An error occurred fetching the project authors.
- 14 Jun, 2016 1 commit
-
-
Lars Ellenberg authored
The intention was to only suspend IO if some normal bitmap operation is supposed to be locked out, not always. If the bulk operation is flaged as BM_LOCKED_CHANGE_ALLOWED, we do not need to suspend IO. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
- 07 Jun, 2016 2 commits
-
-
Mike Christie authored
To avoid confusion between REQ_OP_FLUSH, which is handled by request_fn drivers, and upper layers requesting the block layer perform a flush sequence along with possibly a WRITE, this patch renames REQ_FLUSH to REQ_PREFLUSH. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Mike Christie authored
Separate the op from the rq_flag_bits and have drbd set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
- 12 Apr, 2016 1 commit
-
-
Jens Axboe authored
Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
- 27 Jan, 2016 1 commit
-
-
Herbert Xu authored
This patch replaces uses of the long obsolete hash interface with either shash (for non-SG users) or ahash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 25 Nov, 2015 8 commits
-
-
Lars Ellenberg authored
Disconnect should wait for pending bitmap IO. But if that bitmap IO is not happening, because it is waiting for pending application IO, and there is no progress, because the fencing policy suspended application IO because of the disconnect, then we deadlock. The bitmap writeout in this case does not care for concurrent application IO, so there is no point waiting for it. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Lars Ellenberg authored
lsblk should be able to pick up stacking device driver relations involving DRBD conveniently. Even though upstream kernel since 2011 says "DON'T USE THIS UNLESS YOU'RE ALREADY USING IT." a new user has been added since (bcache), which sets the precedences for us to use it as well. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Lars Ellenberg authored
When accessing out meta data area on disk, we double check the plausibility of the requested sector offsets, and are very noisy about it if they look suspicious. During initial read of our "superblock", for "external" meta data, this triggered because the range estimate returned by drbd_md_last_sector() was still wrong. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Lars Ellenberg authored
Since kernel 3.3, we can use snprintf-style arguments to create a workqueue. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Philipp Reisner authored
The intention is to reduce CPU utilization. Recent measurements unveiled that the current performance bottleneck is CPU utilization on the receiving node. The asender thread became CPU limited. One of the main points is to eliminate the idr_for_each_entry() loop from the sending acks code path. One exception in that is sending back ping_acks. These stay in the ack-receiver thread. Otherwise the logic becomes too complicated for no added value. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Philipp Reisner authored
This prepares the next patch where the sending on the meta (or control) socket is moved to a dedicated workqueue. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Andreas Gruenbacher authored
Instead of using a rwlock for synchronizing state changes across resources, take the request locks of all resources for global state changes. Use resources_mutex to serialize global state changes. This means that taking the request lock of a resource is now enough to prevent changes of that resource. (Previously, a read lock on the global state lock was needed as well.) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Andreas Gruenbacher authored
Also change the enum values to all-capital letters. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
- 13 Aug, 2015 1 commit
-
-
Kent Overstreet authored
As generic_make_request() is now able to handle arbitrarily sized bios, it's no longer necessary for each individual block driver to define its own ->merge_bvec_fn() callback. Remove every invocation completely. Cc: Jens Axboe <axboe@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: drbd-user@lists.linbit.com Cc: Jiri Kosina <jkosina@suse.cz> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@kernel.org> Cc: ceph-devel@vger.kernel.org Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Neil Brown <neilb@suse.de> Cc: linux-raid@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: NeilBrown <neilb@suse.de> (for the 'md' bits) Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: also remove ->merge_bvec_fn() in dm-thin as well as dm-era-target, and resolve merge conflicts] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
- 02 Jun, 2015 1 commit
-
-
Tejun Heo authored
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback) and the role of the separation is unclear. For cgroup support for writeback IOs, a bdi will be updated to host multiple wb's where each wb serves writeback IOs of a different cgroup on the bdi. To achieve that, a wb should carry all states necessary for servicing writeback IOs for a cgroup independently. This patch moves bdi->state into wb. * enum bdi_state is renamed to wb_state and the prefix of all enums is changed from BDI_ to WB_. * Explicit zeroing of bdi->state is removed without adding zeoring of wb->state as the whole data structure is zeroed on init anyway. * As there's still only one bdi_writeback per backing_dev_info, all uses of bdi->state are mechanically replaced with bdi->wb.state introducing no behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: drbd-dev@lists.linbit.com Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
- 25 Mar, 2015 1 commit
-
-
David Rientjes authored
Mempools created for slab caches should use mempool_create_slab_pool(). Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
- 10 Nov, 2014 2 commits
-
-
Andreas Gruenbacher authored
Avoid generic netlink calls in other parts of the code base. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Andreas Gruenbacher authored
. Update comments . drbd_set_{in,out_of}_sync(): Remove unused parameters . Move common code into adm_del_resource() . Redefine ERR_MINOR_EXISTS -> ERR_MINOR_OR_VOLUME_EXISTS Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
- 11 Sep, 2014 1 commit
-
-
Andreas Gruenbacher authored
Rename local variable 'ds' to 'disk_state' or 'data_size'. 'dgs' to 'digest_size' Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
- 10 Jul, 2014 20 commits
-
-
Lars Ellenberg authored
Don't error out with misleading "out of memory" if the cpu-mask has more bits set than there are CPUs. Just truncate to nr_cpu_ids implicitly. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
* Add details about pending meta data operations to in_flight_summary. * Report number of requests waiting for activity log transactions. * timing details of peer_requests to in_flight_summary. * FLUSH details DRBD devides the incoming request stream into "epochs", in which peers are allowed to re-order writes independendly. These epochs are separated by P_BARRIER on the replication link. Such barrier packets, depending on configuration, may cause the receiving side to drain the lower level device request queues and call blkdev_issue_flush(). This is known to be an other major source of latency in DRBD. Track timing details of calls to blkdev_issue_flush(), and add them to in_flight_summary. * data socket stats To be able to diagnose bottlenecks and root causes of "slow" IO on DRBD, it is useful to see network buffer stats along with the timing details of requests, peer requests, and meta data IO. * pending bitmap IO timing details to in_flight_summary. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
Add new debugfs hierarchy /sys/kernel/debug/ drbd/ resources/ $resource_name/connections/peer/$volume_number/ $resource_name/volumes/$volume_number/ minors/$minor_number -> ../resources/$resource_name/volumes/$volume_number/ Followup commits will populate this hierarchy with files containing statistics, diagnostic information and some attribute data. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
Track start and submit time of bitmap operations, and add pending bitmap IO contexts to a new pending_bitmap_io list. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
Background resynchronisation does some "side-stepping", or throttles itself, if it detects application IO activity, and the current resync rate estimate is above the configured "cmin-rate". What was not detected: if there is no application IO, because it blocks on activity log transactions. Introduce a new atomic_t ap_actlog_cnt, tracking such blocked requests, and count non-zero as application IO activity. This counter is exposed at proc_details level 2 and above. Also make sure to release the currently locked resync extent if we side-step due to such voluntary throttling. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
Adding requests to per-device fifo lists as soon as possible after allocating them leaves a simple list_first_entry_or_null() to find the oldest request, regardless what it is still waiting for. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
Record (in jiffies) how much time a request spends in which stages. Followup commits will use and present this additional timing information so we can better locate and tackle the root causes of latency spikes, or present the backlog for asynchronous replication. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
For diagnostic purposes, track intent, start time and latest submit time of meta data IO. Move separate members from struct drbd_device into the embeded struct drbd_md_io. s/md_io_(page|in_use)/md_io.\1/ Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
drbd_destroy_device means to give up reference counts on the connection(s) reachable via the peer_device(s). It must not do that by iterating via device->resource->connections, resource and connections may have already been disassociated by drbd_free_resource, and we'd leak connection refs. Instead, iterate via device->peer_devices->connection. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
Now that we have additional asynchronous kref_get/kref_put via debugfs, make sure we catch access after free. Poison struct drbd_device, drbd_connection and drbd_resource before kfree() with 0xfd, 0xfc, and 0xf2, respectively. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
Cosmetic change only. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
If "dirty" blocks are written to during resync, that brings them in-sync. By explicitly requesting write-acks during resync even in protocol != C, we now can actually respect this. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Andreas Gruenbacher authored
Get rid of dump_stack() debug statements. There is no point whatsoever in registering and unregistering a reboot notifier that doesn't do anything. The intention was to switch to an "emergency read-only" mode, so we won't have to resync the full activity log just because we had been Primary before the reboot. Once we have that implemented, we may re-introduce the reboot notifier. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
This replaces the md_sync_work member of struct drbd_device by a new MD_SYNC "work bit" in device->flags. This replaces the resync_start_work member of struct drbd_device by a new RS_START "work bit" in device->flags. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
The recent fix to put_ldev() (correct ordering of access to local_cnt and state.disk; memory barrier in __drbd_set_state) guarantees that the cleanup happens exactly once. However it does not yet guarantee that the cleanup happens from worker context, the last put_ldev() may still happen from atomic context, which must not happen: blkdev_put() may sleep. Fix this by scheduling the cleanup to the worker instead, using a couple more bits in device->flags and a new helper, drbd_device_post_work(). Generalized the "resync progress" work to cover these new work bits. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
This should reduce latency for such in-DRBD-protocol "pings", and may help reduce spurious disconnect/reconnect cycles due to "PingAck did not arrive in time." Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Philipp Reisner authored
Since the member of drbd_device is called ldev Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Philipp Reisner authored
Some parts of the code assumed that get_ldev_if_state(device, D_ATTACHING) is sufficient to access the ldev member of the device object. That was wrong. ldev may not be there or might be freed at any time if the device has a disk state of D_ATTACHING. bm_rw() Documented that drbd_bm_read() is only called from drbd_adm_attach. drbd_bm_write() is only called when a reference is held, and it is documented that a caller has to hold a reference before calling drbd_bm_write() drbd_bm_write_page() Use get_ldev() instead of get_ldev_if_state(device, D_ATTACHING) drbd_bmio_set_n_write() No longer use get_ldev_if_state(device, D_ATTACHING). All callers hold a reference to ldev now. drbd_bmio_clear_n_write() All callers where holding a reference of ldev anyways. Remove the misleading get_ldev_if_state(device, D_ATTACHING) drbd_reconsider_max_bio_size() Removed the get_ldev_if_state(device, D_ATTACHING). All callers now pass a struct drbd_backing_dev* when they have a proper reference, or a NULL pointer. Before this fix, the receiver could trigger a NULL pointer deref when in drbd_reconsider_max_bio_size() drbd_bump_write_ordering() Used get_ldev_if_state(device, D_ATTACHING) with the wrong assumption. Remove it, and allow the caller to pass in a struct drbd_backing_dev* when the caller knows that accessing this bdev is safe. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Philipp Reisner authored
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
- 30 Apr, 2014 1 commit
-
-
Lars Ellenberg authored
Note that I do NOT call __drbd_chk_io_error for failed REQ_DISCARD. That may be wrong, though, or needs to differ between EOPNOTSUPP and other errors... Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-