
 * many 6 GHz changes, though it's not _quite_ complete
   (I left out scanning for now, we're still discussing)
 * allow userspace SA-query processing for operating channel
   validation
 * TX status for control port TX, for AP-side operation
 * more per-STA/TID control options
 * move to kHz for channels, for future S1G operation
 * various other small changes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Yes, staying withing 80 columns is certainly still _preferred_.  But
it's not the hard limit that the checkpatch warnings imply, and other
concerns can most certainly dominate.

Increase the default limit to 100 characters.  Not because 100
characters is some hard limit either, but that's certainly a "what are
you doing" kind of value and less likely to be about the occasional
slightly longer lines.

Miscellanea:

 - to avoid unnecessary whitespace changes in files, checkpatch will no
   longer emit a warning about line length when scanning files unless
   --strict is also used

 - Add a bit to coding-style about alignment to open parenthesis
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 fixes from Thomas Gleixner:
 "A pile of x86 fixes:

   - Prevent a memory leak in ioperm which was caused by the stupid
     assumption that the exit cleanup is always called for current,
     which is not the case when fork fails after taking a reference on
     the ioperm bitmap.

   - Fix an arithmething overflow in the DMA code on 32bit systems

   - Fill gaps in the xstate copy with defaults instead of leaving them
     uninitialized

   - Revert: "Make __X32_SYSCALL_BIT be unsigned long" as it turned out
     that existing user space fails to build"

* tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioperm: Prevent a memory leak when fork fails
  x86/dma: Fix max PFN arithmetic overflow on 32 bit systems
  copy_xstate_to_kernel(): don't leave parts of destination uninitialized
  x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"

Pull scheduler fix from Thomas Gleixner:
 "A single scheduler fix preventing a crash in NUMA balancing.

  The current->mm check is not reliable as the mm might be temporary due
  to use_mm() in a kthread. Check for PF_KTHREAD explictly"

* tag 'sched-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Don't NUMA balance for kthreads

Pull networking fixes from David Miller:
 "Another week, another set of bug fixes:

   1) Fix pskb_pull length in __xfrm_transport_prep(), from Xin Long.

   2) Fix double xfrm_state put in esp{4,6}_gro_receive(), also from Xin
      Long.

   3) Re-arm discovery timer properly in mac80211 mesh code, from Linus
      Lüssing.

   4) Prevent buffer overflows in nf_conntrack_pptp debug code, from
      Pablo Neira Ayuso.

   5) Fix race in ktls code between tls_sw_recvmsg() and
      tls_decrypt_done(), from Vinay Kumar Yadav.

   6) Fix crashes on TCP fallback in MPTCP code, from Paolo Abeni.

   7) More validation is necessary of untrusted GSO packets coming from
      virtualization devices, from Willem de Bruijn.

   8) Fix endianness of bnxt_en firmware message length accesses, from
      Edwin Peer.

   9) Fix infinite loop in sch_fq_pie, from Davide Caratti.

  10) Fix lockdep splat in DSA by setting lockless TX in netdev features
      for slave ports, from Vladimir Oltean.

  11) Fix suspend/resume crashes in mlx5, from Mark Bloch.

  12) Fix use after free in bpf fmod_ret, from Alexei Starovoitov.

  13) ARP retransmit timer guard uses wrong offset, from Hongbin Liu.

  14) Fix leak in inetdev_init(), from Yang Yingliang.

  15) Don't try to use inet hash and unhash in l2tp code, results in
      crashes. From Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
  l2tp: add sk_family checks to l2tp_validate_socket
  l2tp: do not use inet_hash()/inet_unhash()
  net: qrtr: Allocate workqueue before kernel_bind
  mptcp: remove msk from the token container at destruction time.
  mptcp: fix race between MP_JOIN and close
  mptcp: fix unblocking connect()
  net/sched: act_ct: add nat mangle action only for NAT-conntrack
  devinet: fix memleak in inetdev_init()
  virtio_vsock: Fix race condition in virtio_transport_recv_pkt
  drivers/net/ibmvnic: Update VNIC protocol version reporting
  NFC: st21nfca: add missed kfree_skb() in an error path
  neigh: fix ARP retransmit timer guard
  bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones
  bpf, selftests: Verifier bounds tests need to be updated
  bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones
  bpf: Fix use-after-free in fmod_ret check
  net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta()
  net/mlx5e: Fix MLX5_TC_CT dependencies
  net/mlx5e: Properly set default values when disabling adaptive moderation
  net/mlx5e: Fix arch depending casting issue in FEC
  ...

With some newer AKMs, the KCK and KEK are bigger, so allow that
if the driver advertises support for it. In addition, add a new
attribute for the AKM so we can use it for offloaded rekeying.
Signed-off-by: Nathan Errera <nathan.errera@intel.com>
[reword commit message]
Link: https://lore.kernel.org/r/20200528212237.5eb58b00a5d1.I61b09d77c4f382e8d58a05dcca78096e99a6bc15@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Set short slot also for 6 GHz band, just like 5 GHz.
Signed-off-by: Tova Mussai <tova.mussai@intel.com>
Link: https://lore.kernel.org/r/20200528213443.75f38e6f5efd.I272fbae402b03123f04e9ae69204eeab960c70cd@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Treat it like the 5 GHz band.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Link: https://lore.kernel.org/r/20200528213443.889e5c9dd006.Id8ed3bb8000ba8738be5df05639415eb2e23c61a@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

On 6 GHz, stations don't have ht_supported set, but they can
still do aggregation since they must have HE, allow that.

Link: https://lore.kernel.org/r/20200528213443.776d3c891b64.Ifa099d450617b50c691832b3c4aa08959fab520a@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

On 6 GHz band, HE capabilities must be available for all of
the interface types, otherwise we shouldn't use 6 GHz. Check
this.

Link: https://lore.kernel.org/r/20200528213443.5881cb3c8c4a.I583b54172f91f98d44af64a16c5826fe458cbb27@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

On the 6 GHz band, HE should be used, but without any direct HT/VHT
capabilities, instead the HE 6 GHz band capabilities will capture
the relevant information. Reject HT/VHT capabilities here.

Link: https://lore.kernel.org/r/20200528213443.bfe89c35459a.Ibba5e066fa0087fd49d13cfee89d196ea0c68ae2@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

If a 6 GHz channel exists, then we can probably safely assume that
the device actually supports it, and then it should support most
bandwidths.

This will probably need to be extended to check the interface type
and then dig into the HE capabilities for that though, to have the
correct bandwidth check.

Link: https://lore.kernel.org/r/20200528213443.d4864ef52e92.I82f09b2b14a56413ce20376d09967fe954a033eb@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

On 6 GHz, the 6 GHz capabilities element should be added, do that.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
[add commit message]
Link: https://lore.kernel.org/r/20200528213443.8ee764f0cde0.I2b0c66b60e11818c97c9803e04a6a197c6376243@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

In order to handle 6 GHz AP side, take the HE 6 GHz band capability
data and pass it to the driver (which needs it for A-MPDU spacing
and A-MPDU length).

Link: https://lore.kernel.org/r/1589399105-25472-6-git-send-email-rmanohar@codeaurora.orgCo-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/20200528213443.784e4890d82f.I5f1230d5ab27e84e7bbe88e3645b24ea15a0c146@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

An AP supporting EMA (Enhanced Multi-BSSID advertisement) should set
bit 83 in the extended capabilities IE (9.4.2.26 in the 802.11ax D5 spec).
So the *3rd* bit of the 10th byte should be checked.
Also, in one place, the wrong byte was checked.
(cfg80211_find_ie returns a pointer to the beginning of the IE,
 so the data really starts at ie[2], so the 10th byte
 should be ie[12]. To avoid this confusion, use cfg80211_find_elem
 instead).
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Link: https://lore.kernel.org/r/20200528213443.4316121fa2a3.I9745582f8d41ad8e689dac0fefcd70b276d7c1ea@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Support connecting to HE 6 GHz APs and mesh networks on 6 GHz,
where the HT/VHT information is missing but instead the HE 6 GHz
band capability is present, and the 6 GHz Operation information
field is used to encode the channel configuration instead of the
HT/VHT operation elements.

Also add some other bits needed to connect to 6 GHz networks.

Link: https://lore.kernel.org/r/1589399105-25472-10-git-send-email-rmanohar@codeaurora.orgCo-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/20200528213443.25687d2695bc.I3f9747c1147480f65445f13eda5c4a5ed4e86757@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

If the AP advertises inconsistent data, namely it has CCFS1 or CCFS2,
but doesn't advertise support for 160/80+80 bandwidth or "Extended NSS
BW Support", then we cannot use any MCSes in the the higher bandwidth.
Thus, avoid connecting with higher bandwidth since it's less efficient
that way.

Link: https://lore.kernel.org/r/20200528213443.0e55d40c3ccc.I6fd0b4708ebd087e5e46466c3e91f6efbcbef668@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

As HT/VHT elements are not allowed in 6 GHz band, do not include
them in mesh beacon template formation.
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1589399105-25472-9-git-send-email-rmanohar@codeaurora.org
Link: https://lore.kernel.org/r/20200528193455.76796-2-johannes@sipsolutions.netSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Add 6 GHz operation information (IEEE 802.11ax/D6.0, Figure 9-787k)
while building HE operation element for non-HE AP. This field is used to
determine channel information in the absence of HT/VHT IEs.
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1589399105-25472-8-git-send-email-rmanohar@codeaurora.org
[fix skb allocation size]
Link: https://lore.kernel.org/r/20200528193455.76796-1-johannes@sipsolutions.netSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Construct HE 6 GHz band capability element (IEEE 802.11ax/D6.0,
9.4.2.261) for association request and mesh beacon. The 6 GHz
capability information is passed by driver through iftypes caps.
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1589399105-25472-7-git-send-email-rmanohar@codeaurora.org
[handle SMPS, adjust for previous patches, reserve SKB space properly,
 change to handle SKB directly]
Link: https://lore.kernel.org/r/20200528213443.643aa8101111.I3f9747c1147480f65445f13eda5c4a5ed4e86757@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

These capabilities cover what would otherwise be transported
in HT/VHT capabilities, but only a subset thereof that is
actually needed on 6 GHz with HE already present. Expose the
capabilities to userspace, drivers are expected to set them
as using the 6 GHz band (currently) requires HE capability.

Link: https://lore.kernel.org/r/20200528213443.244cd5cb9db8.Icd8c773277a88c837e7e3af1d4d1013cc3b66543@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Handle 6 GHz band capability element parsing for association.
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1589399105-25472-4-git-send-email-rmanohar@codeaurora.org
[some renaming to be in line with previous patches]
Link: https://lore.kernel.org/r/20200528213443.a13d7a0b85b0.Ia07584da4fc77aa77c4cc563248d2ce4234ffe5d@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Handle 6 GHz HE capability while adding new station. It will be used
later in mac80211 station processing.
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1589399105-25472-2-git-send-email-rmanohar@codeaurora.org
[handle nl80211_set_station, require WME,
 remove NL80211_HE_6GHZ_CAPABILITY_LEN]
Link: https://lore.kernel.org/r/20200528213443.b6b711fd4312.Ic9b97d57b6c4f2b28d4b2d23d2849d8bc20bd8cc@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Add the HE extended element IDs and the definitions for the
HE 6 GHz band capabilities element, from Draft 5.0.

Link: https://lore.kernel.org/r/20200528213443.1a6689fe093f.Ifdc5400fb01779351354daf38663ebeea03c9ad9@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Add some code to obtain and parse the 6 GHz operation field
inside the HE operation element.

While at it, fix the required length using sizeof() the new
struct, which is 5 instead of 4 now.

Link: https://lore.kernel.org/r/20200528213443.42ca72c45ca9.Id74bc1b03da9ea6574f9bc70deeb60dfc1634359@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Add the necessary definitions to parse reduced neighbor
report elements.
Signed-off-by: Tova Mussai <tova.mussai@intel.com>
[change struct name, remove IEEE80211_MIN_AP_NEIGHBOR_INFO_SIZE]
Link: https://lore.kernel.org/r/20200528213443.4f9154461c06.I518d9898ad982f838112ea9ca14a20d6bbb16394@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

This allows identifying whether or not a channel is a PSC
(preferred scanning channel).

Link: https://lore.kernel.org/r/20200528213443.414363ecf62c.Ic15e681a0e249eab7350a06ceb582cca8bb9a080@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

My previous commit here was wrong, it didn't check the new
flag in two necessary places, so things didn't work. Fix that.

Fixes: 155d7c73 ("nl80211: allow client-only BIGTK support")
Link: https://lore.kernel.org/r/20200528213443.993f108e96ca.I0086ae42d672379380d04ac5effb2f3d5135731b@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

The 6GHz band does not have regulatory approval yet, but things are
moving forward. However, that has led to a change in the channelization
of the 6GHz band which has been accepted in the 11ax specification. It
also fixes a missing MHZ_TO_KHZ() macro for 6GHz channels while at it.

This change is primarily thrown in to discuss how to deal with it.
I noticed ath11k adding 6G support with old channelization and ditto
for iw. It probably involves changes in hostapd as well.

Cc: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Cc: Jouni Malinen <jouni@w1.fi>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://lore.kernel.org/r/edf07cdd-ad15-4012-3afd-d8b961a80b69@broadcom.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>